Sync #6
Merged
Sync #6
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
AD8015 transimpedance amplifier, in SOIC-8
* add IR26-21C_L110_TR8 * modify after review
* add LT3042 voltage regulator, MSOP-10 * fix klc errors * changes as suggester by review
* add LT3045 voltage regulator, MSOP-12 * remove lt3042 - was not supposed to be here.. * changes as suggested in #1812 * EN/UV pin to type input.
Add TAS5825M
added symbol for BMM150 geomagnetic sensor
ADP71x2 series
added symbol for BMI160: Small, low power inertial measurement unit
* Added RCLAMP3328P * Improved symbol description * Added alias for WE-TVS-824014881 https://www.digikey.com/product-detail/en/wurth-electronics-inc/824014881/732-11795-1-ND/8259203 * Added alias for ESDLC5V0PB8 https://www.digikey.com/product-detail/en/micro-commercial-co/ESDLC5V0PB8-TP/ESDLC5V0PB8-TPMSCT-ND/6004820 * Added alias for SP7538P * Added alias for DT1240A-08LP3810 * Remove word 'package' * Changed pin numbering * Fixed missing package info
* TC4421/2 added * Fixed test errors * Fixed test errors * some corrections * more corrections * Pin are stacked now and nameing according to convention * Fixed stack pin types, fixed pin name offset and shrinked symbol size
* Add Texas Instruments CDCLVP1102 * Switched output pins 11 with 9 and 12 with 10 to count from top to bottom * Remove new library * Move part to existing Interface library * Implement requested changes * Change name to CDCLVP1102RGT * Add ", VQFN-16" to end of description * Reduce height by moving NC pins * Move NC pins to border outline
* add KSW-2-46 and KSWA-2-46 RF switches * add KSWHA-1-20+ RF switch * add 50 Ohm to switch description * add KSW-2-46 and KSWA-2-46 RF switches * add KSWHA-1-20+ RF switch * add 50 Ohm to switch description * KSWA-2-26 / KSWHA-1-20: drop SOP fpfilter * MC KSW switches: preselect a footprint * fix footprint selections * fix missing ENDCMP from failed merge * ksw: remove preselected footprint
* added TLV9004IRUCR * applied changes
* add CD4097B * footprint filters must end in `*` * Don't use number of pins to filter footprints * fix center and pin locations * center VDD pin * center control line
* Add MAX14778 multiplexer * Fix footprint filter, pin types, … * Fix pin position * Change footprint to TQFN * Change pin layout * Rearrange pins
* Change footprint for the APA102 5050 - change footprint from LED_SMD:LED_RGB_PLCC-6 to LED_SMD:LED_RGB_5050-6 - see #1910 for discussion. * fix filter.
* Fix 4068 IEEE symbol * add non-inverted output * fix pin types * Add datasheet link, keywords
* added diodes inc ZXBM5210 Reversible DC Motor Driver SO-8 * fixed travis errors component outline to 10mil footprint filter asterisk added * filled symbol with background color * Fixed reviewers comments and added symbol for thermal pad variant - Added ", SOIC-8" to the end of the description - Changed pin text offset to 20mil and shrinked the symbol accordingly - Removed "?8" from the footprint filter - Added "-S" to the symbol name to indicate there is no thermal pad - Added another symbol with an -SP suffix with pin 9 stacked on pin 8 for the thermal pad * adjusted footprintfilter for -SP variant * set pad to passive was violating S4.3 (see special case) * reduced pin length to 100mil changed -S variant to SOIC rearranged the pins to clear the text * moved vm back to top and rearranged pins for compact size
* Microchip PIC ICSP connector * PIC ICSP connector update * PIC ICSP connector update #2 * ICSP update * PIC ICSP rename to Conn_PIC_ICSP_ICD
* STM32F042F*: renamed pin 15 from VSSA to VSS (datasheet https://www.st.com/resource/en/datasheet/stm32f042f6.pdf) and fixed Violating S3.1. * Go back to the orgin verion to make the fix in two step * Just saving MCU_ST_STM32F0.lib with KiCad 5.1.2 to get the files updated. * STM32F042F*: renamed pin 15 from VSSA to VSS (datasheet https://www.st.com/resource/en/datasheet/stm32f042f6.pdf) and fixed Violating S3.1. * STM32F042F*: revert fixing Violating S3.1 (changed back symbol size and location of VDD and VDDA pin)
* Sensor_Humidity: HDC1080: disconnect DAP (EP) From the device datasheet (https://www.ti.com/lit/ds/symlink/hdc1080.pdf): "DAP - Die Attach Pad. Should be left floating." "The DAP may be soldered to a floating pad on the board, but the board pad should NOT be connected to GND." * Sensor_Humidity: HDC1080: rename DNC pins as NC To match the datasheet.
