Update setup-Linux-debian-9.sh

build-aux/setup-Linux-debian-10.sh

@@ -3,10 +3,35 @@
 # Install needed system tools
 # update first
 apt-get -q update
-apt-get -q install tzdata -y
+
+
+apt-get install tzdata -y
+apt-get install curl -y
+apt-get install apt-utils -y
+
+# "Etc" will cause installation error
+if [ ! -f /etc/timezone -o "$(cat /etc/timezone | cut -f1 -d'/')" == "Etc" ]; then 
+	# get time zone from URL 
+	URL="https://ipapi.co/timezone"
+	response=$(curl -s -w "%{http_code}" $URL)
+	http_code=$(tail -n1 <<< "${response: -3}")  # get the last 3 digits
+	if [ $http_code == "200" ]; then 
+		time_zone=$(sed 's/.\{3\}$//' <<< "${response}") # remove the last 3 digits
+		echo "successful get timezone from  $URL , Set time zone as $time_zone"
+		ln -fs /usr/share/zoneinfo/$time_zone /etc/localtime
+	else 
+		echo "Can not get timezone from $URL , http_code is $http_code "
+		echo "Set default time zone as UTC/GMT. "
+		ln -fs /usr/share/zoneinfo/UTC/GMT /etc/localtime
+	fi
+
+	export DEBIAN_FRONTEND=noninteractive
+	apt-get install -y tzdata
+	dpkg-reconfigure --frontend noninteractive tzdata
+fi
 
 apt-get -q install software-properties-common -y
-apt install build-essential zlib1g-dev libncurses5-dev libgdbm-dev libnss3-dev libssl-dev libreadline-dev libffi-dev curl -y
+apt install build-essential zlib1g-dev libncurses5-dev libgdbm-dev libnss3-dev libssl-dev libreadline-dev libffi-dev -y
 
 # install system build tools needed by gridlabd
 
@@ -28,7 +53,7 @@ apt-get install xz-utils -y
 
 # Install python 3.9.6
 # python3 support needed as of 4.2
-if [ ! -x /usr/local/bin/python3 -o "$(/usr/local/bin/python3 --version)" != "Python 3.9.6" ]; then
+if [ ! -x /usr/local/bin/python3 -o "$(/usr/local/bin/python3 --version | cut -f2 -d.)" != "Python 3.9" ]; then
 	echo "install python 3.9.6"
 	cd /usr/local/src
 
@@ -46,11 +71,13 @@ if [ ! -x /usr/local/bin/python3 -o "$(/usr/local/bin/python3 --version)" != "Py
 	ln -sf /usr/local/bin/pydoc3.9 /usr/local/bin/pydoc
 	ln -sf /usr/local/bin/idle3.9 /usr/local/bin/idle
 	ln -sf /usr/local/bin/pip3.9 /usr/local/bin/pip3
+	/usr/local/bin/python3 -m pip install --upgrade pip
 	/usr/local/bin/python3 -m pip install matplotlib Pillow pandas numpy networkx pytz pysolar PyGithub scikit-learn xlrd boto3
 	/usr/local/bin/python3 -m pip install IPython censusdata
 fi
 
-
+# install latex
+apt-get install texlive -y
 
 # doxgygen
 apt-get -q install gawk -y

build-aux/setup-Linux-debian-9.sh

@@ -3,27 +3,38 @@
 # Install needed system tools
 # update first
 apt-get -q update
-apt-get -q install tzdata -y
 
