Skip to content

RedHatInsights/insights-client

Repository files navigation

Red Hat Insights Client

insights-client is a wrapper for Insights Core (the egg).

Developer Setup

Follow these instructions to prepare your system for development.

  1. Fork both this and insights-core repository.

  2. Clone both of them to the same directory:

    $ git clone git@github.com:$YOU/insights-client.git
    $ git clone git@github.com:$YOU/insights-core.git
  3. Make sure your virtual environment uses system site packages.

    • For existing one, set include-system-site-packages = true in virtual environment's pyvenv.cfg.
    • For new one, create it with --system-site-packages flag.
    • Make sure both repositories share the virtual environment.
  4. Install the insights-core as a Python package.

    First, make sure the following directories and files exist, otherwise the code will scream at you:

    $ sudo mkdir -p /etc/insights-client
    $ sudo touch /etc/insights-client/.exp.sed
    $ sudo ln -s `pwd`/data/redhattools.pub.gpg /etc/insights-client/
    $ sudo ln -s `pwd`/data/cert-api.access.redhat.com.pem /etc/insights-client/

    Then you can install the package using pip:

    $ cd insights-client
    $ python3 -m pip install --upgrade pip wheel
    $ python3 -m pip install -e ../insights-core/.[client-develop]
  5. Run the client.

    $ sudo PYTHONPATH=./src BYPASS_GPG=True EGG=../insights-core python src/insights_client/__init__.py --no-gpg --help

    Note: BYPASS_GPG skips the verification on Client side, --no-gpg disables it on Core side.

  6. To build an insights-core egg from source, run build_client_egg.sh from the insights-core repo.

    $ cd ../insights-core
    $ bash build_client_egg.sh
    $ # File `insights.zip` gets created in the current directory
    $ cd ../insights-client
    $ # To use the zip file as an egg, pass `EGG=../insights-core/insights.zip`

Contributing

  • Every relevant change should have a test, if possible.
  • Every commit containing Python code should be formatted with black.
  • Every commit/PR will be checked for those in CI.
  • Read TESTING.md for more information.

Architecture Summary

The Insights Client consists of two pieces: the main RPM-installed executable that ships with RHEL (the insights-client repository, from here on referred to as wrapper), and the updatable core module (the insights-core repository, from here on referred to as egg).

Wrapper

The wrapper is the main entry point for the Insights Client, and its job is to initiate the phases. For each phase, the wrapper iterates over the available eggs, and tries each in succession to perform a collection & upload. If an egg fails, the client will try the next available egg. If all eggs fail, execution will halt. All possible eggs are described as follows, in the order in which they are tried:

  1. ENV_EGG - an egg specified by the environment variable EGG,
  2. NEW_EGG - newest available egg, if an update has been performed,
  3. STABLE_EGG - the last egg that performed a successful collection & upload,
  4. RPM_EGG - the default egg that ships with the RPM.

Egg

The egg is a bundle that contains the Insights Core module with all the main functionality. All flags and configurations are passed to the egg by the wrapper.

Phases

The Insights Client runs in four phases. They are modularized, so if one of them crashes due to a bad egg, the process can be resumed at that phase using the egg that's next in the priority list.

  1. Pre-Update
    Execute any flags that exit immediately (except --status and --unregister). If necessary, exit.

  2. Update
    Establish a connection to Insights and update the local egg if the upstream contains a newer version (using etags). During legacy collection, download the newest version of uploader.json.

  3. Post-Update
    Process registration options. Check registration. If the system is not registered and the operation requires the registration, exit.

  4. Collect and output
    Run the collection. Output it in desired format; the default is to upload the archive to Insights.

Configuration

The configuration file uses INI format (see configparser). The main section for configuration variables is [insights-client].

The configuration uses the values in the following hierarchy:

  1. CLI flags
  2. /etc/insights-client/insights-client.conf
  3. environment variables.

Environment Variables

Environment configuration can be used by setting environment variables with names in the format INSIGHTS_xxxxxx, where xxxxxx is the configuration variable name, in all caps.

insights-client.conf File

Configuration variables available in the configuration file and their explanations:

