Squashed commit of the following:

commit 733ca940c0ed582fcd0e0a39b10b1fe8986b574c
Author: tombrazier <68918209+tombrazier@users.noreply.github.com>
Date:   Sat Jul 23 05:32:28 2022 +0100

    🐛 Fix 2d mesh print (#24536)

commit c880c7ed45540a375a8fb82d7c343d21a1c9060b
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Jul 14 02:56:55 2022 -0500

    🔨 Fix and update Makefile

    Followup to 89fe5f6d

commit e5e4cf920d406c45a66d00cd379fee08f4da0985
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date:   Wed Jul 13 23:31:47 2022 -0700

    📌 Pin ESP32SSDP to 1.1.1 (#24489)

commit 3315f6faa4fed3fde158013c8575d6bc6b813f3d
Author: Victor Oliveira <rhapsodyv@gmail.com>
Date:   Thu Jul 14 03:30:00 2022 -0300

    ✨ Creality3D v4.2.5 / CR200B (#24491)

commit 4a6ad1c98bde764255511c5bce58740b6e5cfb13
Author: GHGiampy <83699429+GHGiampy@users.noreply.github.com>
Date:   Thu Jul 14 07:03:27 2022 +0200

    🩹 Fix ProUI LED compile (#24473)

commit 3c9789fda810cb6cebfb835379780b27e1dbe6f5
Author: Miguel Risco-Castillo <mriscoc@users.noreply.github.com>
Date:   Thu Jul 14 00:00:33 2022 -0500

    🚸 Fix and update ProUI (#24477)

commit 3a19d34c7515598180abbc3e24d8991f8e8a098a
Author: toomuchwonder <43323256+toomuchwonder@users.noreply.github.com>
Date:   Thu Jul 14 04:17:53 2022 +0100

    🩹 Fix MKS UI extruder speed (#24476)

commit 6b19a58f035862292a3ec52b4efc388b746d69ad
Author: Bob Kuhn <bob.kuhn@att.net>
Date:   Wed Jul 13 22:16:22 2022 -0500

    🔥 Drop STM L64** drivers, STEVAL_3DP001V1 (#24427)

commit 9283859b1ef82d7aa82bcb64a70d1b25b8e6d22c
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Wed Jul 13 21:22:53 2022 -0500

    🎨 ANY => EITHER

commit e840015cad0bbbf882e0b90cb8d722725c6e1dd2
Author: GHGiampy <83699429+GHGiampy@users.noreply.github.com>
Date:   Thu Jul 14 03:25:35 2022 +0200

    🔨 Abort firmware update on transfer error (#24472, #24499)

commit efe04e10168a21f361a325a8c93840c2562042e0
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Tue Jul 12 13:25:36 2022 -0500

    🧑‍💻 Update Mac Sim directions

commit f543b3cb84e26c7594b9be2da1bcfc3c7c2b5a60
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Tue Jul 12 13:02:54 2022 -0500

    📌 Ask for PlatformIO 6.1.1 or newer (#24435)

commit 6a86c5bad32da03b71c5f0223904b44e129185f0
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date:   Mon Jul 11 11:33:42 2022 -0700

    ✨ MKS Monster8 V2 (#24483)

commit 7207a324341c3aaa8de8f103391576b274830c2d
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Jul 10 22:00:10 2022 -0500

    🧑‍💻 Add Sim debug with lldb

commit 678474d55cd92d14bde24d00dbc9322919cfc1e1
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date:   Fri Jul 8 13:30:03 2022 -0700

    🔧 Assert Probe Temp Comp requirements (#24468)

commit 24c211307d5a1d009d12c4d25d3828c05534f3e7
Author: Mike La Spina <mike.laspina@shaw.ca>
Date:   Fri Jul 8 15:02:12 2022 -0500

    🐛 Fix laser/fan sync (#24460)

    Followup to #22690, 307dfb15

commit 0c78a6f65791e1c2c3f4278ed2b48bcf20b9b063
Author: tombrazier <68918209+tombrazier@users.noreply.github.com>
Date:   Fri Jul 8 20:41:39 2022 +0100

    ⚡️ Optimize G2-G3 Arcs (#24366)

commit 79a332b57ea4a1ddb0e6b06d8dabae34268ed3bd
Author: Jason Smith <jason.inet@gmail.com>
Date:   Thu Jul 7 21:43:56 2022 -0700

    🩹 Fix LCD_BACKLIGHT_TIMEOUT compile (#24463)

commit d9ecbdcdbb8f5073987c848573d89cfb63719201
Author: Pauli Jokela <pauli.jokela@didstopia.com>
Date:   Thu Jul 7 18:59:23 2022 +0300

    🩹 Fix safe homing sanity-check (#24462)

commit 527fe2496af924c47411c7aa3c3622b22d04b42e
Author: Farva42 <100859196+Farva42@users.noreply.github.com>
Date:   Wed Jul 6 19:40:09 2022 -0600

    ✨ MAG_MOUNTED_PROBE (#24420)

