Updated library to work with ESP8266 board manager version 3.0.0

airgradienthq · Jun 8, 2021 · c270cda · c270cda
1 parent 0753a4c
commit c270cda
Show file tree

Hide file tree

Showing 10 changed files with 69 additions and 61 deletions.
diff --git a/AirGradient.cpp b/AirGradient.cpp
@@ -11,7 +11,7 @@
 #include <SoftwareSerial.h>
 #include "Arduino.h"
 #include <Wire.h>
-#include <Math.h>
+#include <math.h>
 
 
 // Constructor /////////////////////////////////////////////////////////////////

diff --git a/README.md b/README.md
@@ -3,6 +3,6 @@ AirGradient Arduino Library for ESP8266 (Wemos D1 MINI)
 
 Build your own low cost air quality sensor with optional display measuring PM2.5, CO2, Temperature and Humidity. 
 
-This library makes it easy to read the sensor data from the Plantower PMS5003 PM2.5 sensor, the Senseair S8 and the SHT30/31 Temperature and Humidity sensor. Visit our blog for detailed build instructions and PCB layout.
+This library makes it easy to read the sensor data from the Plantower PMS5003 PM2.5 sensor, the Senseair S8 and the SHT30/31 Temperature and Humidity sensor. Visit our DIY section for detailed build instructions and PCB layout.
 
-https://www.airgradient.com/blog/
+https://www.airgradient.com/diy/
diff --git a/examples/C02_PM_SHT/.DS_Store b/examples/C02_PM_SHT/.DS_Store
diff --git a/examples/C02_PM_SHT_OLED_WIFI/C02_PM_SHT_OLED_WIFI.ino b/examples/C02_PM_SHT_OLED_WIFI/C02_PM_SHT_OLED_WIFI.ino
@@ -10,11 +10,11 @@ Plantower PMS5003 (Fine Particle Sensor)
 SenseAir S8 (CO2 Sensor)
 SHT30/31 (Temperature/Humidity Sensor)
 
-Dependent Libraries:
+Please install ESP8266 board manager (tested with version 3.0.0)
+
 The codes needs the following libraries installed:
-ESP8266 board with standard libraries
-WifiManager by tzar, tablatronix tested with Version 2.0.3-alpha
-ESP8266 and ESP32 OLED driver for SSD1306 displays by ThingPulse, Fabrice Weinberg tested with Version 4.1.0
+"WifiManager by tzapu, tablatronix" tested with Version 2.0.3-alpha
+"ESP8266 and ESP32 OLED driver for SSD1306 displays by ThingPulse, Fabrice Weinberg" tested with Version 4.1.0
 
 Configuration:
 Please set in the code below which sensor you are using and if you want to connect it to WiFi.
@@ -99,8 +99,9 @@ void loop(){
   Serial.println(payload);
   String POSTURL = APIROOT + "sensors/airgradient:" + String(ESP.getChipId(),HEX) + "/measures";
   Serial.println(POSTURL);
+  WiFiClient client;
   HTTPClient http;
-  http.begin(POSTURL);
+  http.begin(client, POSTURL);
   http.addHeader("content-type", "application/json");
   int httpCode = http.POST(payload);
   String response = http.getString();

diff --git a/examples/C02_SIMPLE/C02_SIMPLE.ino b/examples/C02_SIMPLE/C02_SIMPLE.ino
@@ -1,3 +1,21 @@
+/*
+This is the code for the AirGradient DIY Air Quality Sensor with an ESP8266 Microcontroller.
+
+It is a high quality sensor showing PM2.5, CO2, Temperature and Humidity on a small display and can send data over Wifi.
+
+For build instructions please visit https://www.airgradient.com/diy/
+
+Compatible with the following sensors:
+SenseAir S8 (CO2 Sensor)
+
+Please install ESP8266 board manager (tested with version 3.0.0)
+
+If you are a school or university contact us for a free trial on the AirGradient platform.
+https://www.airgradient.com/schools/
+
+MIT License
+*/
+
 #include <AirGradient.h>
 AirGradient ag = AirGradient();
 