  • loglevel - set the Python logger's default level (DEBUG, INFO, WARNING, ERROR, CRITICAL). Default DEBUG
  • auto_config - attempt to auto-configure the network connection with Satellite or RHSM. Default True
  • authmethod - authentication method for the Portal (BASIC, CERT). Default is BASIC Note: when auto_config is enabled, CERT will be used if RHSM or Satellite is detected
  • username - username for basic auth. Blank by default
  • password - password for basic auth. Blank by default
  • base_url - base url for the Insights API. Default cert-api.access.redhat.com:443/r/insights
  • cert_verify - path to CA cert to verify SSL against. Default /etc/insights-client/cert-api.access.redhat.com.pem
  • proxy - proxy URL. Blank by default
  • auto_update - whether to update the rule spec file (uploader.json) and the insights-core egg. Default True
  • obfuscate - whether to obfuscate IP addresses in collected data. Default False
  • obfuscate_hostname - whether to obfuscate hostnames in collected data. Default False
  • cmd_timeout - how many seconds to allow a command to run before issuing a termination or kill signal. Default 120
  • http_timeout - how many seconds to allow an HTTP call to execute before timing out. Default 120
  • core_collect - if True, use insights-core to run collection instead of commands/files from uploader.json. Default False
  • redaction_file - location of the redaction file. Default /etc/insights-client/file-redaction.yaml
  • content_redaction_file - location of the content redaction file. Default /etc/insights-client/file-content-redaction.yaml
  • legacy_upload - Use legacy HTTP configuration to perform the upload. Default True

Command Line Switches

Command line switches available and their explanations.

  • --register - Register a system with the Insights API. Required for basic collection & upload, except in the case of certain targets or if --offline is specified
  • --display-name=DISPLAYNAME - Display name to appear in the insights web UI. This can be used at registration time, or standalone to change the display name any time.
  • --group=GROUP - Add a tag named group to the system in the insights web UI and in insights-client tags file.
  • --retry=RETRIES - Number of times to retry the collection archive upload. Default is 1.
  • --quiet - Run with limited console output. This will only print ERROR level messages.
  • --silent - Run with no console output at all.
  • --conf, -c - Load a custom configuration file other than the default /etc/insights-client/insights-client.conf
  • --offline - Run with no network connectivity at all. Implies --no-upload and makes machine registration unnecessary.
  • --logging-file - Log to a file other than the default /var/log/insights-client/insights-client.log
  • --verbose - Run with all log output. This will print DEBUG level messages.
  • --no-upload - Collect the archive, but do not upload it.
  • --keep-archive - Collect the archive, and do not delete it after upload.
  • --net-debug - Show network debug messages in the console output.
  • --output-dir=DIR - Write the collected data to a specified directory without compression. Does not upload.
  • --output-file=FILE - Write the collected data to a specified archive. Does not upload.
  • --build-packagecache - Attempt to rebuild DNF or YUM cache for current archive generation.

Switches that exit immediately

These particular switches supersede normal client operation; they skip collection and exit after printing their necessary output.

  • --version - Print the versions of both the wrapper and egg, then exit.
  • --unregister - Unregister this system from the Insights API.
  • --display-name=DISPLAYNAME - When used without --register, change the display name and exit.
  • --validate - Validate the format of the remove.conf file.
  • --enable-schedule - Enable the Insights systemd job.
  • --disable-schedule - Disable the Insights systemd job.
  • --test-connection - Run a test to confirm connectivity from the machine to the Insights API.
  • --support - Print a log of basic diagnostics such as version, registration status, connectivity, config, etc.
  • --status - Print the registration status.
  • --payload=PAYLOAD - Upload a specified file PAYLOAD. Requires --content-type
  • --content-type=CONTENTTYPE - Specify the console.redhat.com platform-specific content type for --payload option.
  • --diagnosis=ID - Retrieve remediations for this host, optionally providing a diagnosis ID.
  • --compliance - Perform a compliance upload.
  • --show-results - Log the cached system profile to console. See also: --check-results under Hidden switches

Hidden switches

These switches are undocumented and for developer use only.

  • --no-gpg - Run without verifying the signature of the egg or rule collection spec.
  • --debug-phases - Print info about phase execution and egg fallback
  • --to-json - Print the collection results to the console as JSON. Deprecated as rule results are no longer returned by the upload service.
  • --check-results - Fetch the system profile and cache it. Produces no output to console. Not meant to be run as a standalone option but rather as part of a regular systemd job that refreshes the cached data.

Recommended Developer Config

For convenience, some sample configs are provided here for developers for connecting to the different environments the client can interface with. These configurations can be defined via config file or via environment variables using the naming described under Environment Variables. The following are in config file notation and can be used as drop-in configuration.

CI (Basic Auth)

Note: CI requires basic auth.

[insights-client]
auto_config=False
username=<username>
password=<password>
legacy_upload=False
base_url=ci.cloud.redhat.com/api
cert_verify=False

QA (Basic Auth)

Note: QA requires basic auth.

