refactor: update some aria2 default conf

extra/darwin/arm64/engine/aria2.conf

@@ -19,9 +19,11 @@ rpc-listen-all=true
 # Save a control file(*.aria2) every SEC seconds.
 auto-save-interval=10
 # Enable disk cache.
-disk-cache=32M
+disk-cache=64M
 # Specify file allocation method.
 file-allocation=none
+# No file allocation is made for files whose size is smaller than SIZE
+no-file-allocation-limit=64M
 # Save error/unfinished downloads to a file specified by --save-session option every SEC seconds.
 save-session-interval=10
 
@@ -33,13 +35,25 @@ bt-detach-seed-only=true
 check-certificate=false
 # If aria2 receives "file not found" status from the remote HTTP/FTP servers NUM times
 # without getting a single byte, then force the download to fail.
-max-file-not-found=5
+max-file-not-found=10
 # Set number of tries.
-max-tries=5
+max-tries=0
+# Set the seconds to wait between retries. When SEC > 0, aria2 will retry downloads when the HTTP server returns a 503 response.
+retry-wait=10
+# Set the connect timeout in seconds to establish connection to HTTP/FTP/proxy server. After the connection is established, this option makes no effect and --timeout option is used instead.
+connect-timeout=10
+# Set timeout in seconds.
+timeout=10
 # aria2 does not split less than 2*SIZE byte range.
 min-split-size=1M
-# Send Accept: deflate, gzip request header
+# Send Accept: deflate, gzip request header.
 http-accept-gzip=true
+# Retrieve timestamp of the remote file from the remote HTTP/FTP server and if it is available, apply it to the local file.
+remote-time=true
+# Set interval in seconds to output download progress summary. Setting 0 suppresses the output.
+summary-interval=0
+# Handle quoted string in Content-Disposition header as UTF-8 instead of ISO-8859-1, for example, the filename parameter, but not the extended version filename*.
+content-disposition-default-utf8=true
 
 
 ################ BT Task ################
@@ -50,13 +64,17 @@ bt-enable-lpd=true
 # If true is given, after hash check using --check-integrity option and file is complete, continue to seed file.
 bt-hash-check-seed=true
 # Specify the maximum number of peers per torrent.
-bt-max-peers=255
+bt-max-peers=128
 # Try to download first and last pieces of each file first. This is useful for previewing files.
 bt-prioritize-piece=head
 # Removes the unselected files when download is completed in BitTorrent.
 bt-remove-unselected-file=true
 # Seed previously downloaded files without verifying piece hashes.
-bt-seed-unverified=true
+bt-seed-unverified=false
+# Set the connect timeout in seconds to establish connection to tracker. After the connection is established, this option makes no effect and --bt-tracker-timeout option is used instead.
+bt-tracker-connect-timeout=10
+# Set timeout in seconds.
+bt-tracker-timeout=10
 # Set host and port as an entry point to IPv4 DHT network.
 dht-entry-point=dht.transmissionbt.com:6881
 # Set host and port as an entry point to IPv6 DHT network.

extra/darwin/x64/engine/aria2.conf

@@ -19,9 +19,11 @@ rpc-listen-all=true
 # Save a control file(*.aria2) every SEC seconds.
 auto-save-interval=10
 # Enable disk cache.
-disk-cache=32M
+disk-cache=64M
 # Specify file allocation method.
 file-allocation=none
+# No file allocation is made for files whose size is smaller than SIZE
+no-file-allocation-limit=64M
 # Save error/unfinished downloads to a file specified by --save-session option every SEC seconds.
 save-session-interval=10
 
@@ -33,13 +35,25 @@ bt-detach-seed-only=true
 check-certificate=false
 # If aria2 receives "file not found" status from the remote HTTP/FTP servers NUM times
 # without getting a single byte, then force the download to fail.
-max-file-not-found=5
+max-file-not-found=10
 # Set number of tries.
-max-tries=5
+max-tries=0
+# Set the seconds to wait between retries. When SEC > 0, aria2 will retry downloads when the HTTP server returns a 503 response.
+retry-wait=10
+# Set the connect timeout in seconds to establish connection to HTTP/FTP/proxy server. After the connection is established, this option makes no effect and --timeout option is used instead.
+connect-timeout=10
+# Set timeout in seconds.
+timeout=10
 # aria2 does not split less than 2*SIZE byte range.
 min-split-size=1M
-# Send Accept: deflate, gzip request header
+# Send Accept: deflate, gzip request header.
 http-accept-gzip=true
+# Retrieve timestamp of the remote file from the remote HTTP/FTP server and if it is available, apply it to the local file.
+remote-time=true
+# Set interval in seconds to output download progress summary. Setting 0 suppresses the output.
+summary-interval=0
+# Handle quoted string in Content-Disposition header as UTF-8 instead of ISO-8859-1, for example, the filename parameter, but not the extended version filename*.
+content-disposition-default-utf8=true
 
