Event Editor: Tab "Events" is empty

[BMuXBeats]

I've created a pattern with 4 quarter notes. Then I've recorded a CC 013 movement.
The events seem to be recorded. When I start my playback, the events will be transmitted to the dedicated output port.

But if I make a right click on the pattern and select "edit pattern in tab" in the main window the "Events" will be selected and opened with An empty content.

I can't see the fields like they're shown in the user manual on page (Figure 28: Event Editor Window)

---

OS: Linux Manjaro 22
Desktop environment :KDE-Plasma-Version: 5.17.4
Kernel: 6.1.25-1

[ahlstromcj]

Can you attach a midi clip with the offending pattern and I can check it out when I get a chance? Thanks!

On Sat, Apr 22, 2023 at 11:20 Bernie ***@***.***> wrote: I've created a pattern with 4 quarter notes. Then I've recorded a CC 013 movement. The events seem to be recorded. When I start my playback, the events will be transmitted to the dedicated output port. But if I make a right click on the pattern and select "edit pattern in tab" in the main window the "Events" will be selected and opened with An empty content. I can't see the fields like they're shown in the user manual on page (Figure 28: Event Editor Window) ------------------------------ OS: Linux Manjaro 22 Desktop environment :KDE-Plasma-Version: 5.17.4 Kernel: 6.1.25-1 — Reply to this email directly, view it on GitHub <#108>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AB45LKDWGNZJSNF7HW3BJOTXCPZLRANCNFSM6AAAAAAXH4XZ6M> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

-- Chris Ahlstrom

[BMuXBeats]

Hi Chris,
I've wrote you an e-mail, 'cause it's not possible to add an attachment here.

Best regards
Bernie

[ahlstromcj]

Thanks to seeing the Qt removeWidget() error in the console dump, I found an error in qsmainwnd.cpp where I was calling removeWidget() after deleting the widget! That might be the fix. Also tightened up the code in a couple other places there. If you want, you can:

$ ./bootstrap --full-clean
$ git fetch
$ git checkout portfix
$ ./bootstrap -er
$ make -j 8 &> make.log

And then try it again. Otherwise I can expedite the next release (0.99.4) into master later today. (There are a couple other bugs in 0.99.3 that I have found).

Good luck! Fingers crossed!

[ahlstromcj]

Oh, I left out a "git pull" command above after the checkout.

[ahlstromcj]

We're at version 0.99.8. Closing this one, reopen as necessary!