[insights-client]
auto_config=False
username=<username>
password=<password>
legacy_upload=False
base_url=qa.cloud.redhat.com/api
cert_verify=False

Stage (RHSM Auth)

Note: This configuration assumes that the system is registered to Stage RHSM. Insights Client will autoconfigure to interface with stage.

[insights-client]
proxy=http://squid.corp.redhat.com:3128

Stage (Basic Auth)

[insights-client]
auto_config=False
username=<username>
password=<password>
legacy_upload=False
base_url=cert.cloud.stage.redhat.com/api
cert_verify=True
proxy=http://squid.corp.redhat.com:3128

Prod (RHSM Auth)

[insights-client]
auto_config=False
authmethod=CERT
legacy_upload=False
base_url=cert.cloud.redhat.com/api
cert_verify=True

Prod (Basic Auth)

[insights-client]
auto_config=False
username=<username>
password=<password>
legacy_upload=False
base_url=cert.cloud.redhat.com/api
cert_verify=True

Prod [classic API] (RHSM Auth)

No additional configuration is required beyond the defaults. Insights Client will autoconfigure to interface with classic prod.

Prod [classic API] (Basic Auth)

[insights-client]
auto_config=False
username=<username>
password=<password>

Collection

Insights Client utilizes insights-core to perform data collection. Details on the workings of insights-core can be found here: https://github.com/RedHatInsights/insights-core#documentation.

Archive Structure

The Insights archive has the following structure:

insights.tar.gz
│
├───blacklist_report    <-- Usage metrics for file redaction
├───branch_info         <-- Satellite metadata
├───collection_stats    <-- Collection execution metrics (e.g., elapsed time, command exit codes)
├───data
│   ├───boot
│   │   └───...
│   ├───etc
│   │   ├───insights-client
│   │   │   └───machine-id  <-- unique identifier for this system
│   │   └───...
│   ├───insights_commands   <-- output dumps of commands
│   │   └───...
│   ├───proc
│   │   └───...
│   ├───sys
│   │   └───...
│   └───var
│       └───...
├───display_name        <-- Display name of this host, if specified
├───egg_release         <-- Record of the egg release channel
├───metadata            <-- Metadata generated by insights-core
│   └───...
├───tags.json           <-- Tags for this host
└───version_info        <-- Record of the client and core versions

Legacy Collection

Note: This method of collection is deprecated in favor of core collection and is planned to be removed in a future release.

Insights Client's classic collection has two parts: files and commands. Both are implemented in insights-core/insights/client/insights_spec.py.

Files

Files are collected using sed to scrape file contents, with the following caveats:

  • Files defined in the files section of file-redaction.yaml are skipped completely
  • Lines containing anything in the patterns section of file-content-redaction.yaml will be omitted from the file content
  • Keywords defined in the keywords section of file-content-redaction.yaml will be replaced with keyword# in the file content. The file contents are copied to a path within the archive defined from the uploader.json, which in most cases is similar or identical to its path on the filesystem mountpoint, i.e. /etc/cluster/cluster.conf.

Commands

Commands are run such that their output is collected by the client, with the following caveats:

  • Commands rm, kill, reboot, shutdown are never run
  • Commands defined in the commands section of file-redaction.yaml are skipped completely
  • Lines containing anything in the patterns section of file-content-redaction.yaml will be omitted from command output
  • Keywords defined in the keywords section of file-content-redaction.yaml will be replaced with keyword# in the command output
  • If a command does not exist, the client will gracefully report as such, and continue. Command outputs are copied to a path within the archive insights_commands/<command> where <command> is an escaped format of the full command syntax, including arguments, i.e., /insights_commands/df_-alP.

Archive Structure (Legacy)

The legacy Insights archive has the following structure:

insights.tar.gz
│
├───blacklist_report    <-- Usage metrics for file redaction
├───boot
│   └───...
├───branch_info         <-- Satellite metadata
├───collection_stats    <-- Collection execution metrics (e.g., elapsed time, command exit codes)
├───display_name        <-- Display name of this host, if specified
├───egg_release         <-- Record of the egg release channel
├───etc
│   ├───insights-client
│   │   └───machine-id    <-- unique identifier for this system
│   └───...
├───insights_commands   <-- output dumps of commands
│   └───...
├───proc
│   └───...
├───sys
│   └───...
├───tags.json           <-- Tags for this host
├───var
│   └───...
└───version_info        <-- Record of the client and core versions