net: include xdp generic metadata definition #5

mswiatko · 2021-08-10T08:05:33Z

Definition is only a proposal. There should be free place for 8B of tx
timestamp.

Signed-off-by: Michal Swiatkowski michal.swiatkowski@intel.com

Definition is only a proposal. There should be free place for 8B of tx timestamp. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>

…itch FPU_STATUS register contains FP exception flags bits which are updated by core as side-effect of FP instructions but can also be manually wiggled such as by glibc C99 functions fe{raise,clear,test}except() etc. To effect the update, the programming model requires OR'ing FWE bit (31). This bit is write-only and RAZ, meaning it is effectively auto-cleared after write and thus needs to be set everytime: which is how glibc implements this. However there's another usecase of FPU_STATUS update, at the time of Linux task switch when incoming task value needs to be programmed into the register. This was added as part of f45ba2b ("ARCv2: fpu: preserve userspace fpu state") which missed OR'ing FWE bit, meaning the new value is effectively not being written at all. This patch remedies that. Interestingly, this snafu was not caught in interm glibc testing as the race window which relies on a specific exception bit to be set/clear is really small specially when it nvolves context switch. Fortunately this was caught by glibc's math/test-fenv-tls test which repeatedly set/clear exception flags in a big loop, concurrently in main program and also in a thread. Fixes: foss-for-synopsys-dwc-arc-processors#54 Fixes: f45ba2b ("ARCv2: fpu: preserve userspace fpu state") Cc: stable@vger.kernel.org #5.6+ Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

Ammar reports that he's seeing a lockdep splat on running test/rsrc_tags from the regression suite: ====================================================== WARNING: possible circular locking dependency detected 5.14.0-rc3-bluetea-test-00249-gc7d102232649 #5 Tainted: G OE ------------------------------------------------------ kworker/2:4/2684 is trying to acquire lock: ffff88814bb1c0a8 (&ctx->uring_lock){+.+.}-{3:3}, at: io_rsrc_put_work+0x13d/0x1a0 but task is already holding lock: ffffc90001c6be70 ((work_completion)(&(&ctx->rsrc_put_work)->work)){+.+.}-{0:0}, at: process_one_work+0x1bc/0x530 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 ((work_completion)(&(&ctx->rsrc_put_work)->work)){+.+.}-{0:0}: __flush_work+0x31b/0x490 io_rsrc_ref_quiesce.part.0.constprop.0+0x35/0xb0 __do_sys_io_uring_register+0x45b/0x1060 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #0 (&ctx->uring_lock){+.+.}-{3:3}: __lock_acquire+0x119a/0x1e10 lock_acquire+0xc8/0x2f0 __mutex_lock+0x86/0x740 io_rsrc_put_work+0x13d/0x1a0 process_one_work+0x236/0x530 worker_thread+0x52/0x3b0 kthread+0x135/0x160 ret_from_fork+0x1f/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((work_completion)(&(&ctx->rsrc_put_work)->work)); lock(&ctx->uring_lock); lock((work_completion)(&(&ctx->rsrc_put_work)->work)); lock(&ctx->uring_lock); *** DEADLOCK *** 2 locks held by kworker/2:4/2684: #0: ffff88810004d938 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1bc/0x530 #1: ffffc90001c6be70 ((work_completion)(&(&ctx->rsrc_put_work)->work)){+.+.}-{0:0}, at: process_one_work+0x1bc/0x530 stack backtrace: CPU: 2 PID: 2684 Comm: kworker/2:4 Tainted: G OE 5.14.0-rc3-bluetea-test-00249-gc7d102232649 #5 Hardware name: Acer Aspire ES1-421/OLVIA_BE, BIOS V1.05 07/02/2015 Workqueue: events io_rsrc_put_work Call Trace: dump_stack_lvl+0x6a/0x9a check_noncircular+0xfe/0x110 __lock_acquire+0x119a/0x1e10 lock_acquire+0xc8/0x2f0 ? io_rsrc_put_work+0x13d/0x1a0 __mutex_lock+0x86/0x740 ? io_rsrc_put_work+0x13d/0x1a0 ? io_rsrc_put_work+0x13d/0x1a0 ? io_rsrc_put_work+0x13d/0x1a0 ? process_one_work+0x1ce/0x530 io_rsrc_put_work+0x13d/0x1a0 process_one_work+0x236/0x530 worker_thread+0x52/0x3b0 ? process_one_work+0x530/0x530 kthread+0x135/0x160 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x1f/0x30 which is due to holding the ctx->uring_lock when flushing existing pending work, while the pending work flushing may need to grab the uring lock if we're using IOPOLL. Fix this by dropping the uring_lock a bit earlier as part of the flush. Cc: stable@vger.kernel.org Link: axboe/liburing#404 Tested-by: Ammar Faizi <ammarfaizi2@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

Following test case reproduces lockdep warning. Test case: $ mkfs.btrfs -f <dev1> $ btrfstune -S 1 <dev1> $ mount <dev1> <mnt> $ btrfs device add <dev2> <mnt> -f $ umount <mnt> $ mount <dev2> <mnt> $ umount <mnt> The warning claims a possible ABBA deadlock between the threads initiated by [#1] btrfs device add and [#0] the mount. [ 540.743122] WARNING: possible circular locking dependency detected [ 540.743129] 5.11.0-rc7+ #5 Not tainted [ 540.743135] ------------------------------------------------------ [ 540.743142] mount/2515 is trying to acquire lock: [ 540.743149] ffffa0c5544c2ce0 (&fs_devs->device_list_mutex){+.+.}-{4:4}, at: clone_fs_devices+0x6d/0x210 [btrfs] [ 540.743458] but task is already holding lock: [ 540.743461] ffffa0c54a7932b8 (btrfs-chunk-00){++++}-{4:4}, at: __btrfs_tree_read_lock+0x32/0x200 [btrfs] [ 540.743541] which lock already depends on the new lock. [ 540.743543] the existing dependency chain (in reverse order) is: [ 540.743546] -> #1 (btrfs-chunk-00){++++}-{4:4}: [ 540.743566] down_read_nested+0x48/0x2b0 [ 540.743585] __btrfs_tree_read_lock+0x32/0x200 [btrfs] [ 540.743650] btrfs_read_lock_root_node+0x70/0x200 [btrfs] [ 540.743733] btrfs_search_slot+0x6c6/0xe00 [btrfs] [ 540.743785] btrfs_update_device+0x83/0x260 [btrfs] [ 540.743849] btrfs_finish_chunk_alloc+0x13f/0x660 [btrfs] <--- device_list_mutex [ 540.743911] btrfs_create_pending_block_groups+0x18d/0x3f0 [btrfs] [ 540.743982] btrfs_commit_transaction+0x86/0x1260 [btrfs] [ 540.744037] btrfs_init_new_device+0x1600/0x1dd0 [btrfs] [ 540.744101] btrfs_ioctl+0x1c77/0x24c0 [btrfs] [ 540.744166] __x64_sys_ioctl+0xe4/0x140 [ 540.744170] do_syscall_64+0x4b/0x80 [ 540.744174] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 540.744180] -> #0 (&fs_devs->device_list_mutex){+.+.}-{4:4}: [ 540.744184] __lock_acquire+0x155f/0x2360 [ 540.744188] lock_acquire+0x10b/0x5c0 [ 540.744190] __mutex_lock+0xb1/0xf80 [ 540.744193] mutex_lock_nested+0x27/0x30 [ 540.744196] clone_fs_devices+0x6d/0x210 [btrfs] [ 540.744270] btrfs_read_chunk_tree+0x3c7/0xbb0 [btrfs] [ 540.744336] open_ctree+0xf6e/0x2074 [btrfs] [ 540.744406] btrfs_mount_root.cold.72+0x16/0x127 [btrfs] [ 540.744472] legacy_get_tree+0x38/0x90 [ 540.744475] vfs_get_tree+0x30/0x140 [ 540.744478] fc_mount+0x16/0x60 [ 540.744482] vfs_kern_mount+0x91/0x100 [ 540.744484] btrfs_mount+0x1e6/0x670 [btrfs] [ 540.744536] legacy_get_tree+0x38/0x90 [ 540.744537] vfs_get_tree+0x30/0x140 [ 540.744539] path_mount+0x8d8/0x1070 [ 540.744541] do_mount+0x8d/0xc0 [ 540.744543] __x64_sys_mount+0x125/0x160 [ 540.744545] do_syscall_64+0x4b/0x80 [ 540.744547] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 540.744551] other info that might help us debug this: [ 540.744552] Possible unsafe locking scenario: [ 540.744553] CPU0 CPU1 [ 540.744554] ---- ---- [ 540.744555] lock(btrfs-chunk-00); [ 540.744557] lock(&fs_devs->device_list_mutex); [ 540.744560] lock(btrfs-chunk-00); [ 540.744562] lock(&fs_devs->device_list_mutex); [ 540.744564] *** DEADLOCK *** [ 540.744565] 3 locks held by mount/2515: [ 540.744567] #0: ffffa0c56bf7a0e0 (&type->s_umount_key#42/1){+.+.}-{4:4}, at: alloc_super.isra.16+0xdf/0x450 [ 540.744574] #1: ffffffffc05a9628 (uuid_mutex){+.+.}-{4:4}, at: btrfs_read_chunk_tree+0x63/0xbb0 [btrfs] [ 540.744640] #2: ffffa0c54a7932b8 (btrfs-chunk-00){++++}-{4:4}, at: __btrfs_tree_read_lock+0x32/0x200 [btrfs] [ 540.744708] stack backtrace: [ 540.744712] CPU: 2 PID: 2515 Comm: mount Not tainted 5.11.0-rc7+ #5 But the device_list_mutex in clone_fs_devices() is redundant, as explained below. Two threads [1] and [2] (below) could lead to clone_fs_device(). [1] open_ctree <== mount sprout fs btrfs_read_chunk_tree() mutex_lock(&uuid_mutex) <== global lock read_one_dev() open_seed_devices() clone_fs_devices() <== seed fs_devices mutex_lock(&orig->device_list_mutex) <== seed fs_devices [2] btrfs_init_new_device() <== sprouting mutex_lock(&uuid_mutex); <== global lock btrfs_prepare_sprout() lockdep_assert_held(&uuid_mutex) clone_fs_devices(seed_fs_device) <== seed fs_devices Both of these threads hold uuid_mutex which is sufficient to protect getting the seed device(s) freed while we are trying to clone it for sprouting [2] or mounting a sprout [1] (as above). A mounted seed device can not free/write/replace because it is read-only. An unmounted seed device can be freed by btrfs_free_stale_devices(), but it needs uuid_mutex. So this patch removes the unnecessary device_list_mutex in clone_fs_devices(). And adds a lockdep_assert_held(&uuid_mutex) in clone_fs_devices(). Reported-by: Su Yue <l@damenly.su> Tested-by: Su Yue <l@damenly.su> Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>

If CONFIG_BLK_DEV_LOOP && CONFIG_MTD (at least; there might be other combinations), lockdep complains circular locking dependency at __loop_clr_fd(), for major_names_lock serves as a locking dependency aggregating hub across multiple block modules. ====================================================== WARNING: possible circular locking dependency detected 5.14.0+ torvalds#757 Tainted: G E ------------------------------------------------------ systemd-udevd/7568 is trying to acquire lock: ffff88800f334d48 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x70/0x560 but task is already holding lock: ffff888014a7d4a0 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x4d/0x400 [loop] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #6 (&lo->lo_mutex){+.+.}-{3:3}: lock_acquire+0xbe/0x1f0 __mutex_lock_common+0xb6/0xe10 mutex_lock_killable_nested+0x17/0x20 lo_open+0x23/0x50 [loop] blkdev_get_by_dev+0x199/0x540 blkdev_open+0x58/0x90 do_dentry_open+0x144/0x3a0 path_openat+0xa57/0xda0 do_filp_open+0x9f/0x140 do_sys_openat2+0x71/0x150 __x64_sys_openat+0x78/0xa0 do_syscall_64+0x3d/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #5 (&disk->open_mutex){+.+.}-{3:3}: lock_acquire+0xbe/0x1f0 __mutex_lock_common+0xb6/0xe10 mutex_lock_nested+0x17/0x20 bd_register_pending_holders+0x20/0x100 device_add_disk+0x1ae/0x390 loop_add+0x29c/0x2d0 [loop] blk_request_module+0x5a/0xb0 blkdev_get_no_open+0x27/0xa0 blkdev_get_by_dev+0x5f/0x540 blkdev_open+0x58/0x90 do_dentry_open+0x144/0x3a0 path_openat+0xa57/0xda0 do_filp_open+0x9f/0x140 do_sys_openat2+0x71/0x150 __x64_sys_openat+0x78/0xa0 do_syscall_64+0x3d/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #4 (major_names_lock){+.+.}-{3:3}: lock_acquire+0xbe/0x1f0 __mutex_lock_common+0xb6/0xe10 mutex_lock_nested+0x17/0x20 blkdev_show+0x19/0x80 devinfo_show+0x52/0x60 seq_read_iter+0x2d5/0x3e0 proc_reg_read_iter+0x41/0x80 vfs_read+0x2ac/0x330 ksys_read+0x6b/0xd0 do_syscall_64+0x3d/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #3 (&p->lock){+.+.}-{3:3}: lock_acquire+0xbe/0x1f0 __mutex_lock_common+0xb6/0xe10 mutex_lock_nested+0x17/0x20 seq_read_iter+0x37/0x3e0 generic_file_splice_read+0xf3/0x170 splice_direct_to_actor+0x14e/0x350 do_splice_direct+0x84/0xd0 do_sendfile+0x263/0x430 __se_sys_sendfile64+0x96/0xc0 do_syscall_64+0x3d/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #2 (sb_writers#3){.+.+}-{0:0}: lock_acquire+0xbe/0x1f0 lo_write_bvec+0x96/0x280 [loop] loop_process_work+0xa68/0xc10 [loop] process_one_work+0x293/0x480 worker_thread+0x23d/0x4b0 kthread+0x163/0x180 ret_from_fork+0x1f/0x30 -> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}: lock_acquire+0xbe/0x1f0 process_one_work+0x280/0x480 worker_thread+0x23d/0x4b0 kthread+0x163/0x180 ret_from_fork+0x1f/0x30 -> #0 ((wq_completion)loop0){+.+.}-{0:0}: validate_chain+0x1f0d/0x33e0 __lock_acquire+0x92d/0x1030 lock_acquire+0xbe/0x1f0 flush_workqueue+0x8c/0x560 drain_workqueue+0x80/0x140 destroy_workqueue+0x47/0x4f0 __loop_clr_fd+0xb4/0x400 [loop] blkdev_put+0x14a/0x1d0 blkdev_close+0x1c/0x20 __fput+0xfd/0x220 task_work_run+0x69/0xc0 exit_to_user_mode_prepare+0x1ce/0x1f0 syscall_exit_to_user_mode+0x26/0x60 do_syscall_64+0x4c/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: (wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&lo->lo_mutex); lock(&disk->open_mutex); lock(&lo->lo_mutex); lock((wq_completion)loop0); *** DEADLOCK *** 2 locks held by systemd-udevd/7568: #0: ffff888012554128 (&disk->open_mutex){+.+.}-{3:3}, at: blkdev_put+0x4c/0x1d0 #1: ffff888014a7d4a0 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x4d/0x400 [loop] stack backtrace: CPU: 0 PID: 7568 Comm: systemd-udevd Tainted: G E 5.14.0+ torvalds#757 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 02/27/2020 Call Trace: dump_stack_lvl+0x79/0xbf print_circular_bug+0x5d6/0x5e0 ? stack_trace_save+0x42/0x60 ? save_trace+0x3d/0x2d0 check_noncircular+0x10b/0x120 validate_chain+0x1f0d/0x33e0 ? __lock_acquire+0x953/0x1030 ? __lock_acquire+0x953/0x1030 __lock_acquire+0x92d/0x1030 ? flush_workqueue+0x70/0x560 lock_acquire+0xbe/0x1f0 ? flush_workqueue+0x70/0x560 flush_workqueue+0x8c/0x560 ? flush_workqueue+0x70/0x560 ? sched_clock_cpu+0xe/0x1a0 ? drain_workqueue+0x41/0x140 drain_workqueue+0x80/0x140 destroy_workqueue+0x47/0x4f0 ? blk_mq_freeze_queue_wait+0xac/0xd0 __loop_clr_fd+0xb4/0x400 [loop] ? __mutex_unlock_slowpath+0x35/0x230 blkdev_put+0x14a/0x1d0 blkdev_close+0x1c/0x20 __fput+0xfd/0x220 task_work_run+0x69/0xc0 exit_to_user_mode_prepare+0x1ce/0x1f0 syscall_exit_to_user_mode+0x26/0x60 do_syscall_64+0x4c/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f0fd4c661f7 Code: 00 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 13 fc ff ff RSP: 002b:00007ffd1c9e9fd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 00007f0fd46be6c8 RCX: 00007f0fd4c661f7 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000006 RBP: 0000000000000006 R08: 000055fff1eaf400 R09: 0000000000000000 R10: 00007f0fd46be6c8 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000002f08 R15: 00007ffd1c9ea050 Commit 1c500ad ("loop: reduce the loop_ctl_mutex scope") is for breaking "loop_ctl_mutex => &lo->lo_mutex" dependency chain. But enabling a different block module results in forming circular locking dependency due to shared major_names_lock mutex. The simplest fix is to call probe function without holding major_names_lock [1], but Christoph Hellwig does not like such idea. Therefore, instead of holding major_names_lock in blkdev_show(), introduce a different lock for blkdev_show() in order to break "sb_writers#$N => &p->lock => major_names_lock" dependency chain. Link: https://lkml.kernel.org/r/b2af8a5b-3c1b-204e-7f56-bea0b15848d6@i-love.sakura.ne.jp [1] Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Link: https://lore.kernel.org/r/18a02da2-0bf3-550e-b071-2b4ab13c49f0@i-love.sakura.ne.jp Signed-off-by: Jens Axboe <axboe@kernel.dk>