    Co-Authored-By: Scott Lahteine <thinkyhead@users.noreply.github.com>

commit 6c2ffe9d341f8f61bca8e19b07c3fc6a1d904375
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Wed Jul 6 19:34:45 2022 -0500

    🔥 Remove JyersUI (#24459)

commit 0fdedfa2fb46d665fbd5686bc58e7126ee82bd97
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Wed Jul 6 19:29:07 2022 -0500

    📝 Configurations 02010100 (#24458)

commit e93a1dd2fae37457894bf04b30e1c8ad5801b35c
Author: Meilleur Gars <98503100+LCh-77@users.noreply.github.com>
Date:   Wed Jul 6 13:46:11 2022 -0700

    🚸 JyersUI updates (#24451)

commit 03760fd79ea7f020f8739647f7a420bf4ec286b7
Author: Christophe Huriaux <c.huriaux@gmail.com>
Date:   Wed Jul 6 22:43:38 2022 +0200

    🩹 Fix ST7565 LCD contrast init (#24457)

commit d3aed23e18bd9b165282ad83ef86422510af55c0
Author: Bob Kuhn <bob.kuhn@att.net>
Date:   Wed Jul 6 08:35:08 2022 -0500

    🐛 Fix Sensorless Probing compile (#24455)

commit 893707711e2a507aa48e41c3c59a267f9aea238f
Author: Eduard Sukharev <sukharev.eh@gmail.com>
Date:   Wed Jul 6 16:30:47 2022 +0300

    🐛 Fix MKS TinyBee compile (#24454)

commit d965303a7a1592e348853c1620cf54576652ace8
Author: Mike La Spina <mike.laspina@shaw.ca>
Date:   Wed Jul 6 07:46:39 2022 -0500

    ⚡️ Fix and improve Inline Laser Power (#22690)

commit 5b6c46db2910b3ec651793d8cb0c1d1b08a39384
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date:   Sun Jul 3 22:31:06 2022 -0700

    ✨ BigTreeTech SKR SE BX V3.0 (#24449)

    SKR SE BX V3.0 removes the Reverse Driver Protection feature.

commit 8f40a2f257511370f587f15613b2308cabdb2ee0
Author: EvilGremlin <22657714+EvilGremlin@users.noreply.github.com>
Date:   Mon Jul 4 04:49:23 2022 +0300

    🔨 Fix OpenBLT encode; no-bootloader envs (#24446)

commit e4f85e8fbc57e4688b966fa29823c51ba5bb2588
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Jul 3 10:32:47 2022 -0500

    ♻️ Encapsulate PID in class (#24389)

commit 678955949f980f2bfa942a1a8dc4542a20423bd1
Author: Victor Oliveira <rhapsodyv@gmail.com>
Date:   Sat Jul 2 21:31:27 2022 -0300

    🔨 Disable stack protector on macOS simulator (#24443)

commit 923d34550a828f483d73481242782715080ebc7e
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Jul 14 21:56:13 2022 -0500

    🔨 PlatformIO "--target upload" == "--target exec"

commit ed643e634fbd98d21e22fdcdf615532cc9cf0def
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Jul 14 21:03:11 2022 -0500

    🔨 Fix Warnings/settings force-recompile

commit 3f4c8c31c6c9c3e1d6871ab6bca86818db5697f1
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Fri Jul 8 22:45:17 2022 -0500

    Fix SDIO for STM32

    Followup to #24271

commit 171ed66de0a69b9811a636219f51792c3d59bf63
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date:   Sun Jul 3 09:08:43 2022 -0700

    🚸 MPCTEMP: Home before cooling (#24434)

commit 5f2e4487e75812d32ace4667bccb6efb6134bdb0
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date:   Sun Jul 3 08:08:40 2022 -0700

    🩹 Fix MKS TinyBee ADC Vref (#24432)

commit 80c7abd7271fcadacff8cf74c34184987f22f07d
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Fri Jul 1 04:49:37 2022 -0500

    🩹 Remove poison wchar_t macro

commit 814b53750fbc03ffc2572252474aca2f4bf043eb
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Fri Jul 1 20:10:51 2022 -0500

    🩹 Remove obsolete split_move

commit 23e93c51fd3a080c59ba0f5321a73eab0058873e
Author: Moonglow <fxdteam@gmail.com>
Date:   Fri Jul 1 05:51:55 2022 +0300

    🐛 Fix M149 (#24430)

commit afbdcc8eee9f3f13b1e3fe196728554ac8efdad7
Author: tombrazier <68918209+tombrazier@users.noreply.github.com>
Date:   Fri Jul 1 03:07:36 2022 +0100

    🚸 Vertical Max7219::quantity in portrait orientation (#24415)

commit 4820947203808400240898a487e4fa023f4976e1
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Jun 30 20:57:34 2022 -0500

    ✅ Update path to Ender-3 S1 configs

commit d44aef8b6b54d29446b796f78a868e4bffdef7db
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Wed Jun 29 20:16:16 2022 -0500