diff --git a/examples/MHZ19_SIMPLE/MHZ19_SIMPLE.ino b/examples/MHZ19_SIMPLE/MHZ19_SIMPLE.ino
diff --git a/examples/PM2_SIMPLE/PM2_SIMPLE.ino b/examples/PM2_SIMPLE/PM2_SIMPLE.ino
@@ -1,3 +1,21 @@
+/*
+This is the code for the AirGradient DIY Air Quality Sensor with an ESP8266 Microcontroller.
+
+It is a high quality sensor showing PM2.5, CO2, Temperature and Humidity on a small display and can send data over Wifi.
+
+For build instructions please visit https://www.airgradient.com/diy/
+
+Compatible with the following sensors:
+Plantower PMS5003 (Fine Particle Sensor)
+
+Please install ESP8266 board manager (tested with version 3.0.0)
+
+If you are a school or university contact us for a free trial on the AirGradient platform.
+https://www.airgradient.com/schools/
+
+MIT License
+*/
+
 #include <AirGradient.h>
 AirGradient ag = AirGradient();
 

diff --git a/examples/SHT_SIMPLE/SHT_SIMPLE.ino b/examples/SHT_SIMPLE/SHT_SIMPLE.ino
@@ -1,3 +1,21 @@
+/*
+This is the code for the AirGradient DIY Air Quality Sensor with an ESP8266 Microcontroller.
+
+It is a high quality sensor showing PM2.5, CO2, Temperature and Humidity on a small display and can send data over Wifi.
+
+For build instructions please visit https://www.airgradient.com/diy/
+
+Compatible with the following sensors:
+SHT30/31 (Temperature/Humidity Sensor)
+
+Please install ESP8266 board manager (tested with version 3.0.0)
+
+If you are a school or university contact us for a free trial on the AirGradient platform.
+https://www.airgradient.com/schools/
+
+MIT License
+*/
+
 #include <AirGradient.h>
 AirGradient ag = AirGradient();
 

diff --git a/library.properties b/library.properties
@@ -1,5 +1,5 @@
 name=AirGradient Air Quality Sensor
-version=1.3.4
+version=1.3.5
 author=AirGradient <support@airgradient.com>
 maintainer=AirGradient <support@airgradient.com>
 sentence=ESP8266 library for an air quality sensor featuring PM2.5, CO2, Temperature and Humidity with OLED display.

diff --git a/readme.txt b/readme.txt
@@ -1,39 +1,8 @@
-This is an example C++ library for Arduino 0004+, based on one created by 
-Nicholas Zambetti for Wiring 0006+
+AirGradient Arduino Library for ESP8266 (Wemos D1 MINI)
+=====================================================================================================
 
-Installation
---------------------------------------------------------------------------------
+Build your own low cost air quality sensor with optional display measuring PM2.5, CO2, Temperature and Humidity. 
 
-To install this library, just place this entire folder as a subfolder in your
-Arduino/lib/targets/libraries folder.
-
-When installed, this library should look like:
-
-Arduino/lib/targets/libraries/Test              (this library's folder)
-Arduino/lib/targets/libraries/Test/Test.cpp     (the library implementation file)
-Arduino/lib/targets/libraries/Test/Test.h       (the library description file)
-Arduino/lib/targets/libraries/Test/keywords.txt (the syntax coloring file)
-Arduino/lib/targets/libraries/Test/examples     (the examples in the "open" menu)
-Arduino/lib/targets/libraries/Test/readme.txt   (this file)
-
-Building
---------------------------------------------------------------------------------
-
-After this library is installed, you just have to start the Arduino application.
-You may see a few warning messages as it's built.
-
-To use this library in a sketch, go to the Sketch | Import Library menu and
-select Test.  This will add a corresponding line to the top of your sketch:
-#include <Test.h>
-
-To stop using this library, delete that line from your sketch.
-
-Geeky information:
-After a successful build of this library, a new file named "Test.o" will appear
-in "Arduino/lib/targets/libraries/Test". This file is the built/compiled library
-code.
-
-If you choose to modify the code for this library (i.e. "Test.cpp" or "Test.h"),
-then you must first 'unbuild' this library by deleting the "Test.o" file. The
-new "Test.o" with your code will appear after the next press of "verify"
+This library makes it easy to read the sensor data from the Plantower PMS5003 PM2.5 sensor, the Senseair S8 and the SHT30/31 Temperature and Humidity sensor. Visit our DIY section for detailed build instructions and PCB layout.
 
+https://www.airgradient.com/diy/