fixes #27 upgrade to modular build and STM8 eForth 2.2.24.pre3

Makefile

@@ -1,36 +1,79 @@
 STM8EF_BOARD=W1209-FD
-STM8EF_VER=2.2.23.pre2
+STM8EF_VER=2.2.24.pre3
 STM8EF_BIN=stm8ef-bin.zip
 STM8EF_URL=https://github.com/TG9541/stm8ef/releases/download/${STM8EF_VER}/${STM8EF_BIN}
 
-all: flash
+E4THCOM=e4thcom-0.6.3
+TERM_PORT=ttyUSB0
+TERM_BAUD=9600
+TERM_FLAGS=
 
-zip:
-	zip -r ${STM8EF_BOARD}-forth ${STM8EF_BOARD}-forth.ihx
+ifeq ($(BOARD),)
 
-defaults:
-	stm8flash -c stlinkv2 -p stm8s103f3 -s opt -w tools/stm8s103FactoryDefaults.bin
+# e4thcom style Forth code can't have a file suffix (but filenames are uppercase)
+mmforth:=$(shell echo `ls|gawk '/^[A-Z0-9]*$$/ {print}'`)
+forth=$(wildcard *fs) $(mmforth)
+
+.PHONY: test clean
+
+# Usage:make term BOARD=<board dir> [TERM_PORT=ttyXXXX] [TERM_BAUD=nnnn] [TERM_FLAGS="--half-duplex --idm"]
+all: load
+
+release: zip tgz
+
+zip: simload
+	find out/ -name "*.ihx" -print | zip -r out/stm8ef-bin docs/words.md inc/* mcu/* lib/* -@
+	find out/ -name "simbreak.txt" -print | zip -r out/stm8ef-bin tools/* -@
+	find out/ -name "target" -print | zip -r out/stm8ef-bin -@
+
+tgz: simload
+	( find out/ -path "*target/*" -print0 ; find out/ -name "*.ihx" -type f -print0 ; find out/ -name "simbreak.txt" -type f -print0 ) | tar -czvf out/stm8ef-bin.tgz LICENSE.md docs/words.md mcu lib tools --null -T -
+	( find out/ -name "forth.rst" -type f -print0 ) | tar -czvf out/stm8ef-rst.tgz --null -T -
+
+build: words
+	make BOARD=CORE
 
-flash: depend
+load: flash
+	tools/codeload.py -b out/$(STM8EF_BOARD) -p /dev/$(TERM_PORT) serial $(STM8EF_BOARD)/board.fs
+
+flash: target defaults
 	stm8flash -c stlinkv2 -p stm8s103f3 -w out/$(STM8EF_BOARD)/$(STM8EF_BOARD).ihx
 
-load: depend
-	tools/codeload.py serial main.fs
+defaults:
+	stm8flash -c stlinkv2 -p stm8s103f3 -s opt -w tools/stm8s103FactoryDefaults.bin
+
+test: simload
+	test/mbtest.sh $(STM8EF_BOARD)
 
-simload: depend
+simload: $(forth) target
 	tools/simload.sh $(STM8EF_BOARD)
+	touch simload
 
-target: depend
+target: binary
 	rm -f target
 	ln -s out/${STM8EF_BOARD}/target target
 
+binary: depend
+	make BOARD=W1209-FD
+
 depend:
 	if [ ! -d "out" ]; then \
 		curl -# -L -O ${STM8EF_URL}; \
 		unzip -q -o ${STM8EF_BIN} -x out/*; \
 		unzip -q -o ${STM8EF_BIN} out/${STM8EF_BOARD}/*; \
 		rm ${STM8EF_BIN}; \
 	fi
+	touch depend
+
+term:
+	$(E4THCOM) -t stm8ef -p .:lib $(TERM_FLAGS) -d $(TERM_PORT) -b B$(TERM_BAUD)
 
 clean:
-	rm -rf target STM8S103.efr STM8S105.efr docs lib mcu out tools
+	rm -rf target docs lib mcu out inc tools
+	rm -f forth.asm forth.h forth.mk main.c STM8S103.efr STM8S105.efr
+	rm -f simload depend
+
+else
+# the STM8 eForth make is a dependency
+include forth.mk
+endif