As previously noted in commit 66e4f4a ("rtc: cmos: Use spin_lock_irqsave() in cmos_interrupt()"): <4>[ 254.192378] WARNING: inconsistent lock state <4>[ 254.192384] 5.12.0-rc1-CI-CI_DRM_9834+ #1 Not tainted <4>[ 254.192396] -------------------------------- <4>[ 254.192400] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. <4>[ 254.192409] rtcwake/5309 [HC0[0]:SC0[0]:HE1:SE1] takes: <4>[ 254.192429] ffffffff8263c5f8 (rtc_lock){?...}-{2:2}, at: cmos_interrupt+0x18/0x100 <4>[ 254.192481] {IN-HARDIRQ-W} state was registered at: <4>[ 254.192488] lock_acquire+0xd1/0x3d0 <4>[ 254.192504] _raw_spin_lock+0x2a/0x40 <4>[ 254.192519] cmos_interrupt+0x18/0x100 <4>[ 254.192536] rtc_handler+0x1f/0xc0 <4>[ 254.192553] acpi_ev_fixed_event_detect+0x109/0x13c <4>[ 254.192574] acpi_ev_sci_xrupt_handler+0xb/0x28 <4>[ 254.192596] acpi_irq+0x13/0x30 <4>[ 254.192620] __handle_irq_event_percpu+0x43/0x2c0 <4>[ 254.192641] handle_irq_event_percpu+0x2b/0x70 <4>[ 254.192661] handle_irq_event+0x2f/0x50 <4>[ 254.192680] handle_fasteoi_irq+0x9e/0x150 <4>[ 254.192693] __common_interrupt+0x76/0x140 <4>[ 254.192715] common_interrupt+0x96/0xc0 <4>[ 254.192732] asm_common_interrupt+0x1e/0x40 <4>[ 254.192750] _raw_spin_unlock_irqrestore+0x38/0x60 <4>[ 254.192767] resume_irqs+0xba/0xf0 <4>[ 254.192786] dpm_resume_noirq+0x245/0x3d0 <4>[ 254.192811] suspend_devices_and_enter+0x230/0xaa0 <4>[ 254.192835] pm_suspend.cold.8+0x301/0x34a <4>[ 254.192859] state_store+0x7b/0xe0 <4>[ 254.192879] kernfs_fop_write_iter+0x11d/0x1c0 <4>[ 254.192899] new_sync_write+0x11d/0x1b0 <4>[ 254.192916] vfs_write+0x265/0x390 <4>[ 254.192933] ksys_write+0x5a/0xd0 <4>[ 254.192949] do_syscall_64+0x33/0x80 <4>[ 254.192965] entry_SYSCALL_64_after_hwframe+0x44/0xae <4>[ 254.192986] irq event stamp: 43775 <4>[ 254.192994] hardirqs last enabled at (43775): [<ffffffff81c00c42>] asm_sysvec_apic_timer_interrupt+0x12/0x20 <4>[ 254.193023] hardirqs last disabled at (43774): [<ffffffff81aa691a>] sysvec_apic_timer_interrupt+0xa/0xb0 <4>[ 254.193049] softirqs last enabled at (42548): [<ffffffff81e00342>] __do_softirq+0x342/0x48e <4>[ 254.193074] softirqs last disabled at (42543): [<ffffffff810b45fd>] irq_exit_rcu+0xad/0xd0 <4>[ 254.193101] other info that might help us debug this: <4>[ 254.193107] Possible unsafe locking scenario: <4>[ 254.193112] CPU0 <4>[ 254.193117] ---- <4>[ 254.193121] lock(rtc_lock); <4>[ 254.193137] <Interrupt> <4>[ 254.193142] lock(rtc_lock); <4>[ 254.193156] *** DEADLOCK *** <4>[ 254.193161] 6 locks held by rtcwake/5309: <4>[ 254.193174] #0: ffff888104861430 (sb_writers#5){.+.+}-{0:0}, at: ksys_write+0x5a/0xd0 <4>[ 254.193232] #1: ffff88810f823288 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0xe7/0x1c0 <4>[ 254.193282] #2: ffff888100cef3c0 (kn->active#285 <7>[ 254.192706] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <4>[ 254.193307] ){.+.+}-{0:0}, at: kernfs_fop_write_iter+0xf0/0x1c0 <4>[ 254.193333] #3: ffffffff82649fa8 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend.cold.8+0xce/0x34a <4>[ 254.193387] #4: ffffffff827a2108 (acpi_scan_lock){+.+.}-{3:3}, at: acpi_suspend_begin+0x47/0x70 <4>[ 254.193433] #5: ffff8881019ea178 (&dev->mutex){....}-{3:3}, at: device_resume+0x68/0x1e0 <4>[ 254.193485] stack backtrace: <4>[ 254.193492] CPU: 1 PID: 5309 Comm: rtcwake Not tainted 5.12.0-rc1-CI-CI_DRM_9834+ #1 <4>[ 254.193514] Hardware name: Google Soraka/Soraka, BIOS MrChromebox-4.10 08/25/2019 <4>[ 254.193524] Call Trace: <4>[ 254.193536] dump_stack+0x7f/0xad <4>[ 254.193567] mark_lock.part.47+0x8ca/0xce0 <4>[ 254.193604] __lock_acquire+0x39b/0x2590 <4>[ 254.193626] ? asm_sysvec_apic_timer_interrupt+0x12/0x20 <4>[ 254.193660] lock_acquire+0xd1/0x3d0 <4>[ 254.193677] ? cmos_interrupt+0x18/0x100 <4>[ 254.193716] _raw_spin_lock+0x2a/0x40 <4>[ 254.193735] ? cmos_interrupt+0x18/0x100 <4>[ 254.193758] cmos_interrupt+0x18/0x100 <4>[ 254.193785] cmos_resume+0x2ac/0x2d0 <4>[ 254.193813] ? acpi_pm_set_device_wakeup+0x1f/0x110 <4>[ 254.193842] ? pnp_bus_suspend+0x10/0x10 <4>[ 254.193864] pnp_bus_resume+0x5e/0x90 <4>[ 254.193885] dpm_run_callback+0x5f/0x240 <4>[ 254.193914] device_resume+0xb2/0x1e0 <4>[ 254.193942] ? pm_dev_err+0x25/0x25 <4>[ 254.193974] dpm_resume+0xea/0x3f0 <4>[ 254.194005] dpm_resume_end+0x8/0x10 <4>[ 254.194030] suspend_devices_and_enter+0x29b/0xaa0 <4>[ 254.194066] pm_suspend.cold.8+0x301/0x34a <4>[ 254.194094] state_store+0x7b/0xe0 <4>[ 254.194124] kernfs_fop_write_iter+0x11d/0x1c0 <4>[ 254.194151] new_sync_write+0x11d/0x1b0 <4>[ 254.194183] vfs_write+0x265/0x390 <4>[ 254.194207] ksys_write+0x5a/0xd0 <4>[ 254.194232] do_syscall_64+0x33/0x80 <4>[ 254.194251] entry_SYSCALL_64_after_hwframe+0x44/0xae <4>[ 254.194274] RIP: 0033:0x7f07d79691e7 <4>[ 254.194293] Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 <4>[ 254.194312] RSP: 002b:00007ffd9cc2c768 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 <4>[ 254.194337] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007f07d79691e7 <4>[ 254.194352] RDX: 0000000000000004 RSI: 0000556ebfc63590 RDI: 000000000000000b <4>[ 254.194366] RBP: 0000556ebfc63590 R08: 0000000000000000 R09: 0000000000000004 <4>[ 254.194379] R10: 0000556ebf0ec2a6 R11: 0000000000000246 R12: 0000000000000004 which breaks S3-resume on fi-kbl-soraka presumably as that's slow enough to trigger the alarm during the suspend. Fixes: 6950d04 ("rtc: cmos: Replace spin_lock_irqsave with spin_lock in hard IRQ") References: 66e4f4a ("rtc: cmos: Use spin_lock_irqsave() in cmos_interrupt()"): Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Xiaofei Tan <tanxiaofei@huawei.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210305122140.28774-1-chris@chris-wilson.co.uk

It's later supposed to be either a correct address or NULL. Without the initialization, it may contain an undefined value which results in the following segmentation fault: # perf top --sort comm -g --ignore-callees=do_idle terminates with: #0 0x00007ffff56b7685 in __strlen_avx2 () from /lib64/libc.so.6 #1 0x00007ffff55e3802 in strdup () from /lib64/libc.so.6 #2 0x00005555558cb139 in hist_entry__init (callchain_size=<optimized out>, sample_self=true, template=0x7fffde7fb110, he=0x7fffd801c250) at util/hist.c:489 #3 hist_entry__new (template=template@entry=0x7fffde7fb110, sample_self=sample_self@entry=true) at util/hist.c:564 #4 0x00005555558cb4ba in hists__findnew_entry (hists=hists@entry=0x5555561d9e38, entry=entry@entry=0x7fffde7fb110, al=al@entry=0x7fffde7fb420, sample_self=sample_self@entry=true) at util/hist.c:657 #5 0x00005555558cba1b in __hists__add_entry (hists=hists@entry=0x5555561d9e38, al=0x7fffde7fb420, sym_parent=<optimized out>, bi=bi@entry=0x0, mi=mi@entry=0x0, sample=sample@entry=0x7fffde7fb4b0, sample_self=true, ops=0x0, block_info=0x0) at util/hist.c:288 #6 0x00005555558cbb70 in hists__add_entry (sample_self=true, sample=0x7fffde7fb4b0, mi=0x0, bi=0x0, sym_parent=<optimized out>, al=<optimized out>, hists=0x5555561d9e38) at util/hist.c:1056 #7 iter_add_single_cumulative_entry (iter=0x7fffde7fb460, al=<optimized out>) at util/hist.c:1056 #8 0x00005555558cc8a4 in hist_entry_iter__add (iter=iter@entry=0x7fffde7fb460, al=al@entry=0x7fffde7fb420, max_stack_depth=<optimized out>, arg=arg@entry=0x7fffffff7db0) at util/hist.c:1231 #9 0x00005555557cdc9a in perf_event__process_sample (machine=<optimized out>, sample=0x7fffde7fb4b0, evsel=<optimized out>, event=<optimized out>, tool=0x7fffffff7db0) at builtin-top.c:842 #10 deliver_event (qe=<optimized out>, qevent=<optimized out>) at builtin-top.c:1202 #11 0x00005555558a9318 in do_flush (show_progress=false, oe=0x7fffffff80e0) at util/ordered-events.c:244 #12 __ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP, timestamp=timestamp@entry=0) at util/ordered-events.c:323 #13 0x00005555558a9789 in __ordered_events__flush (timestamp=<optimized out>, how=<optimized out>, oe=<optimized out>) at util/ordered-events.c:339 #14 ordered_events__flush (how=OE_FLUSH__TOP, oe=0x7fffffff80e0) at util/ordered-events.c:341 #15 ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP) at util/ordered-events.c:339 #16 0x00005555557cd631 in process_thread (arg=0x7fffffff7db0) at builtin-top.c:1114 #17 0x00007ffff7bb817a in start_thread () from /lib64/libpthread.so.0 #18 0x00007ffff5656dc3 in clone () from /lib64/libc.so.6 If you look at the frame #2, the code is: 488 if (he->srcline) { 489 he->srcline = strdup(he->srcline); 490 if (he->srcline == NULL) 491 goto err_rawdata; 492 } If he->srcline is not NULL (it is not NULL if it is uninitialized rubbish), it gets strdupped and strdupping a rubbish random string causes the problem. Also, if you look at the commit 1fb7d06, it adds the srcline property into the struct, but not initializing it everywhere needed. Committer notes: Now I see, when using --ignore-callees=do_idle we end up here at line 2189 in add_callchain_ip(): 2181 if (al.sym != NULL) { 2182 if (perf_hpp_list.parent && !*parent && 2183 symbol__match_regex(al.sym, &parent_regex)) 2184 *parent = al.sym; 2185 else if (have_ignore_callees && root_al && 2186 symbol__match_regex(al.sym, &ignore_callees_regex)) { 2187 /* Treat this symbol as the root, 2188 forgetting its callees. */ 2189 *root_al = al; 2190 callchain_cursor_reset(cursor); 2191 } 2192 } And the al that doesn't have the ->srcline field initialized will be copied to the root_al, so then, back to: 1211 int hist_entry_iter__add(struct hist_entry_iter *iter, struct addr_location *al, 1212 int max_stack_depth, void *arg) 1213 { 1214 int err, err2; 1215 struct map *alm = NULL; 1216 1217 if (al) 1218 alm = map__get(al->map); 1219 1220 err = sample__resolve_callchain(iter->sample, &callchain_cursor, &iter->parent, 1221 iter->evsel, al, max_stack_depth); 1222 if (err) { 1223 map__put(alm); 1224 return err; 1225 } 1226 1227 err = iter->ops->prepare_entry(iter, al); 1228 if (err) 1229 goto out; 1230 1231 err = iter->ops->add_single_entry(iter, al); 1232 if (err) 1233 goto out; 1234 That al at line 1221 is what hist_entry_iter__add() (called from sample__resolve_callchain()) saw as 'root_al', and then: iter->ops->add_single_entry(iter, al); will go on with al->srcline with a bogus value, I'll add the above sequence to the cset and apply, thanks! Signed-off-by: Michael Petlan <mpetlan@redhat.com> CC: Milian Wolff <milian.wolff@kdab.com> Cc: Jiri Olsa <jolsa@redhat.com> Fixes: 1fb7d06 ("perf report Use srcline from callchain for hist entries") Link: https //lore.kernel.org/r/20210719145332.29747-1-mpetlan@redhat.com Reported-by: Juri Lelli <jlelli@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

FD uses xyarray__entry that may return NULL if an index is out of bounds. If NULL is returned then a segv happens as FD unconditionally dereferences the pointer. This was happening in a case of with perf iostat as shown below. The fix is to make FD an "int*" rather than an int and handle the NULL case as either invalid input or a closed fd. $ sudo gdb --args perf stat --iostat list ... Breakpoint 1, perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50 50 { (gdb) bt #0 perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50 #1 0x000055555585c188 in evsel__open_cpu (evsel=0x5555560951a0, cpus=0x555556093410, threads=0x555556086fb0, start_cpu=0, end_cpu=1) at util/evsel.c:1792 #2 0x000055555585cfb2 in evsel__open (evsel=0x5555560951a0, cpus=0x0, threads=0x555556086fb0) at util/evsel.c:2045 #3 0x000055555585d0db in evsel__open_per_thread (evsel=0x5555560951a0, threads=0x555556086fb0) at util/evsel.c:2065 #4 0x00005555558ece64 in create_perf_stat_counter (evsel=0x5555560951a0, config=0x555555c34700 <stat_config>, target=0x555555c2f1c0 <target>, cpu=0) at util/stat.c:590 #5 0x000055555578e927 in __run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0) at builtin-stat.c:833 #6 0x000055555578f3c6 in run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0) at builtin-stat.c:1048 #7 0x0000555555792ee5 in cmd_stat (argc=1, argv=0x7fffffffe4a0) at builtin-stat.c:2534 #8 0x0000555555835ed3 in run_builtin (p=0x555555c3f540 <commands+288>, argc=3, argv=0x7fffffffe4a0) at perf.c:313 #9 0x0000555555836154 in handle_internal_command (argc=3, argv=0x7fffffffe4a0) at perf.c:365 #10 0x000055555583629f in run_argv (argcp=0x7fffffffe2ec, argv=0x7fffffffe2e0) at perf.c:409 #11 0x0000555555836692 in main (argc=3, argv=0x7fffffffe4a0) at perf.c:539 ... (gdb) c Continuing. Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (uncore_iio_0/event=0x83,umask=0x04,ch_mask=0xF,fc_mask=0x07/). /bin/dmesg | grep -i perf may provide additional information. Program received signal SIGSEGV, Segmentation fault. 0x00005555559b03ea in perf_evsel__close_fd_cpu (evsel=0x5555560951a0, cpu=1) at evsel.c:166 166 if (FD(evsel, cpu, thread) >= 0) v3. fixes a bug in perf_evsel__run_ioctl where the sense of a branch was backward. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20210918054440.2350466-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Peter's e-mail in MAINTAINERS is defunct: This is the qmail-send program at a.mx.sunsite.dk. <jacmet@sunsite.dk>: Sorry, no mailbox here by that name. (#5.1.1) Peter says: ** Ahh yes, it should be changed to peter@korsgaard.com. However he also says: ** I haven't had access to c67x00 hw for quite some years though, so maybe ** it should be marked Orphan instead? So change as he wishes. Cc: Peter Korsgaard <peter@korsgaard.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-usb@vger.kernel.org Acked-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210922063008.25758-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Ido Schimmel says: ==================== mlxsw: Add support for IP-in-IP with IPv6 underlay Currently, mlxsw only supports IP-in-IP with IPv4 underlay. Traffic routed through 'gre' netdevs is encapsulated with IPv4 and GRE headers. Similarly, incoming IPv4 GRE packets are decapsulated and routed in the overlay VRF (which can be the same as the underlay VRF). This patchset adds support for IPv6 underlay using the 'ip6gre' netdev. Due to architectural differences between Spectrum-1 and later ASICs, this functionality is only supported on Spectrum-2 onwards (the software data path is used for Spectrum-1). Patchset overview: Patches #1-#5 are preparations. Patches #6-#9 add and extend required device registers. Patches #10-#14 gradually add IPv6 underlay support. A follow-up patchset will add net/forwarding/ selftests. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

…r-mode' Ido Schimmel says: ==================== ethtool: Add ability to control transceiver modules' power mode This patchset extends the ethtool netlink API to allow user space to control transceiver modules. Two specific APIs are added, but the plan is to extend the interface with more APIs in the future (see "Future plans"). This submission is a complete rework of a previous submission [1] that tried to achieve the same goal by allowing user space to write to the EEPROMs of these modules. It was rejected as it could have enabled user space binary blob drivers. However, the main issue is that by directly writing to some pages of these EEPROMs, we are interfering with the entity that is controlling the modules (kernel / device firmware). In addition, some functionality cannot be implemented solely by writing to the EEPROM, as it requires the assertion / de-assertion of hardware signals (e.g., "ResetL" pin in SFF-8636). Motivation ========== The kernel can currently dump the contents of module EEPROMs to user space via the ethtool legacy ioctl API or the new netlink API. These dumps can then be parsed by ethtool(8) according to the specification that defines the memory map of the EEPROM. For example, SFF-8636 [2] for QSFP and CMIS [3] for QSFP-DD. In addition to read-only elements, these specifications also define writeable elements that can be used to control the behavior of the module. For example, controlling whether the module is put in low or high power mode to limit its power consumption. The CMIS specification even defines a message exchange mechanism (CDB, Command Data Block) on top of the module's memory map. This allows the host to send various commands to the module. For example, to update its firmware. Implementation ============== The ethtool netlink API is extended with two new messages, 'ETHTOOL_MSG_MODULE_SET' and 'ETHTOOL_MSG_MODULE_GET', that allow user space to set and get transceiver module parameters. Specifically, the 'ETHTOOL_A_MODULE_POWER_MODE_POLICY' attribute allows user space to control the power mode policy of the module in order to limit its power consumption. See detailed description in patch #1. The user API is designed to be generic enough so that it could be used for modules with different memory maps (e.g., SFF-8636, CMIS). The only implementation of the device driver API in this series is for a MAC driver (mlxsw) where the module is controlled by the device's firmware, but it is designed to be generic enough so that it could also be used by implementations where the module is controlled by the kernel. Testing and introspection ========================= See detailed description in patches #1 and #5. Patchset overview ================= Patch #1 adds the initial infrastructure in ethtool along with the ability to control transceiver modules' power mode. Patches #2-#3 add required device registers in mlxsw. Patch #4 implements in mlxsw the ethtool operations added in patch #1. Patch #5 adds extended link states in order to allow user space to troubleshoot link down issues related to transceiver modules. Patch #6 adds support for these extended states in mlxsw. Future plans ============ * Extend 'ETHTOOL_MSG_MODULE_SET' to control Tx output among other attributes. * Add new ethtool message(s) to update firmware on transceiver modules. * Extend ethtool(8) to parse more diagnostic information from CMIS modules. No kernel changes required. [1] https://lore.kernel.org/netdev/20210623075925.2610908-1-idosch@idosch.org/ [2] https://members.snia.org/document/dl/26418 [3] http://www.qsfp-dd.com/wp-content/uploads/2021/05/CMIS5p0.pdf Previous versions: [4] https://lore.kernel.org/netdev/20211003073219.1631064-1-idosch@idosch.org/ [5] https://lore.kernel.org/netdev/20210824130344.1828076-1-idosch@idosch.org/ [6] https://lore.kernel.org/netdev/20210818155202.1278177-1-idosch@idosch.org/ [7] https://lore.kernel.org/netdev/20210809102152.719961-1-idosch@idosch.org/ ==================== Link: https://lore.kernel.org/r/20211006104647.2357115-1-idosch@idosch.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Ido Schimmel says: ==================== selftests: forwarding: Add ip6gre tests This patchset adds forwarding selftests for ip6gre. The tests can be run with veth pairs or with physical loopbacks. Patch #1 adds a new config option to determine if 'skip_sw' / 'skip_hw' flags are used when installing tc filters. By default, it is not set which means the flags are not used. 'skip_sw' is useful to ensure traffic is forwarded by the hardware data path. Patch #2 adds a new helper function. Patches #3-#4 add the forwarding selftests. Patch #5 adds a mlxsw-specific selftest to validate correct behavior of the 'decap_error' trap with IPv6 underlay. Patches #6-#8 align the corresponding IPv4 underlay test to the IPv6 one. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

