Skip to content

PMW3360 Module v1.0.1
Compare
Choose a tag to compare
@SunjunKim SunjunKim released this 17 Apr 11:39
· 9 commits to master since this release
1.0.1
68a4057

PMW3360 Module Library for Arduino

This library allows an Arduino board to easily communicate with PMW3360 Module.
This library is designed for https://www.tindie.com/products/jkicklighter/pmw3360-motion-sensor/
However, other setup will also work (e.g., https://easyeda.com/Justice/New_Project-cc5450b338fd4d55bef91ec37025ab6a).

For the most basic example, please take look at [basic_polling] example.
[basic_interrupt] example is using movement interrupt pin (MT) on the module. It does SPI transmission only if any movement is detects.
[HID_mouse] example will work as a regular mouse with left/right buttons.

PMW3360 class

  • void begin(unsigned int ss_pin, unsigned int CPI = 800)
    • Initialize the sensor. ss_pin is Slave Select pin on the module. Optionally CPI value can be set.
  • void setCPI(unsigned int newCPI); / unsigned int getCPI();
    • Set/get CPI (Count per Inch).
  • PMW3360_DATA readBurst();
    • Read sensor motion data using burst mode operation.
    • PMW3360_DATA is a struct that contains various information about a motion.
      • PMW3360_DATA.isMotion : bool, True if a motion is detected.
      • PMW3360_DATA.isOnSurface : bool, True when a chip is on a surface
      • PMW3360_DATA.dx, data.dy : integer, displacement on x/y directions.
      • PMW3360_DATA.SQUAL : byte, Surface Quality register, max 0x80
        * Number of features on the surface = SQUAL * 8
      • PMW3360_DATA.rawDataSum : byte, It reports the upper byte of an 18‐bit counter
        which sums all 1296 raw data in the current frame;
        * Avg value = Raw_Data_Sum * 1024 / 1296
      • PMW3360_DATA.maxRawData : byte, Max/Min raw data value in current frame, max=127
        PMW3360_DATA.minRawData
      • PMW3360_DATA.shutter : unsigned int, shutter is adjusted to keep the average
        raw data values within normal operating ranges.
  • byte readReg(byte reg_addr);
    • Read register value from the module.
  • void writeReg(byte reg_addr, byte data);
    • Write register value to the module.

Disclaimer: some part of the code is based on https://github.com/mrjohnk/PMW3360DM-T2QU

License

Copyright (c) Sunjun Kim. All right reserved.

This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.

This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA

Update log

  • v1.0.0
    • Initial release

v1.0.1

  • Bug fix on register reading (timing stabilized)
  • Sensor initialization check routine added. (begin() will return false if failed)
Assets 3
Loading