    📝 Index Mobo Rev03 => Opulo Lumen Rev3

commit c1c0496073b8c70728f237fb2a99fdae19c7bb4f
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Wed Jun 29 17:14:23 2022 -0500

    🩹 Fix memset block warning

commit a48831d600f9077c43c2c841fccdd76b154025e9
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date:   Wed Jun 29 06:24:22 2022 -0700

    🐛 Fix Axis Homing (#24425)

    Followup to 4520a51

commit c076094fa9eac463abe47fcf2921ed6d690ba3ee
Author: John Lagonikas <39417467+zeleps@users.noreply.github.com>
Date:   Wed Jun 29 01:53:05 2022 +0300

    🐛 Fix MAX31865 PT1000 normalization (#24407)

    Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

commit 57c137a60f8af6f777a2fc04fd4412844dd85c59
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Jun 26 22:30:05 2022 -0500

    ♻️  reset_acceleration_rates => refresh_…

commit 05bdc5640d20412d852730d77e0e42a8e0b6e2b4
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Jun 26 22:24:59 2022 -0500

    ♻️ Planner flags refactor

commit 83784bd8b7a53b21d828923e9f3dfd854b83610a
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Jun 26 22:32:00 2022 -0500

    📝  Note about UBL bad splits

commit 23f19e9ce8452cc21f4c5cf0a5a3a2784c7ac512
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Jun 26 10:01:22 2022 -0500

    🎨  Misc. shorthand operators

commit 0435b2220a695f40aaba29a6965f7406d9a30db9
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Jun 26 05:47:18 2022 -0500

    🐛 Fix Manual Move axis selection (#24404)

commit ab2fceda2c3b50ee1de99e3471197cb151f6d61b
Author: Shlee <github@shl.ee>
Date:   Sun Jun 26 06:56:57 2022 +0000

    📝 Add STM32F4 example, Ruby (#24399)

commit 88dc360e9d72a0f3461b7e1f2ddd2904df3e7abd
Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com>
Date:   Sun Jun 26 08:52:19 2022 +0200

    🌐 Update Italian language (#24398)

commit f5bdb8b4d23b1b6f50c91b74620c0b97c9531b10
Author: Roman Moravčík <roman.moravcik@gmail.com>
Date:   Sun Jun 26 08:51:16 2022 +0200

    🌐 Update Slovak language (#24397)

commit 3e01e0898953d4f00044904de324cb594c8c0541
Author: sgparry <sgparry@mainscreen.com>
Date:   Sun Jun 26 07:49:57 2022 +0100

    🩹 Fix LCD contrast with K8800 board

commit 4694a7fe7468b19600354d07115d5eaba6f6406a
Author: tombrazier <68918209+tombrazier@users.noreply.github.com>
Date:   Sun Jun 26 06:38:23 2022 +0100

    ✨ MAX7219 idle profiler (#24375)

commit 537af0bb035ec4d669a78187dc85cf598cdb2330
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Fri Jun 24 22:07:06 2022 -0500

    🌐 Drop unused delta strings

commit 0dc59311ec3ccbeb0643a3384adec7bb24496d18
Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com>
Date:   Tue Jun 21 22:09:24 2022 -0400

    🐛 Resolve DUE Servo pulse issue (#24305)

    Co-authored-by: sjasonsmith <20053467+sjasonsmith@users.noreply.github.com>
    Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

commit 0523874e9c121d629c06f9f0022dd6f85d442ae0
Author: tombrazier <68918209+tombrazier@users.noreply.github.com>
Date:   Sat Jun 18 05:17:12 2022 +0100

    🐛 Fix G2/G3 Arcs stutter / JD speed (#24362)

commit 106537ff432f8b2ad1c6aa0842af1b8a6236fea7
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Fri Jun 24 01:08:06 2022 -0500

    ✏️ 9-axis followup (sanity-check)

commit ad96c36730675989cff969acaac9b679e9e92792
Author: Bob Kuhn <bob.kuhn@att.net>
Date:   Thu Jun 23 23:58:26 2022 -0500

    🐛 Fix Lerdge build / encrypt (#24391)

    Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

commit a3629a7c28b216c4a789c2f6fa59e7828158ebc3
Author: Victor Oliveira <rhapsodyv@gmail.com>
Date:   Thu Jun 23 06:18:36 2022 -0300

    ✨ Classic UI BIQU BX (#24387)

commit b7e1b6b8933f3a10a5bf1ec76ca7797aa5af54b4
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Wed Jun 22 22:08:24 2022 +1200

    🩹 Fix DGUS (MKS) compile (#24378)

commit 253e35e066db5b3fd6cbcdab3ec6f93123ac81cd
Author: Victor Oliveira <rhapsodyv@gmail.com>
Date:   Wed Jun 22 05:33:03 2022 -0300

    🚑️ Fix BIQU BX touch freeze (#24383)

commit 831e1b5ecfc17482b2e324abd32b427121ef7d00
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Wed Jun 22 16:13:18 2022 +1200

    🐛 Fix M423 invocation (#24360)