 
 ################ BT Task ################
@@ -50,13 +64,17 @@ bt-enable-lpd=true
 # If true is given, after hash check using --check-integrity option and file is complete, continue to seed file.
 bt-hash-check-seed=true
 # Specify the maximum number of peers per torrent.
-bt-max-peers=255
+bt-max-peers=128
 # Try to download first and last pieces of each file first. This is useful for previewing files.
 bt-prioritize-piece=head
 # Removes the unselected files when download is completed in BitTorrent.
 bt-remove-unselected-file=true
 # Seed previously downloaded files without verifying piece hashes.
-bt-seed-unverified=true
+bt-seed-unverified=false
+# Set the connect timeout in seconds to establish connection to tracker. After the connection is established, this option makes no effect and --bt-tracker-timeout option is used instead.
+bt-tracker-connect-timeout=10
+# Set timeout in seconds.
+bt-tracker-timeout=10
 # Set host and port as an entry point to IPv4 DHT network.
 dht-entry-point=dht.transmissionbt.com:6881
 # Set host and port as an entry point to IPv6 DHT network.
@@ -70,4 +88,4 @@ enable-peer-exchange=true
 # Specify the string used during the bitorrent extended handshake for the peer's client version.
 peer-agent=Transmission/3.00
 # Specify the prefix of peer ID.
-peer-id-prefix=-TR2940-
+peer-id-prefix=-TR3000-

extra/linux/engine/aria2.conf

@@ -19,9 +19,11 @@ rpc-listen-all=true
 # Save a control file(*.aria2) every SEC seconds.
 auto-save-interval=10
 # Enable disk cache.
-disk-cache=32M
+disk-cache=64M
 # Specify file allocation method.
 file-allocation=trunc
+# No file allocation is made for files whose size is smaller than SIZE
+no-file-allocation-limit=64M
 # Save error/unfinished downloads to a file specified by --save-session option every SEC seconds.
 save-session-interval=10
 
@@ -33,13 +35,25 @@ bt-detach-seed-only=true
 check-certificate=false
 # If aria2 receives "file not found" status from the remote HTTP/FTP servers NUM times
 # without getting a single byte, then force the download to fail.
-max-file-not-found=5
+max-file-not-found=10
 # Set number of tries.
-max-tries=5
+max-tries=0
+# Set the seconds to wait between retries. When SEC > 0, aria2 will retry downloads when the HTTP server returns a 503 response.
+retry-wait=10
+# Set the connect timeout in seconds to establish connection to HTTP/FTP/proxy server. After the connection is established, this option makes no effect and --timeout option is used instead.
+connect-timeout=10
+# Set timeout in seconds.
+timeout=10
 # aria2 does not split less than 2*SIZE byte range.
 min-split-size=1M
-# Send Accept: deflate, gzip request header
+# Send Accept: deflate, gzip request header.
 http-accept-gzip=true
+# Retrieve timestamp of the remote file from the remote HTTP/FTP server and if it is available, apply it to the local file.
+remote-time=true
+# Set interval in seconds to output download progress summary. Setting 0 suppresses the output.
+summary-interval=0
+# Handle quoted string in Content-Disposition header as UTF-8 instead of ISO-8859-1, for example, the filename parameter, but not the extended version filename*.
+content-disposition-default-utf8=true
 
 
 ################ BT Task ################
@@ -50,13 +64,17 @@ bt-enable-lpd=true
 # If true is given, after hash check using --check-integrity option and file is complete, continue to seed file.
 bt-hash-check-seed=true
 # Specify the maximum number of peers per torrent.
-bt-max-peers=255
+bt-max-peers=128
 # Try to download first and last pieces of each file first. This is useful for previewing files.
 bt-prioritize-piece=head
 # Removes the unselected files when download is completed in BitTorrent.
 bt-remove-unselected-file=true
 # Seed previously downloaded files without verifying piece hashes.
-bt-seed-unverified=true
+bt-seed-unverified=false
+# Set the connect timeout in seconds to establish connection to tracker. After the connection is established, this option makes no effect and --bt-tracker-timeout option is used instead.
+bt-tracker-connect-timeout=10
+# Set timeout in seconds.
+bt-tracker-timeout=10
 # Set host and port as an entry point to IPv4 DHT network.
 dht-entry-point=dht.transmissionbt.com:6881
 # Set host and port as an entry point to IPv6 DHT network.
@@ -70,4 +88,4 @@ enable-peer-exchange=true
 # Specify the string used during the bitorrent extended handshake for the peer's client version.
 peer-agent=Transmission/3.00
 # Specify the prefix of peer ID.
-peer-id-prefix=-TR2940-
+peer-id-prefix=-TR3000-