On SiFive Unmatched, I recently fell onto the following BUG when booting: [ 0.000000] ftrace: allocating 36610 entries in 144 pages [ 0.000000] Oops - illegal instruction [#1] [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.13.1+ #5 [ 0.000000] Hardware name: SiFive HiFive Unmatched A00 (DT) [ 0.000000] epc : riscv_cpuid_to_hartid_mask+0x6/0xae [ 0.000000] ra : __sbi_rfence_v02+0xc8/0x10a [ 0.000000] epc : ffffffff80007240 ra : ffffffff80009964 sp : ffffffff81803e10 [ 0.000000] gp : ffffffff81a1ea70 tp : ffffffff8180f500 t0 : ffffffe07fe30000 [ 0.000000] t1 : 0000000000000004 t2 : 0000000000000000 s0 : ffffffff81803e60 [ 0.000000] s1 : 0000000000000000 a0 : ffffffff81a22238 a1 : ffffffff81803e10 [ 0.000000] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000 [ 0.000000] a5 : 0000000000000000 a6 : ffffffff8000989c a7 : 0000000052464e43 [ 0.000000] s2 : ffffffff81a220c8 s3 : 0000000000000000 s4 : 0000000000000000 [ 0.000000] s5 : 0000000000000000 s6 : 0000000200000100 s7 : 0000000000000001 [ 0.000000] s8 : ffffffe07fe04040 s9 : ffffffff81a22c80 s10: 0000000000001000 [ 0.000000] s11: 0000000000000004 t3 : 0000000000000001 t4 : 0000000000000008 [ 0.000000] t5 : ffffffcf04000808 t6 : ffffffe3ffddf188 [ 0.000000] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000002 [ 0.000000] [<ffffffff80007240>] riscv_cpuid_to_hartid_mask+0x6/0xae [ 0.000000] [<ffffffff80009474>] sbi_remote_fence_i+0x1e/0x26 [ 0.000000] [<ffffffff8000b8f4>] flush_icache_all+0x12/0x1a [ 0.000000] [<ffffffff8000666c>] patch_text_nosync+0x26/0x32 [ 0.000000] [<ffffffff8000884e>] ftrace_init_nop+0x52/0x8c [ 0.000000] [<ffffffff800f051e>] ftrace_process_locs.isra.0+0x29c/0x360 [ 0.000000] [<ffffffff80a0e3c6>] ftrace_init+0x80/0x130 [ 0.000000] [<ffffffff80a00f8c>] start_kernel+0x5c4/0x8f6 [ 0.000000] ---[ end trace f67eb9af4d8d492b ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! [ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]--- While ftrace is looping over a list of addresses to patch, it always failed when patching the same function: riscv_cpuid_to_hartid_mask. Looking at the backtrace, the illegal instruction is encountered in this same function. However, patch_text_nosync, after patching the instructions, calls flush_icache_range. But looking at what happens in this function: flush_icache_range -> flush_icache_all -> sbi_remote_fence_i -> __sbi_rfence_v02 -> riscv_cpuid_to_hartid_mask The icache and dcache of the current cpu are never synchronized between the patching of riscv_cpuid_to_hartid_mask and calling this same function. So fix this by flushing the current cpu's icache before asking for the other cpus to do the same. Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Fixes: fab957c ("RISC-V: Atomic and Locking Code") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Ido Schimmel says: ==================== mlxsw: Add support for ECN mirroring Petr says: Patches in this set have been floating around for some time now together with trap_fwd support. That will however need more work, time for which is nowhere to be found, apparently. Instead, this patchset enables offload of only packet mirroring on RED mark qevent, enabling mirroring of ECN-marked packets. Formally it enables offload of filters added to blocks bound to the RED qevent mark if: - The switch ASIC is Spectrum-2 or above. - Only a single filter is attached at the block, at chain 0 (the default), and its classifier is matchall. - The filter has hw_stats set to disabled. - The filter has a single action, which is mirror. This differs from early_drop qevent offload, which supports mirroring and trapping. However trapping in context of ECN-marked packets is not suitable, because the HW does not drop the packet, as the trap action implies. And there is as of now no way to express only the part of trapping that transfers the packet to the SW datapath, sans the HW-datapath drop. The patchset progresses as follows: Patch #1 is an extack propagation. Mirroring of ECN-marked packets is configured in the ASIC through an ECN trigger, which is considered "egress", unlike the EARLY_DROP trigger. In patch #2, add a helper to classify triggers as ingress. As clarified above, traps cannot be offloaded on mark qevent. Similarly, given a trap_fwd action, it would not be offloadable on early_drop qevent. In patch #3, introduce support for tracking actions permissible on a given block. Patch #4 actually adds the mark qevent offload. In patch #5, fix a small style issue in one of the selftests, and in patch #6 add mark offload selftests. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

Sebastian Andrzej Siewior says: ==================== Try to simplify the gnet_stats and remove qdisc->running sequence counter. The first few patches is a follow up to https://lore.kernel.org/all/20211007175000.2334713-1-bigeasy@linutronix.de/ The remaining patches (#5+) remove the seqcount_t (Qdisc::running) from the Qdisc. The statistics (Qdisc::bstats and Qdisc::cpu_bstats) use u64_stats_t and the "running state" is now represented by a bit in Qdisc::state. By removing the seqcount_t from Qdisc and decoupling the bstats statistics from the seqcount_t it is possible to query the statistics even if the Qdisc is running instead of waiting until it is idle again. The try-lock like usage of the seqcount_t in qdisc_run_begin() is problematic on PREEMPT_RT. Inside the qdisc_run_begin/end() qdisc->running sequence counter write sections, at sch_direct_xmit(), the seqcount write serialization lock is released then re-acquired. This is fine for !RT, because the writer is in a BH disabled region and there is a no in-IRQ reader. For RT though, BH sections are preemptible. The earlier introduced seqcount_LOCKNAME_t mechanism, which for RT the reader acquires then relesaes the write serailization lock to avoid infinite spinning if it preempts a seqcount write section, cannot work: the qdisc->running write serialization lock is already intermittingly released inside the seqcount write section. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says: ==================== mlxsw: Multi-level qdisc offload Petr says: Currently, mlxsw admits for offload a suitable root qdisc, and its children. Thus up to two levels of hierarchy are offloaded. Often, this is enough: one can configure TCs with RED and TCs with a shaper on, and can even see counters for each TC by looking at a qdisc at a sufficiently shallow position. While simple, the system has obvious shortcomings. It is not possible to configure both RED and shaping on one TC. It is not possible to place a PRIO below root TBF, which would then be offloaded as port shaper. FIFOs are only offloaded at root or directly below, which is confusing to users, because RED and TBF of course have their own FIFO. This patch set lifts assumptions that prevent offloading multi-level qdisc trees. In patch #1, offload of a graft operation is added to TBF. Grafts are issued as another qdisc is linked to the qdisc in question, and give drivers a chance to react to the linking. The absence of this event was not a major issue so far, because TBF was not considered classful, which changes with this patchset. The codebase currently assumes that ETS and PRIO are the only classful qdiscs. The following patches gradually lift this assumption. In patch #2, calculation of traffic class and priomap of a qdisc is fixed. Patch #3 fixes handling of future FIFOs. Child FIFO qdiscs may be created and notified before their parent qdisc exists and therefore need special handling. Patches #4, #5 and #6 unify, respectively, child destruction, child grafting, and cleanup of statistics. Patch #7 adds a function that validates whether a given qdisc topology is offloadable. Finally in patch #8, TBF and RED become classful. At this point, FIFO qdiscs grafted to an offloaded qdisc should always be offloaded. Patch #9 adds a selftest to verify some offloadable and unoffloadable qdisc trees. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says: ==================== mlxsw: Support multiple RIF MAC prefixes Currently, mlxsw enforces that all the netdevs used as router interfaces (RIFs) have the same MAC prefix (e.g., same 38 MSBs in Spectrum-1). Otherwise, an error is returned to user space with extack. This patchset relaxes the limitation through the use of RIF MAC profiles. A RIF MAC profile is a hardware entity that represents a particular MAC prefix which multiple RIFs can reference. Therefore, the number of possible MAC prefixes is no longer one, but the number of profiles supported by the device. The ability to change the MAC of a particular netdev is useful, for example, for users who use the netdev to connect to an upstream provider that performs MAC filtering. Currently, such users are either forced to negotiate with the provider or change the MAC address of all other netdevs so that they share the same prefix. Patchset overview: Patches #1-#3 are preparations. Patch #4 adds actual support for RIF MAC profiles. Patch #5 exposes RIF MAC profiles as a devlink resource, so that user space has visibility into the maximum number of profiles and current occupancy. Useful for debugging and testing (next 3 patches). Patches #6-#8 add both scale and functional tests. Patch #9 removes tests that validated the previous limitation. It is now covered by patch #6 for devices that support a single profile. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

We got the following lockdep splat while running fstests (specifically btrfs/003 and btrfs/020 in a row) with the new rc. This was uncovered by 87579e9 ("loop: use worker per cgroup instead of kworker") which converted loop to using workqueues, which comes with lockdep annotations that don't exist with kworkers. The lockdep splat is as follows: WARNING: possible circular locking dependency detected 5.14.0-rc2-custom+ torvalds#34 Not tainted ------------------------------------------------------ losetup/156417 is trying to acquire lock: ffff9c7645b02d38 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x84/0x600 but task is already holding lock: ffff9c7647395468 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x650 [loop] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #5 (&lo->lo_mutex){+.+.}-{3:3}: __mutex_lock+0xba/0x7c0 lo_open+0x28/0x60 [loop] blkdev_get_whole+0x28/0xf0 blkdev_get_by_dev.part.0+0x168/0x3c0 blkdev_open+0xd2/0xe0 do_dentry_open+0x163/0x3a0 path_openat+0x74d/0xa40 do_filp_open+0x9c/0x140 do_sys_openat2+0xb1/0x170 __x64_sys_openat+0x54/0x90 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #4 (&disk->open_mutex){+.+.}-{3:3}: __mutex_lock+0xba/0x7c0 blkdev_get_by_dev.part.0+0xd1/0x3c0 blkdev_get_by_path+0xc0/0xd0 btrfs_scan_one_device+0x52/0x1f0 [btrfs] btrfs_control_ioctl+0xac/0x170 [btrfs] __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #3 (uuid_mutex){+.+.}-{3:3}: __mutex_lock+0xba/0x7c0 btrfs_rm_device+0x48/0x6a0 [btrfs] btrfs_ioctl+0x2d1c/0x3110 [btrfs] __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #2 (sb_writers#11){.+.+}-{0:0}: lo_write_bvec+0x112/0x290 [loop] loop_process_work+0x25f/0xcb0 [loop] process_one_work+0x28f/0x5d0 worker_thread+0x55/0x3c0 kthread+0x140/0x170 ret_from_fork+0x22/0x30 -> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}: process_one_work+0x266/0x5d0 worker_thread+0x55/0x3c0 kthread+0x140/0x170 ret_from_fork+0x22/0x30 -> #0 ((wq_completion)loop0){+.+.}-{0:0}: __lock_acquire+0x1130/0x1dc0 lock_acquire+0xf5/0x320 flush_workqueue+0xae/0x600 drain_workqueue+0xa0/0x110 destroy_workqueue+0x36/0x250 __loop_clr_fd+0x9a/0x650 [loop] lo_ioctl+0x29d/0x780 [loop] block_ioctl+0x3f/0x50 __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: (wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&lo->lo_mutex); lock(&disk->open_mutex); lock(&lo->lo_mutex); lock((wq_completion)loop0); *** DEADLOCK *** 1 lock held by losetup/156417: #0: ffff9c7647395468 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x650 [loop] stack backtrace: CPU: 8 PID: 156417 Comm: losetup Not tainted 5.14.0-rc2-custom+ torvalds#34 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: dump_stack_lvl+0x57/0x72 check_noncircular+0x10a/0x120 __lock_acquire+0x1130/0x1dc0 lock_acquire+0xf5/0x320 ? flush_workqueue+0x84/0x600 flush_workqueue+0xae/0x600 ? flush_workqueue+0x84/0x600 drain_workqueue+0xa0/0x110 destroy_workqueue+0x36/0x250 __loop_clr_fd+0x9a/0x650 [loop] lo_ioctl+0x29d/0x780 [loop] ? __lock_acquire+0x3a0/0x1dc0 ? update_dl_rq_load_avg+0x152/0x360 ? lock_is_held_type+0xa5/0x120 ? find_held_lock.constprop.0+0x2b/0x80 block_ioctl+0x3f/0x50 __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f645884de6b Usually the uuid_mutex exists to protect the fs_devices that map together all of the devices that match a specific uuid. In rm_device we're messing with the uuid of a device, so it makes sense to protect that here. However in doing that it pulls in a whole host of lockdep dependencies, as we call mnt_may_write() on the sb before we grab the uuid_mutex, thus we end up with the dependency chain under the uuid_mutex being added under the normal sb write dependency chain, which causes problems with loop devices. We don't need the uuid mutex here however. If we call btrfs_scan_one_device() before we scratch the super block we will find the fs_devices and not find the device itself and return EBUSY because the fs_devices is open. If we call it after the scratch happens it will not appear to be a valid btrfs file system. We do not need to worry about other fs_devices modifying operations here because we're protected by the exclusive operations locking. So drop the uuid_mutex here in order to fix the lockdep splat. A more detailed explanation from the discussion: We are worried about rm and scan racing with each other, before this change we'll zero the device out under the UUID mutex so when scan does run it'll make sure that it can go through the whole device scan thing without rm messing with us. We aren't worried if the scratch happens first, because the result is we don't think this is a btrfs device and we bail out. The only case we are concerned with is we scratch _after_ scan is able to read the superblock and gets a seemingly valid super block, so lets consider this case. Scan will call device_list_add() with the device we're removing. We'll call find_fsid_with_metadata_uuid() and get our fs_devices for this UUID. At this point we lock the fs_devices->device_list_mutex. This is what protects us in this case, but we have two cases here. 1. We aren't to the device removal part of the RM. We found our device, and device name matches our path, we go down and we set total_devices to our super number of devices, which doesn't affect anything because we haven't done the remove yet. 2. We are past the device removal part, which is protected by the device_list_mutex. Scan doesn't find the device, it goes down and does the if (fs_devices->opened) return -EBUSY; check and we bail out. Nothing about this situation is ideal, but the lockdep splat is real, and the fix is safe, tho admittedly a bit scary looking. Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> [ copy more from the discussion ] Signed-off-by: David Sterba <dsterba@suse.com>

Attempting to defragment a Btrfs file containing a transparent huge page immediately deadlocks with the following stack trace: #0 context_switch (kernel/sched/core.c:4940:2) #1 __schedule (kernel/sched/core.c:6287:8) #2 schedule (kernel/sched/core.c:6366:3) #3 io_schedule (kernel/sched/core.c:8389:2) #4 wait_on_page_bit_common (mm/filemap.c:1356:4) #5 __lock_page (mm/filemap.c:1648:2) #6 lock_page (./include/linux/pagemap.h:625:3) #7 pagecache_get_page (mm/filemap.c:1910:4) #8 find_or_create_page (./include/linux/pagemap.h:420:9) #9 defrag_prepare_one_page (fs/btrfs/ioctl.c:1068:9) #10 defrag_one_range (fs/btrfs/ioctl.c:1326:14) #11 defrag_one_cluster (fs/btrfs/ioctl.c:1421:9) #12 btrfs_defrag_file (fs/btrfs/ioctl.c:1523:9) #13 btrfs_ioctl_defrag (fs/btrfs/ioctl.c:3117:9) #14 btrfs_ioctl (fs/btrfs/ioctl.c:4872:10) #15 vfs_ioctl (fs/ioctl.c:51:10) #16 __do_sys_ioctl (fs/ioctl.c:874:11) #17 __se_sys_ioctl (fs/ioctl.c:860:1) #18 __x64_sys_ioctl (fs/ioctl.c:860:1) #19 do_syscall_x64 (arch/x86/entry/common.c:50:14) #20 do_syscall_64 (arch/x86/entry/common.c:80:7) #21 entry_SYSCALL_64+0x7c/0x15b (arch/x86/entry/entry_64.S:113) A huge page is represented by a compound page, which consists of a struct page for each PAGE_SIZE page within the huge page. The first struct page is the "head page", and the remaining are "tail pages". Defragmentation attempts to lock each page in the range. However, lock_page() on a tail page actually locks the corresponding head page. So, if defragmentation tries to lock more than one struct page in a compound page, it tries to lock the same head page twice and deadlocks with itself. Ideally, we should be able to defragment transparent huge pages. However, THP for filesystems is currently read-only, so a lot of code is not ready to use huge pages for I/O. For now, let's just return ETXTBUSY. This can be reproduced with the following on a kernel with CONFIG_READ_ONLY_THP_FOR_FS=y: $ cat create_thp_file.c #include <fcntl.h> #include <stdbool.h> #include <stdio.h> #include <stdint.h> #include <stdlib.h> #include <unistd.h> #include <sys/mman.h> static const char zeroes[1024 * 1024]; static const size_t FILE_SIZE = 2 * 1024 * 1024; int main(int argc, char **argv) { if (argc != 2) { fprintf(stderr, "usage: %s PATH\n", argv[0]); return EXIT_FAILURE; } int fd = creat(argv[1], 0777); if (fd == -1) { perror("creat"); return EXIT_FAILURE; } size_t written = 0; while (written < FILE_SIZE) { ssize_t ret = write(fd, zeroes, sizeof(zeroes) < FILE_SIZE - written ? sizeof(zeroes) : FILE_SIZE - written); if (ret < 0) { perror("write"); return EXIT_FAILURE; } written += ret; } close(fd); fd = open(argv[1], O_RDONLY); if (fd == -1) { perror("open"); return EXIT_FAILURE; } /* * Reserve some address space so that we can align the file mapping to * the huge page size. */ void *placeholder_map = mmap(NULL, FILE_SIZE * 2, PROT_NONE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); if (placeholder_map == MAP_FAILED) { perror("mmap (placeholder)"); return EXIT_FAILURE; } void *aligned_address = (void *)(((uintptr_t)placeholder_map + FILE_SIZE - 1) & ~(FILE_SIZE - 1)); void *map = mmap(aligned_address, FILE_SIZE, PROT_READ | PROT_EXEC, MAP_SHARED | MAP_FIXED, fd, 0); if (map == MAP_FAILED) { perror("mmap"); return EXIT_FAILURE; } if (madvise(map, FILE_SIZE, MADV_HUGEPAGE) < 0) { perror("madvise"); return EXIT_FAILURE; } char *line = NULL; size_t line_capacity = 0; FILE *smaps_file = fopen("/proc/self/smaps", "r"); if (!smaps_file) { perror("fopen"); return EXIT_FAILURE; } for (;;) { for (size_t off = 0; off < FILE_SIZE; off += 4096) ((volatile char *)map)[off]; ssize_t ret; bool this_mapping = false; while ((ret = getline(&line, &line_capacity, smaps_file)) > 0) { unsigned long start, end, huge; if (sscanf(line, "%lx-%lx", &start, &end) == 2) { this_mapping = (start <= (uintptr_t)map && (uintptr_t)map < end); } else if (this_mapping && sscanf(line, "FilePmdMapped: %ld", &huge) == 1 && huge > 0) { return EXIT_SUCCESS; } } sleep(6); rewind(smaps_file); fflush(smaps_file); } } $ ./create_thp_file huge $ btrfs fi defrag -czstd ./huge Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

The Xen interrupt injection for event channels relies on accessing the guest's vcpu_info structure in __kvm_xen_has_interrupt(), through a gfn_to_hva_cache. This requires the srcu lock to be held, which is mostly the case except for this code path: [ 11.822877] WARNING: suspicious RCU usage [ 11.822965] ----------------------------- [ 11.823013] include/linux/kvm_host.h:664 suspicious rcu_dereference_check() usage! [ 11.823131] [ 11.823131] other info that might help us debug this: [ 11.823131] [ 11.823196] [ 11.823196] rcu_scheduler_active = 2, debug_locks = 1 [ 11.823253] 1 lock held by dom:0/90: [ 11.823292] #0: ffff998956ec8118 (&vcpu->mutex){+.+.}, at: kvm_vcpu_ioctl+0x85/0x680 [ 11.823379] [ 11.823379] stack backtrace: [ 11.823428] CPU: 2 PID: 90 Comm: dom:0 Kdump: loaded Not tainted 5.4.34+ #5 [ 11.823496] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 11.823612] Call Trace: [ 11.823645] dump_stack+0x7a/0xa5 [ 11.823681] lockdep_rcu_suspicious+0xc5/0x100 [ 11.823726] __kvm_xen_has_interrupt+0x179/0x190 [ 11.823773] kvm_cpu_has_extint+0x6d/0x90 [ 11.823813] kvm_cpu_accept_dm_intr+0xd/0x40 [ 11.823853] kvm_vcpu_ready_for_interrupt_injection+0x20/0x30 < post_kvm_run_save() inlined here > [ 11.823906] kvm_arch_vcpu_ioctl_run+0x135/0x6a0 [ 11.823947] kvm_vcpu_ioctl+0x263/0x680 Fixes: 40da8cc ("KVM: x86/xen: Add event channel interrupt vector upcall") Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Cc: stable@vger.kernel.org Message-Id: <606aaaf29fca3850a63aa4499826104e77a72346.camel@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Convert the netfs helper library to use folios throughout, convert the 9p and afs filesystems to use folios in their file I/O paths and convert the ceph filesystem to use just enough folios to compile. With these changes, afs passes -g quick xfstests. Changes ======= ver #5: - Got rid of folio_end{io,_read,_write}() and inlined the stuff it does instead (Willy decided he didn't want this after all). ver #4: - Fixed a bug in afs_redirty_page() whereby it didn't set the next page index in the loop and returned too early. - Simplified a check in v9fs_vfs_write_folio_locked()[1]. - Undid a change to afs_symlink_readpage()[1]. - Used offset_in_folio() in afs_write_end()[1]. - Changed from using page_endio() to folio_end{io,_read,_write}()[1]. ver #2: - Add 9p foliation. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dominique Martinet <asmadeus@codewreck.org> Tested-by: kafs-testing@auristor.com cc: Matthew Wilcox (Oracle) <willy@infradead.org> cc: Marc Dionne <marc.dionne@auristor.com> cc: Ilya Dryomov <idryomov@gmail.com> cc: Dominique Martinet <asmadeus@codewreck.org> cc: v9fs-developer@lists.sourceforge.net cc: linux-afs@lists.infradead.org cc: ceph-devel@vger.kernel.org cc: linux-cachefs@redhat.com Link: https://lore.kernel.org/r/YYKa3bfQZxK5/wDN@casper.infradead.org/ [1] Link: https://lore.kernel.org/r/2408234.1628687271@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/162877311459.3085614.10601478228012245108.stgit@warthog.procyon.org.uk/ Link: https://lore.kernel.org/r/162981153551.1901565.3124454657133703341.stgit@warthog.procyon.org.uk/ Link: https://lore.kernel.org/r/163005745264.2472992.9852048135392188995.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/163584187452.4023316.500389675405550116.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/163649328026.309189.1124218109373941936.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/163657852454.834781.9265101983152100556.stgit@warthog.procyon.org.uk/ # v5