    Followup to #23745

commit c89ca2deb890d3e9b7c37e34935b6fccf559d470
Author: tombrazier <68918209+tombrazier@users.noreply.github.com>
Date:   Wed Jun 22 03:45:22 2022 +0100

    🩹 LCD strings followup, fix warning (#24328)

commit 85e94038aa34c82910384083ab8cea2dd984e351
Author: DerAndere <26200979+DerAndere1@users.noreply.github.com>
Date:   Wed Jun 22 04:07:17 2022 +0200

    ✨ FOAMCUTTER_XYUV (for RAMPS) (#24325)

    Co-authored-by: Scott Lahteine <github@thinkyhead.com>

commit 7c85f250421058f7fed8d29be4a6b0f15e7ca922
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Wed Jun 22 10:33:25 2022 +1200

    🚑️ Fix SD mount bug (#24319)

    Co-authored-by: Scott Lahteine <github@thinkyhead.com>

commit eca5e46d17322c0c45e1bea90238edf180cd4cca
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Mon Jun 20 21:19:41 2022 -0500

    🎨 Simplify move menus with substitution

commit 78b42ed387d4eeb706df2f9eb717443a872a7eff
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Mon Jun 20 21:19:00 2022 -0500

    🎨 Use MAP for home axis items

commit 95339c9561a701ede6b159dfc91edd0afd169e63
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Mon Jun 20 21:17:29 2022 -0500

    🧑‍💻 Fix STATIC_ITEM_N arg order

commit da6c16a9cdea1589ac02c382f3d790da90d7b922
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Mon Jun 20 21:15:57 2022 -0500

    🎨 Fix comments, formatting

commit cc27cfb66007b3d575f7532f7ac1e4ae5f4fde53
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Wed Jun 15 20:02:32 2022 +1200

    👷 CI test without src filter (emulate Arduino) (#24335)

commit 25c0593c9b762bfd4aa6ff26a5cfc27d71188ac8
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date:   Mon Jun 13 19:04:49 2022 -0700

    👷 Use Biqu BX for CI test (#24331)

commit 5fff7bbef4057ec0714bbc5137b892f3ab9e2612
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Mon Jun 6 19:06:03 2022 -0500

    👔 Fix and comment use_example_configs

commit 3fd592e64b81238947282bafaae796a8599a277a
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun Jun 5 20:25:58 2022 -0500

    👔 Update Marlin actions for 2.1.x

commit c34dd64469fec8bcf712311296e0431815c894bd
Author: John Robertson <john@cirtech.co.uk>
Date:   Sat Jun 4 07:26:08 2022 +0100

    ⚡️ PWM for ESP32 I2S expander (#24193)

commit 7677368aafd21f03f9aa214696638a9714199c59
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Fri Jun 3 23:50:20 2022 -0500

    🔖  Moving to bugfix-2.1.x

commit ece124fdeafe6aad7c17703037c66930baf63a2b
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Mon Jun 20 21:08:31 2022 -0500

    🩹 M919 9-axis update

commit 9aa499dbe9d20567d08e5d5a3ce3c5cce6b1a7a8
Author: luzpaz <luzpaz@users.noreply.github.com>
Date:   Sat Jun 18 00:19:01 2022 -0400

    🌐 Fix LCD string, typos (#24324)

commit 78a3ea0ed4c53f2a4363c5548a78fa1e43cba162
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Mon Jun 13 20:43:23 2022 -0500

    🧑‍💻 Apply F() to some LCD / TFT strings

    Followup to #24228

commit c605c1ebb5f39cccb488946f1d04e8089e72da43
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Tue Jun 14 13:38:19 2022 +1200

    🩹 Fix missing ProUI cpp wrapper (#24313)

commit b2c4fb5f3a7dbe3d35f72d645e5a7fa961545e17
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Sat Jun 11 17:03:20 2022 +1200

    🐛 Fix JGAurora A5S A1 build (#24326)

commit 60cedf63f2bccd25c686d954e2d079040bf8ca80
Author: Steven Haigh <netwiz@crc.id.au>
Date:   Sat Jun 11 12:08:55 2022 +1000

    🩹 Fix ProUI compile (#24310)

    Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

commit 1156557a4747864ce4c6c6f04d8ac80fee0cd9f8
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Thu Jun 9 00:51:47 2022 -0500

    🧑‍💻 Misc. servo code cleanup

commit ea22640d78a11ae11d7caef894898532d5c5ffd8
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Thu Jun 9 00:51:08 2022 -0500

    🧑‍💻 Remove servo macros

commit d886320799693135a41ebd27e366e92254ef6b06
Author: lujios <83166168+lujios@users.noreply.github.com>
Date:   Tue Jun 7 02:22:17 2022 +0200

    🩹 Fix G33 Delta Sensorless Probing compile (#24291)

commit a65189c637e9fd7ee6285d1d51a13bc0e1d0773d
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Mon Jun 6 19:06:03 2022 -0500

    👔 Fix and comment use_example_configs

commit dfc8acf376cda37c0b652f04a1cc44832b3c775d
Author: tombrazier <68918209+tombrazier@users.noreply.github.com>
Date:   Tue Jun 7 01:23:55 2022 +0100