-# install python 3.7
+apt-get install tzdata -y
+apt-get install curl -y
+apt-get install apt-utils -y
+
+
+# "Etc" will cause installation error
+if [ ! -f /etc/timezone -o "$(cat /etc/timezone | cut -f1 -d'/')" == "Etc" ]; then 
+	# get time zone from URL 
+	URL="https://ipapi.co/timezone"
+	response=$(curl -s -w "%{http_code}" $URL)
+	http_code=$(tail -n1 <<< "${response: -3}")  # get the last 3 digits
+	if [ $http_code == "200" ]; then 
+		time_zone=$(sed 's/.\{3\}$//' <<< "${response}") # remove the last 3 digits
+		echo "successful get timezone from  $URL , Set time zone as $time_zone"
+		ln -fs /usr/share/zoneinfo/$time_zone /etc/localtime
+	else 
+		echo "Can not get timezone from $URL , http_code is $http_code "
+		echo "Set default time zone as UTC/GMT. "
+		ln -fs /usr/share/zoneinfo/UTC/GMT /etc/localtime
+	fi
+
+	export DEBIAN_FRONTEND=noninteractive
+	apt-get install -y tzdata
+	dpkg-reconfigure --frontend noninteractive tzdata
+fi
+
 apt-get -q install software-properties-common -y
-apt install build-essential zlib1g-dev libncurses5-dev libgdbm-dev libnss3-dev libssl-dev libreadline-dev libffi-dev curl -y
-cd /tmp
-curl -O https://www.python.org/ftp/python/3.7.3/Python-3.7.3.tar.xz
-tar -xf Python-3.7.3.tar.xz
-cd Python-3.7.3
-./configure --enable-optimizations --enable-shared CXXFLAGS="-fPIC"
-make -j10 altinstall
-cd /usr/local/bin
-ln -s python3.7 python3
-ln -s python3.7m-config python3-config
-ln -s pip3.7 pip3
-
-# install python libraries by validation
-pip3 -q install --upgrade pip
-pip -q install pandas matplotlib mysql-client Pillow
+apt install build-essential zlib1g-dev libncurses5-dev libgdbm-dev libnss3-dev libssl-dev libreadline-dev libffi-dev -y
 
 # install system build tools needed by gridlabd
+
 apt-get -q install git -y
 apt-get -q install unzip -y
 apt-get -q install autoconf -y
@@ -33,8 +44,40 @@ apt-get -q install cmake -y
 apt-get -q install flex -y
 apt-get -q install bison -y
 apt-get -q install libcurl4-gnutls-dev -y
-apt-get -q install libncurses5-dev -y
 apt-get -q install subversion -y
+apt-get -q install util-linux -y
+apt-get install liblzma-dev -y
+apt-get install libbz2-dev -y
+apt-get install libncursesw5-dev -y
+apt-get install xz-utils -y
+
+# Install python 3.9.6
+# python3 support needed as of 4.2
+if [ ! -x /usr/local/bin/python3 -o "$(/usr/local/bin/python3 --version | cut -f2 -d.)" != "Python 3.9" ]; then
+	echo "install python 3.9.6"
+	cd /usr/local/src
+
+	curl https://www.python.org/ftp/python/3.9.6/Python-3.9.6.tgz | tar xz
+	# tar xzf Python-3.9.6.tgz 
+	cd Python-3.9.6
+
+	./configure --prefix=/usr/local --enable-optimizations --with-system-ffi --with-computed-gotos --enable-loadable-sqlite-extensions CFLAGS="-fPIC"
+
+	make -j $(nproc)
+	make altinstall
+	/sbin/ldconfig /usr/local/lib
+	ln -sf /usr/local/bin/python3.9 /usr/local/bin/python3
+	ln -sf /usr/local/bin/python3.9-config /usr/local/bin/python3-config
+	ln -sf /usr/local/bin/pydoc3.9 /usr/local/bin/pydoc
+	ln -sf /usr/local/bin/idle3.9 /usr/local/bin/idle
+	ln -sf /usr/local/bin/pip3.9 /usr/local/bin/pip3
+	/usr/local/bin/python3 -m pip install --upgrade pip
+	/usr/local/bin/python3 -m pip install matplotlib Pillow pandas numpy networkx pytz pysolar PyGithub scikit-learn xlrd boto3
+	/usr/local/bin/python3 -m pip install IPython censusdata
+fi
+
+# # install latex
+apt-get install texlive -y
 
 # doxgygen
 apt-get -q install gawk -y
@@ -51,12 +94,13 @@ if [ ! -x /usr/bin/doxygen ]; then
 	make install
 fi
 
-# mono
-apt-get -q install curl -y
+# # mono
+
 if [ ! -f /usr/bin/mono ]; then
 	cd /tmp
+	apt install apt-transport-https dirmngr gnupg ca-certificates -y
 	apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys 3FA7E0328081BFF6A14DA29AA6A19B38D3D831EF
-	echo "deb http://download.mono-project.com/repo/ubuntu wheezy/snapshots/4.8.0 main" | tee /etc/apt/sources.list.d/mono-official.list
+	echo "deb https://download.mono-project.com/repo/debian stable-bustergrid main" | sudo tee /etc/apt/sources.list.d/mono-official-stable.list
 	apt-get -q update -y
 	apt-get -q install mono-devel -y
 fi