The exit function fixes a memory leak with the src field as detected by leak sanitizer. An example of which is: Indirect leak of 25133184 byte(s) in 207 object(s) allocated from: #0 0x7f199ecfe987 in __interceptor_calloc libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x55defe638224 in annotated_source__alloc_histograms util/annotate.c:803 #2 0x55defe6397e4 in symbol__hists util/annotate.c:952 #3 0x55defe639908 in symbol__inc_addr_samples util/annotate.c:968 #4 0x55defe63aa29 in hist_entry__inc_addr_samples util/annotate.c:1119 #5 0x55defe499a79 in hist_iter__report_callback tools/perf/builtin-report.c:182 #6 0x55defe7a859d in hist_entry_iter__add util/hist.c:1236 #7 0x55defe49aa63 in process_sample_event tools/perf/builtin-report.c:315 #8 0x55defe731bc8 in evlist__deliver_sample util/session.c:1473 #9 0x55defe731e38 in machines__deliver_event util/session.c:1510 #10 0x55defe732a23 in perf_session__deliver_event util/session.c:1590 #11 0x55defe72951e in ordered_events__deliver_event util/session.c:183 #12 0x55defe740082 in do_flush util/ordered-events.c:244 #13 0x55defe7407cb in __ordered_events__flush util/ordered-events.c:323 #14 0x55defe740a61 in ordered_events__flush util/ordered-events.c:341 #15 0x55defe73837f in __perf_session__process_events util/session.c:2390 #16 0x55defe7385ff in perf_session__process_events util/session.c:2420 ... Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Liška <mliska@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20211112035124.94327-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

When reading the voltage: $ cat /sys/bus/iio/devices/iio\:device0/in_voltage0_raw Lockdep complains: [ 153.910616] ====================================================== [ 153.916918] WARNING: possible circular locking dependency detected [ 153.923221] 5.14.0+ #5 Not tainted [ 153.926692] ------------------------------------------------------ [ 153.932992] cat/717 is trying to acquire lock: [ 153.937525] c2585358 (&indio_dev->mlock){+.+.}-{3:3}, at: iio_device_claim_direct_mode+0x28/0x44 [ 153.946541] but task is already holding lock: [ 153.952487] c2585860 (&dln2->mutex){+.+.}-{3:3}, at: dln2_adc_read_raw+0x94/0x2bc [dln2_adc] [ 153.961152] which lock already depends on the new lock. Fix this by not calling into the iio core underneath the dln2->mutex lock. Fixes: 7c0299e ("iio: adc: Add support for DLN2 ADC") Cc: Jack Andersen <jackoalan@gmail.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: https://lore.kernel.org/r/20211018113731.25723-1-noralf@tronnes.org Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

With preemption enabled (CONFIG_DEBUG_PREEMPT=y), the following appeared when rnbd client tries to map remote block device. BUG: using smp_processor_id() in preemptible [00000000] code: bash/1733 caller is debug_smp_processor_id+0x17/0x20 CPU: 0 PID: 1733 Comm: bash Not tainted 5.16.0-rc1 #5 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x5d/0x78 dump_stack+0x10/0x12 check_preemption_disabled+0xe4/0xf0 debug_smp_processor_id+0x17/0x20 rtrs_clt_update_all_stats+0x3b/0x70 [rtrs_client] rtrs_clt_read_req+0xc3/0x380 [rtrs_client] ? rtrs_clt_init_req+0xe3/0x120 [rtrs_client] rtrs_clt_request+0x1a7/0x320 [rtrs_client] ? 0xffffffffc0ab1000 send_usr_msg+0xbf/0x160 [rnbd_client] ? rnbd_clt_put_sess+0x60/0x60 [rnbd_client] ? send_usr_msg+0x160/0x160 [rnbd_client] ? sg_alloc_table+0x27/0xb0 ? sg_zero_buffer+0xd0/0xd0 send_msg_sess_info+0xe9/0x180 [rnbd_client] ? rnbd_clt_put_sess+0x60/0x60 [rnbd_client] ? blk_mq_alloc_tag_set+0x2ef/0x370 rnbd_clt_map_device+0xba8/0xcd0 [rnbd_client] ? send_msg_open+0x200/0x200 [rnbd_client] rnbd_clt_map_device_store+0x3e5/0x620 [rnbd_client To supress the calltrace, let's call get_cpu_ptr/put_cpu_ptr pair in rtrs_clt_update_rdma_stats to disable preemption when accessing per-cpu variable. While at it, let's make the similar change in rtrs_clt_update_wc_stats. And for rtrs_clt_inc_failover_cnt, though it was only called inside rcu section, but it still can be preempted in case CONFIG_PREEMPT_RCU is enabled, so change it to {get,put}_cpu_ptr pair either. Link: https://lore.kernel.org/r/20211128133501.38710-1-guoqing.jiang@linux.dev Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

When kmalloc in nfc_genl_dump_devices() fails then nfc_genl_dump_devices_done() segfaults as below KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 PID: 25 Comm: kworker/0:1 Not tainted 5.16.0-rc4-01180-g2a987e65025e-dirty #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-6.fc35 04/01/2014 Workqueue: events netlink_sock_destruct_work RIP: 0010:klist_iter_exit+0x26/0x80 Call Trace: <TASK> class_dev_iter_exit+0x15/0x20 nfc_genl_dump_devices_done+0x3b/0x50 genl_lock_done+0x84/0xd0 netlink_sock_destruct+0x8f/0x270 __sk_destruct+0x64/0x3b0 sk_destruct+0xa8/0xd0 __sk_free+0x2e8/0x3d0 sk_free+0x51/0x90 netlink_sock_destruct_work+0x1c/0x20 process_one_work+0x411/0x710 worker_thread+0x6fd/0xa80 Link: https://syzkaller.appspot.com/bug?id=fc0fa5a53db9edd261d56e74325419faf18bd0df Reported-by: syzbot+f9f76f4a0766420b4a02@syzkaller.appspotmail.com Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20211208182742.340542-1-tadeusz.struk@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

For whatever reason, some devices like QCA6390, WCN6855 using ath11k are not in M3 state during PM resume, but still functional. The mhi_pm_resume should then not fail in those cases, and let the higher level device specific stack continue resuming process. Add an API mhi_pm_resume_force(), to force resuming irrespective of the current MHI state. This fixes a regression with non functional ath11k WiFi after suspend/resume cycle on some machines. Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=214179 Link: https://lore.kernel.org/regressions/871r5p0x2u.fsf@codeaurora.org/ Fixes: 020d3b2 ("bus: mhi: Early MHI resume failure in non M3 state") Cc: stable@vger.kernel.org #5.13 Reported-by: Kalle Valo <kvalo@codeaurora.org> Reported-by: Pengyu Ma <mapengyu@gmail.com> Tested-by: Kalle Valo <kvalo@kernel.org> Acked-by: Kalle Valo <kvalo@kernel.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> [mani: Switched to API, added bug report, reported-by tags and CCed stable] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20211209131633.4168-1-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The fixed commit attempts to close inject.output even if it was never opened e.g. $ perf record uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ] $ perf inject -i perf.data --vm-time-correlation=dry-run Segmentation fault (core dumped) $ gdb --quiet perf Reading symbols from perf... (gdb) r inject -i perf.data --vm-time-correlation=dry-run Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Program received signal SIGSEGV, Segmentation fault. 0x00007eff8afeef5b in _IO_new_fclose (fp=0x0) at iofclose.c:48 48 iofclose.c: No such file or directory. (gdb) bt #0 0x00007eff8afeef5b in _IO_new_fclose (fp=0x0) at iofclose.c:48 #1 0x0000557fc7b74f92 in perf_data__close (data=data@entry=0x7ffcdafa6578) at util/data.c:376 #2 0x0000557fc7a6b807 in cmd_inject (argc=<optimized out>, argv=<optimized out>) at builtin-inject.c:1085 #3 0x0000557fc7ac4783 in run_builtin (p=0x557fc8074878 <commands+600>, argc=4, argv=0x7ffcdafb6a60) at perf.c:313 #4 0x0000557fc7a25d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365 #5 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409 #6 main (argc=4, argv=0x7ffcdafb6a60) at perf.c:539 (gdb) Fixes: 02e6246 ("perf inject: Close inject.output on exit") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20211213084829.114772-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The fixed commit attempts to get the output file descriptor even if the file was never opened e.g. $ perf record uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ] $ perf inject -i perf.data --vm-time-correlation=dry-run Segmentation fault (core dumped) $ gdb --quiet perf Reading symbols from perf... (gdb) r inject -i perf.data --vm-time-correlation=dry-run Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Program received signal SIGSEGV, Segmentation fault. __GI___fileno (fp=0x0) at fileno.c:35 35 fileno.c: No such file or directory. (gdb) bt #0 __GI___fileno (fp=0x0) at fileno.c:35 #1 0x00005621e48dd987 in perf_data__fd (data=0x7fff4c68bd08) at util/data.h:72 #2 perf_data__fd (data=0x7fff4c68bd08) at util/data.h:69 #3 cmd_inject (argc=<optimized out>, argv=0x7fff4c69c1f0) at builtin-inject.c:1017 #4 0x00005621e4936783 in run_builtin (p=0x5621e4ee6878 <commands+600>, argc=4, argv=0x7fff4c69c1f0) at perf.c:313 #5 0x00005621e4897d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365 #6 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409 #7 main (argc=4, argv=0x7fff4c69c1f0) at perf.c:539 (gdb) Fixes: 0ae0389 ("perf tools: Pass a fd to perf_file_header__read_pipe()") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20211213084829.114772-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The rehash delayed work migrates filters from one region to another according to the number of available credits. The migrated from region is destroyed at the end of the work if the number of credits is non-negative as the assumption is that this is indicative of migration being complete. This assumption is incorrect as a non-negative number of credits can also be the result of a failed migration. The destruction of a region that still has filters referencing it can result in a use-after-free [1]. Fix by not destroying the region if migration failed. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_acl_ctcam_region_entry_remove+0x21d/0x230 Read of size 8 at addr ffff8881735319e8 by task kworker/0:31/3858 CPU: 0 PID: 3858 Comm: kworker/0:31 Tainted: G W 6.9.0-rc2-custom-00782-gf2275c2157d8 #5 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work Call Trace: <TASK> dump_stack_lvl+0xc6/0x120 print_report+0xce/0x670 kasan_report+0xd7/0x110 mlxsw_sp_acl_ctcam_region_entry_remove+0x21d/0x230 mlxsw_sp_acl_ctcam_entry_del+0x2e/0x70 mlxsw_sp_acl_atcam_entry_del+0x81/0x210 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x3cd/0xb50 mlxsw_sp_acl_tcam_vregion_rehash_work+0x157/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 174: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 __kmalloc+0x19c/0x360 mlxsw_sp_acl_tcam_region_create+0xdf/0x9c0 mlxsw_sp_acl_tcam_vregion_rehash_work+0x954/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 Freed by task 7: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 poison_slab_object+0x102/0x170 __kasan_slab_free+0x14/0x30 kfree+0xc1/0x290 mlxsw_sp_acl_tcam_region_destroy+0x272/0x310 mlxsw_sp_acl_tcam_vregion_rehash_work+0x731/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 Fixes: c9c9af9 ("mlxsw: spectrum_acl: Allow to interrupt/continue rehash work") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/3e412b5659ec2310c5c615760dfe5eac18dd7ebd.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Andrii Nakryiko says: ==================== bench: fast in-kernel triggering benchmarks Remove "legacy" triggering benchmarks which rely on syscalls (and thus syscall overhead is a noticeable part of benchmark, unfortunately). Replace them with faster versions that rely on triggering BPF programs in-kernel through another simple "driver" BPF program. See patch #2 with comparison results. raw_tp/tp/fmodret benchmarks required adding a simple kfunc in kernel to be able to trigger a simple tracepoint from BPF program (plus it is also allowed to be replaced by fmod_ret programs). This limits raw_tp/tp/fmodret benchmarks to new kernels only, but it keeps bench tool itself very portable and most of other benchmarks will still work on wide variety of kernels without the need to worry about building and deploying custom kernel module. See patches #5 and #6 for details. v1->v2: - move new TP closer to BPF test run code; - rename/move kfunc and register it for fmod_rets (Alexei); - limit --trig-batch-iters param to [1, 1000] (Alexei). ==================== Link: https://lore.kernel.org/r/20240326162151.3981687-1-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>

As reported by Jose E. Marchesi in off-list discussion, GCC and LLVM generate slightly different code for dummy_st_ops_success/test_1(): SEC("struct_ops/test_1") int BPF_PROG(test_1, struct bpf_dummy_ops_state *state) { int ret; if (!state) return 0xf2f3f4f5; ret = state->val; state->val = 0x5a; return ret; } GCC-generated LLVM-generated ---------------------------- --------------------------- 0: r1 = *(u64 *)(r1 + 0x0) 0: w0 = -0xd0c0b0b 1: if r1 == 0x0 goto 5f 1: r1 = *(u64 *)(r1 + 0x0) 2: r0 = *(s32 *)(r1 + 0x0) 2: if r1 == 0x0 goto 6f 3: *(u32 *)(r1 + 0x0) = 0x5a 3: r0 = *(u32 *)(r1 + 0x0) 4: exit 4: w2 = 0x5a 5: r0 = -0xd0c0b0b 5: *(u32 *)(r1 + 0x0) = r2 6: exit 6: exit If the 'state' argument is not marked as nullable in net/bpf/bpf_dummy_struct_ops.c, the verifier would assume that 'r1 == 0x0' is never true: - for the GCC version, this means that instructions #5-6 would be marked as dead and removed; - for the LLVM version, all instructions would be marked as live. The test dummy_st_ops/dummy_init_ret_value actually sets the 'state' parameter to NULL. Therefore, when the 'state' argument is not marked as nullable, the GCC-generated version of the code would trigger a NULL pointer dereference at instruction #3. This patch updates the test_1() test case to always follow a shape similar to the GCC-generated version above, in order to verify whether the 'state' nullability is marked correctly. Reported-by: Jose E. Marchesi <jemarch@gnu.org> Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20240424012821.595216-3-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Eduard Zingerman says: ==================== check bpf_dummy_struct_ops program params for test runs When doing BPF_PROG_TEST_RUN for bpf_dummy_struct_ops programs, execution should be rejected when NULL is passed for non-nullable params, because for such params verifier assumes that such params are never NULL and thus might optimize out NULL checks. This problem was reported by Jose E. Marchesi in off-list discussion. The code generated by GCC for dummy_st_ops_success/test_1() function differs from LLVM variant in a way that allows verifier to remove the NULL check. The test dummy_st_ops/dummy_init_ret_value actually sets the 'state' parameter to NULL, thus GCC-generated version of the test triggers NULL pointer dereference when BPF program is executed. This patch-set addresses the issue in the following steps: - patch #1 marks bpf_dummy_struct_ops.test_1 parameter as nullable, for verifier to have correct assumptions about test_1() programs; - patch #2 modifies dummy_st_ops/dummy_init_ret_value to trigger NULL dereference with both GCC and LLVM (if patch #1 is not applied); - patch #3 adjusts a few dummy_st_ops test cases to avoid passing NULL for 'state' parameter of test_2() and test_sleepable() functions, as parameters of these functions are not marked as nullable; - patch #4 adjusts bpf_dummy_struct_ops to reject test execution of programs if NULL is passed for non-nullable parameter; - patch #5 adds a test to verify logic from patch #4. ==================== Link: https://lore.kernel.org/r/20240424012821.595216-1-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Petr Machata says: ==================== mlxsw: Improve events processing performance Amit Cohen writes: Spectrum ASICs only support a single interrupt, it means that all the events are handled by one IRQ (interrupt request) handler. Currently, we schedule a tasklet to handle events in EQ, then we also use tasklet for CQ, SDQ and RDQ. Tasklet runs in softIRQ (software IRQ) context, and will be run on the same CPU which scheduled it. It means that today we have one CPU which handles all the packets (both network packets and EMADs) from hardware. The existing implementation is not efficient and can be improved. Measuring latency of EMADs in the driver (without the time in FW) shows that latency is increased by factor of 28 (x28) when network traffic is handled by the driver. Measuring throughput in CPU shows that CPU can handle ~35% less packets of specific flow when corrupted packets are also handled by the driver. There are cases that these values even worse, we measure decrease of ~44% packet rate. This can be improved if network packet and EMADs will be handled in parallel by several CPUs, and more than that, if different types of traffic will be handled in parallel. We can achieve this using NAPI. This set converts the driver to process completions from hardware via NAPI. The idea is to add NAPI instance per CQ (which is mapped 1:1 to SDQ/RDQ), which means that each DQ can be handled separately. we have DQ for EMADs and DQs for each trap group (like LLDP, BGP, L3 drops, etc..). See more details in commit messages. An additional improvement which is done as part of this set is related to doorbells' ring. The idea is to handle small chunks of Rx packets (which is also recommended using NAPI) and ring doorbells once per chunk. This reduces the access to hardware which is expensive (time wise) and might take time because of memory barriers. With this set we can see better performance. To summerize: EMADs latency: +------------------------------------------------------------------------+ | | Before this set | Now | |------------------|---------------------------|-------------------------| | Increased factor | x28 | x1.5 | +------------------------------------------------------------------------+ Note that we can see even measurements that show better latency when traffic is handled by the driver. Throughput: +------------------------------------------------------------------------+ | | Before this set | Now | |-------------|----------------------------|-----------------------------| | Reduced | 35% | 6% | | packet rate | | | +------------------------------------------------------------------------+ Additional improvements are planned - use page pool for buffer allocations and avoid cache miss of each SKB using napi_build_skb(). Patch set overview: Patches #1-#2 improve access to hardware by reducing dorbells' rings Patch #3-#4 are preaparations for NAPI usage Patch #5 converts the driver to use NAPI ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

