No SD library? #141

nabelekt · 2021-09-16T01:36:56Z

nabelekt
Sep 16, 2021

When I #include <SD.h> and compile with megaTinyCore, the library at https://github.com/SpenceKonde/megaTinyCore/tree/master/megaavr/libraries/SD is used.

However, when I #include <SD.h> and compile with DxCore, the default Arduino SD library is used, and the compilation fails:

Code

#include <SPI.h>
#include <SD.h>

Sd2Card card;

const int chipSelect = 4;

void setup() {
  card.init(SPI_HALF_SPEED, chipSelect);
}

void loop(void) {
}

Compilation Console Output

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\arduino-builder -dump-prefs -logger=machine -hardware C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\hardware -hardware C:\Users\nabel\OneDrive\Documents\ArduinoData\packages -tools C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\tools-builder -tools C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\hardware\tools\avr -tools C:\Users\nabel\OneDrive\Documents\ArduinoData\packages -built-in-libraries C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries -libraries C:\Users\nabel\OneDrive\Documents\Arduino\libraries -fqbn=DxCore:megaavr:avrda:appspm=no,chip=128DA28,clock=8internal,bodvoltage=1v9,bodmode=disabled,eesave=enable,resetpin=reset,millis=tcb2,startuptime=8 -vid-pid=2341_0001 -ide-version=10816 -build-path C:\Users\nabel\AppData\Local\Temp\arduino_build_525069 -warnings=none -build-cache C:\Users\nabel\AppData\Local\Temp\arduino_cache_773740 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.avr-gcc.path=C:\Users\nabel\OneDrive\Documents\ArduinoData\packages\DxCore\tools\avr-gcc\7.3.0-atmel3.6.1-azduino4b -prefs=runtime.tools.avr-gcc-7.3.0-atmel3.6.1-azduino4b.path=C:\Users\nabel\OneDrive\Documents\ArduinoData\packages\DxCore\tools\avr-gcc\7.3.0-atmel3.6.1-azduino4b -prefs=runtime.tools.arduinoOTA.path=C:\Users\nabel\OneDrive\Documents\ArduinoData\packages\arduino\tools\arduinoOTA\1.3.0 -prefs=runtime.tools.arduinoOTA-1.3.0.path=C:\Users\nabel\OneDrive\Documents\ArduinoData\packages\arduino\tools\arduinoOTA\1.3.0 -prefs=runtime.tools.avrdude.path=C:\Users\nabel\OneDrive\Documents\ArduinoData\packages\arduino\tools\avrdude\6.3.0-arduino18 -prefs=runtime.tools.avrdude-6.3.0-arduino18.path=C:\Users\nabel\OneDrive\Documents\ArduinoData\packages\arduino\tools\avrdude\6.3.0-arduino18 -prefs=runtime.tools.python3.path=C:\Users\nabel\OneDrive\Documents\ArduinoData\packages\megaTinyCore\tools\python3\3.7.2-post1 -prefs=runtime.tools.python3-3.7.2-post1.path=C:\Users\nabel\OneDrive\Documents\ArduinoData\packages\megaTinyCore\tools\python3\3.7.2-post1 -verbose C:\Users\nabel\AppData\Local\Temp\arduino_modified_sketch_872990\CardInfo.ino
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\arduino-builder -compile -logger=machine -hardware C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\hardware -hardware C:\Users\nabel\OneDrive\Documents\ArduinoData\packages -tools C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\tools-builder -tools C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\hardware\tools\avr -tools C:\Users\nabel\OneDrive\Documents\ArduinoData\packages -built-in-libraries C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries -libraries C:\Users\nabel\OneDrive\Documents\Arduino\libraries -fqbn=DxCore:megaavr:avrda:appspm=no,chip=128DA28,clock=8internal,bodvoltage=1v9,bodmode=disabled,eesave=enable,resetpin=reset,millis=tcb2,startuptime=8 -vid-pid=2341_0001 -ide-version=10816 -build-path C:\Users\nabel\AppData\Local\Temp\arduino_build_525069 -warnings=none -build-cache C:\Users\nabel\AppData\Local\Temp\arduino_cache_773740 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.avr-gcc.path=C:\Users\nabel\OneDrive\Documents\ArduinoData\packages\DxCore\tools\avr-gcc\7.3.0-atmel3.6.1-azduino4b -prefs=runtime.tools.avr-gcc-7.3.0-atmel3.6.1-azduino4b.path=C:\Users\nabel\OneDrive\Documents\ArduinoData\packages\DxCore\tools\avr-gcc\7.3.0-atmel3.6.1-azduino4b -prefs=runtime.tools.arduinoOTA.path=C:\Users\nabel\OneDrive\Documents\ArduinoData\packages\arduino\tools\arduinoOTA\1.3.0 -prefs=runtime.tools.arduinoOTA-1.3.0.path=C:\Users\nabel\OneDrive\Documents\ArduinoData\packages\arduino\tools\arduinoOTA\1.3.0 -prefs=runtime.tools.avrdude.path=C:\Users\nabel\OneDrive\Documents\ArduinoData\packages\arduino\tools\avrdude\6.3.0-arduino18 -prefs=runtime.tools.avrdude-6.3.0-arduino18.path=C:\Users\nabel\OneDrive\Documents\ArduinoData\packages\arduino\tools\avrdude\6.3.0-arduino18 -prefs=runtime.tools.python3.path=C:\Users\nabel\OneDrive\Documents\ArduinoData\packages\megaTinyCore\tools\python3\3.7.2-post1 -prefs=runtime.tools.python3-3.7.2-post1.path=C:\Users\nabel\OneDrive\Documents\ArduinoData\packages\megaTinyCore\tools\python3\3.7.2-post1 -verbose C:\Users\nabel\AppData\Local\Temp\arduino_modified_sketch_872990\CardInfo.ino
Using board 'avrda' from platform in folder: C:\Users\nabel\OneDrive\Documents\ArduinoData\packages\DxCore\hardware\megaavr\1.3.6
Using core 'dxcore' from platform in folder: C:\Users\nabel\OneDrive\Documents\ArduinoData\packages\DxCore\hardware\megaavr\1.3.6
Detecting libraries used...
"C:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\tools\\avr-gcc\\7.3.0-atmel3.6.1-azduino4b/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=avr128da28 -DF_CPU=8000000L -DARDUINO=10816 -DARDUINO_avrda -DARDUINO_ARCH_MEGAAVR "-DDXCORE=\"1.3.6\"" -DDXCORE_MAJOR=1UL -DDXCORE_MINOR=3UL -DDXCORE_PATCH=6UL -DDXCORE_RELEASED=1 -DMILLIS_USE_TIMERB2 -DCLOCK_SOURCE=0 "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\cores\\dxcore/api/deprecated" "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\cores\\dxcore" "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\variants\\28pin-standard" "C:\\Users\\nabel\\AppData\\Local\\Temp\\arduino_build_525069\\sketch\\CardInfo.ino.cpp" -o nul
Alternatives for SPI.h: [SPI@1.0.2]
ResolveLibrary(SPI.h)
  -> candidates: [SPI@1.0.2]
"C:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\tools\\avr-gcc\\7.3.0-atmel3.6.1-azduino4b/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=avr128da28 -DF_CPU=8000000L -DARDUINO=10816 -DARDUINO_avrda -DARDUINO_ARCH_MEGAAVR "-DDXCORE=\"1.3.6\"" -DDXCORE_MAJOR=1UL -DDXCORE_MINOR=3UL -DDXCORE_PATCH=6UL -DDXCORE_RELEASED=1 -DMILLIS_USE_TIMERB2 -DCLOCK_SOURCE=0 "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\cores\\dxcore/api/deprecated" "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\cores\\dxcore" "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\variants\\28pin-standard" "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\libraries\\SPI\\src" "C:\\Users\\nabel\\AppData\\Local\\Temp\\arduino_build_525069\\sketch\\CardInfo.ino.cpp" -o nul
Alternatives for SD.h: [SD@1.2.4]
ResolveLibrary(SD.h)
  -> candidates: [SD@1.2.4]
"C:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\tools\\avr-gcc\\7.3.0-atmel3.6.1-azduino4b/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=avr128da28 -DF_CPU=8000000L -DARDUINO=10816 -DARDUINO_avrda -DARDUINO_ARCH_MEGAAVR "-DDXCORE=\"1.3.6\"" -DDXCORE_MAJOR=1UL -DDXCORE_MINOR=3UL -DDXCORE_PATCH=6UL -DDXCORE_RELEASED=1 -DMILLIS_USE_TIMERB2 -DCLOCK_SOURCE=0 "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\cores\\dxcore/api/deprecated" "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\cores\\dxcore" "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\variants\\28pin-standard" "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\libraries\\SPI\\src" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\\libraries\\SD\\src" "C:\\Users\\nabel\\AppData\\Local\\Temp\\arduino_build_525069\\sketch\\CardInfo.ino.cpp" -o nul