W1209-FD/board.fs

@@ -0,0 +1 @@
+#include main.fs

W1209-FD/boardcore.inc

@@ -0,0 +1,164 @@
+; XH-W1209 STM8S device dependent HW routines
+
+
+;       BOARDINIT  ( -- )
+;       Init board GPIO (except COM ports)
+BOARDINIT:
+        ; Board I/O initialization
+
+        ; W1209 STM8S003F3 init GPIO
+        MOV     PA_DDR,#0b00001110 ; relay,B,F
+        MOV     PA_CR1,#0b00001110
+        MOV     PB_DDR,#0b00110000 ; d2,d3
+        MOV     PB_CR1,#0b00110000
+        MOV     PC_DDR,#0b11000000 ; G,C
+        MOV     PC_CR1,#0b11111000 ; G,C-+S... Key pullups
+        MOV     PD_DDR,#0b00111110 ; A,DP,D,d1,A
+        MOV     PD_CR1,#0b00111110
+
+        .ifne   HAS_OUTPUTS
+        CLR     A
+        JRA     AOUTSTOR
+        .else
+        RET
+        .endif
+
+;===============================================================
+
+;      Dummy labels for PSIM interrupts declared in main.c
+
+        .ifne   PSIM-PORTA
+;       Dummy label for _EXTIA_IRQHandler
+_EXTI0_IRQHandler:
+        .endif
+
+        .ifne   PSIM-PORTB
+;       Dummy label for _EXTIB_IRQHandler
+_EXTI1_IRQHandler:
+        .endif
+
+        .ifne   PSIM-PORTC
+;       Dummy label for _EXTIC_IRQHandler
+_EXTI2_IRQHandler:
+        .endif
+
+        .ifne   PSIM-PORTD
+;       Dummy label for _EXTID_IRQHandler
+_EXTI3_IRQHandler:
+        .endif
+
+        .ifne   PSIM-PORTE
+;       Dummy label for _EXTIE_IRQHandler
+_EXTI4_IRQHandler:
+        .endif
+
+;===============================================================
+
+        .ifne   HAS_LED7SEG
+;       LED_MPX driver ( -- )
+;       Output bit pattern in A to 7S-LED digit hardware
+
+LED_MPX:
+        BSET    PD_ODR,#4       ; Digit .3..
+        BSET    PB_ODR,#5       ; Digit ..2.
+        BSET    PB_ODR,#4       ; Digit ...1
+
+        LD      A,TICKCNT+1
+        AND     A,#0x03         ; 3 digits MPX
+
+        JRNE    1$
+        BRES    PD_ODR,#4       ; digit .3..
+        JRA     3$
+
+1$:     CP      A,#1
+        JRNE    2$
+        BRES    PB_ODR,#5       ; digit ..2.
+        JRA     3$
+
+2$:     CP      A,#2
+        JRNE    4$
+        BRES    PB_ODR,#4       ; digit ...1
+        ; fall through
+
+3$:     CLRW    X
+        LD      XL,A
+        LD      A,(LED7LAST-2,X)
+
+        ; W1209 7S LED display row
+        ; bit 76453210 input (parameter A)
+        ;  PA .....FB.
+        ;  PC CG......
+        ;  PD ..A.DPE.
+        RRC     A
+        BCCM    PD_ODR,#5       ; A
+        RRC     A
+        BCCM    PA_ODR,#2       ; B
+        RRC     A
+        BCCM    PC_ODR,#7       ; C
+        RRC     A
+        BCCM    PD_ODR,#3       ; D
+        RRC     A
+        BCCM    PD_ODR,#1       ; E
+        RRC     A
+        BCCM    PA_ODR,#1       ; F
+        RRC     A
+        BCCM    PC_ODR,#6       ; G
+        RRC     A
+        BCCM    PD_ODR,#2       ; P
+
+4$:     RET
+        .endif
+
+;===============================================================
+
+        .ifne   HAS_OUTPUTS
+        RamWord OUTPUTS         ; "OUT", e.g. relays, LEDs, etc. (16 bit)
+
+;       OUT!  ( c -- )
+;       Put c to board outputs, storing a copy in OUTPUTS
+        .dw     LINK
+
+        LINK =  .
+        .db     (4)
+        .ascii  "OUT!"
+OUTSTOR:
+        INCW    X
+        LD      A,(X)
+        INCW    X
+AOUTSTOR:
+        LD      OUTPUTS+1,A
+        RRC     A
+        BCCM    PA_ODR,#3       ; W1209 relay
+        RET
+        .endif
+
+;===============================================================
+
+        .ifne   HAS_KEYS
+;       BKEY  ( -- c )     ( TOS STM8: -- A,Z,N )
+;       Read board key state as a bitfield
+        .dw     LINK
+
+        LINK =  .
+        .db     (4)
+        .ascii  "BKEY"
+BKEY:
+        ; Keys "set" (1), "+" (2), and "-" (4) on PC.3:5
+        LD      A,PC_IDR
+        SLA     A
+        SWAP    A
+        CPL     A
+        AND     A,#0x07
+        JP      ASTOR
+
+;       BKEYC  ( -- c )   ( TOS STM8: -- A,Z,N )
+;       Read and translate board dependent key bitmap into char
+
+BKEYCHAR:
+        CALLR   BKEY
+        JREQ    1$
+        ADD     A,#'@'
+        LD      (1,X),A
+1$:     RET
+       .endif
+