Wen Gu says: ==================== net/smc: SMC intra-OS shortcut with loopback-ism This patch set acts as the second part of the new version of [1] (The first part can be referred from [2]), the updated things of this version are listed at the end. - Background SMC-D is now used in IBM z with ISM function to optimize network interconnect for intra-CPC communications. Inspired by this, we try to make SMC-D available on the non-s390 architecture through a software-implemented Emulated-ISM device, that is the loopback-ism device here, to accelerate inter-process or inter-containers communication within the same OS instance. - Design This patch set includes 3 parts: - Patch #1: some prepare work for loopback-ism. - Patch #2-#7: implement loopback-ism device and adapt SMC-D for it. loopback-ism now serves only SMC and no userspace interfaces exposed. - Patch #8-#11: memory copy optimization for intra-OS scenario. The loopback-ism device is designed as an ISMv2 device and not be limited to a specific net namespace, ends of both inter-process connection (1/1' in diagram below) or inter-container connection (2/2' in diagram below) can find the same available loopback-ism and choose it during the CLC handshake. Container 1 (ns1) Container 2 (ns2) +-----------------------------------------+ +-------------------------+ | +-------+ +-------+ +-------+ | | +-------+ | | | App A | | App B | | App C | | | | App D |<-+ | | +-------+ +---^---+ +-------+ | | +-------+ |(2') | | |127.0.0.1 (1')| |192.168.0.11 192.168.0.12| | | (1)| +--------+ | +--------+ |(2) | | +--------+ +--------+ | | `-->| lo |-` | eth0 |<-` | | | lo | | eth0 | | +---------+--|---^-+---+-----|--+---------+ +-+--------+---+-^------+-+ | | | | Kernel | | | | +----+-------v---+-----------v----------------------------------+---+----+ | | TCP | | | | | | | +--------------------------------------------------------------+ | | | | +--------------+ | | | smc loopback | | +---------------------------+--------------+-----------------------------+ loopback-ism device creates DMBs (shared memory) for each connection peer. Since data transfer occurs within the same kernel, the sndbuf of each peer is only a descriptor and point to the same memory region as peer DMB, so that the data copy from sndbuf to peer DMB can be avoided in loopback-ism case. Container 1 (ns1) Container 2 (ns2) +-----------------------------------------+ +-------------------------+ | +-------+ | | +-------+ | | | App C |-----+ | | | App D | | | +-------+ | | | +-^-----+ | | | | | | | | (2) | | | (2') | | | | | | | | +---------------|-------------------------+ +----------|--------------+ | | Kernel | | +---------------|-----------------------------------------|--------------+ | +--------+ +--v-----+ +--------+ +--------+ | | |dmb_desc| |snd_desc| |dmb_desc| |snd_desc| | | +-----|--+ +--|-----+ +-----|--+ +--------+ | | +-----|--+ | +-----|--+ | | | DMB C | +---------------------------------| DMB D | | | +--------+ +--------+ | | | | +--------------+ | | | smc loopback | | +---------------------------+--------------+-----------------------------+ - Benchmark Test * Test environments: - VM with Intel Xeon Platinum 8 core 2.50GHz, 16 GiB mem. - SMC sndbuf/DMB size 1MB. * Test object: - TCP: run on TCP loopback. - SMC lo: run on SMC loopback-ism. 1. ipc-benchmark (see [3]) - ./<foo> -c 1000000 -s 100 TCP SMC-lo Message rate (msg/s) 84991 151293(+78.01%) 2. sockperf - serv: <smc_run> sockperf sr --tcp - clnt: <smc_run> sockperf { tp | pp } --tcp --msg-size={ 64000 for tp | 14 for pp } -i 127.0.0.1 -t 30 TCP SMC-lo Bandwidth(MBps) 5033.569 7987.732(+58.69%) Latency(us) 5.986 3.398(-43.23%) 3. nginx/wrk - serv: <smc_run> nginx - clnt: <smc_run> wrk -t 8 -c 1000 -d 30 http://127.0.0.1:80 TCP SMC-lo Requests/s 187951.76 267107.90(+42.12%) 4. redis-benchmark - serv: <smc_run> redis-server - clnt: <smc_run> redis-benchmark -h 127.0.0.1 -q -t set,get -n 400000 -c 200 -d 1024 TCP SMC-lo GET(Requests/s) 86132.64 118133.49(+37.15%) SET(Requests/s) 87374.40 122887.86(+40.65%) Change log: v7->v6 - Patch #2: minor: remove unnecessary 'return' of inline smc_loopback_exit(). - Patch #10: minor: directly return 0 instead of 'rc' in smcd_cdc_msg_send(). - all: collect the Reviewed-by tags. v6->RFC v5 Link: https://lore.kernel.org/netdev/20240414040304.54255-1-guwen@linux.alibaba.com/ - Patch #2: make the use of CONFIG_SMC_LO cleaner. - Patch #5: mark some smcd_ops that loopback-ism doesn't support as optional and check for the support when they are called. - Patch #7: keep loopback-ism at the beginning of the SMC-D device list. - Some expression changes in commit logs and comments. RFC v5->RFC v4: Link: https://lore.kernel.org/netdev/20240324135522.108564-1-guwen@linux.alibaba.com/ - Patch #2: minor changes in description of config SMC_LO and comments. - Patch #10: minor changes in comments and if(smc_ism_support_dmb_nocopy()) check in smcd_cdc_msg_send(). - Patch #3: change smc_lo_generate_id() to smc_lo_generate_ids() and SMC_LO_CHID to SMC_LO_RESERVED_CHID. - Patch #5: memcpy while holding the ldev->dmb_ht_lock. - Some expression changes in commit logs. RFC v4->v3: Link: https://lore.kernel.org/netdev/20240317100545.96663-1-guwen@linux.alibaba.com/ - The merge window of v6.9 is open, so post this series as an RFC. - Patch #6: since some information fed back by smc_nl_handle_smcd_dev() dose not apply to Emulated-ISM (including loopback-ism here), loopback-ism is not exposed through smc netlink for the time being. we may refactor this part when smc netlink interface is updated. v3->v2: Link: https://lore.kernel.org/netdev/20240312142743.41406-1-guwen@linux.alibaba.com/ - Patch #11: use tasklet_schedule(&conn->rx_tsklet) instead of smcd_cdc_rx_handler() to avoid possible recursive locking of conn->send_lock and use {read|write}_lock_bh() to acquire dmb_ht_lock. v2->v1: Link: https://lore.kernel.org/netdev/20240307095536.29648-1-guwen@linux.alibaba.com/ - All the patches: changed the term virtual-ISM to Emulated-ISM as defined by SMCv2.1. - Patch #3: optimized the description of SMC_LO config. Avoid exposing loopback-ism to sysfs and remove all the knobs until future definition clear. - Patch #3: try to make lockdep happy by using read_lock_bh() in smc_lo_move_data(). - Patch #6: defaultly use physical contiguous DMB buffers. - Patch #11: defaultly enable DMB no-copy for loopback-ism and free the DMB in unregister_dmb or detach_dmb when dmb_node->refcnt reaches 0, instead of using wait_event to keep waiting in unregister_dmb. v1->RFC: Link: https://lore.kernel.org/netdev/20240111120036.109903-1-guwen@linux.alibaba.com/ - Patch #9: merge rx_bytes and tx_bytes as xfer_bytes statistics: /sys/devices/virtual/smc/loopback-ism/xfer_bytes - Patch #10: add support_dmb_nocopy operation to check if SMC-D device supports merging sndbuf with peer DMB. - Patch #13 & #14: introduce loopback-ism device control of DMB memory type and control of whether to merge sndbuf and DMB. They can be respectively set by: /sys/devices/virtual/smc/loopback-ism/dmb_type /sys/devices/virtual/smc/loopback-ism/dmb_copy The motivation for these two control is that a performance bottleneck was found when using vzalloced DMB and sndbuf is merged with DMB, and there are many CPUs and CONFIG_HARDENED_USERCOPY is set [4]. The bottleneck is caused by the lock contention in vmap_area_lock [5] which is involved in memcpy_from_msg() or memcpy_to_msg(). Currently, Uladzislau Rezki is working on mitigating the vmap lock contention [6]. It has significant effects, but using virtual memory still has additional overhead compared to using physical memory. So this new version provides controls of dmb_type and dmb_copy to suit different scenarios. - Some minor changes and comments improvements. RFC->old version([1]): Link: https://lore.kernel.org/netdev/1702214654-32069-1-git-send-email-guwen@linux.alibaba.com/ - Patch #1: improve the loopback-ism dump, it shows as follows now: # smcd d FID Type PCI-ID PCHID InUse #LGs PNET-ID 0000 0 loopback-ism ffff No 0 - Patch #3: introduce the smc_ism_set_v2_capable() helper and set smc_ism_v2_capable when ISMv2 or virtual ISM is registered, regardless of whether there is already a device in smcd device list. - Patch #3: loopback-ism will be added into /sys/devices/virtual/smc/loopback-ism/. - Patch #8: introduce the runtime switch /sys/devices/virtual/smc/loopback-ism/active to activate or deactivate the loopback-ism. - Patch #9: introduce the statistics of loopback-ism by /sys/devices/virtual/smc/loopback-ism/{{tx|rx}_tytes|dmbs_cnt}. - Some minor changes and comments improvements. [1] https://lore.kernel.org/netdev/1695568613-125057-1-git-send-email-guwen@linux.alibaba.com/ [2] https://lore.kernel.org/netdev/20231219142616.80697-1-guwen@linux.alibaba.com/ [3] https://github.com/goldsborough/ipc-bench [4] https://lore.kernel.org/all/3189e342-c38f-6076-b730-19a6efd732a5@linux.alibaba.com/ [5] https://lore.kernel.org/all/238e63cd-e0e8-4fbf-852f-bc4d5bc35d5a@linux.alibaba.com/ [6] https://lore.kernel.org/all/20240102184633.748113-1-urezki@gmail.com/ ==================== Link: https://lore.kernel.org/r/20240428060738.60843-1-guwen@linux.alibaba.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

…/git/pablo/gtp Pablo neira Ayuso says: ==================== gtp pull request 24-05-07 This v3 includes: - fix for clang uninitialized variable per Jakub. - address Smatch and Coccinelle reports per Simon - remove inline in new IPv6 support per Simon - fix memleaks in netlink control plane per Simon -o- The following patchset contains IPv6 GTP driver support for net-next, this also includes IPv6 over IPv4 and vice-versa: Patch #1 removes a unnecessary stack variable initialization in the socket routine. Patch #2 deals with GTP extension headers. This variable length extension header to decapsulate packets accordingly. Otherwise, packets are dropped when these extension headers are present which breaks interoperation with other non-Linux based GTP implementations. Patch #3 prepares for IPv6 support by moving IPv4 specific fields in PDP context objects to a union. Patch #4 adds IPv6 support while retaining backward compatibility. Three new attributes allows to declare an IPv6 GTP tunnel GTPA_FAMILY, GTPA_PEER_ADDR6 and GTPA_MS_ADDR6 as well as IFLA_GTP_LOCAL6 to declare the IPv6 GTP UDP socket. Up to this patch, only IPv6 outer in IPv6 inner is supported. Patch #5 uses IPv6 address /64 prefix for UE/MS in the inner headers. Unlike IPv4, which provides a 1:1 mapping between UE/MS, IPv6 tunnel encapsulates traffic for /64 address as specified by 3GPP TS. Patch has been split from Patch #4 to highlight this behaviour. Patch #6 passes up IPv6 link-local traffic, such as IPv6 SLAAC, for handling to userspace so they are handled as control packets. Patch #7 prepares to allow for GTP IPv4 over IPv6 and vice-versa by moving IP specific debugging out of the function to build IPv4 and IPv6 GTP packets. Patch #8 generalizes TOS/DSCP handling following similar approach as in the existing iptunnel infrastructure. Patch #9 adds a helper function to build an IPv4 GTP packet in the outer header. Patch #10 adds a helper function to build an IPv6 GTP packet in the outer header. Patch #11 adds support for GTP IPv4-over-IPv6 and vice-versa. Patch #12 allows to use the same TID/TEID (tunnel identifier) for inner IPv4 and IPv6 packets for better UE/MS dual stack integration. This series integrates with the osmocom.org project CI and TTCN-3 test infrastructure (Oliver Smith) as well as the userspace libgtpnl library. Thanks to Harald Welte, Oliver Smith and Pau Espin for reviewing and providing feedback through the osmocom.org redmine platform to make this happen. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

…rnel/git/netfilter/nf-next Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: Patch #1 skips transaction if object type provides no .update interface. Patch #2 skips NETDEV_CHANGENAME which is unused. Patch #3 enables conntrack to handle Multicast Router Advertisements and Multicast Router Solicitations from the Multicast Router Discovery protocol (RFC4286) as untracked opposed to invalid packets. From Linus Luessing. Patch #4 updates DCCP conntracker to mark invalid as invalid, instead of dropping them, from Jason Xing. Patch #5 uses NF_DROP instead of -NF_DROP since NF_DROP is 0, also from Jason. Patch #6 removes reference in netfilter's sysctl documentation on pickup entries which were already removed by Florian Westphal. Patch #7 removes check for IPS_OFFLOAD flag to disable early drop which allows to evict entries from the conntrack table, also from Florian. Patches #8 to #16 updates nf_tables pipapo set backend to allocate the datastructure copy on-demand from preparation phase, to better deal with OOM situations where .commit step is too late to fail. Series from Florian Westphal. Patch #17 adds a selftest with packetdrill to cover conntrack TCP state transitions, also from Florian. Patch #18 use GFP_KERNEL to clone elements from control plane to avoid quick atomic reserves exhaustion with large sets, reporter refers to million entries magnitude. * tag 'nf-next-24-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nf_tables: allow clone callbacks to sleep selftests: netfilter: add packetdrill based conntrack tests netfilter: nft_set_pipapo: remove dirty flag netfilter: nft_set_pipapo: move cloning of match info to insert/removal path netfilter: nft_set_pipapo: prepare pipapo_get helper for on-demand clone netfilter: nft_set_pipapo: merge deactivate helper into caller netfilter: nft_set_pipapo: prepare walk function for on-demand clone netfilter: nft_set_pipapo: prepare destroy function for on-demand clone netfilter: nft_set_pipapo: make pipapo_clone helper return NULL netfilter: nft_set_pipapo: move prove_locking helper around netfilter: conntrack: remove flowtable early-drop test netfilter: conntrack: documentation: remove reference to non-existent sysctl netfilter: use NF_DROP instead of -NF_DROP netfilter: conntrack: dccp: try not to drop skb in conntrack netfilter: conntrack: fix ct-state for ICMPv6 Multicast Router Discovery netfilter: nf_tables: remove NETDEV_CHANGENAME from netdev chain event handler netfilter: nf_tables: skip transaction if update object is not implemented ==================== Link: https://lore.kernel.org/r/20240512161436.168973-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The session has a header in it which contains a perf env with bpf_progs. The bpf_progs are accessed by the sideband thread and so the sideband thread must be stopped before the session is deleted, to avoid a use after free. This error was detected by AddressSanitizer in the following: ==2054673==ERROR: AddressSanitizer: heap-use-after-free on address 0x61d000161e00 at pc 0x55769289de54 bp 0x7f9df36d4ab0 sp 0x7f9df36d4aa8 READ of size 8 at 0x61d000161e00 thread T1 #0 0x55769289de53 in __perf_env__insert_bpf_prog_info util/env.c:42 #1 0x55769289dbb1 in perf_env__insert_bpf_prog_info util/env.c:29 #2 0x557692bbae29 in perf_env__add_bpf_info util/bpf-event.c:483 #3 0x557692bbb01a in bpf_event__sb_cb util/bpf-event.c:512 #4 0x5576928b75f4 in perf_evlist__poll_thread util/sideband_evlist.c:68 #5 0x7f9df96a63eb in start_thread nptl/pthread_create.c:444 #6 0x7f9df9726a4b in clone3 ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81 0x61d000161e00 is located 384 bytes inside of 2136-byte region [0x61d000161c80,0x61d0001624d8) freed by thread T0 here: #0 0x7f9dfa6d7288 in __interceptor_free libsanitizer/asan/asan_malloc_linux.cpp:52 #1 0x557692978d50 in perf_session__delete util/session.c:319 #2 0x557692673959 in __cmd_record tools/perf/builtin-record.c:2884 #3 0x55769267a9f0 in cmd_record tools/perf/builtin-record.c:4259 #4 0x55769286710c in run_builtin tools/perf/perf.c:349 #5 0x557692867678 in handle_internal_command tools/perf/perf.c:402 #6 0x557692867a40 in run_argv tools/perf/perf.c:446 #7 0x557692867fae in main tools/perf/perf.c:562 #8 0x7f9df96456c9 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 Fixes: 657ee55 ("perf evlist: Introduce side band thread") Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Disha Goel <disgoel@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: K Prateek Nayak <kprateek.nayak@amd.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Yicong Yang <yangyicong@hisilicon.com> Link: https://lore.kernel.org/r/20240301074639.2260708-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

ui_browser__show() is capturing the input title that is stack allocated memory in hist_browser__run(). Avoid a use after return by strdup-ing the string. Committer notes: Further explanation from Ian Rogers: My command line using tui is: $ sudo bash -c 'rm /tmp/asan.log*; export ASAN_OPTIONS="log_path=/tmp/asan.log"; /tmp/perf/perf mem record -a sleep 1; /tmp/perf/perf mem report' I then go to the perf annotate view and quit. This triggers the asan error (from the log file): ``` ==1254591==ERROR: AddressSanitizer: stack-use-after-return on address 0x7f2813331920 at pc 0x7f28180 65991 bp 0x7fff0a21c750 sp 0x7fff0a21bf10 READ of size 80 at 0x7f2813331920 thread T0 #0 0x7f2818065990 in __interceptor_strlen ../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:461 #1 0x7f2817698251 in SLsmg_write_wrapped_string (/lib/x86_64-linux-gnu/libslang.so.2+0x98251) #2 0x7f28176984b9 in SLsmg_write_nstring (/lib/x86_64-linux-gnu/libslang.so.2+0x984b9) #3 0x55c94045b365 in ui_browser__write_nstring ui/browser.c:60 #4 0x55c94045c558 in __ui_browser__show_title ui/browser.c:266 #5 0x55c94045c776 in ui_browser__show ui/browser.c:288 #6 0x55c94045c06d in ui_browser__handle_resize ui/browser.c:206 #7 0x55c94047979b in do_annotate ui/browsers/hists.c:2458 #8 0x55c94047fb17 in evsel__hists_browse ui/browsers/hists.c:3412 #9 0x55c940480a0c in perf_evsel_menu__run ui/browsers/hists.c:3527 #10 0x55c940481108 in __evlist__tui_browse_hists ui/browsers/hists.c:3613 #11 0x55c9404813f7 in evlist__tui_browse_hists ui/browsers/hists.c:3661 #12 0x55c93ffa253f in report__browse_hists tools/perf/builtin-report.c:671 #13 0x55c93ffa58ca in __cmd_report tools/perf/builtin-report.c:1141 #14 0x55c93ffaf159 in cmd_report tools/perf/builtin-report.c:1805 #15 0x55c94000c05c in report_events tools/perf/builtin-mem.c:374 #16 0x55c94000d96d in cmd_mem tools/perf/builtin-mem.c:516 #17 0x55c9400e44ee in run_builtin tools/perf/perf.c:350 #18 0x55c9400e4a5a in handle_internal_command tools/perf/perf.c:403 #19 0x55c9400e4e22 in run_argv tools/perf/perf.c:447 #20 0x55c9400e53ad in main tools/perf/perf.c:561 #21 0x7f28170456c9 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 #22 0x7f2817045784 in __libc_start_main_impl ../csu/libc-start.c:360 #23 0x55c93ff544c0 in _start (/tmp/perf/perf+0x19a4c0) (BuildId: 84899b0e8c7d3a3eaa67b2eb35e3d8b2f8cd4c93) Address 0x7f2813331920 is located in stack of thread T0 at offset 32 in frame #0 0x55c94046e85e in hist_browser__run ui/browsers/hists.c:746 This frame has 1 object(s): [32, 192) 'title' (line 747) <== Memory access at offset 32 is inside this variable HINT: this may be a false positive if your program uses some custom stack unwind mechanism, swapcontext or vfork ``` hist_browser__run isn't on the stack so the asan error looks legit. There's no clean init/exit on struct ui_browser so I may be trading a use-after-return for a memory leak, but that seems look a good trade anyway. Fixes: 05e8b08 ("perf ui browser: Stop using 'self'") Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Ben Gainey <ben.gainey@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: K Prateek Nayak <kprateek.nayak@amd.com> Cc: Li Dong <lidong@vivo.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Paran Lee <p4ranlee@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sun Haiyong <sunhaiyong@loongson.cn> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Yanteng Si <siyanteng@loongson.cn> Cc: Yicong Yang <yangyicong@hisilicon.com> Link: https://lore.kernel.org/r/20240507183545.1236093-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The reader code in rb_get_reader_page() swaps a new reader page into the ring buffer by doing cmpxchg on old->list.prev->next to point it to the new page. Following that, if the operation is successful, old->list.next->prev gets updated too. This means the underlying doubly-linked list is temporarily inconsistent, page->prev->next or page->next->prev might not be equal back to page for some page in the ring buffer. The resize operation in ring_buffer_resize() can be invoked in parallel. It calls rb_check_pages() which can detect the described inconsistency and stop further tracing: [ 190.271762] ------------[ cut here ]------------ [ 190.271771] WARNING: CPU: 1 PID: 6186 at kernel/trace/ring_buffer.c:1467 rb_check_pages.isra.0+0x6a/0xa0 [ 190.271789] Modules linked in: [...] [ 190.271991] Unloaded tainted modules: intel_uncore_frequency(E):1 skx_edac(E):1 [ 190.272002] CPU: 1 PID: 6186 Comm: cmd.sh Kdump: loaded Tainted: G E 6.9.0-rc6-default #5 158d3e1e6d0b091c34c3b96bfd99a1c58306d79f [ 190.272011] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552c-rebuilt.opensuse.org 04/01/2014 [ 190.272015] RIP: 0010:rb_check_pages.isra.0+0x6a/0xa0 [ 190.272023] Code: [...] [ 190.272028] RSP: 0018:ffff9c37463abb70 EFLAGS: 00010206 [ 190.272034] RAX: ffff8eba04b6cb80 RBX: 0000000000000007 RCX: ffff8eba01f13d80 [ 190.272038] RDX: ffff8eba01f130c0 RSI: ffff8eba04b6cd00 RDI: ffff8eba0004c700 [ 190.272042] RBP: ffff8eba0004c700 R08: 0000000000010002 R09: 0000000000000000 [ 190.272045] R10: 00000000ffff7f52 R11: ffff8eba7f600000 R12: ffff8eba0004c720 [ 190.272049] R13: ffff8eba00223a00 R14: 0000000000000008 R15: ffff8eba067a8000 [ 190.272053] FS: 00007f1bd64752c0(0000) GS:ffff8eba7f680000(0000) knlGS:0000000000000000 [ 190.272057] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 190.272061] CR2: 00007f1bd6662590 CR3: 000000010291e001 CR4: 0000000000370ef0 [ 190.272070] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 190.272073] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 190.272077] Call Trace: [ 190.272098] <TASK> [ 190.272189] ring_buffer_resize+0x2ab/0x460 [ 190.272199] __tracing_resize_ring_buffer.part.0+0x23/0xa0 [ 190.272206] tracing_resize_ring_buffer+0x65/0x90 [ 190.272216] tracing_entries_write+0x74/0xc0 [ 190.272225] vfs_write+0xf5/0x420 [ 190.272248] ksys_write+0x67/0xe0 [ 190.272256] do_syscall_64+0x82/0x170 [ 190.272363] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 190.272373] RIP: 0033:0x7f1bd657d263 [ 190.272381] Code: [...] [ 190.272385] RSP: 002b:00007ffe72b643f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 190.272391] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f1bd657d263 [ 190.272395] RDX: 0000000000000002 RSI: 0000555a6eb538e0 RDI: 0000000000000001 [ 190.272398] RBP: 0000555a6eb538e0 R08: 000000000000000a R09: 0000000000000000 [ 190.272401] R10: 0000555a6eb55190 R11: 0000000000000246 R12: 00007f1bd6662500 [ 190.272404] R13: 0000000000000002 R14: 00007f1bd6667c00 R15: 0000000000000002 [ 190.272412] </TASK> [ 190.272414] ---[ end trace 0000000000000000 ]--- Note that ring_buffer_resize() calls rb_check_pages() only if the parent trace_buffer has recording disabled. Recent commit d78ab79 ("tracing: Stop current tracer when resizing buffer") causes that it is now always the case which makes it more likely to experience this issue. The window to hit this race is nonetheless very small. To help reproducing it, one can add a delay loop in rb_get_reader_page(): ret = rb_head_page_replace(reader, cpu_buffer->reader_page); if (!ret) goto spin; for (unsigned i = 0; i < 1U << 26; i++) /* inserted delay loop */ __asm__ __volatile__ ("" : : : "memory"); rb_list_head(reader->list.next)->prev = &cpu_buffer->reader_page->list; .. and then run the following commands on the target system: echo 1 > /sys/kernel/tracing/events/sched/sched_switch/enable while true; do echo 16 > /sys/kernel/tracing/buffer_size_kb; sleep 0.1 echo 8 > /sys/kernel/tracing/buffer_size_kb; sleep 0.1 done & while true; do for i in /sys/kernel/tracing/per_cpu/*; do timeout 0.1 cat $i/trace_pipe; sleep 0.2 done done To fix the problem, make sure ring_buffer_resize() doesn't invoke rb_check_pages() concurrently with a reader operating on the same ring_buffer_per_cpu by taking its cpu_buffer->reader_lock. Link: https://lore.kernel.org/linux-trace-kernel/20240517134008.24529-3-petr.pavlu@suse.com Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Fixes: 659f451 ("ring-buffer: Add integrity check at end of iter read") Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> [ Fixed whitespace ] Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 syzbot reports that nf_reinject() could be called without rcu_read_lock() when flushing pending packets at nfnetlink queue removal, from Eric Dumazet. Patch #2 flushes ipset list:set when canceling garbage collection to reference to other lists to fix a race, from Jozsef Kadlecsik. Patch #3 restores q-in-q matching with nft_payload by reverting f6ae9f1 ("netfilter: nft_payload: add C-VLAN support"). Patch #4 fixes vlan mangling in skbuff when vlan offload is present in skbuff, without this patch nft_payload corrupts packets in this case. Patch #5 fixes possible nul-deref in tproxy no IP address is found in netdevice, reported by syzbot and patch from Florian Westphal. Patch #6 removes a superfluous restriction which prevents loose fib lookups from input and forward hooks, from Eric Garver. My assessment is that patches #1, #2 and #5 address possible kernel crash, anything else in this batch fixes broken features. netfilter pull request 24-05-29 * tag 'nf-24-05-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nft_fib: allow from forward/input without iif selector netfilter: tproxy: bail out if IP has been disabled on the device netfilter: nft_payload: skbuff vlan metadata mangle support netfilter: nft_payload: restore vlan q-in-q match support netfilter: ipset: Add list flush to cancel_gc netfilter: nfnetlink_queue: acquire rcu_read_lock() in instance_destroy_rcu() ==================== Link: https://lore.kernel.org/r/20240528225519.1155786-1-pablo@netfilter.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Petr Machata says: ==================== mlxsw: ACL fixes Ido Schimmel writes: Patches #1-#3 fix various spelling mistakes I noticed while working on the code base. Patch #4 fixes a general protection fault by bailing out when the error occurs and warning. Patch #5 fixes the warning. Patch #6 fixes ACL scale regression and firmware errors. See the commit messages for more info. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

