Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Wrong position of heat set insert hole on front_skirt_b_350 #62

Closed
Promix953 opened this issue Feb 25, 2022 · 1 comment · Fixed by #68
Closed

Wrong position of heat set insert hole on front_skirt_b_350 #62

Promix953 opened this issue Feb 25, 2022 · 1 comment · Fixed by #68
Assignees
@stvptrsn
Labels
CAD Errors

Comments

@Promix953
Copy link

front_skirt_b_350.stl
CAD
@stvptrsn
Copy link
Contributor

Thanks for the report. I'll include it in the next release. The problem is opposite of what you expect though. It's actually side A that's wrong :)

stvptrsn added a commit to stvptrsn/Voron-Trident that referenced this issue May 4, 2022
@stvptrsn
Correct misplaced heatset insert on front_skirt_a_350.stl. Fixes issue …
0efe473 
…VoronDesign#62.
@stvptrsn stvptrsn mentioned this issue May 14, 2022
Merged
@DunarDolorgiet DunarDolorgiet linked a pull request May 16, 2022 that will close this issue
Voron Trident r1 Updates #68
Merged
KiloQubit pushed a commit that referenced this issue May 19, 2022
@stvptrsn @DunarDolorgiet
Voron Trident r1 Updates (#68)
45922db 
* Revised front idlers with tensioning screws moved to be inline with the idler pulleys. Inspiration for this modification taken from Github issue posted by chrisingham05

* Correct misplaced heatset insert on front_skirt_a_350.stl.  Fixes issue #62.

* Added space for Spider V2.2 under-board fuse (Fixes issue #57).  Renamed all applicable controllers from _2pc.stl to _set.stl

* Modified XY joints and AB drive units unsupported countersunk bolt holes with the cross-bridge method. (Fixes issue #22).

* Copied all applicable changes from Voron Afterburner PR's 120 and 121.

* Changed all panel components with cross-bridge countersunk hole method.  Renamed wire_corner_* to wire_cover_*.  Moved deck supports to the Electronics Bay folder.

* Added mount for mains Wago connectors.  Move deck supports from Panel folder.  Updated, wider, pcb_din_clip.

* Updated skirt fan mounts from V2.4r2.  Uses M3 screws and heatset inserts to mount the fans and fan blanks.

* Updated pulley jig tool.

* Added Wago mount for bed mains wiring.

* Modified z_bed_*.stl to increase max Z travel by 3mm.

* Added an exhaust filter fan grill to correct spacing for the fan mounting screws.

* Corrected print orientation for [a]_exhaust_fan_grill.stl

* Trident R1 manuals

* Updated a_drive_frame_upper.stl, [a]_xy_joint_cable_bridge_3hole.stl and added chain_wire_anchor_3hole_x2.stl to provide cable chain wire anchors when using generic 3 hole cable chains.

* Reverted a_drive_frame_upper.stl in favor of chain_wire_anchor_a_3hole.stl as a cable chain anchor solution.

* manual update

* Updated CAD assembly.  Updated [a]_endstop_pod_D2F_switch.stl.

Co-authored-by: DunarDolorgiet <11033308+DunarDolorgiet@users.noreply.github.com>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees

@stvptrsn stvptrsn

Labels
CAD Errors
Projects
None yet
Milestone
No milestone
Development

Successfully merging a pull request may close this issue.

Voron Trident r1 Updates stvptrsn/Voron-Trident
3 participants
@raymondh2 @Promix953 @stvptrsn