"C:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\tools\\avr-gcc\\7.3.0-atmel3.6.1-azduino4b/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=avr128da28 -DF_CPU=8000000L -DARDUINO=10816 -DARDUINO_avrda -DARDUINO_ARCH_MEGAAVR "-DDXCORE=\"1.3.6\"" -DDXCORE_MAJOR=1UL -DDXCORE_MINOR=3UL -DDXCORE_PATCH=6UL -DDXCORE_RELEASED=1 -DMILLIS_USE_TIMERB2 -DCLOCK_SOURCE=0 "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\cores\\dxcore/api/deprecated" "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\cores\\dxcore" "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\variants\\28pin-standard" "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\libraries\\SPI\\src" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\\libraries\\SD\\src" "C:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\libraries\\SPI\\src\\SPI.cpp" -o nul
"C:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\tools\\avr-gcc\\7.3.0-atmel3.6.1-azduino4b/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=avr128da28 -DF_CPU=8000000L -DARDUINO=10816 -DARDUINO_avrda -DARDUINO_ARCH_MEGAAVR "-DDXCORE=\"1.3.6\"" -DDXCORE_MAJOR=1UL -DDXCORE_MINOR=3UL -DDXCORE_PATCH=6UL -DDXCORE_RELEASED=1 -DMILLIS_USE_TIMERB2 -DCLOCK_SOURCE=0 "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\cores\\dxcore/api/deprecated" "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\cores\\dxcore" "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\variants\\28pin-standard" "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\libraries\\SPI\\src" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\\libraries\\SD\\src" "C:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\\libraries\\SD\\src\\File.cpp" -o nul
"C:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\tools\\avr-gcc\\7.3.0-atmel3.6.1-azduino4b/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=avr128da28 -DF_CPU=8000000L -DARDUINO=10816 -DARDUINO_avrda -DARDUINO_ARCH_MEGAAVR "-DDXCORE=\"1.3.6\"" -DDXCORE_MAJOR=1UL -DDXCORE_MINOR=3UL -DDXCORE_PATCH=6UL -DDXCORE_RELEASED=1 -DMILLIS_USE_TIMERB2 -DCLOCK_SOURCE=0 "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\cores\\dxcore/api/deprecated" "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\cores\\dxcore" "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\variants\\28pin-standard" "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\libraries\\SPI\\src" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\\libraries\\SD\\src" "C:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\\libraries\\SD\\src\\SD.cpp" -o nul
"C:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\tools\\avr-gcc\\7.3.0-atmel3.6.1-azduino4b/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=avr128da28 -DF_CPU=8000000L -DARDUINO=10816 -DARDUINO_avrda -DARDUINO_ARCH_MEGAAVR "-DDXCORE=\"1.3.6\"" -DDXCORE_MAJOR=1UL -DDXCORE_MINOR=3UL -DDXCORE_PATCH=6UL -DDXCORE_RELEASED=1 -DMILLIS_USE_TIMERB2 -DCLOCK_SOURCE=0 "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\cores\\dxcore/api/deprecated" "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\cores\\dxcore" "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\variants\\28pin-standard" "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\libraries\\SPI\\src" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\\libraries\\SD\\src" "C:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\\libraries\\SD\\src\\utility\\Sd2Card.cpp" -o nul
"C:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\tools\\avr-gcc\\7.3.0-atmel3.6.1-azduino4b/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=avr128da28 -DF_CPU=8000000L -DARDUINO=10816 -DARDUINO_avrda -DARDUINO_ARCH_MEGAAVR "-DDXCORE=\"1.3.6\"" -DDXCORE_MAJOR=1UL -DDXCORE_MINOR=3UL -DDXCORE_PATCH=6UL -DDXCORE_RELEASED=1 -DMILLIS_USE_TIMERB2 -DCLOCK_SOURCE=0 "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\cores\\dxcore/api/deprecated" "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\cores\\dxcore" "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\variants\\28pin-standard" "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\libraries\\SPI\\src" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\\libraries\\SD\\src" "C:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\\libraries\\SD\\src\\utility\\SdFile.cpp" -o nul