Petr Machata says: ==================== Allow configuration of multipath hash seed Let me just quote the commit message of patch #2 here to inform the motivation and some of the implementation: When calculating hashes for the purpose of multipath forwarding, both IPv4 and IPv6 code currently fall back on flow_hash_from_keys(). That uses a randomly-generated seed. That's a fine choice by default, but unfortunately some deployments may need a tighter control over the seed used. In this patchset, make the seed configurable by adding a new sysctl key, net.ipv4.fib_multipath_hash_seed to control the seed. This seed is used specifically for multipath forwarding and not for the other concerns that flow_hash_from_keys() is used for, such as queue selection. Expose the knob as sysctl because other such settings, such as headers to hash, are also handled that way. Despite being placed in the net.ipv4 namespace, the multipath seed sysctl is used for both IPv4 and IPv6, similarly to e.g. a number of TCP variables. Like those, the multipath hash seed is a per-netns variable. The seed used by flow_hash_from_keys() is a 128-bit quantity. However it seems that usually the seed is a much more modest value. 32 bits seem typical (Cisco, Cumulus), some systems go even lower. For that reason, and to decouple the user interface from implementation details, go with a 32-bit quantity, which is then quadruplicated to form the siphash key. One example of use of this interface is avoiding hash polarization, where two ECMP routers, one behind the other, happen to make consistent hashing decisions, and as a result, part of the ECMP space of the latter router is never used. Another is a load balancer where several machines forward traffic to one of a number of leaves, and the forwarding decisions need to be made consistently. (This is a case of a desired hash polarization, mentioned e.g. in chapter 6.3 of [0].) There has already been a proposal to include a hash seed control interface in the past[1]. - Patches #1-#2 contain the substance of the work - Patch #3 is an mlxsw offload - Patches #4 and #5 are a selftest [0] https://www.usenix.org/system/files/conference/nsdi18/nsdi18-araujo.pdf [1] https://lore.kernel.org/netdev/YIlVpYMCn%2F8WfE1P@rnd/ ==================== Link: https://lore.kernel.org/r/20240607151357.421181-1-petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

With commit c4cb231 ("iommu/amd: Add support for enable/disable IOPF") we are hitting below issue. This happens because in IOPF enablement path it holds spin lock with irq disable and then tries to take mutex lock. dmesg: ----- [ 0.938739] ============================= [ 0.938740] [ BUG: Invalid wait context ] [ 0.938742] 6.10.0-rc1+ #1 Not tainted [ 0.938745] ----------------------------- [ 0.938746] swapper/0/1 is trying to lock: [ 0.938748] ffffffff8c9f01d8 (&port_lock_key){....}-{3:3}, at: serial8250_console_write+0x78/0x4a0 [ 0.938767] other info that might help us debug this: [ 0.938768] context-{5:5} [ 0.938769] 7 locks held by swapper/0/1: [ 0.938772] #0: ffff888101a91310 (&group->mutex){+.+.}-{4:4}, at: bus_iommu_probe+0x70/0x160 [ 0.938790] #1: ffff888101d1f1b8 (&domain->lock){....}-{3:3}, at: amd_iommu_attach_device+0xa5/0x700 [ 0.938799] #2: ffff888101cc3d18 (&dev_data->lock){....}-{3:3}, at: amd_iommu_attach_device+0xc5/0x700 [ 0.938806] #3: ffff888100052830 (&iommu->lock){....}-{2:2}, at: amd_iommu_iopf_add_device+0x3f/0xa0 [ 0.938813] #4: ffffffff8945a340 (console_lock){+.+.}-{0:0}, at: _printk+0x48/0x50 [ 0.938822] #5: ffffffff8945a390 (console_srcu){....}-{0:0}, at: console_flush_all+0x58/0x4e0 [ 0.938867] #6: ffffffff82459f80 (console_owner){....}-{0:0}, at: console_flush_all+0x1f0/0x4e0 [ 0.938872] stack backtrace: [ 0.938874] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.10.0-rc1+ #1 [ 0.938877] Hardware name: HP HP EliteBook 745 G3/807E, BIOS N73 Ver. 01.39 04/16/2019 Fix above issue by re-arranging code in attach device path: - move device PASID/IOPF enablement outside lock in AMD IOMMU driver. This is safe as core layer holds group->mutex lock before calling iommu_ops->attach_dev. Reported-by: Borislav Petkov <bp@alien8.de> Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Reported-by: Chris Bainbridge <chris.bainbridge@gmail.com> Fixes: c4cb231 ("iommu/amd: Add support for enable/disable IOPF") Tested-by: Borislav Petkov <bp@alien8.de> Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Signed-off-by: Vasant Hegde <vasant.hegde@amd.com> Link: https://lore.kernel.org/r/20240530084801.10758-1-vasant.hegde@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de>

…PLES event" This reverts commit 7d1405c. This causes segfaults in some cases, as reported by Milian: ``` sudo /usr/bin/perf record -z --call-graph dwarf -e cycles -e raw_syscalls:sys_enter ls ... [ perf record: Woken up 3 times to write data ] malloc(): invalid next size (unsorted) Aborted ``` Backtrace with GDB + debuginfod: ``` malloc(): invalid next size (unsorted) Thread 1 "perf" received signal SIGABRT, Aborted. __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 Downloading source file /usr/src/debug/glibc/glibc/nptl/pthread_kill.c 44 return INTERNAL_SYSCALL_ERROR_P (ret) ? INTERNAL_SYSCALL_ERRNO (ret) : 0; (gdb) bt #0 __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 #1 0x00007ffff6ea8eb3 in __pthread_kill_internal (threadid=<optimized out>, signo=6) at pthread_kill.c:78 #2 0x00007ffff6e50a30 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/ raise.c:26 #3 0x00007ffff6e384c3 in __GI_abort () at abort.c:79 #4 0x00007ffff6e39354 in __libc_message_impl (fmt=fmt@entry=0x7ffff6fc22ea "%s\n") at ../sysdeps/posix/libc_fatal.c:132 #5 0x00007ffff6eb3085 in malloc_printerr (str=str@entry=0x7ffff6fc5850 "malloc(): invalid next size (unsorted)") at malloc.c:5772 #6 0x00007ffff6eb657c in _int_malloc (av=av@entry=0x7ffff6ff6ac0 <main_arena>, bytes=bytes@entry=368) at malloc.c:4081 #7 0x00007ffff6eb877e in __libc_calloc (n=<optimized out>, elem_size=<optimized out>) at malloc.c:3754 #8 0x000055555569bdb6 in perf_session.do_write_header () #9 0x00005555555a373a in __cmd_record.constprop.0 () #10 0x00005555555a6846 in cmd_record () #11 0x000055555564db7f in run_builtin () #12 0x000055555558ed77 in main () ``` Valgrind memcheck: ``` ==45136== Invalid write of size 8 ==45136== at 0x2B38A5: perf_event__synthesize_id_sample (in /usr/bin/perf) ==45136== by 0x157069: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd ==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675) ==45136== by 0x3574AB: zalloc (in /usr/bin/perf) ==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== ==45136== Syscall param write(buf) points to unaddressable byte(s) ==45136== at 0x575953D: __libc_write (write.c:26) ==45136== by 0x575953D: write (write.c:24) ==45136== by 0x35761F: ion (in /usr/bin/perf) ==45136== by 0x357778: writen (in /usr/bin/perf) ==45136== by 0x1548F7: record__write (in /usr/bin/perf) ==45136== by 0x15708A: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd ==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675) ==45136== by 0x3574AB: zalloc (in /usr/bin/perf) ==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== ----- Closes: https://lore.kernel.org/linux-perf-users/23879991.0LEYPuXRzz@milian-workstation/ Reported-by: Milian Wolff <milian.wolff@kdab.com> Tested-by: Milian Wolff <milian.wolff@kdab.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: stable@kernel.org # 6.8+ Link: https://lore.kernel.org/lkml/Zl9ksOlHJHnKM70p@x1 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

We have been seeing crashes on duplicate keys in btrfs_set_item_key_safe(): BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:2620! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs] With the following stack trace: #0 btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4) #1 btrfs_drop_extents (fs/btrfs/file.c:411:4) #2 log_one_extent (fs/btrfs/tree-log.c:4732:9) #3 btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9) #4 btrfs_log_inode (fs/btrfs/tree-log.c:6626:9) #5 btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8) #6 btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8) #7 btrfs_sync_file (fs/btrfs/file.c:1933:8) #8 vfs_fsync_range (fs/sync.c:188:9) #9 vfs_fsync (fs/sync.c:202:9) #10 do_fsync (fs/sync.c:212:9) #11 __do_sys_fdatasync (fs/sync.c:225:9) #12 __se_sys_fdatasync (fs/sync.c:223:1) #13 __x64_sys_fdatasync (fs/sync.c:223:1) #14 do_syscall_x64 (arch/x86/entry/common.c:52:14) #15 do_syscall_64 (arch/x86/entry/common.c:83:7) #16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121) So we're logging a changed extent from fsync, which is splitting an extent in the log tree. But this split part already exists in the tree, triggering the BUG(). This is the state of the log tree at the time of the crash, dumped with drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py) to get more details than btrfs_print_leaf() gives us: >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"]) leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610 leaf 33439744 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 7 transid 9 size 8192 nbytes 8473563889606862198 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 204 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417704.983333333 (2024-05-22 15:41:44) mtime 1716417704.983333333 (2024-05-22 15:41:44) otime 17592186044416.000000000 (559444-03-08 01:40:16) item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13 index 195 namelen 3 name: 193 item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 4096 ram 12288 extent compression 0 (none) item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 4096 nr 8192 item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 ... So the real problem happened earlier: notice that items 4 (4k-12k) and 5 (8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and item 5 starts at i_size. Here is the state of the filesystem tree at the time of the crash: >>> root = prog.crashed_thread().stack_trace()[2]["inode"].root >>> ret, nodes, slots = btrfs_search_slot(root, BtrfsKey(450, 0, 0)) >>> print_extent_buffer(nodes[0]) leaf 30425088 level 0 items 184 generation 9 owner 5 leaf 30425088 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da ... item 179 key (450 INODE_ITEM 0) itemoff 4907 itemsize 160 generation 7 transid 7 size 4096 nbytes 12288 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 6 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417703.220000000 (2024-05-22 15:41:43) mtime 1716417703.220000000 (2024-05-22 15:41:43) otime 1716417703.220000000 (2024-05-22 15:41:43) item 180 key (450 INODE_REF 256) itemoff 4894 itemsize 13 index 195 namelen 3 name: 193 item 181 key (450 XATTR_ITEM 1640047104) itemoff 4857 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 182 key (450 EXTENT_DATA 0) itemoff 4804 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 8192 ram 12288 extent compression 0 (none) item 183 key (450 EXTENT_DATA 8192) itemoff 4751 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 Item 5 in the log tree corresponds to item 183 in the filesystem tree, but nothing matches item 4. Furthermore, item 183 is the last item in the leaf. btrfs_log_prealloc_extents() is responsible for logging prealloc extents beyond i_size. It first truncates any previously logged prealloc extents that start beyond i_size. Then, it walks the filesystem tree and copies the prealloc extent items to the log tree. If it hits the end of a leaf, then it calls btrfs_next_leaf(), which unlocks the tree and does another search. However, while the filesystem tree is unlocked, an ordered extent completion may modify the tree. In particular, it may insert an extent item that overlaps with an extent item that was already copied to the log tree. This may manifest in several ways depending on the exact scenario, including an EEXIST error that is silently translated to a full sync, overlapping items in the log tree, or this crash. This particular crash is triggered by the following sequence of events: - Initially, the file has i_size=4k, a regular extent from 0-4k, and a prealloc extent beyond i_size from 4k-12k. The prealloc extent item is the last item in its B-tree leaf. - The file is fsync'd, which copies its inode item and both extent items to the log tree. - An xattr is set on the file, which sets the BTRFS_INODE_COPY_EVERYTHING flag. - The range 4k-8k in the file is written using direct I/O. i_size is extended to 8k, but the ordered extent is still in flight. - The file is fsync'd. Since BTRFS_INODE_COPY_EVERYTHING is set, this calls copy_inode_items_to_log(), which calls btrfs_log_prealloc_extents(). - btrfs_log_prealloc_extents() finds the 4k-12k prealloc extent in the filesystem tree. Since it starts before i_size, it skips it. Since it is the last item in its B-tree leaf, it calls btrfs_next_leaf(). - btrfs_next_leaf() unlocks the path. - The ordered extent completion runs, which converts the 4k-8k part of the prealloc extent to written and inserts the remaining prealloc part from 8k-12k. - btrfs_next_leaf() does a search and finds the new prealloc extent 8k-12k. - btrfs_log_prealloc_extents() copies the 8k-12k prealloc extent into the log tree. Note that it overlaps with the 4k-12k prealloc extent that was copied to the log tree by the first fsync. - fsync calls btrfs_log_changed_extents(), which tries to log the 4k-8k extent that was written. - This tries to drop the range 4k-8k in the log tree, which requires adjusting the start of the 4k-12k prealloc extent in the log tree to 8k. - btrfs_set_item_key_safe() sees that there is already an extent starting at 8k in the log tree and calls BUG(). Fix this by detecting when we're about to insert an overlapping file extent item in the log tree and truncating the part that would overlap. CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>