    🩹 Fix Mesh Leveling + Debug compile (#24297)

commit 48d03ca0a9bc89a9f35b306a526a18308f040802
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Tue Jun 7 18:59:21 2022 +1200

    🩹 Media Change followup (#24302)

    Followup to #24015

commit 85e8d1f9fa7340e34587ffb83ac02790c7f68a22
Author: Miguel Risco-Castillo <mriscoc@users.noreply.github.com>
Date:   Mon Jun 6 00:01:06 2022 -0500

    🚸 ProUI G-code preview, PID plot (#24282)

commit 679f4608ab94743c9478eb3e2035c097d6729b91
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Mon Jun 6 23:38:06 2022 -0500

    👔 Update mfconfig import

commit 5c225ba88720e3dd6cd26cd6989dbb26f9e52be8
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Tue May 31 18:44:57 2022 -0500

    🔖 Marlin 2.1

commit 268511933287d618807ce441c1eb484e090da5a9
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Wed Jun 1 05:21:59 2022 +1200

    🩹 Fix EXTRUDERS 0 manual move compile (#24255)

commit fc350701b2a5436c4a18650844d4270dc9337cba
Author: tombrazier <68918209+tombrazier@users.noreply.github.com>
Date:   Tue May 31 18:01:59 2022 +0100

    💥 More M306 M => M306 H (#24258)

    Followup to #24253

commit 0ad695d45ac9334f0502b391f7a3f4122a3b55cd
Author: Miguel Risco-Castillo <mriscoc@users.noreply.github.com>
Date:   Sat May 28 17:34:36 2022 -0500

    🚸 Fix, improve, update ProUI (#24251)

commit f1802bc7febd26fca1594c0b5aa54cbf5fc19b1f
Author: elimisback <elimisback@gmail.com>
Date:   Sat May 28 16:22:59 2022 -0400

    🔨 BTT STM32G0B1RE xfer build (#24245)

commit d6c673b9de287f4102d3efdfe09a31662361aa6e
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu May 26 18:31:05 2022 -0500

    ♻️ More updates for multi-axis

commit 6a2a592c26c000aa656bdd10ee5dfe9fdc5330fd
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Mon May 23 21:59:36 2022 -0500

    🧑‍💻 Combined axis strings

commit c4ac695c15028b856bf3979c22f73bef9901dc90
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun May 22 17:45:07 2022 -0500

    🧑‍💻 Forward-compatible axis strings (167672d, #24259)

commit 8465818754884c6aeed668a6f9eed31196aa00ba
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date:   Sun May 22 14:32:16 2022 -0700

    🎨 Fix/adjust warnings (#24225)

commit 3c482a9ba11e3fc86f55da1073ce41d6b8023e53
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun May 22 16:08:29 2022 -0500

    🧑‍💻 MAP macro for axis lists, etc. (#24191)

commit ecfe7b640096c8c9c2bc6bfe675570b46fa499e3
Author: DerAndere <26200979+DerAndere1@users.noreply.github.com>
Date:   Mon Apr 18 06:03:39 2022 +0200

    🩹 Fix some parameters w/out values (#24051)

commit 85599abba7a0fb7c1700e3be2279120d5c02d673
Author: DerAndere <26200979+DerAndere1@users.noreply.github.com>
Date:   Mon Apr 4 04:43:42 2022 +0200

    🚸 Better M350, M114 with more axes (#23986)

commit 494a2fc80c19c4a82abeb7eb39ff3c9f508c6286
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sat Jan 1 17:49:54 2022 -0600

    🚨 Fix some compiler warnings

commit f7bea2846f65e9cc332a85eaa590cbcbfc448ea5
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Apr 3 20:13:11 2022 -0500

    🏗️ Axis name arrays

    Co-Authored-By: DerAndere <26200979+DerAndere1@users.noreply.github.com>

commit d56731cd0796639b4847868607dda65885c21ed0
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Apr 3 20:52:27 2022 -0500

    🏗️ Extend AXIS_CHAR to include E

    Co-Authored-By: DerAndere <26200979+DerAndere1@users.noreply.github.com>

commit 0041de1a8a1176bbdfccd19b81faecc049c43c0c
Author: DerAndere <26200979+DerAndere1@users.noreply.github.com>
Date:   Tue Apr 19 05:15:15 2022 +0200

    💥 Update Motor Current G-codes for extra axes (#23975)

commit d58497bc8ee72ee44891a3f6f9c1735ca6b43e9e
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Sat Apr 23 21:16:15 2022 +1200

    🐛 Fix BACKLASH_COMPENSATION compile (#24072)

    Followup to #23826

commit fd13a928c1a1692dc695a1f5edfe4b70d076121d
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Fri Apr 29 15:21:15 2022 -0500

    ✨ Support for up to 9 axes (#23112, #24036, #24231)

commit 369542db3bb34c28196a77838a2f018180a7da74
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat Jun 4 00:23:43 2022 -0500