"C:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\tools\\avr-gcc\\7.3.0-atmel3.6.1-azduino4b/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=avr128da28 -DF_CPU=8000000L -DARDUINO=10816 -DARDUINO_avrda -DARDUINO_ARCH_MEGAAVR "-DDXCORE=\"1.3.6\"" -DDXCORE_MAJOR=1UL -DDXCORE_MINOR=3UL -DDXCORE_PATCH=6UL -DDXCORE_RELEASED=1 -DMILLIS_USE_TIMERB2 -DCLOCK_SOURCE=0 "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\cores\\dxcore/api/deprecated" "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\cores\\dxcore" "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\variants\\28pin-standard" "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\libraries\\SPI\\src" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\\libraries\\SD\\src" "C:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\\libraries\\SD\\src\\utility\\SdVolume.cpp" -o nul
Generating function prototypes...
"C:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\tools\\avr-gcc\\7.3.0-atmel3.6.1-azduino4b/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=avr128da28 -DF_CPU=8000000L -DARDUINO=10816 -DARDUINO_avrda -DARDUINO_ARCH_MEGAAVR "-DDXCORE=\"1.3.6\"" -DDXCORE_MAJOR=1UL -DDXCORE_MINOR=3UL -DDXCORE_PATCH=6UL -DDXCORE_RELEASED=1 -DMILLIS_USE_TIMERB2 -DCLOCK_SOURCE=0 "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\cores\\dxcore/api/deprecated" "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\cores\\dxcore" "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\variants\\28pin-standard" "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\libraries\\SPI\\src" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\\libraries\\SD\\src" "C:\\Users\\nabel\\AppData\\Local\\Temp\\arduino_build_525069\\sketch\\CardInfo.ino.cpp" -o "C:\\Users\\nabel\\AppData\\Local\\Temp\\arduino_build_525069\\preproc\\ctags_target_for_gcc_minus_e.cpp"
"C:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\\tools-builder\\ctags\\5.8-arduino11/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "C:\\Users\\nabel\\AppData\\Local\\Temp\\arduino_build_525069\\preproc\\ctags_target_for_gcc_minus_e.cpp"
Compiling sketch...
"C:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\tools\\avr-gcc\\7.3.0-atmel3.6.1-azduino4b/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=avr128da28 -DF_CPU=8000000L -DARDUINO=10816 -DARDUINO_avrda -DARDUINO_ARCH_MEGAAVR "-DDXCORE=\"1.3.6\"" -DDXCORE_MAJOR=1UL -DDXCORE_MINOR=3UL -DDXCORE_PATCH=6UL -DDXCORE_RELEASED=1 -DMILLIS_USE_TIMERB2 -DCLOCK_SOURCE=0 "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\cores\\dxcore/api/deprecated" "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\cores\\dxcore" "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\variants\\28pin-standard" "-IC:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\1.3.6\\libraries\\SPI\\src" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\\libraries\\SD\\src" "C:\\Users\\nabel\\AppData\\Local\\Temp\\arduino_build_525069\\sketch\\CardInfo.ino.cpp" -o "C:\\Users\\nabel\\AppData\\Local\\Temp\\arduino_build_525069\\sketch\\CardInfo.ino.cpp.o"
In file included from C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2Card.h:26:0,
                 from C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/SdFat.h:29,
                 from C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/SD.h:20,
                 from C:\Users\nabel\AppData\Local\Temp\arduino_modified_sketch_872990\CardInfo.ino:2:
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:438:5: error: 'DDRD' was not declared in this scope
   {&DDRD, &PIND, &PORTD, 0},  // D0  0
     ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:438:5: note: suggested alternative: 'DD0'
   {&DDRD, &PIND, &PORTD, 0},  // D0  0
     ^~~~
     DD0
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:438:12: error: 'PIND' was not declared in this scope
   {&DDRD, &PIND, &PORTD, 0},  // D0  0
            ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:438:12: note: suggested alternative: 'PIN5'
