micropython-bmp280

• https://www.adafruit.com/product/2651
• https://www.bosch-sensortec.com/products/environmental-sensors/pressure-sensors/pressure-sensors-bmp280-1.html
• https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp280-ds001.pdf

Inspired by
https://github.com/vitally/BMP280
https://github.com/micropython-IMU/micropython-bmp180

Constructor

BMP280(i2c_bus, addr=0x76, use_case=BMP280_CASE_HANDHELD_DYN)

• i2c_bus - the I2C bus to use
• addr - I2C address of the BMP280 (always the same)
• use_case - Use case to start the BMP280 with. Set to None to disable measuring on boot.

Enums

Values for different settings are defined in the following constants. Reference to manual section in parenthesis.

Use cases (See 3.4, 3.8.2)

• BMP280_CASE_HANDHELD_LOW
• BMP280_CASE_HANDHELD_DYN (default)
• BMP280_CASE_WEATHER
• BMP280_CASE_FLOOR
• BMP280_CASE_DROP
• BMP280_CASE_INDOOR

Oversampling setting (See 3.3.1, 3.8.2)

• BMP280_OS_ULTRALOW
• BMP280_OS_LOW
• BMP280_OS_STANDARD
• BMP280_OS_HIGH
• BMP280_OS_ULTRAHIGH

Pressure oversampling (See 3.3.1)

• BMP280_PRES_OS_SKIP
• BMP280_PRES_OS_1
• BMP280_PRES_OS_2
• BMP280_PRES_OS_4
• BMP280_PRES_OS_8
• BMP280_PRES_OS_16

Temperature oversampling (See 3.3.2)

• BMP280_TEMP_OS_SKIP
• BMP280_TEMP_OS_1
• BMP280_TEMP_OS_2
• BMP280_TEMP_OS_4
• BMP280_TEMP_OS_8
• BMP280_TEMP_OS_16

IIR filter (See 3.3.3)

• BMP280_IIR_FILTER_OFF
• BMP280_IIR_FILTER_2
• BMP280_IIR_FILTER_4
• BMP280_IIR_FILTER_8
• BMP280_IIR_FILTER_16

Standby settings for Normal measure (See 3.6.3)

• BMP280_STANDBY_0_5
• BMP280_STANDBY_62_5
• BMP280_STANDBY_125
• BMP280_STANDBY_250
• BMP280_STANDBY_500
• BMP280_STANDBY_1000
• BMP280_STANDBY_2000
• BMP280_STANDBY_4000

Power modes

• BMP280_POWER_SLEEP
• BMP280_POWER_FORCED
• BMP280_POWER_NORMAL

SPI 3-wire select

• BMP280_SPI3W_ON
• BMP280_SPI3W_OFF

Example

from machine import I2C
from bmp280 import *

bus = I2C()
bmp = BMP280(bus)

bmp.use_case(BMP280_CASE_WEATHER)
bmp.oversample(BMP280_OS_HIGH)

bmp.temp_os = BMP280_TEMP_OS_8
bmp.press_os = BMP280_PRES_OS_4

bmp.standby = BMP280_STANDBY_250
bmp.iir = BMP280_IIR_FILTER_2

bmp.spi3w = BMP280_SPI3W_ON

bmp.power_mode = BMP280_POWER_FORCED
# or 
bmp.force_measure()

bmp.power_mode = BMP280_POWER_NORMAL
# or 
bmp.normal_measure()
# also
bmp.in_normal_mode()

bmp.power_mode = BMP280_POWER_SLEEP
# or 
bmp.sleep()

print(bmp.temperature)
print(bmp.pressure)

#True while measuring
bmp.is_measuring

#True while copying data to registers
bmp.is_updating

TODO

• SPI support
• Filters
• Oversampling settings (half done)
• Power modes
• Standby setting for Normal mode