* change pins of RF splitters to passive a splitter has no clear direction as they can either be used as power splitter or as power combiner. Previously input and output ports were assigned forcing the usage as splitter. As the devices have no active components all pins (including GND) have been changed to passive. * move NC pins of RF splitter onto 100mil grid
* Add AD831 * Update RF_Mixer.dcm * Update RF_Mixer.lib * Update RF_Mixer.dcm * Update RF_Mixer.dcm * Update RF_Mixer.dcm * Update RF_Mixer.lib * Update RF_Mixer.lib * Update RF_Mixer.dcm * Update RF_Mixer.lib * Update RF_Mixer.lib * Update RF_Mixer.lib * Update RF_Mixer.lib * Update RF_Mixer.dcm * Update RF_Mixer.lib
* Added INA3221 * Moved package field a bit higher * Included footprint name in description of INA3221 * Swapped the positions of pins 11 and 12 * Fixed pin electrical type, added pin 17 EP * Moved pin locations and changed electrical type * Changed footprint to Texas_RGV_S-PVQFN-N16_EP2.1x2.1mm * removed duplicate MAX8586
* Add Analog Devices LTC2942 and LTC2942-1 * Adjust LTC2942 pin placement * Update LTC2942 metadata * Fix LTC2942 footprint filter
* Add Vishay Siliconix SiP32431 and SiP32432 * Fix SiP3243x pin name offset * Revise SiP3243x symbols
Add missing ground pad on ESP32-WROOM-32 modules, found in footprint but not on symbol
* Added PCA9600D & PCA9600DP. * Post-review modifications.
Add MAX7219 8-Digit LED Display Driver
* Change DS link to http://www.ti.com/lit/ds/symlink/lm4810.pdf
* Added symbol for STM8S001J3. * Updated symbol based on review comments. * Travis failure: Fix pins to 100mil grid. * Travis warning: Fix pin labels to 20mil. * Added PCA9600D & PCA9600DP. * Revert "Added PCA9600D & PCA9600DP.", wrong branch. This reverts commit c14c95d.
Adds PIC18F27J53_ISS
* ESP32-PICO-D4 added * Checklib warnings fixed * Review comments integrated * Review comments integrated * Description for ESP32-WROOM-32U restored * Description for ESP32-WROOM-32U restored * Review comments integrated * 0 removed from PIN SD2/IO9
LDO Positive voltage regulator (fixed), SOT-23. - Part available in 0.1V increments (first set of 'xxx' wildcards) - It is an LDO, but Torex doesn't call it exactly that. - Tons of second-source mfg with different prefix than XC
* added uext connector * created UEXT * connector is now host side configuration * made Host/Slave * aligned pins, made description * fucking grid * weired dcm file * sync 2 symbols * fixed deleted ICSP * swapped clock pins and ~SSEL * included suggestions
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Replace this line with your commit message! Please provide a description of your pull request
All contributions to the kicad library must follow the KiCad library convention
Thanks for creating a pull request to contribute to the KiCad libraries! To speed up integration of your PR, please check the following items: