Skip to content

Twinkie 2022.2.2

Latest
Latest
Compare
Choose a tag to compare
@TwinkieXLII TwinkieXLII released this 03 Apr 02:49
Twinkie-2022.2.2
fe332a9

Artist-D Twinkie-2022.2.1

Based on (Marlin 2.0.9.3)

Standard Version

https://github.com/TwinkieXLII/artistd/releases/

PRO VERSION

https://github.com/TwinkieXLII/ArtistD-Pro/releases/

What does this mean? This is now the foundation we've been waiting for to add BLTouch and UART support in the next few weeks. Stay tuned.

##Change Log
For the Pro version the most striking enhancement is the removal of the JGMaker Tile interface and adoption of the native Marlin Color UI interface.

  • Both version have on-board EEPROM support. so no more SD cards to save your offsets and bed mesh.
  • Meatpack support: Paired with this octoprint plugin, you can new send compressed data over a serial connection. Reducing stutter and removing a communication bottleneck for faster printer/pi communication.
  • Fixed Duplication mode - This is what was preventing other upgrades in the 2.0.8.x and early 2.0.9.x versions of Marlin
  • MAJOR overhaul of motion system
  • Host Action Commands
    • Better Integration with octoprint
    • Load a print in octoprint, and now there is a menu option to start the print from the LCD as if you clicked start in Octoprint (only tested on octoprint 1.7.3)
  • Emergency Parser (Pro)
  • Better IDEX menus
  • Improved Arc Support. (see ArcWelder plugin)
  • Speaker Support (ask me how to play scooby doo)

Upstream Marlin Changelogs

https://github.com/MarlinFirmware/Marlin/releases/tag/2.0.9.3

https://github.com/MarlinFirmware/Marlin/releases/tag/2.0.9.2

https://github.com/MarlinFirmware/Marlin/releases/tag/2.0.9.1

https://github.com/MarlinFirmware/Marlin/releases/tag/2.0.9

https://github.com/MarlinFirmware/Marlin/releases/tag/2.0.8

Flashing

Before flashing to your printer write down any modified settings such as tool offsets, extruder steps, etc. This will process will set your printer's settings back to how it was out of the box

  1. Download Robin_pro.bin from this release page
  2. Place the file on the SD card. The filename must not be changed.
  3. Power down the printer
  4. Place SD card in the printer
  5. Power the printer on.

At any point you wish to go back to the original firmware you can download it from JGMaker's site and follow the same steps as above.

Assets 3
Loading