   {&DDRD, &PIND, &PORTD, 0},  // D0  0
            ^~~~
            PIN5
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:439:5: error: 'DDRD' was not declared in this scope
   {&DDRD, &PIND, &PORTD, 1},  // D1  1
     ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:439:5: note: suggested alternative: 'DD0'
   {&DDRD, &PIND, &PORTD, 1},  // D1  1
     ^~~~
     DD0
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:439:12: error: 'PIND' was not declared in this scope
   {&DDRD, &PIND, &PORTD, 1},  // D1  1
            ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:439:12: note: suggested alternative: 'PIN5'
   {&DDRD, &PIND, &PORTD, 1},  // D1  1
            ^~~~
            PIN5
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:440:5: error: 'DDRD' was not declared in this scope
   {&DDRD, &PIND, &PORTD, 2},  // D2  2
     ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:440:5: note: suggested alternative: 'DD0'
   {&DDRD, &PIND, &PORTD, 2},  // D2  2
     ^~~~
     DD0
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:440:12: error: 'PIND' was not declared in this scope
   {&DDRD, &PIND, &PORTD, 2},  // D2  2
            ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:440:12: note: suggested alternative: 'PIN5'
   {&DDRD, &PIND, &PORTD, 2},  // D2  2
            ^~~~
            PIN5
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:441:5: error: 'DDRD' was not declared in this scope
   {&DDRD, &PIND, &PORTD, 3},  // D3  3
     ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:441:5: note: suggested alternative: 'DD0'
   {&DDRD, &PIND, &PORTD, 3},  // D3  3
     ^~~~
     DD0
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:441:12: error: 'PIND' was not declared in this scope
   {&DDRD, &PIND, &PORTD, 3},  // D3  3
            ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:441:12: note: suggested alternative: 'PIN5'
   {&DDRD, &PIND, &PORTD, 3},  // D3  3
            ^~~~
            PIN5
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:442:5: error: 'DDRD' was not declared in this scope
   {&DDRD, &PIND, &PORTD, 4},  // D4  4
     ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:442:5: note: suggested alternative: 'DD0'
   {&DDRD, &PIND, &PORTD, 4},  // D4  4
     ^~~~
     DD0
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:442:12: error: 'PIND' was not declared in this scope
   {&DDRD, &PIND, &PORTD, 4},  // D4  4
            ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:442:12: note: suggested alternative: 'PIN5'
   {&DDRD, &PIND, &PORTD, 4},  // D4  4
            ^~~~
            PIN5
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:443:5: error: 'DDRD' was not declared in this scope
   {&DDRD, &PIND, &PORTD, 5},  // D5  5
     ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:443:5: note: suggested alternative: 'DD0'
   {&DDRD, &PIND, &PORTD, 5},  // D5  5
     ^~~~
     DD0
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:443:12: error: 'PIND' was not declared in this scope
   {&DDRD, &PIND, &PORTD, 5},  // D5  5
            ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:443:12: note: suggested alternative: 'PIN5'
   {&DDRD, &PIND, &PORTD, 5},  // D5  5
            ^~~~
            PIN5
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:444:5: error: 'DDRD' was not declared in this scope
   {&DDRD, &PIND, &PORTD, 6},  // D6  6
     ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:444:5: note: suggested alternative: 'DD0'
   {&DDRD, &PIND, &PORTD, 6},  // D6  6
     ^~~~
     DD0
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:444:12: error: 'PIND' was not declared in this scope
   {&DDRD, &PIND, &PORTD, 6},  // D6  6
            ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:444:12: note: suggested alternative: 'PIN5'
   {&DDRD, &PIND, &PORTD, 6},  // D6  6
            ^~~~
            PIN5