Petr Machata says: ==================== mlxsw: Handle MTU values Amit Cohen writes: The driver uses two values for maximum MTU, but neither is accurate. In addition, the value which is configured to hardware is not calculated correctly. Handle these issues and expose accurate values for minimum and maximum MTU per netdevice. Add test cases to check that the exposed values are really supported. Patch set overview: Patches #1-#3 set the driver to use accurate values for MTU Patch #4 aligns the driver to always use the same value for maximum MTU Patch #5 adds a test ==================== Link: https://lore.kernel.org/r/cover.1718275854.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Petr Machata says: ==================== mlxsw: Use page pool for Rx buffers allocation Amit Cohen writes: After using NAPI to process events from hardware, the next step is to use page pool for Rx buffers allocation, which is also enhances performance. To simplify this change, first use page pool to allocate one continuous buffer for each packet, later memory consumption can be improved by using fragmented buffers. This set significantly enhances mlxsw driver performance, CPU can handle about 370% of the packets per second it previously handled. The next planned improvement is using XDP to optimize telemetry. Patch set overview: Patches #1-#2 are small preparations for page pool usage Patch #3 initializes page pool, but do not use it Patch #4 converts the driver to use page pool for buffers allocations Patch #5 is an optimization for buffer access Patch #6 cleans up an unused structure Patch #7 uses napi_consume_skb() as part of Tx completion ==================== Link: https://lore.kernel.org/r/cover.1718709196.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The syzbot fuzzer found that the interrupt-URB completion callback in the cdc-wdm driver was taking too long, and the driver's immediate resubmission of interrupt URBs with -EPROTO status combined with the dummy-hcd emulation to cause a CPU lockup: cdc_wdm 1-1:1.0: nonzero urb status received: -71 cdc_wdm 1-1:1.0: wdm_int_callback - 0 bytes watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [syz-executor782:6625] CPU#0 Utilization every 4s during lockup: #1: 98% system, 0% softirq, 3% hardirq, 0% idle #2: 98% system, 0% softirq, 3% hardirq, 0% idle #3: 98% system, 0% softirq, 3% hardirq, 0% idle #4: 98% system, 0% softirq, 3% hardirq, 0% idle #5: 98% system, 1% softirq, 3% hardirq, 0% idle Modules linked in: irq event stamp: 73096 hardirqs last enabled at (73095): [<ffff80008037bc00>] console_emit_next_record kernel/printk/printk.c:2935 [inline] hardirqs last enabled at (73095): [<ffff80008037bc00>] console_flush_all+0x650/0xb74 kernel/printk/printk.c:2994 hardirqs last disabled at (73096): [<ffff80008af10b00>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline] hardirqs last disabled at (73096): [<ffff80008af10b00>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551 softirqs last enabled at (73048): [<ffff8000801ea530>] softirq_handle_end kernel/softirq.c:400 [inline] softirqs last enabled at (73048): [<ffff8000801ea530>] handle_softirqs+0xa60/0xc34 kernel/softirq.c:582 softirqs last disabled at (73043): [<ffff800080020de8>] __do_softirq+0x14/0x20 kernel/softirq.c:588 CPU: 0 PID: 6625 Comm: syz-executor782 Tainted: G W 6.10.0-rc2-syzkaller-g8867bbd4a056 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Testing showed that the problem did not occur if the two error messages -- the first two lines above -- were removed; apparently adding material to the kernel log takes a surprisingly large amount of time. In any case, the best approach for preventing these lockups and to avoid spamming the log with thousands of error messages per second is to ratelimit the two dev_err() calls. Therefore we replace them with dev_err_ratelimited(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Suggested-by: Greg KH <gregkh@linuxfoundation.org> Reported-and-tested-by: syzbot+5f996b83575ef4058638@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-usb/00000000000073d54b061a6a1c65@google.com/ Reported-and-tested-by: syzbot+1b2abad17596ad03dcff@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-usb/000000000000f45085061aa9b37e@google.com/ Fixes: 9908a32 ("USB: remove err() macro from usb class drivers") Link: https://lore.kernel.org/linux-usb/40dfa45b-5f21-4eef-a8c1-51a2f320e267@rowland.harvard.edu/ Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/29855215-52f5-4385-b058-91f42c2bee18@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 fixes the suspicious RCU usage warning that resulted from the recent fix for the race between namespace cleanup and gc in ipset left out checking the pernet exit phase when calling rcu_dereference_protected(), from Jozsef Kadlecsik. Patch #2 fixes incorrect input and output netdevice in SRv6 prerouting hooks, from Jianguo Wu. Patch #3 moves nf_hooks_lwtunnel sysctl toggle to the netfilter core. The connection tracking system is loaded on-demand, this ensures availability of this knob regardless. Patch #4-#5 adds selftests for SRv6 netfilter hooks also from Jianguo Wu. netfilter pull request 24-06-19 * tag 'nf-24-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: selftests: add selftest for the SRv6 End.DX6 behavior with netfilter selftests: add selftest for the SRv6 End.DX4 behavior with netfilter netfilter: move the sysctl nf_hooks_lwtunnel into the netfilter core seg6: fix parameter passing when calling NF_HOOK() in End.DX4 and End.DX6 behaviors netfilter: ipset: Fix suspicious rcu_dereference_protected() ==================== Link: https://lore.kernel.org/r/20240619170537.2846-1-pablo@netfilter.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Luis has been reporting an assert failure when freeing an inode cluster during inode inactivation for a while. The assert looks like: XFS: Assertion failed: bp->b_flags & XBF_DONE, file: fs/xfs/xfs_trans_buf.c, line: 241 ------------[ cut here ]------------ kernel BUG at fs/xfs/xfs_message.c:102! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 4 PID: 73 Comm: kworker/4:1 Not tainted 6.10.0-rc1 #4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: xfs-inodegc/loop5 xfs_inodegc_worker [xfs] RIP: 0010:assfail (fs/xfs/xfs_message.c:102) xfs RSP: 0018:ffff88810188f7f0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff88816e748250 RCX: 1ffffffff844b0e7 RDX: 0000000000000004 RSI: ffff88810188f558 RDI: ffffffffc2431fa0 RBP: 1ffff11020311f01 R08: 0000000042431f9f R09: ffffed1020311e9b R10: ffff88810188f4df R11: ffffffffac725d70 R12: ffff88817a3f4000 R13: ffff88812182f000 R14: ffff88810188f998 R15: ffffffffc2423f80 FS: 0000000000000000(0000) GS:ffff8881c8400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055fe9d0f109c CR3: 000000014426c002 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> xfs_trans_read_buf_map (fs/xfs/xfs_trans_buf.c:241 (discriminator 1)) xfs xfs_imap_to_bp (fs/xfs/xfs_trans.h:210 fs/xfs/libxfs/xfs_inode_buf.c:138) xfs xfs_inode_item_precommit (fs/xfs/xfs_inode_item.c:145) xfs xfs_trans_run_precommits (fs/xfs/xfs_trans.c:931) xfs __xfs_trans_commit (fs/xfs/xfs_trans.c:966) xfs xfs_inactive_ifree (fs/xfs/xfs_inode.c:1811) xfs xfs_inactive (fs/xfs/xfs_inode.c:2013) xfs xfs_inodegc_worker (fs/xfs/xfs_icache.c:1841 fs/xfs/xfs_icache.c:1886) xfs process_one_work (kernel/workqueue.c:3231) worker_thread (kernel/workqueue.c:3306 (discriminator 2) kernel/workqueue.c:3393 (discriminator 2)) kthread (kernel/kthread.c:389) ret_from_fork (arch/x86/kernel/process.c:147) ret_from_fork_asm (arch/x86/entry/entry_64.S:257) </TASK> And occurs when the the inode precommit handlers is attempt to look up the inode cluster buffer to attach the inode for writeback. The trail of logic that I can reconstruct is as follows. 1. the inode is clean when inodegc runs, so it is not attached to a cluster buffer when precommit runs. 2. #1 implies the inode cluster buffer may be clean and not pinned by dirty inodes when inodegc runs. 3. #2 implies that the inode cluster buffer can be reclaimed by memory pressure at any time. 4. The assert failure implies that the cluster buffer was attached to the transaction, but not marked done. It had been accessed earlier in the transaction, but not marked done. 5. #4 implies the cluster buffer has been invalidated (i.e. marked stale). 6. #5 implies that the inode cluster buffer was instantiated uninitialised in the transaction in xfs_ifree_cluster(), which only instantiates the buffers to invalidate them and never marks them as done. Given factors 1-3, this issue is highly dependent on timing and environmental factors. Hence the issue can be very difficult to reproduce in some situations, but highly reliable in others. Luis has an environment where it can be reproduced easily by g/531 but, OTOH, I've reproduced it only once in ~2000 cycles of g/531. I think the fix is to have xfs_ifree_cluster() set the XBF_DONE flag on the cluster buffers, even though they may not be initialised. The reasons why I think this is safe are: 1. A buffer cache lookup hit on a XBF_STALE buffer will clear the XBF_DONE flag. Hence all future users of the buffer know they have to re-initialise the contents before use and mark it done themselves. 2. xfs_trans_binval() sets the XFS_BLI_STALE flag, which means the buffer remains locked until the journal commit completes and the buffer is unpinned. Hence once marked XBF_STALE/XFS_BLI_STALE by xfs_ifree_cluster(), the only context that can access the freed buffer is the currently running transaction. 3. #2 implies that future buffer lookups in the currently running transaction will hit the transaction match code and not the buffer cache. Hence XBF_STALE and XFS_BLI_STALE will not be cleared unless the transaction initialises and logs the buffer with valid contents again. At which point, the buffer will be marked marked XBF_DONE again, so having XBF_DONE already set on the stale buffer is a moot point. 4. #2 also implies that any concurrent access to that cluster buffer will block waiting on the buffer lock until the inode cluster has been fully freed and is no longer an active inode cluster buffer. 5. #4 + #1 means that any future user of the disk range of that buffer will always see the range of disk blocks covered by the cluster buffer as not done, and hence must initialise the contents themselves. 6. Setting XBF_DONE in xfs_ifree_cluster() then means the unlinked inode precommit code will see a XBF_DONE buffer from the transaction match as it expects. It can then attach the stale but newly dirtied inode to the stale but newly dirtied cluster buffer without unexpected failures. The stale buffer will then sail through the journal and do the right thing with the attached stale inode during unpin. Hence the fix is just one line of extra code. The explanation of why we have to set XBF_DONE in xfs_ifree_cluster, OTOH, is long and complex.... Fixes: 82842fe ("xfs: fix AGF vs inode cluster buffer deadlock") Signed-off-by: Dave Chinner <dchinner@redhat.com> Tested-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>

The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 #1 __crash_kexec at ffffffff8c1338fa #2 panic at ffffffff8c1d69b9 #3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] #4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] #5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] #6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] #7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] #8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] #9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] #10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] #11 dio_complete at ffffffff8c2b9fa7 #12 do_blockdev_direct_IO at ffffffff8c2bc09f #13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] #14 generic_file_direct_write at ffffffff8c1dcf14 #15 __generic_file_write_iter at ffffffff8c1dd07b #16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] #17 aio_write at ffffffff8c2cc72e #18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/20240617095543.6971-1-jack@suse.cz Link: https://lkml.kernel.org/r/20240614145243.8837-1-jack@suse.cz Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Danielle Ratson says: ==================== Add ability to flash modules' firmware CMIS compliant modules such as QSFP-DD might be running a firmware that can be updated in a vendor-neutral way by exchanging messages between the host and the module as described in section 7.2.2 of revision 4.0 of the CMIS standard. According to the CMIS standard, the firmware update process is done using a CDB commands sequence. CDB (Command Data Block Message Communication) reads and writes are performed on memory map pages 9Fh-AFh according to the CMIS standard, section 8.12 of revision 4.0. Add a pair of new ethtool messages that allow: * User space to trigger firmware update of transceiver modules * The kernel to notify user space about the progress of the process The user interface is designed to be asynchronous in order to avoid RTNL being held for too long and to allow several modules to be updated simultaneously. The interface is designed with CMIS compliant modules in mind, but kept generic enough to accommodate future use cases, if these arise. The kernel interface that will implement the firmware update using CDB command will include 2 layers that will be added under ethtool: * The upper layer that will be triggered from the module layer, is cmis_ fw_update. * The lower one is cmis_cdb. In the future there might be more operations to implement using CDB commands. Therefore, the idea is to keep the cmis_cdb interface clean and the cmis_fw_update specific to the cdb commands handling it. The communication between the kernel and the driver will be done using two ethtool operations that enable reading and writing the transceiver module EEPROM. The operation ethtool_ops::get_module_eeprom_by_page, that is already implemented, will be used for reading from the EEPROM the CDB reply, e.g. reading module setting, state, etc. The operation ethtool_ops::set_module_eeprom_by_page, that is added in the current patchset, will be used for writing to the EEPROM the CDB command such as start firmware image, run firmware image, etc. Therefore in order for a driver to implement module flashing, that driver needs to implement the two functions mentioned above. Patchset overview: Patch #1-#2: Implement the EEPROM writing in mlxsw. Patch #3: Define the interface between the kernel and user space. Patch #4: Add ability to notify the flashing firmware progress. Patch #5: Veto operations during flashing. Patch #6: Add extended compliance codes. Patch #7: Add the cdb layer. Patch #8: Add the fw_update layer. Patch #9: Add ability to flash transceiver modules' firmware. v8: Patch #7: * In the ethtool_cmis_wait_for_cond() evaluate the condition once more to decide if the error code should be -ETIMEDOUT or something else. * s/netdev_err/netdev_err_once. v7: Patch #4: * Return -ENOMEM instead of PTR_ERR(attr) on ethnl_module_fw_flash_ntf_put_err(). Patch #9: * Fix Warning for not unlocking the spin_lock in the error flow on module_flash_fw_work_list_add(). * Avoid the fall-through on ethnl_sock_priv_destroy(). v6: * Squash some of the last patch to patch #5 and patch #9. Patch #3: * Add paragraph in .rst file. Patch #4: * Reserve '1' more place on SKB for NUL terminator in the error message string. * Add more prints on error flow, re-write the printing function and add ethnl_module_fw_flash_ntf_put_err(). * Change the communication method so notification will be sent in unicast instead of multicast. * Add new 'struct ethnl_module_fw_flash_ntf_params' that holds the relevant info for unicast communication and use it to send notification to the specific socket. * s/nla_put_u64_64bit/nla_put_uint/ Patch #7: * In ethtool_cmis_cdb_init(), Use 'const' for the 'params' parameter. Patch #8: * Add a list field to struct ethtool_module_fw_flash for module_fw_flash_work_list that will be presented in the next patch. * Move ethtool_cmis_fw_update() cleaning to a new function that will be represented in the next patch. * Move some of the fields in struct ethtool_module_fw_flash to a separate struct, so ethtool_cmis_fw_update() will get only the relevant parameters for it. * Edit the relevant functions to get the relevant params for them. * s/CMIS_MODULE_READY_MAX_DURATION_USEC/CMIS_MODULE_READY_MAX_DURATION_MSEC Patch #9: * Add a paragraph in the commit message. * Rename labels in module_flash_fw_schedule(). * Add info to genl_sk_priv_*() and implement the relevant callbacks, in order to handle properly a scenario of closing the socket from user space before the work item was ended. * Add a list the holds all the ethtool_module_fw_flash struct that corresponds to the in progress work items. * Add a new enum for the socket types. * Use both above to identify a flashing socket, add it to the list and when closing socket affect only the flashing type. * Create a new function that will get the work item instead of ethtool_cmis_fw_update(). * Edit the relevant functions to get the relevant params for them. * The new function will call the old ethtool_cmis_fw_update(), and do the cleaning, so the existence of the list should be completely isolated in module.c. =================== Signed-off-by: David S. Miller <davem@davemloft.net>

…play During inode logging (and log replay too), we are holding a transaction handle and we often need to call btrfs_iget(), which will read an inode from its subvolume btree if it's not loaded in memory and that results in allocating an inode with GFP_KERNEL semantics at the btrfs_alloc_inode() callback - and this may recurse into the filesystem in case we are under memory pressure and attempt to commit the current transaction, resulting in a deadlock since the logging (or log replay) task is holding a transaction handle open. Syzbot reported this with the following stack traces: WARNING: possible circular locking dependency detected 6.10.0-rc2-syzkaller-00361-g061d1af7b030 #0 Not tainted ------------------------------------------------------ syz-executor.1/9919 is trying to acquire lock: ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: might_alloc include/linux/sched/mm.h:334 [inline] ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: slab_pre_alloc_hook mm/slub.c:3891 [inline] ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: slab_alloc_node mm/slub.c:3981 [inline] ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: kmem_cache_alloc_lru_noprof+0x58/0x2f0 mm/slub.c:4020 but task is already holding lock: ffff88804b569358 (&ei->log_mutex){+.+.}-{3:3}, at: btrfs_log_inode+0x39c/0x4660 fs/btrfs/tree-log.c:6481 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&ei->log_mutex){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:608 [inline] __mutex_lock+0x175/0x9c0 kernel/locking/mutex.c:752 btrfs_log_inode+0x39c/0x4660 fs/btrfs/tree-log.c:6481 btrfs_log_inode_parent+0x8cb/0x2a90 fs/btrfs/tree-log.c:7079 btrfs_log_dentry_safe+0x59/0x80 fs/btrfs/tree-log.c:7180 btrfs_sync_file+0x9c1/0xe10 fs/btrfs/file.c:1959 vfs_fsync_range+0x141/0x230 fs/sync.c:188 generic_write_sync include/linux/fs.h:2794 [inline] btrfs_do_write_iter+0x584/0x10c0 fs/btrfs/file.c:1705 new_sync_write fs/read_write.c:497 [inline] vfs_write+0x6b6/0x1140 fs/read_write.c:590 ksys_write+0x12f/0x260 fs/read_write.c:643 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e -> #2 (btrfs_trans_num_extwriters){++++}-{0:0}: join_transaction+0x164/0xf40 fs/btrfs/transaction.c:315 start_transaction+0x427/0x1a70 fs/btrfs/transaction.c:700 btrfs_commit_super+0xa1/0x110 fs/btrfs/disk-io.c:4170 close_ctree+0xcb0/0xf90 fs/btrfs/disk-io.c:4324 generic_shutdown_super+0x159/0x3d0 fs/super.c:642 kill_anon_super+0x3a/0x60 fs/super.c:1226 btrfs_kill_super+0x3b/0x50 fs/btrfs/super.c:2096 deactivate_locked_super+0xbe/0x1a0 fs/super.c:473 deactivate_super+0xde/0x100 fs/super.c:506 cleanup_mnt+0x222/0x450 fs/namespace.c:1267 task_work_run+0x14e/0x250 kernel/task_work.c:180 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop kernel/entry/common.c:114 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x278/0x2a0 kernel/entry/common.c:218 __do_fast_syscall_32+0x80/0x120 arch/x86/entry/common.c:389 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e -> #1 (btrfs_trans_num_writers){++++}-{0:0}: __lock_release kernel/locking/lockdep.c:5468 [inline] lock_release+0x33e/0x6c0 kernel/locking/lockdep.c:5774 percpu_up_read include/linux/percpu-rwsem.h:99 [inline] __sb_end_write include/linux/fs.h:1650 [inline] sb_end_intwrite include/linux/fs.h:1767 [inline] __btrfs_end_transaction+0x5ca/0x920 fs/btrfs/transaction.c:1071 btrfs_commit_inode_delayed_inode+0x228/0x330 fs/btrfs/delayed-inode.c:1301 btrfs_evict_inode+0x960/0xe80 fs/btrfs/inode.c:5291 evict+0x2ed/0x6c0 fs/inode.c:667 iput_final fs/inode.c:1741 [inline] iput.part.0+0x5a8/0x7f0 fs/inode.c:1767 iput+0x5c/0x80 fs/inode.c:1757 dentry_unlink_inode+0x295/0x480 fs/dcache.c:400 __dentry_kill+0x1d0/0x600 fs/dcache.c:603 dput.part.0+0x4b1/0x9b0 fs/dcache.c:845 dput+0x1f/0x30 fs/dcache.c:835 ovl_stack_put+0x60/0x90 fs/overlayfs/util.c:132 ovl_destroy_inode+0xc6/0x190 fs/overlayfs/super.c:182 destroy_inode+0xc4/0x1b0 fs/inode.c:311 iput_final fs/inode.c:1741 [inline] iput.part.0+0x5a8/0x7f0 fs/inode.c:1767 iput+0x5c/0x80 fs/inode.c:1757 dentry_unlink_inode+0x295/0x480 fs/dcache.c:400 __dentry_kill+0x1d0/0x600 fs/dcache.c:603 shrink_kill fs/dcache.c:1048 [inline] shrink_dentry_list+0x140/0x5d0 fs/dcache.c:1075 prune_dcache_sb+0xeb/0x150 fs/dcache.c:1156 super_cache_scan+0x32a/0x550 fs/super.c:221 do_shrink_slab+0x44f/0x11c0 mm/shrinker.c:435 shrink_slab_memcg mm/shrinker.c:548 [inline] shrink_slab+0xa87/0x1310 mm/shrinker.c:626 shrink_one+0x493/0x7c0 mm/vmscan.c:4790 shrink_many mm/vmscan.c:4851 [inline] lru_gen_shrink_node+0x89f/0x1750 mm/vmscan.c:4951 shrink_node mm/vmscan.c:5910 [inline] kswapd_shrink_node mm/vmscan.c:6720 [inline] balance_pgdat+0x1105/0x1970 mm/vmscan.c:6911 kswapd+0x5ea/0xbf0 mm/vmscan.c:7180 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 -> #0 (fs_reclaim){+.+.}-{0:0}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain kernel/locking/lockdep.c:3869 [inline] __lock_acquire+0x2478/0x3b30 kernel/locking/lockdep.c:5137 lock_acquire kernel/locking/lockdep.c:5754 [inline] lock_acquire+0x1b1/0x560 kernel/locking/lockdep.c:5719 __fs_reclaim_acquire mm/page_alloc.c:3801 [inline] fs_reclaim_acquire+0x102/0x160 mm/page_alloc.c:3815 might_alloc include/linux/sched/mm.h:334 [inline] slab_pre_alloc_hook mm/slub.c:3891 [inline] slab_alloc_node mm/slub.c:3981 [inline] kmem_cache_alloc_lru_noprof+0x58/0x2f0 mm/slub.c:4020 btrfs_alloc_inode+0x118/0xb20 fs/btrfs/inode.c:8411 alloc_inode+0x5d/0x230 fs/inode.c:261 iget5_locked fs/inode.c:1235 [inline] iget5_locked+0x1c9/0x2c0 fs/inode.c:1228 btrfs_iget_locked fs/btrfs/inode.c:5590 [inline] btrfs_iget_path fs/btrfs/inode.c:5607 [inline] btrfs_iget+0xfb/0x230 fs/btrfs/inode.c:5636 add_conflicting_inode fs/btrfs/tree-log.c:5657 [inline] copy_inode_items_to_log+0x1039/0x1e30 fs/btrfs/tree-log.c:5928 btrfs_log_inode+0xa48/0x4660 fs/btrfs/tree-log.c:6592 log_new_delayed_dentries fs/btrfs/tree-log.c:6363 [inline] btrfs_log_inode+0x27dd/0x4660 fs/btrfs/tree-log.c:6718 btrfs_log_all_parents fs/btrfs/tree-log.c:6833 [inline] btrfs_log_inode_parent+0x22ba/0x2a90 fs/btrfs/tree-log.c:7141 btrfs_log_dentry_safe+0x59/0x80 fs/btrfs/tree-log.c:7180 btrfs_sync_file+0x9c1/0xe10 fs/btrfs/file.c:1959 vfs_fsync_range+0x141/0x230 fs/sync.c:188 generic_write_sync include/linux/fs.h:2794 [inline] btrfs_do_write_iter+0x584/0x10c0 fs/btrfs/file.c:1705 do_iter_readv_writev+0x504/0x780 fs/read_write.c:741 vfs_writev+0x36f/0xde0 fs/read_write.c:971 do_pwritev+0x1b2/0x260 fs/read_write.c:1072 __do_compat_sys_pwritev2 fs/read_write.c:1218 [inline] __se_compat_sys_pwritev2 fs/read_write.c:1210 [inline] __ia32_compat_sys_pwritev2+0x121/0x1b0 fs/read_write.c:1210 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e other info that might help us debug this: Chain exists of: fs_reclaim --> btrfs_trans_num_extwriters --> &ei->log_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ei->log_mutex); lock(btrfs_trans_num_extwriters); lock(&ei->log_mutex); lock(fs_reclaim); *** DEADLOCK *** 7 locks held by syz-executor.1/9919: #0: ffff88802be20420 (sb_writers#23){.+.+}-{0:0}, at: do_pwritev+0x1b2/0x260 fs/read_write.c:1072 #1: ffff888065c0f8f0 (&sb->s_type->i_mutex_key#33){++++}-{3:3}, at: inode_lock include/linux/fs.h:791 [inline] #1: ffff888065c0f8f0 (&sb->s_type->i_mutex_key#33){++++}-{3:3}, at: btrfs_inode_lock+0xc8/0x110 fs/btrfs/inode.c:385 #2: ffff888065c0f778 (&ei->i_mmap_lock){++++}-{3:3}, at: btrfs_inode_lock+0xee/0x110 fs/btrfs/inode.c:388 #3: ffff88802be20610 (sb_internal#4){.+.+}-{0:0}, at: btrfs_sync_file+0x95b/0xe10 fs/btrfs/file.c:1952 #4: ffff8880546323f0 (btrfs_trans_num_writers){++++}-{0:0}, at: join_transaction+0x430/0xf40 fs/btrfs/transaction.c:290 #5: ffff888054632418 (btrfs_trans_num_extwriters){++++}-{0:0}, at: join_transaction+0x430/0xf40 fs/btrfs/transaction.c:290 #6: ffff88804b569358 (&ei->log_mutex){+.+.}-{3:3}, at: btrfs_log_inode+0x39c/0x4660 fs/btrfs/tree-log.c:6481 stack backtrace: CPU: 2 PID: 9919 Comm: syz-executor.1 Not tainted 6.10.0-rc2-syzkaller-00361-g061d1af7b030 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114 check_noncircular+0x31a/0x400 kernel/locking/lockdep.c:2187 check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain kernel/locking/lockdep.c:3869 [inline] __lock_acquire+0x2478/0x3b30 kernel/locking/lockdep.c:5137 lock_acquire kernel/locking/lockdep.c:5754 [inline] lock_acquire+0x1b1/0x560 kernel/locking/lockdep.c:5719 __fs_reclaim_acquire mm/page_alloc.c:3801 [inline] fs_reclaim_acquire+0x102/0x160 mm/page_alloc.c:3815 might_alloc include/linux/sched/mm.h:334 [inline] slab_pre_alloc_hook mm/slub.c:3891 [inline] slab_alloc_node mm/slub.c:3981 [inline] kmem_cache_alloc_lru_noprof+0x58/0x2f0 mm/slub.c:4020 btrfs_alloc_inode+0x118/0xb20 fs/btrfs/inode.c:8411 alloc_inode+0x5d/0x230 fs/inode.c:261 iget5_locked fs/inode.c:1235 [inline] iget5_locked+0x1c9/0x2c0 fs/inode.c:1228 btrfs_iget_locked fs/btrfs/inode.c:5590 [inline] btrfs_iget_path fs/btrfs/inode.c:5607 [inline] btrfs_iget+0xfb/0x230 fs/btrfs/inode.c:5636 add_conflicting_inode fs/btrfs/tree-log.c:5657 [inline] copy_inode_items_to_log+0x1039/0x1e30 fs/btrfs/tree-log.c:5928 btrfs_log_inode+0xa48/0x4660 fs/btrfs/tree-log.c:6592 log_new_delayed_dentries fs/btrfs/tree-log.c:6363 [inline] btrfs_log_inode+0x27dd/0x4660 fs/btrfs/tree-log.c:6718 btrfs_log_all_parents fs/btrfs/tree-log.c:6833 [inline] btrfs_log_inode_parent+0x22ba/0x2a90 fs/btrfs/tree-log.c:7141 btrfs_log_dentry_safe+0x59/0x80 fs/btrfs/tree-log.c:7180 btrfs_sync_file+0x9c1/0xe10 fs/btrfs/file.c:1959 vfs_fsync_range+0x141/0x230 fs/sync.c:188 generic_write_sync include/linux/fs.h:2794 [inline] btrfs_do_write_iter+0x584/0x10c0 fs/btrfs/file.c:1705 do_iter_readv_writev+0x504/0x780 fs/read_write.c:741 vfs_writev+0x36f/0xde0 fs/read_write.c:971 do_pwritev+0x1b2/0x260 fs/read_write.c:1072 __do_compat_sys_pwritev2 fs/read_write.c:1218 [inline] __se_compat_sys_pwritev2 fs/read_write.c:1210 [inline] __ia32_compat_sys_pwritev2+0x121/0x1b0 fs/read_write.c:1210 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e RIP: 0023:0xf7334579 Code: b8 01 10 06 03 (...) RSP: 002b:00000000f5f265ac EFLAGS: 00000292 ORIG_RAX: 000000000000017b RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00000000200002c0 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000292 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Fix this by ensuring we are under a NOFS scope whenever we call btrfs_iget() during inode logging and log replay. Reported-by: syzbot+8576cfa84070dce4d59b@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/000000000000274a3a061abbd928@google.com/ Fixes: 712e36c ("btrfs: use GFP_KERNEL in btrfs_alloc_inode") Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

