Documentation Modifications: Docs » Installation » Using Centreon

[chgautier]

---

BUG REPORT INFORMATION

Centreon Web version: 2.8.x

Centreon Engine version:

Centreon Broker version:

Additional environment details (AWS, VirtualBox, physical, etc.):
http://doc-dev.int.centreon.com/docs/centreon/en/2.8.x/installation/from_centreon.html

Describe the results you received:
Step 1 : Start
“To install, start your server on the support (created from the ISO file) of the Centreon. "

Describe the results you expected:

To install Centreon, start the server/virtual machine using the ISO file cited in the downloads section of the installation guide.

Describe the results you received:
“Select the network card that you want to use and go into “IPv4 Settings” or “IPv6 Settings” tab (depending on the requirement) to configure the IP address of the interfaces."

Describe the results you expected:
Select the network card that you want to use and go to the “IPv4 Settings” tab or the “IPv6 Settings” tab (depending on the requirements) to configure the IP addresses of the different interfaces.

Describe the results you received:
Step 4 : Component selection
Choose the server type
“It is possible to choose different options in answer to the question"

Describe the results you expected:
It is possible to choose from different options to answer the question

Describe the results you received:
Configuration
Via the web interface
After step 7:
“At this stage a publicity allows to know the latest Centreon . If your platform is connected to the Internet you have the latest information , if the information present in this version will be offered.”

Describe the results you expected:
At this stage, an ad informs you of the latest Centreon news/products . If your platform is connected to the Internet, you will receive the latest information. If not, the information of the current version will be displayed.

Describe the results you received:
To start monitoring engine :

On web interface, go to Configuration ==> Monitoring engines

Describe the results you expected:
To start the monitoring engine :

On the web interface, go to Configuration ==> Monitoring engines

Describe the results you received:
Easy monitoring configuration

"However you might find useful to use Centreon IMP to get you started in minutes."

"Centreon IMP needs the technical components Centreon License Manager and Centreon Plugin Pack Manager to work."

"When using Centreon ISO, installation of Centreon Plugin Pack Manager is very easy."

"Once the packages installed, you need to enable the module in Centreon. So get to the Administration -> Extensions -> Modules page."

"You’re now ready to got to Administration -> Extensions -> Plugin packs -> Setup. You’ll find there 6 free Plugin Packs to get you started. 5 more are available after free registration and 150+ if you subscribe to the IMP offer (more information on our website)."

Describe the results you expected:

However you might find it useful to use Centreon IMP to get you started in minutes.

Centreon IMP needs the technical components: Centreon License Manager and Centreon Plugin Pack Manager to work.

When using Centreon ISO, the installation of Centreon Plugin Pack Manager is very easy.

Once the packages are installed, you need to enable the module in Centreon. So go to the Administration -> Extensions -> Modules page.

You’re now ready to go to Administration -> Extensions -> Plugin packs -> Setup. You’ll find there 6 free Plugin Packs to get you started. 5 more are available after free registration and 150+ if you subscribe to the IMP offer (more information on our website).

Additional information you think important (e.g. issue happens only occasionally):

[chgautier]

Validated in PR #5844