extra/win32/ia32/engine/aria2.conf

@@ -19,9 +19,11 @@ rpc-listen-all=true
 # Save a control file(*.aria2) every SEC seconds.
 auto-save-interval=10
 # Enable disk cache.
-disk-cache=32M
+disk-cache=64M
 # Specify file allocation method.
 file-allocation=none
+# No file allocation is made for files whose size is smaller than SIZE
+no-file-allocation-limit=64M
 # Save error/unfinished downloads to a file specified by --save-session option every SEC seconds.
 save-session-interval=10
 
@@ -33,13 +35,25 @@ bt-detach-seed-only=true
 check-certificate=false
 # If aria2 receives "file not found" status from the remote HTTP/FTP servers NUM times
 # without getting a single byte, then force the download to fail.
-max-file-not-found=5
+max-file-not-found=10
 # Set number of tries.
-max-tries=5
+max-tries=0
+# Set the seconds to wait between retries. When SEC > 0, aria2 will retry downloads when the HTTP server returns a 503 response.
+retry-wait=10
+# Set the connect timeout in seconds to establish connection to HTTP/FTP/proxy server. After the connection is established, this option makes no effect and --timeout option is used instead.
+connect-timeout=10
+# Set timeout in seconds.
+timeout=10
 # aria2 does not split less than 2*SIZE byte range.
 min-split-size=1M
-# Send Accept: deflate, gzip request header
+# Send Accept: deflate, gzip request header.
 http-accept-gzip=true
+# Retrieve timestamp of the remote file from the remote HTTP/FTP server and if it is available, apply it to the local file.
+remote-time=true
+# Set interval in seconds to output download progress summary. Setting 0 suppresses the output.
+summary-interval=0
+# Handle quoted string in Content-Disposition header as UTF-8 instead of ISO-8859-1, for example, the filename parameter, but not the extended version filename*.
+content-disposition-default-utf8=true
 
 
 ################ BT Task ################
@@ -50,13 +64,17 @@ bt-enable-lpd=true
 # If true is given, after hash check using --check-integrity option and file is complete, continue to seed file.
 bt-hash-check-seed=true
 # Specify the maximum number of peers per torrent.
-bt-max-peers=255
+bt-max-peers=128
 # Try to download first and last pieces of each file first. This is useful for previewing files.
 bt-prioritize-piece=head
 # Removes the unselected files when download is completed in BitTorrent.
 bt-remove-unselected-file=true
 # Seed previously downloaded files without verifying piece hashes.
-bt-seed-unverified=true
+bt-seed-unverified=false
+# Set the connect timeout in seconds to establish connection to tracker. After the connection is established, this option makes no effect and --bt-tracker-timeout option is used instead.
+bt-tracker-connect-timeout=10
+# Set timeout in seconds.
+bt-tracker-timeout=10
 # Set host and port as an entry point to IPv4 DHT network.
 dht-entry-point=dht.transmissionbt.com:6881
 # Set host and port as an entry point to IPv6 DHT network.
@@ -70,4 +88,4 @@ enable-peer-exchange=true
 # Specify the string used during the bitorrent extended handshake for the peer's client version.
 peer-agent=Transmission/3.00
 # Specify the prefix of peer ID.
-peer-id-prefix=-TR2940-
+peer-id-prefix=-TR3000-

extra/win32/x64/engine/aria2.conf

@@ -19,9 +19,11 @@ rpc-listen-all=true
 # Save a control file(*.aria2) every SEC seconds.
 auto-save-interval=10
 # Enable disk cache.
-disk-cache=32M
+disk-cache=64M
 # Specify file allocation method.
 file-allocation=falloc
+# No file allocation is made for files whose size is smaller than SIZE
+no-file-allocation-limit=64M
 # Save error/unfinished downloads to a file specified by --save-session option every SEC seconds.
 save-session-interval=10
 