… __netif_rx() The following is emitted when using idxd (DSA) dmanegine as the data mover for ntb_transport that ntb_netdev uses. [74412.546922] BUG: using smp_processor_id() in preemptible [00000000] code: irq/52-idxd-por/14526 [74412.556784] caller is netif_rx_internal+0x42/0x130 [74412.562282] CPU: 6 PID: 14526 Comm: irq/52-idxd-por Not tainted 6.9.5 #5 [74412.569870] Hardware name: Intel Corporation ArcherCity/ArcherCity, BIOS EGSDCRB1.E9I.1752.P05.2402080856 02/08/2024 [74412.581699] Call Trace: [74412.584514] <TASK> [74412.586933] dump_stack_lvl+0x55/0x70 [74412.591129] check_preemption_disabled+0xc8/0xf0 [74412.596374] netif_rx_internal+0x42/0x130 [74412.600957] __netif_rx+0x20/0xd0 [74412.604743] ntb_netdev_rx_handler+0x66/0x150 [ntb_netdev] [74412.610985] ntb_complete_rxc+0xed/0x140 [ntb_transport] [74412.617010] ntb_rx_copy_callback+0x53/0x80 [ntb_transport] [74412.623332] idxd_dma_complete_txd+0xe3/0x160 [idxd] [74412.628963] idxd_wq_thread+0x1a6/0x2b0 [idxd] [74412.634046] irq_thread_fn+0x21/0x60 [74412.638134] ? irq_thread+0xa8/0x290 [74412.642218] irq_thread+0x1a0/0x290 [74412.646212] ? __pfx_irq_thread_fn+0x10/0x10 [74412.651071] ? __pfx_irq_thread_dtor+0x10/0x10 [74412.656117] ? __pfx_irq_thread+0x10/0x10 [74412.660686] kthread+0x100/0x130 [74412.664384] ? __pfx_kthread+0x10/0x10 [74412.668639] ret_from_fork+0x31/0x50 [74412.672716] ? __pfx_kthread+0x10/0x10 [74412.676978] ret_from_fork_asm+0x1a/0x30 [74412.681457] </TASK> The cause is due to the idxd driver interrupt completion handler uses threaded interrupt and the threaded handler is not hard or soft interrupt context. However __netif_rx() can only be called from interrupt context. Change the call to netif_rx() in order to allow completion via normal context for dmaengine drivers that utilize threaded irq handling. While the following commit changed from netif_rx() to __netif_rx(), baebdf4 ("net: dev: Makes sure netif_rx() can be invoked in any context."), the change should've been a noop instead. However, the code precedes this fix should've been using netif_rx_ni() or netif_rx_any_context(). Fixes: 548c237 ("net: Add support for NTB virtual ethernet device") Reported-by: Jerry Dai <jerry.dai@intel.com> Tested-by: Jerry Dai <jerry.dai@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://patch.msgid.link/20240701181538.3799546-1-dave.jiang@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Since f663a03 ("bpf, x64: Remove tail call detection"), tail_call_reachable won't be detected in x86 JIT. And, tail_call_reachable is provided by verifier. Therefore, in test_bpf, the tail_call_reachable must be provided in test cases before running. Fix and test: [ 174.828662] test_bpf: #0 Tail call leaf jited:1 170 PASS [ 174.829574] test_bpf: #1 Tail call 2 jited:1 244 PASS [ 174.830363] test_bpf: #2 Tail call 3 jited:1 296 PASS [ 174.830924] test_bpf: #3 Tail call 4 jited:1 719 PASS [ 174.831863] test_bpf: #4 Tail call load/store leaf jited:1 197 PASS [ 174.832240] test_bpf: #5 Tail call load/store jited:1 326 PASS [ 174.832240] test_bpf: #6 Tail call error path, max count reached jited:1 2214 PASS [ 174.835713] test_bpf: #7 Tail call count preserved across function calls jited:1 609751 PASS [ 175.446098] test_bpf: #8 Tail call error path, NULL target jited:1 472 PASS [ 175.447597] test_bpf: #9 Tail call error path, index out of range jited:1 206 PASS [ 175.448833] test_bpf: test_tail_calls: Summary: 10 PASSED, 0 FAILED, [10/10 JIT'ed] Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202406251415.c51865bc-oliver.sang@intel.com Fixes: f663a03 ("bpf, x64: Remove tail call detection") Signed-off-by: Leon Hwang <hffilwlqm@gmail.com> Link: https://lore.kernel.org/r/20240625145351.40072-1-hffilwlqm@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>

When l2tp tunnels use a socket provided by userspace, we can hit lockdep splats like the below when data is transmitted through another (unrelated) userspace socket which then gets routed over l2tp. This issue was previously discussed here: https://lore.kernel.org/netdev/87sfialu2n.fsf@cloudflare.com/ The solution is to have lockdep treat socket locks of l2tp tunnel sockets separately than those of standard INET sockets. To do so, use a different lockdep subclass where lock nesting is possible. ============================================ WARNING: possible recursive locking detected 6.10.0+ torvalds#34 Not tainted -------------------------------------------- iperf3/771 is trying to acquire lock: ffff8881027601d8 (slock-AF_INET/1){+.-.}-{2:2}, at: l2tp_xmit_skb+0x243/0x9d0 but task is already holding lock: ffff888102650d98 (slock-AF_INET/1){+.-.}-{2:2}, at: tcp_v4_rcv+0x1848/0x1e10 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(slock-AF_INET/1); lock(slock-AF_INET/1); *** DEADLOCK *** May be due to missing lock nesting notation 10 locks held by iperf3/771: #0: ffff888102650258 (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendmsg+0x1a/0x40 #1: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x4b/0xbc0 #2: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x17a/0x1130 #3: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: process_backlog+0x28b/0x9f0 #4: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_local_deliver_finish+0xf9/0x260 #5: ffff888102650d98 (slock-AF_INET/1){+.-.}-{2:2}, at: tcp_v4_rcv+0x1848/0x1e10 #6: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x4b/0xbc0 #7: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x17a/0x1130 #8: ffffffff822ac1e0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0xcc/0x1450 #9: ffff888101f33258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock#2){+...}-{2:2}, at: __dev_queue_xmit+0x513/0x1450 stack backtrace: CPU: 2 UID: 0 PID: 771 Comm: iperf3 Not tainted 6.10.0+ torvalds#34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x69/0xa0 dump_stack+0xc/0x20 __lock_acquire+0x135d/0x2600 ? srso_alias_return_thunk+0x5/0xfbef5 lock_acquire+0xc4/0x2a0 ? l2tp_xmit_skb+0x243/0x9d0 ? __skb_checksum+0xa3/0x540 _raw_spin_lock_nested+0x35/0x50 ? l2tp_xmit_skb+0x243/0x9d0 l2tp_xmit_skb+0x243/0x9d0 l2tp_eth_dev_xmit+0x3c/0xc0 dev_hard_start_xmit+0x11e/0x420 sch_direct_xmit+0xc3/0x640 __dev_queue_xmit+0x61c/0x1450 ? ip_finish_output2+0xf4c/0x1130 ip_finish_output2+0x6b6/0x1130 ? srso_alias_return_thunk+0x5/0xfbef5 ? __ip_finish_output+0x217/0x380 ? srso_alias_return_thunk+0x5/0xfbef5 __ip_finish_output+0x217/0x380 ip_output+0x99/0x120 __ip_queue_xmit+0xae4/0xbc0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? tcp_options_write.constprop.0+0xcb/0x3e0 ip_queue_xmit+0x34/0x40 __tcp_transmit_skb+0x1625/0x1890 __tcp_send_ack+0x1b8/0x340 tcp_send_ack+0x23/0x30 __tcp_ack_snd_check+0xa8/0x530 ? srso_alias_return_thunk+0x5/0xfbef5 tcp_rcv_established+0x412/0xd70 tcp_v4_do_rcv+0x299/0x420 tcp_v4_rcv+0x1991/0x1e10 ip_protocol_deliver_rcu+0x50/0x220 ip_local_deliver_finish+0x158/0x260 ip_local_deliver+0xc8/0xe0 ip_rcv+0xe5/0x1d0 ? __pfx_ip_rcv+0x10/0x10 __netif_receive_skb_one_core+0xce/0xe0 ? process_backlog+0x28b/0x9f0 __netif_receive_skb+0x34/0xd0 ? process_backlog+0x28b/0x9f0 process_backlog+0x2cb/0x9f0 __napi_poll.constprop.0+0x61/0x280 net_rx_action+0x332/0x670 ? srso_alias_return_thunk+0x5/0xfbef5 ? find_held_lock+0x2b/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 handle_softirqs+0xda/0x480 ? __dev_queue_xmit+0xa2c/0x1450 do_softirq+0xa1/0xd0 </IRQ> <TASK> __local_bh_enable_ip+0xc8/0xe0 ? __dev_queue_xmit+0xa2c/0x1450 __dev_queue_xmit+0xa48/0x1450 ? ip_finish_output2+0xf4c/0x1130 ip_finish_output2+0x6b6/0x1130 ? srso_alias_return_thunk+0x5/0xfbef5 ? __ip_finish_output+0x217/0x380 ? srso_alias_return_thunk+0x5/0xfbef5 __ip_finish_output+0x217/0x380 ip_output+0x99/0x120 __ip_queue_xmit+0xae4/0xbc0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? tcp_options_write.constprop.0+0xcb/0x3e0 ip_queue_xmit+0x34/0x40 __tcp_transmit_skb+0x1625/0x1890 tcp_write_xmit+0x766/0x2fb0 ? __entry_text_end+0x102ba9/0x102bad ? srso_alias_return_thunk+0x5/0xfbef5 ? __might_fault+0x74/0xc0 ? srso_alias_return_thunk+0x5/0xfbef5 __tcp_push_pending_frames+0x56/0x190 tcp_push+0x117/0x310 tcp_sendmsg_locked+0x14c1/0x1740 tcp_sendmsg+0x28/0x40 inet_sendmsg+0x5d/0x90 sock_write_iter+0x242/0x2b0 vfs_write+0x68d/0x800 ? __pfx_sock_write_iter+0x10/0x10 ksys_write+0xc8/0xf0 __x64_sys_write+0x3d/0x50 x64_sys_call+0xfaf/0x1f50 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f4d143af992 Code: c3 8b 07 85 c0 75 24 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> e9 01 cc ff ff 41 54 b8 02 00 00 0 RSP: 002b:00007ffd65032058 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f4d143af992 RDX: 0000000000000025 RSI: 00007f4d143f3bcc RDI: 0000000000000005 RBP: 00007f4d143f2b28 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4d143f3bcc R13: 0000000000000005 R14: 0000000000000000 R15: 00007ffd650323f0 </TASK> Fixes: 0b2c597 ("l2tp: close all race conditions in l2tp_tunnel_register()") Suggested-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+6acef9e0a4d1f46c83d4@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=6acef9e0a4d1f46c83d4 CC: gnault@redhat.com CC: cong.wang@bytedance.com Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: Tom Parkin <tparkin@katalix.com> Link: https://patch.msgid.link/20240806160626.1248317-1-jchapman@katalix.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Tariq Toukan says: ==================== mlx5 misc patches 2024-08-08 This patchset contains multiple enhancements from the team to the mlx5 core and Eth drivers. Patch #1 by Chris bumps a defined value to permit more devices doing TC offloads. Patch #2 by Jianbo adds an IPsec fast-path optimization to replace the slow async handling. Patches #3 and #4 by Jianbo add TC offload support for complicated rules to overcome firmware limitation. Patch #5 by Gal unifies the access macro to advertised/supported link modes. Patches #6 to #9 by Gal adds extack messages in ethtool ops to replace prints to the kernel log. Patch #10 by Cosmin switches to using 'update' verb instead of 'replace' to better reflect the operation. Patch #11 by Cosmin exposes an update connection tracking operation to replace the assumed delete+add implementaiton. ==================== Link: https://patch.msgid.link/20240808055927.2059700-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

…rnel/git/netfilter/nf-next Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following batch contains Netfilter updates for net-next: Patch #1 fix checksum calculation in nfnetlink_queue with SCTP, segment GSO packet since skb_zerocopy() does not support GSO_BY_FRAGS, from Antonio Ojea. Patch #2 extend nfnetlink_queue coverage to handle SCTP packets, from Antonio Ojea. Patch #3 uses consume_skb() instead of kfree_skb() in nfnetlink, from Donald Hunter. Patch #4 adds a dedicate commit list for sets to speed up intra-transaction lookups, from Florian Westphal. Patch #5 skips removal of element from abort path for the pipapo backend, ditching the shadow copy of this datastructure is sufficient. Patch #6 moves nf_ct_netns_get() out of nf_conncount_init() to let users of conncoiunt decide when to enable conntrack, this is needed by openvswitch, from Xin Long. Patch #7 pass context to all nft_parse_register_load() in preparation for the next patch. Patches #8 and #9 reject loads from uninitialized registers from control plane to remove register initialization from datapath. From Florian Westphal. * tag 'nf-next-24-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nf_tables: don't initialize registers in nft_do_chain() netfilter: nf_tables: allow loads only when register is initialized netfilter: nf_tables: pass context structure to nft_parse_register_load netfilter: move nf_ct_netns_get out of nf_conncount_init netfilter: nf_tables: do not remove elements if set backend implements .abort netfilter: nf_tables: store new sets in dedicated list netfilter: nfnetlink: convert kfree_skb to consume_skb selftests: netfilter: nft_queue.sh: sctp coverage netfilter: nfnetlink_queue: unbreak SCTP traffic ==================== Link: https://patch.msgid.link/20240822221939.157858-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: include xdp generic metadata definition

35cdb6a

Definition is only a proposal. There should be free place for 8B of tx timestamp. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>

mswiatko merged commit fcd1d41 into generic-metadata Aug 10, 2021

mswiatko deleted the generic-metadata-struct-definition branch August 10, 2021 08:06

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

net: include xdp generic metadata definition #5

net: include xdp generic metadata definition #5

mswiatko commented Aug 10, 2021

net: include xdp generic metadata definition #5

net: include xdp generic metadata definition #5

Conversation

mswiatko commented Aug 10, 2021