Add Artillery Genius Pro Profile

resources/profiles/Artillery.json

@@ -11,6 +11,10 @@
 	    {
             "name": "Artillery Genius",
             "sub_path": "machine/Artillery Genius.json"
+        },
+		{
+            "name": "Artillery Genius Pro",
+            "sub_path": "machine/Artillery Genius Pro.json"
         },
         {
             "name": "Artillery Sidewinder X2",
@@ -33,6 +37,10 @@
 		{
             "name": "0.15mm Optimal @Artillery Genius",
             "sub_path": "process/0.15mm Optimal @Artillery Genius.json"
+        },
+		{
+            "name": "0.15mm Optimal @Artillery Genius Pro",
+            "sub_path": "process/0.15mm Optimal @Artillery Genius Pro.json"
         },
 		{
             "name": "0.16mm Optimal @Artillery Hornet",
@@ -45,6 +53,10 @@
 		{
             "name": "0.20mm Standard @Artillery Genius",
             "sub_path": "process/0.20mm Standard @Artillery Genius.json"
+        },
+		{
+            "name": "0.20mm Standard @Artillery Genius Pro",
+            "sub_path": "process/0.20mm Standard @Artillery Genius Pro.json"
         },
         {
             "name": "0.20mm Standard @Artillery X2",
@@ -61,6 +73,10 @@
 		{
             "name": "0.25mm Draft @Artillery Genius",
             "sub_path": "process/0.25mm Draft @Artillery Genius.json"
+        },
+		{
+            "name": "0.25mm Draft @Artillery Genius Pro",
+            "sub_path": "process/0.25mm Draft @Artillery Genius Pro.json"
         },
 		{
             "name": "0.24mm Draft @Artillery Hornet",
@@ -133,6 +149,10 @@
         {
             "name": "Artillery Sidewinder X2 0.4 nozzle",
             "sub_path": "machine/Artillery Sidewinder X2 0.4 nozzle.json"
+        },
+		{
+            "name": "Artillery Genius Pro 0.4 nozzle",
+            "sub_path": "machine/Artillery Genius Pro 0.4 nozzle.json"
         },
 		{
             "name": "Artillery Hornet 0.4 nozzle",

resources/profiles/Artillery/filament/Artillery Generic ABS.json

@@ -16,6 +16,7 @@
 		"Artillery Sidewinder X1 0.4 nozzle",
 		"Artillery Genius 0.4 nozzle",
 		"Artillery Sidewinder X2 0.4 nozzle",
+		"Artillery Genius Pro 0.4 nozzle",
 		"Artillery Hornet 0.4 nozzle"
     ]
 }

resources/profiles/Artillery/filament/Artillery Generic ASA.json

@@ -16,6 +16,7 @@
 		"Artillery Sidewinder X1 0.4 nozzle",
 		"Artillery Genius 0.4 nozzle",
 		"Artillery Sidewinder X2 0.4 nozzle",
+		"Artillery Genius Pro 0.4 nozzle",
 		"Artillery Hornet 0.4 nozzle"
     ]
 }

resources/profiles/Artillery/filament/Artillery Generic PETG.json

@@ -46,6 +46,7 @@
 		"Artillery Sidewinder X1 0.4 nozzle",
 		"Artillery Genius 0.4 nozzle",
 		"Artillery Sidewinder X2 0.4 nozzle",
+		"Artillery Genius Pro 0.4 nozzle",
 		"Artillery Hornet 0.4 nozzle"
     ]
 }

resources/profiles/Artillery/filament/Artillery Generic PLA-CF.json

@@ -18,10 +18,23 @@
     "slow_down_layer_time": [
         "7"
     ],
+    "hot_plate_temp" : [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer" : [
+        "60"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "200"
+    ],
+    "nozzle_temperature": [
+        "200"
+    ],
     "compatible_printers": [
 		"Artillery Sidewinder X1 0.4 nozzle",
 		"Artillery Genius 0.4 nozzle",
 		"Artillery Sidewinder X2 0.4 nozzle",
+		"Artillery Genius Pro 0.4 nozzle",
 		"Artillery Hornet 0.4 nozzle"
     ]
 }

resources/profiles/Artillery/filament/Artillery Generic PLA.json

@@ -15,10 +15,23 @@
     "slow_down_layer_time": [
         "8"
     ],
+    "hot_plate_temp" : [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer" : [
+        "60"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "200"
+    ],
+    "nozzle_temperature": [
+        "200"
+    ],
     "compatible_printers": [
 		"Artillery Sidewinder X1 0.4 nozzle",
 		"Artillery Genius 0.4 nozzle",
 		"Artillery Sidewinder X2 0.4 nozzle",
+		"Artillery Genius Pro 0.4 nozzle",
 		"Artillery Hornet 0.4 nozzle"
     ]
 }