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:445:5: error: 'DDRD' was not declared in this scope
   {&DDRD, &PIND, &PORTD, 7},  // D7  7
     ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:445:5: note: suggested alternative: 'DD0'
   {&DDRD, &PIND, &PORTD, 7},  // D7  7
     ^~~~
     DD0
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:445:12: error: 'PIND' was not declared in this scope
   {&DDRD, &PIND, &PORTD, 7},  // D7  7
            ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:445:12: note: suggested alternative: 'PIN5'
   {&DDRD, &PIND, &PORTD, 7},  // D7  7
            ^~~~
            PIN5
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:446:5: error: 'DDRB' was not declared in this scope
   {&DDRB, &PINB, &PORTB, 0},  // B0  8
     ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:446:5: note: suggested alternative: 'DD0'
   {&DDRB, &PINB, &PORTB, 0},  // B0  8
     ^~~~
     DD0
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:446:12: error: 'PINB' was not declared in this scope
   {&DDRB, &PINB, &PORTB, 0},  // B0  8
            ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:446:12: note: suggested alternative: 'PIN5'
   {&DDRB, &PINB, &PORTB, 0},  // B0  8
            ^~~~
            PIN5
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:446:19: error: 'PORTB' was not declared in this scope
   {&DDRB, &PINB, &PORTB, 0},  // B0  8
                   ^~~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:446:19: note: suggested alternative: 'PORT0'
   {&DDRB, &PINB, &PORTB, 0},  // B0  8
                   ^~~~~
                   PORT0
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:447:5: error: 'DDRB' was not declared in this scope
   {&DDRB, &PINB, &PORTB, 1},  // B1  9
     ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:447:5: note: suggested alternative: 'DD0'
   {&DDRB, &PINB, &PORTB, 1},  // B1  9
     ^~~~
     DD0
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:447:12: error: 'PINB' was not declared in this scope
   {&DDRB, &PINB, &PORTB, 1},  // B1  9
            ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:447:12: note: suggested alternative: 'PIN5'
   {&DDRB, &PINB, &PORTB, 1},  // B1  9
            ^~~~
            PIN5
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:447:19: error: 'PORTB' was not declared in this scope
   {&DDRB, &PINB, &PORTB, 1},  // B1  9
                   ^~~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:447:19: note: suggested alternative: 'PORT0'
   {&DDRB, &PINB, &PORTB, 1},  // B1  9
                   ^~~~~
                   PORT0
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:448:5: error: 'DDRB' was not declared in this scope
   {&DDRB, &PINB, &PORTB, 2},  // B2 10
     ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:448:5: note: suggested alternative: 'DD0'
   {&DDRB, &PINB, &PORTB, 2},  // B2 10
     ^~~~
     DD0
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:448:12: error: 'PINB' was not declared in this scope
   {&DDRB, &PINB, &PORTB, 2},  // B2 10
            ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:448:12: note: suggested alternative: 'PIN5'
   {&DDRB, &PINB, &PORTB, 2},  // B2 10
            ^~~~
            PIN5
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:448:19: error: 'PORTB' was not declared in this scope
   {&DDRB, &PINB, &PORTB, 2},  // B2 10
                   ^~~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:448:19: note: suggested alternative: 'PORT0'
   {&DDRB, &PINB, &PORTB, 2},  // B2 10
                   ^~~~~
                   PORT0
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:449:5: error: 'DDRB' was not declared in this scope
   {&DDRB, &PINB, &PORTB, 3},  // B3 11
     ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:449:5: note: suggested alternative: 'DD0'
   {&DDRB, &PINB, &PORTB, 3},  // B3 11
     ^~~~
     DD0
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:449:12: error: 'PINB' was not declared in this scope
