Logic Home Control

This app adds support for Logic Home Control Z-wave devices made by Logic Home Control ApS.

Links:

Logic Home Control app Athom apps
Logic Home Control Github repository

Note: This app is using HomeyConfig composer.
Please file Pull Requests on the development branch of this repository and with respect to the refactored files in /drivers and /config folders.

Supported devices

• ZHC5010, Wall switch module for FUGA® installations product page
• ZHC5002, Z-Wave coupler for GIRA product page

Supported Languages:

• English

ZHC5010 Features

When ZHC5010 is included, a root device and 4 sub-devices (one for each button) are created. The root device has triggers for Central Scene notifications from all the buttons.

Triggers:

• Central Scene triggers for:
  • Single key press.
  • Double key press.
  • Long key press (key held).
  • Key release, after key held.

Actions:

• The root device is able to control the relay (onoff)
• The sub-devices control the linked devices (onoff, dim)
• It is possible to control the 4 LED's, by means of action cards.

ZHC5010 application notes

Detailed application notes for the ZHC5010, the Logic Home Control app (v2.x) and the ZHC5010 firmware version 2.x can be found here (credits to @cbho)

ZHC5002 Features

When ZHC5002 is included, a root device and 6 sub-devices (one for each button) are created. The root device has triggers for Central Scene notifications from all the buttons.

Triggers:

• Central Scene triggers for:
• Single key press.
• Double key press.
• Long key press (key held).
• Key release, after key held.

Actions:

• The root device is able to control the relay (onoff)
• The sub-devices control the linked devices (onoff, dim)

Change Log:

v 2.0.1

• Add link to Homey community Forum

v 2.0.0

• Major app update to SDK2, requires Homey SW release >=1.5.6
• Add support for the ZHC5002
• Added all options to support FW 2.x (secure inclusion) of ZHC5010 and ZHC5002
• Restructured parameters settings to simplify options

Release notes:

• Re-pairing (removal and inclusion) based on new app strongly recommended for ZHC5010 (scene flowcards will not work)
• It is advised to remove devices before updating the v 2.0.0 as this will reset the device and erase inclusion.
• Not removing a device prior to installation of v 2.0.0 will result in five orphaned devices that has to be deleted individually afterwards.