@@ -33,13 +35,25 @@ bt-detach-seed-only=true
 check-certificate=false
 # If aria2 receives "file not found" status from the remote HTTP/FTP servers NUM times
 # without getting a single byte, then force the download to fail.
-max-file-not-found=5
+max-file-not-found=10
 # Set number of tries.
-max-tries=5
+max-tries=0
+# Set the seconds to wait between retries. When SEC > 0, aria2 will retry downloads when the HTTP server returns a 503 response.
+retry-wait=10
+# Set the connect timeout in seconds to establish connection to HTTP/FTP/proxy server. After the connection is established, this option makes no effect and --timeout option is used instead.
+connect-timeout=10
+# Set timeout in seconds.
+timeout=10
 # aria2 does not split less than 2*SIZE byte range.
 min-split-size=1M
-# Send Accept: deflate, gzip request header
+# Send Accept: deflate, gzip request header.
 http-accept-gzip=true
+# Retrieve timestamp of the remote file from the remote HTTP/FTP server and if it is available, apply it to the local file.
+remote-time=true
+# Set interval in seconds to output download progress summary. Setting 0 suppresses the output.
+summary-interval=0
+# Handle quoted string in Content-Disposition header as UTF-8 instead of ISO-8859-1, for example, the filename parameter, but not the extended version filename*.
+content-disposition-default-utf8=true
 
 
 ################ BT Task ################
@@ -50,13 +64,17 @@ bt-enable-lpd=true
 # If true is given, after hash check using --check-integrity option and file is complete, continue to seed file.
 bt-hash-check-seed=true
 # Specify the maximum number of peers per torrent.
-bt-max-peers=255
+bt-max-peers=128
 # Try to download first and last pieces of each file first. This is useful for previewing files.
 bt-prioritize-piece=head
 # Removes the unselected files when download is completed in BitTorrent.
 bt-remove-unselected-file=true
 # Seed previously downloaded files without verifying piece hashes.
-bt-seed-unverified=true
+bt-seed-unverified=false
+# Set the connect timeout in seconds to establish connection to tracker. After the connection is established, this option makes no effect and --bt-tracker-timeout option is used instead.
+bt-tracker-connect-timeout=10
+# Set timeout in seconds.
+bt-tracker-timeout=10
 # Set host and port as an entry point to IPv4 DHT network.
 dht-entry-point=dht.transmissionbt.com:6881
 # Set host and port as an entry point to IPv6 DHT network.
@@ -70,4 +88,4 @@ enable-peer-exchange=true
 # Specify the string used during the bitorrent extended handshake for the peer's client version.
 peer-agent=Transmission/3.00
 # Specify the prefix of peer ID.
-peer-id-prefix=-TR2940-
+peer-id-prefix=-TR3000-

package.json

@@ -44,12 +44,12 @@
     "@electron/notarize": "^1.2.3",
     "@electron/osx-sign": "^1.0.4",
     "@electron/remote": "^2.0.9",
-    "@motrix/multispinner": "^0.2.2",
+    "@motrix/multispinner": "^0.2.4",
     "@motrix/nat-api": "^0.3.3",
     "@panter/vue-i18next": "^0.15.2",
     "@vue/eslint-config-standard": "^6.1.0",
     "ajv": "^8.12.0",
-    "axios": "^1.3.4",
+    "axios": "^1.3.5",
     "babel-eslint": "^10.1.0",
     "babel-loader": "^9.1.2",
     "babel-plugin-component": "^1.1.1",
@@ -62,8 +62,8 @@
     "css-loader": "^6.7.3",
     "css-minimizer-webpack-plugin": "^5.0.0",
     "del": "^6.1.1",
-    "electron": "^22.3.3",
-    "electron-builder": "^24.1.2",
+    "electron": "^22.3.5",
+    "electron-builder": "^24.2.0",
     "electron-devtools-installer": "^3.2.0",
     "electron-is": "^3.0.0",
     "electron-log": "^4.4.8",
@@ -86,7 +86,7 @@
     "normalize.css": "^8.0.1",
     "parse-torrent": "^9.1.5",
     "randomatic": "^3.1.1",
-    "sass": "1.59.3",
+    "sass": "1.61.0",
     "sass-loader": "^12.6.0",
     "style-loader": "^3.3.2",
     "terser-webpack-plugin": "^5.3.7",
@@ -99,7 +99,7 @@
     "vue-template-compiler": "^2.7.14",
     "vuex": "^3.6.2",
     "vuex-router-sync": "^5.0.0",
-    "webpack": "^5.77.0",
+    "webpack": "^5.78.0",
     "webpack-cli": "^5.0.1",
     "webpack-dev-server": "^4.13.2",
     "webpack-hot-middleware": "^2.25.3",