    🔖 Marlin 2.0.9.4

commit 40d96c3460117eeab1742d74c2d78b57b4a9a1b6
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun Jun 5 20:26:40 2022 -0500

    👔 Remove actions from misc. branch

commit d7a71beaf4f08e60c3d13049f1046bbb663c643d
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Fri Jun 3 18:16:43 2022 -0500

    🔧 LEVEL_BED_CORNERS => LCD_BED_TRAMMING

commit f3b593ae73b5d21b5c270a5f5ede0fe982822b07
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Tue May 31 12:43:44 2022 -0500

    🎨 Fix spelling, whitespace

commit 1d8d8dccf45d2090e075b148d4f08e299184392c
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Fri Apr 29 15:21:15 2022 -0500

    💥 Num Axes / Multi-Stepper based on Driver Types (#24106, #24120)

commit 1e127a93c4c1446cf11aacecc9597a7355262ac8
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat Jun 4 00:15:23 2022 -0500

    🧑‍💻 Extend LCD string substitution (#24278)

commit fcef8d946cbd45e27ba9888f1e18327b68d52b00
Author: lujios <83166168+lujios@users.noreply.github.com>
Date:   Fri Jun 3 07:19:25 2022 +0200

    ⚡️ Improve Sensorless homing/probing accuracy for G28, G33, M48 (#24220)

    Co-Authored-By: Robby Candra <robbycandra.mail@gmail.com>
    Co-Authored-By: ellensp <530024+ellensp@users.noreply.github.com>

commit 0253500ccd5a7192f3e545cb5552c4ab7b309c5d
Author: Tanguy Pruvot <tanguy.pruvot@gmail.com>
Date:   Wed May 25 08:07:11 2022 +0200

    Use default null args in select_screen

commit 0d783a76907ace17f0d61ebe8882ebee9bc6ce3b
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Thu Jun 2 21:22:09 2022 +1200

    🐛 Init Stepper SPI before PSU Control (#24269)

commit e784e0413204680f3c8f3a8cdf519fb5bee7a164
Author: BIGTREETECH <38851044+bigtreetech@users.noreply.github.com>
Date:   Thu Jun 2 17:02:06 2022 +0800

    ✨ BigTreeTech SKR3 - STM32H743 (#24271, #24272, #24275)

    Co-Authored-By: Alan.Ma <alansayyeah@gmail.com>

commit 11d68e31274fccd20c8bb72eec0b4ad547962823
Author: bryan065 <30362590+bryan065@users.noreply.github.com>
Date:   Thu Jun 2 04:51:39 2022 -0400

    🚸 Custom Menu Items for JyersUI (#24270)

commit 8b8b2a7ed35908b6a49d5b3badb230d3283792bb
Author: ledzepman71 <ferdinandpc@hotmail.com>
Date:   Thu Jun 2 02:49:48 2022 -0600

    📌 Tenlog PSU pin (#24266)

commit fc1a620b878b45675b9a7972be6c1fb2882b8092
Author: tombrazier <68918209+tombrazier@users.noreply.github.com>
Date:   Sat May 28 23:40:08 2022 +0100

    🚩 MPC update (#24253)

commit 9799907dc9a53810e87fd5b54e2194d30e70eff8
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date:   Tue May 31 14:28:01 2022 -0700

    👔 Configs required to submit a Bug Report (#24256)

commit 6fc4dbbbc4b3b1e6820f4f18b81602451bb1786c
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat May 28 17:05:09 2022 -0500

    🚸 Change M201 G to S

commit 74596ad4d7f9117e06829b5657d7402f27a445ce
Author: Robby Candra <robbycandra.mail@gmail.com>
Date:   Mon May 23 09:13:17 2022 +0700

    🩹 Adjust manage_media for slow/late media init (USB FD) (#24015)

commit 28f8646aa64b8baf6f93197d04b0802580272e40
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun May 22 19:56:46 2022 -0500

    ♻️ Apply F() to more LCD code (#24228)

commit 9a74bcd4cf13efa2d7cfb365182d7e097eaa1f1d
Author: John Robertson <john@cirtech.co.uk>
Date:   Tue May 31 23:09:44 2022 +0100

    ✨ Laser Safety Timeout (#24189)

commit 07cd248b91a59db8e2bc7ad10bbf160852af34fb
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun May 22 20:45:37 2022 -0500

    ♻️ Move watchdog to MarlinHAL

commit 209c792ef7e97dc48bf3517c9f8f56e6be80e97f
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Fri May 20 11:27:09 2022 -0500

    🔧 Remove LCD_SERIAL_PORT defaults, warn on auto-assign (#24170)

commit dbd00d992705a07b3da769549495d6505cb96b43
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Mon Apr 4 15:57:03 2022 -0500

    ✨ DOGM Display Sleep (#23992)

    Co-authored-by: borland1 <barryorlando@hotmail.com>

commit 4ae54a6229d1704bfc54a85233af40b69e924246
Author: Ludy <Ludy87@users.noreply.github.com>
Date:   Mon Apr 18 11:43:34 2022 +0200

