ConnectorBridgeCLI

This ConnectorBridgeCLI allows for both directly controlling blinds that support wifi-connection and controlling Uni- and Bi-direction blinds that connect to a 433MHz WiFi bridge. The following bridges are reported to work with this integration:

• CM-20 Motion Blinds bridge
• CMD-01 Motion Blinds mini-bridge
• DD7002B Connector bridge
• D1554 Connector mini-bridge
• DD7002B Brel-Home box
• D1554 Brel Home USB plug

This ConnectorBridgeCLI integration allows you to control the following brands:

• AMP Motorization
• Bliss Automation - Alta Window Fashions
• Bloc Blinds
• Brel Home
• 3 Day Blinds
• Diaz
• Dooya
• Gaviota
• Havana Shade
• Hurrican Shutters Wholesale
• Inspired Shades
• iSmartWindow
• Martec
• Motion Blinds
• Raven Rock MFG
• ScreenAway
• Smart Blinds
• Smart Home
• Uprise Smart Shades
• No Bull Blinds

Configuration

The default communication is via Multicast, but it might not work on your network. You can override with the Bridge IP address.

1. Find your bridge IP address. You might need to look at your router
2. The bridge port is set to 32100. Unlikely the default value needs to be changed
3. Retrieve the API key from the mobile app. Settings -> About -> Tap 5 times anywhere on the screen
4. Devices IDs are usually the same as set on the remote control.
5. Download the executable from Releases page

Variables

Flag	Environment Variable	Description
--host	CONNECTOR_BRIDGE_HOST	The hostname of IP address of the Connector Bridge -0
--port	CONNECTOR_BRIDGE_PORT	The port for the Connector Bridge connection. Default 32100
--apikey	CONNECTOR_BRIDGE_APIKEY	The ApiKey to authenticate with Connector Bridge
--simple-status	N/A	Return just the position as status, not the whole status
--invert	N/A	Invert the position paramenter to adjust to existing integrations

sconnector-cli <command> <device_id> --host=192.168.0.189 --apikey=<Bridge API key> --port=32100

export CONNECTOR_BRIDGE_HOST=192.168.0.189
export CONNECTOR_BRIDGE_APIKEY=<Bridge API key> 
sconnector-cli <command> <device_id>

Commands

The following commands were added on this:

Open, Close, Stop and Status

Send the command to the device

sconnector-cli open 1 --host=192.168.0.189 --apikey=<Bridge API key> 
sconnector-cli stop 1 --host=192.168.0.189 --apikey=<Bridge API key> 
sconnector-cli close 1 --host=192.168.0.189 --apikey=<Bridge API key> 
sconnector-cli status 1 --host=192.168.0.189 --apikey=<Bridge API key> 

Set Position

Send the command to set the position the device. Position must be between 0 and 100

sconnector-cli set-position 1 50 --host=192.168.0.189 --apikey=<Bridge API key> 

Server

Start a API Server to receive commands via HTTP, this is useful to integrate with other devices that do not support command line. This command has extra settings:

Flag	Environment Variable	Description
--server-port	CONNECTOR_API_SERVER_PORT	The listening port for the web server. Default 8080
--server-apikey	CONNECTOR_API_SERVER_APIKEY	The API Key to be used when requesting to the web server (Header: X-API-Key)

Running the server

export CONNECTOR_BRIDGE_HOST=192.168.0.189
export CONNECTOR_BRIDGE_APIKEY=<Bridge API key> 
sconnector-cli server --server-apikey=ControlMe!

To stop exit the server CTRL+C

Server Paths

The commands are available with simple GET /open/<device_id> /close/<device_id> /stop/<device_id> /position/<device_id>/

Sending a request to the server:

curl -H "X-API-Key: ControlMe!" http://localhost:8080/open/1

Docker

Docker images https://hub.docker.com/r/alexbacchin/sconnector-cli