   {&DDRB, &PINB, &PORTB, 3},  // B3 11
            ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:449:12: note: suggested alternative: 'PIN5'
   {&DDRB, &PINB, &PORTB, 3},  // B3 11
            ^~~~
            PIN5
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:449:19: error: 'PORTB' was not declared in this scope
   {&DDRB, &PINB, &PORTB, 3},  // B3 11
                   ^~~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:449:19: note: suggested alternative: 'PORT0'
   {&DDRB, &PINB, &PORTB, 3},  // B3 11
                   ^~~~~
                   PORT0
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:450:5: error: 'DDRB' was not declared in this scope
   {&DDRB, &PINB, &PORTB, 4},  // B4 12
     ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:450:5: note: suggested alternative: 'DD0'
   {&DDRB, &PINB, &PORTB, 4},  // B4 12
     ^~~~
     DD0
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:450:12: error: 'PINB' was not declared in this scope
   {&DDRB, &PINB, &PORTB, 4},  // B4 12
            ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:450:12: note: suggested alternative: 'PIN5'
   {&DDRB, &PINB, &PORTB, 4},  // B4 12
            ^~~~
            PIN5
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:450:19: error: 'PORTB' was not declared in this scope
   {&DDRB, &PINB, &PORTB, 4},  // B4 12
                   ^~~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:450:19: note: suggested alternative: 'PORT0'
   {&DDRB, &PINB, &PORTB, 4},  // B4 12
                   ^~~~~
                   PORT0
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:451:5: error: 'DDRB' was not declared in this scope
   {&DDRB, &PINB, &PORTB, 5},  // B5 13
     ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:451:5: note: suggested alternative: 'DD0'
   {&DDRB, &PINB, &PORTB, 5},  // B5 13
     ^~~~
     DD0
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:451:12: error: 'PINB' was not declared in this scope
   {&DDRB, &PINB, &PORTB, 5},  // B5 13
            ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:451:12: note: suggested alternative: 'PIN5'
   {&DDRB, &PINB, &PORTB, 5},  // B5 13
            ^~~~
            PIN5
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:451:19: error: 'PORTB' was not declared in this scope
   {&DDRB, &PINB, &PORTB, 5},  // B5 13
                   ^~~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:451:19: note: suggested alternative: 'PORT0'
   {&DDRB, &PINB, &PORTB, 5},  // B5 13
                   ^~~~~
                   PORT0
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:452:5: error: 'DDRC' was not declared in this scope
   {&DDRC, &PINC, &PORTC, 0},  // C0 14
     ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:452:5: note: suggested alternative: 'DD0'
   {&DDRC, &PINC, &PORTC, 0},  // C0 14
     ^~~~
     DD0
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:452:12: error: 'PINC' was not declared in this scope
   {&DDRC, &PINC, &PORTC, 0},  // C0 14
            ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:452:12: note: suggested alternative: 'PIN5'
   {&DDRC, &PINC, &PORTC, 0},  // C0 14
            ^~~~
            PIN5
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:453:5: error: 'DDRC' was not declared in this scope
   {&DDRC, &PINC, &PORTC, 1},  // C1 15
     ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:453:5: note: suggested alternative: 'DD0'
   {&DDRC, &PINC, &PORTC, 1},  // C1 15
     ^~~~
     DD0
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:453:12: error: 'PINC' was not declared in this scope
   {&DDRC, &PINC, &PORTC, 1},  // C1 15
            ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:453:12: note: suggested alternative: 'PIN5'
   {&DDRC, &PINC, &PORTC, 1},  // C1 15
            ^~~~
            PIN5
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:454:5: error: 'DDRC' was not declared in this scope