    🐛 Update German language, Fix FTDI (#24047, #24048, #24227)

commit ce0af56d0aa4371620b142ba5b2ed3b455813a5d
Author: tombrazier <68918209+tombrazier@users.noreply.github.com>
Date:   Sun Apr 10 07:20:05 2022 +0100

    🚸 Improve MPC tuning, add menu items (#23984, #24018, #24049, #24059)

commit 6c557a248016f2e89e259d2d5ee8e000521099bb
Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com>
Date:   Mon Apr 4 01:44:45 2022 +0200

    🐛 Fix Bed/Chamber PID Autotune with MPCTEMP (#23983)

commit a6ce9bf559d963c3cdcb6db7f57a572bc58016ea
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Apr 10 03:58:58 2022 -0500

    ✨ Autoreport Redundant Sensor option (#24014)

commit 21c838cb1b86c3ffd5958c68d82f6c0c25e78dbe
Author: tombrazier <68918209+tombrazier@users.noreply.github.com>
Date:   Fri Apr 1 08:14:14 2022 +0100

    ⚗️ Temperature Model Predictive Control (#23751)

commit 3443a9e18bf2c9797037f141d68ab409d6b3c00b
Author: Pauli Jokela <pauli.jokela@didstopia.com>
Date:   Thu May 12 05:23:16 2022 +0300

    ✨ SOUND_ON_DEFAULT option (#24102)

commit b2b5b85045e689d311e472d803817e08b49ccaec
Author: Robert Brenckman <Robbery525@gmail.com>
Date:   Sun Apr 10 01:24:07 2022 -0400

    🐛 Fix Tool Change priming (#21142)

commit 2086cc9f4e21dfc060c1ff034856ad4e6219f5f8
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Wed May 11 23:37:40 2022 -0500

    📝 Refer to 'PROGMEM' as 'flash'

commit 8eccfd4a6f90da93a4f13b8aa7fbd88a1f8cca46
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Wed May 11 23:35:38 2022 -0500

    🔧 Bed/Chamber PID Autotune menus

    Derived from MarlinFirmware/Marlin#23983

commit 9ab654adcb15ba23b42ed1f13ca34130e422dbc2
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Fri Jun 3 22:06:32 2022 -0500

    🐛 Fix min/max temp evaluation

    Fixes #24257

commit 0ae982188c23ddab4e3a2d819c679166a7e19532
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Wed May 4 23:19:18 2022 -0500

    🐛 Fix M203 report

commit bed0788f723a0695726eab52e8da0b48298c619f
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Thu Jun 2 21:28:07 2022 +1200

    🩹 Fix G60/G61 debug code (#24231)

commit deb1ba73bbdd3aacaeec6c7d9540c41e93ddfdfe
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat May 28 15:11:43 2022 -0500

    🎨 Use pos.set method

commit 57f0ac88af9e8c5eb398c8367edf471900a5171f
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat May 28 14:41:50 2022 -0500

    🎨  Misc. boards/pins cleanup

commit 915bce495cdc5168c982274f6deabc92e052c2c7
Author: Simon Pilepich <simon.pilepich@gmail.com>
Date:   Sat May 28 08:08:24 2022 +1000

    📝 Fix Mightyboard MOSFET comments (#24183)

commit 800a936caae83f4e5ca5dd2c2660518bd6fc43b2
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu May 26 18:18:41 2022 -0500

    🎨 Combine serial echos

commit ccf39b1c42fa787f645fbf0ac075cc47b72b18d3
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Fri May 27 12:02:42 2022 +1200

    🔨 Add src_filter for I2C_AMMETER (#24242)

commit d19179ce281cec58865fcbc99185abeb48a611b9
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date:   Thu May 26 16:07:10 2022 -0700

    ✏️ Fix some motherboard checks (#24238)

commit 4a6ae1b64df5fa8824e20688399683bf11b840e2
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Wed May 25 08:31:29 2022 +1200

    🎨 Remove MKS custom pins, TinyBee cleanup (#24186)

commit 0daaef589c956d152c846760dfc157fdd1b7975b
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Wed May 25 07:49:57 2022 +1200

    📌 Use MarlinSimUI/bugfix-2.0.x (#24232)

commit 4831cbebd80d6e2c6bcf504446cf6d0f2441c285
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Mon May 23 02:37:28 2022 -0500

    🎨 Add EXP1/2 headers, adjust TFT pins (#24230)

commit e0deb75764938995e32bc589d646ec397c4a3019
Author: tombrazier <68918209+tombrazier@users.noreply.github.com>
Date:   Thu May 19 22:15:15 2022 +0100

    🐛 Fix Leveling apply/unapply (#24188)

    Co-authored-by: Scott Lahteine <github@thinkyhead.com>

commit a0fe4f48956299cb298e6e48255ea72ba93dad79
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat May 14 15:31:51 2022 -0500

    🎨 Minor HAL cleanup

commit 4d65d7f142882bcd77072fc7dc5c01ca937a2e81
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date:   Sun May 22 19:32:28 2022 -0700