resources/profiles/Artillery/filament/Artillery Generic TPU.json

@@ -13,6 +13,7 @@
 		"Artillery Sidewinder X1 0.4 nozzle",
 		"Artillery Genius 0.4 nozzle",
 		"Artillery Sidewinder X2 0.4 nozzle",
+		"Artillery Genius Pro 0.4 nozzle",
 		"Artillery Hornet 0.4 nozzle"
     ]
 }

resources/profiles/Artillery/machine/Artillery Genius Pro 0.4 nozzle.json

@@ -0,0 +1,114 @@
+{
+    "type": "machine",
+    "setting_id": "GM003",
+    "name": "Artillery Genius Pro 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_machine_common",
+    "printer_model": "Artillery Genius Pro",
+    "default_print_profile": "0.20mm Standard @Artillery Genius Pro",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "bed_exclude_area": [
+      "0x0"
+    ],
+    "printable_area": [
+      "0x0",
+      "230x0",
+      "230x230",
+      "0x230"
+    ],
+    "printable_height": "250",
+	"nozzle_type": "hardened_steel",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"1000",
+		"1250"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000",
+		"1250"
+	],
+	"machine_max_acceleration_travel": [
+		"1000",
+		"1250"
+	],
+	"machine_max_acceleration_x": [
+		"2000",
+		"1000"
+	],
+	"machine_max_acceleration_y": [
+		"2000",
+		"1000"
+	],
+	"machine_max_acceleration_z": [
+		"500",
+		"200"
+	],
+	"machine_max_speed_e": [
+		"120",
+		"120"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"200"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"200"
+	],
+	"machine_max_speed_z": [
+		"12",
+		"12"
+	],
+	"machine_max_jerk_e": [
+		"3",
+		"2.5"
+	],
+	"machine_max_jerk_x": [
+		"7",
+		"10"
+	],
+	"machine_max_jerk_y": [
+		"7",
+		"10"
+	],
+	"machine_max_jerk_z": [
+		"0.2",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.32"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"printer_settings_id": "Artillery",
+	"retraction_minimum_travel": [
+		"2"
+	],
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retraction_length": [
+		"2.2"
+	],
+	"retract_length_toolchange": [
+		"10"
+	],
+	"deretraction_speed": [
+		"0"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "",
+	"machine_pause_gcode": "M0",
+	"default_filament_profile": [
+		"Artillery Generic PLA"
+	],
+    "machine_start_gcode": "M83; extruder relative mode\nG28; home all axes\nG29 S12000; bed mesh leveling\nM104 S[nozzle_temperature_initial_layer]; set hotend temperature\nM140 S[bed_temperature_initial_layer_single]; set heatbed temperature\nG90; Absolute Positioning\nG1 Y0 F5000; Move to front\nG1 X0 F5000; Move to origin\nM190 S[bed_temperature_initial_layer_single]; wait for the bed to heat up\nM109 S[nozzle_temperature_initial_layer]; wait for the extruder to heat up\nG92 E0; reset extruder\nG1 X20 Y5 Z0.3 F5000.0; move to start-line position\nG1 Z0.3 F1000; print height\nG1 X200 Y5 F1500.0 E15; draw 1st line\nG1 X200 Y5.3 Z0.3 F5000.0; move to side a little\nG1 X5.3  Y5.3 Z0.3 F1500.0 E30; draw 2nd line\nG1 Z3 F3000; move z up little to prevent scratching of surface",
+    "machine_end_gcode": "G91; Relative positionning\nG1 E-2 Z0.2 F2400; Retract and raise Z\nG1 X5 Y5 F3000; Wipe out\nG1 Z10; Raise Z more\nG90; Absolute positionning\nG1 X0 Y100; Present print\nM106 S0; Turn-off fan\nM104 S0; Turn-off hotend\nM140 S0; Turn-off bed\nM84 X Y E; Disable all steppers but Z",
+    "layer_change_gcode": "",
+    "scan_first_layer": "0"
+  }
+

resources/profiles/Artillery/machine/Artillery Genius Pro.json

@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Artillery Genius Pro",
+    "model_id": "Artillery-Genius-Pro",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "Artillery",
+    "bed_model": "artillery_geniuspro_buildplate_model.stl",
+    "bed_texture": "artillery_geniuspro_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Artillery Generic ABS;Artillery Generic PLA;Artillery Generic PLA-CF;Artillery Generic PETG;Artillery Generic TPU;Artillery Generic ASA"
+}

resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius Pro.json

@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.15mm Optimal @Artillery Genius Pro",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_process_common",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.15",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "1",
+	"bridge_speed": "70",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.15",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.4",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.5",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.25",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "3",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.4",
+	"support_interface_loop_pattern": "1",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "1",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "60",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "50%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "60",
+	"internal_solid_infill_speed": "30",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "110",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Artillery Genius Pro 0.4 nozzle"
+	]
+}