clkDiv
A clock divider or basic sequencer with 16 divisions/steps. Move the seq
switch up to enable the sequencer mode. When connected, the in
value will be sent to the outputs instead of the clock clk
. When rst
is high, the internal clock will reset on the next clock high.
bCrush
A bit crusher with bit manipulation. rate
in and knob controls the sample rate (horizontal) of the signal; res
in and knob, control the amplitude resolution (vertical) of the signal. The bit operators are accumulative and affected by the res
input and knob. hold
is a sample and hold clock input that will override the sample rate controls.
Clip
A hard clipping limiter with inner push
and outer limits limit
, and center offsets pos
for each. pull
zeros the inner limit and clip
enables/disables the outer limit.
Build instructions are in the VCV Rack Manual
All source code is copyright © 2019 aridacity and licensed under BSD-3-Clause
All panel and component graphics in res/*
are copyright © 2019 aridacity and licensed under CC BY-NC 4.0.