   {&DDRC, &PINC, &PORTC, 2},  // C2 16
     ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:454:5: note: suggested alternative: 'DD0'
   {&DDRC, &PINC, &PORTC, 2},  // C2 16
     ^~~~
     DD0
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:454:12: error: 'PINC' was not declared in this scope
   {&DDRC, &PINC, &PORTC, 2},  // C2 16
            ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:454:12: note: suggested alternative: 'PIN5'
   {&DDRC, &PINC, &PORTC, 2},  // C2 16
            ^~~~
            PIN5
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:455:5: error: 'DDRC' was not declared in this scope
   {&DDRC, &PINC, &PORTC, 3},  // C3 17
     ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:455:5: note: suggested alternative: 'DD0'
   {&DDRC, &PINC, &PORTC, 3},  // C3 17
     ^~~~
     DD0
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:455:12: error: 'PINC' was not declared in this scope
   {&DDRC, &PINC, &PORTC, 3},  // C3 17
            ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:455:12: note: suggested alternative: 'PIN5'
   {&DDRC, &PINC, &PORTC, 3},  // C3 17
            ^~~~
            PIN5
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:456:5: error: 'DDRC' was not declared in this scope
   {&DDRC, &PINC, &PORTC, 4},  // C4 18
     ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:456:5: note: suggested alternative: 'DD0'
   {&DDRC, &PINC, &PORTC, 4},  // C4 18
     ^~~~
     DD0
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:456:12: error: 'PINC' was not declared in this scope
   {&DDRC, &PINC, &PORTC, 4},  // C4 18
            ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:456:12: note: suggested alternative: 'PIN5'
   {&DDRC, &PINC, &PORTC, 4},  // C4 18
            ^~~~
            PIN5
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:457:5: error: 'DDRC' was not declared in this scope
   {&DDRC, &PINC, &PORTC, 5}   // C5 19
     ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:457:5: note: suggested alternative: 'DD0'
   {&DDRC, &PINC, &PORTC, 5}   // C5 19
     ^~~~
     DD0
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:457:12: error: 'PINC' was not declared in this scope
   {&DDRC, &PINC, &PORTC, 5}   // C5 19
            ^~~~
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD\src/utility/Sd2PinMap.h:457:12: note: suggested alternative: 'PIN5'
   {&DDRC, &PINC, &PORTC, 5}   // C5 19
            ^~~~
            PIN5
Using library SPI at version 1.0.2 in folder: C:\Users\nabel\OneDrive\Documents\ArduinoData\packages\DxCore\hardware\megaavr\1.3.6\libraries\SPI 
Using library SD at version 1.2.4 in folder: C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\libraries\SD 
exit status 1
Error compiling for board AVR DA-series (no bootloader).

And I don't see an SD library under https://github.com/SpenceKonde/DxCore/tree/master/megaavr/libraries.

Is there an SD library compatible with the DA-series? If so, how can I install and use it? If not, can you tell me if there are known issues are with porting it over, possibly from megaTinyCore?

Thanks!

Answered by nabelekt

Sep 17, 2021

Just found #114. I'll plan to give the SD library that @SpenceKonde linked there a try.

View full answer

nabelekt · 2021-09-17T04:38:02Z

nabelekt
Sep 17, 2021
Author

Just found #114. I'll plan to give the SD library that @SpenceKonde linked there a try.

1 reply

nabelekt Sep 18, 2021
Author

Solved for my purposes. Details under #114.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

No SD library? #141

{{title}}

{{editor}}'s edit

{{editor}}'s edit

Replies: 1 comment 1 reply

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

Select a reply

No SD library? #141

nabelekt Sep 16, 2021

Replies: 1 comment · 1 reply

nabelekt Sep 17, 2021 Author

nabelekt Sep 18, 2021 Author

nabelekt
Sep 16, 2021

Replies: 1 comment 1 reply

nabelekt
Sep 17, 2021
Author

nabelekt Sep 18, 2021
Author