W1209-FD/globconf.inc

@@ -0,0 +1,43 @@
+; STM8EF Global Configuration File
+; Config for W1209 Thermostat Module
+; Clock: HSI (no crystal)
+
+        HALF_DUPLEX      = 0    ; Use UART in half duplex mode
+        HAS_TXUART       = 0    ; No UART TXD, word TX!
+        HAS_RXUART       = 0    ; No UART RXD, word ?RX
+        HAS_TXSIM        = 1    ; Enable TxD via GPIO/TIM4, word TXGP!
+        HAS_RXSIM        = 1    ; Enable RxD via GPIO/TIM4, word ?RXGP
+        PSIM     = PORTC        ; Port for UART simulation
+        PNRX             = 4    ; Port GPIO# for HAS_RXDSIM
+        PNTX             = 5    ; Port GPIO# for HAS_TXDSIM
+
+        EMIT_BG  = EMIT7S       ; 7S-LED background EMIT vector
+        QKEY_BG  = QKEYB        ; Board keys background QKEY vector
+
+        HAS_LED7SEG      = 1    ; yes, 1*3 dig. 7-seg LED on module
+
+        HAS_KEYS         = 3    ; yes, 3 keys on module
+        HAS_OUTPUTS      = 1    ; yes, one LED
+        HAS_ADC          = 1    ; Analog input words
+
+        HAS_BACKGROUND   = 1    ; Background Forth task (TIM2 ticker)
+        HAS_CPNVM        = 1    ; Can compile to Flash, always interpret to RAM
+        HAS_DOES         = 1    ; CREATE-DOES> extension
+        HAS_DOLOOP       = 1    ; DO .. LOOP extension: DO LEAVE LOOP +LOOP
+
+
+        CASEINSENSITIVE  = 1    ; Case insensitive dictionary search
+        SPEEDOVERSIZE    = 0    ; Speed-over-size in core words: ROT - = <
+        BAREBONES        = 0    ; Remove or unlink some more: hi HERE .R U.R SPACES @EXECUTE AHEAD CALL, EXIT COMPILE [COMPILE]
+
+        WORDS_LINKINTER  = 0    ; Link interpreter words: ACCEPT QUERY TAP kTAP hi 'BOOT tmp >IN 'TIB #TIB eval CONTEXT pars PARSE NUMBER? DIGIT? WORD TOKEN NAME> SAME? find ABORT aborq $INTERPRET INTER? .OK ?STACK EVAL PRESET QUIT $COMPILE
+        WORDS_LINKCOMP   = 0    ; Link compiler words: cp last OVERT $"| ."| $,n
+        WORDS_LINKRUNTI  = 0    ; Link runtime words: doLit do$ doVAR donxt dodoes ?branch branch
+        WORDS_LINKCHAR   = 1    ; Link char out words: DIGIT <# # #S SIGN #> str hld HOLD
+        WORDS_LINKMISC   = 0    ; Link composing words of SEE DUMP WORDS: >CHAR _TYPE dm+ .ID >NAME
+
+        WORDS_EXTRASTACK = 0    ; Link/include stack core words: rp@ rp! sp! sp@ DEPTH
+        WORDS_EXTRADEBUG = 0    ; Extra debug words: SEE
+        WORDS_EXTRACORE  = 1    ; Extra core words: =0 I
+        WORDS_EXTRAMEM   = 1    ; Extra memory words: B! 2C@ 2C!
+        WORDS_EXTRAEEPR  = 1    ; Extra EEPROM lock/unlock words: LOCK ULOCK ULOCKF LOCKF

W1209-FD/target.inc

@@ -0,0 +1,14 @@
+;       STM8S003F3 device and memory layout configuration
+
+        TARGET = STM8S003F3
+
+        RAMEND =        0x03FF  ; system (return) stack, growing down
+        EEPROMEND =     0x407F  ; STM8S003F3: 128 bytes EEPROM (maybe more, YMMV)
+        FLASHEND =      0x9FFF  ; 8K devices
+
+        FORTHRAM =      0x0040  ; Start of RAM controlled by Forth
+        UPPLOC  =       0x0060  ; UPP (user/system area) location for 1K RAM
+        CTOPLOC =       0x0080  ; CTOP (user dictionary) location for 1K RAM
+        SPPLOC  =       0x0350  ; SPP (data stack top), TIB start
+        RPPLOC  =       RAMEND  ; RPP (return stack top)
+

logger.fs

@@ -2,6 +2,7 @@
 \ © 2017 TG9541, refer to https://github.com/TG9541/W1209/blob/master/LICENSE
 
 #include STARTTEMP
+#require OUT
 
   $403E CONSTANT EE.PTR
   $4040 CONSTANT L.START