    📝 Add logo, helpful links to README (#24226)

commit 1b879f0ee4e5539c237edf235b6ca38b5b2beb43
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun May 22 18:42:25 2022 -0500

    🔨 Fix mfprep string test

commit b6abc760cef73a1dfc0e186f40687d0a45c8a769
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat May 14 01:45:14 2022 -0500

    🔨 Move, tweak maple envs

commit 0ae061713c631d44cd12ad266ca9c7fdd856d72c
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date:   Fri May 20 09:48:34 2022 -0700

    👔 Move GitHub templates, update README (#24199)

commit 1d12e72bf697f7e3cb63995a20ba9e98fbce3eb9
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun May 22 16:53:12 2022 -0500

    🐛 Fix SEGMENT_LEVELED_MOVES with UBL

commit c97cf10956ee33c80e557fb09e4cc75d30a0db82
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat May 21 19:29:59 2022 -0500

    🩹 Fix const warning

commit b72f9277e9e89a7dcdc12c8f11273f7c76a064d4
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu May 19 06:05:52 2022 -0500

    ♻️ Common Bed Leveling object name, accessors (#24214)

commit 06c4a9acdb3f08a2052ea55d00fa350e9249bcb4
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date:   Sat May 21 16:13:00 2022 -0700

    🐛 Fix FLSUN Hispeed FIL_RUNOUT_PIN, MKS Robin Mini TFT pins (#24204)

commit 8a301196e11d87d7e9db065d0d802910a664c5be
Author: Arthur Masson <arthur.sw@gmail.com>
Date:   Sat May 21 21:45:30 2022 +0200

    🐛 Fix Polargraph G92 command (#24223)

commit 1e7219f4a643f8cbdbcd9685ebb5a76d02c89601
Author: Marcio T <mlt4356-github@yahoo.com>
Date:   Thu May 19 09:45:48 2022 -0600

    🐛 Fix FTDI_EVE_TOUCH_UI reboot loop (#24195)

commit 02c267f542223ed0d8b098da4bec6f09710d6bc8
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Fri May 20 02:15:57 2022 +1200

    🔨 Require PIO >= 6.0.1 (#24205)

commit fe77fc66c0004ba9a4459dd5a12c978dd0308bb1
Author: Ivan Kravets <me@ikravets.com>
Date:   Wed May 18 00:47:11 2022 +0300

    🔨 Use PlatformIO Core 6.0 Dev for CI (#24194)

commit 268a16b1ef1c5cd462e81aef08e4e9f7d2c65658
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Tue May 17 15:05:25 2022 -0500

    🚸 ProUI APRIL2022 updates (#24084)

commit 8351b1431f8bad178f2f8a3ec70b32a1d4d7ca2c
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Tue May 17 20:01:32 2022 +1200

    🩹 Fix MarlinUI allow-cold-extrude (#24176)

    Co-authored-by: Scott Lahteine <github@thinkyhead.com>

commit 718806761f1e9d903d61408e2039357bfe46fff8
Author: Oliver Jean Eifler <olli.eifler@gmail.com>
Date:   Tue May 17 06:23:03 2022 +0200

    🩹 Suppress ZERO() warning (#24178)

commit 78c7fedcea34f0c630f8e9fd46bc5d3244de04c5
Author: Marcio T <mlt4356-github@yahoo.com>
Date:   Mon May 16 20:45:47 2022 -0600

    🐛 Fix Due cli/sei (#24182)

    Followup to #23357

commit c4b8339b842958faae2567c339bcf9b44434a2ce
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Fri May 13 23:49:29 2022 -0500

    🎨 HAL_MinSerial.* => MinSerial.*

commit 94ed67e36ef84cb4ecd8f3f1470041d4d72f7088
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date:   Fri May 13 17:50:42 2022 -0700

    🩹 Run TMC test last in setup (#24160)

commit 03b819bdb235c6eb2cd0a02b832bb8f108cc5962
Author: Miguel Risco-Castillo <mriscoc@users.noreply.github.com>
Date:   Fri May 13 19:34:30 2022 -0500

    🚸 DWIN/DACAI for Creality 4.2.3 (#24132)

commit 2204f05dcaabf0e639f1e1722ffd293d4b415fe3
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Fri May 13 19:31:07 2022 -0500

    🧑‍💻 Clarify MSerialUSB, drop HardwareSerial workaround

commit a13cceaad16dd2caedbf3b05ae0854b1200cb51e
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date:   Fri May 13 17:27:13 2022 -0700

    🚸 Improve MKS SGEN_L V2, Robin Nano V3 pins (#24147)

commit 5c25ed60c80d7b06cb91e91f98b1aca6bc648d79
Author: Dominic <91095348+d0m1d@users.noreply.github.com>
Date:   Sat May 14 02:18:04 2022 +0200

    🐛 Fix AIR_ASSIST (#24162)

commit 1c516bdd5e71fc3da05fb52da692c9c5ccb0c0d7
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date:   Fri May 13 17:17:19 2022 -0700

    🔧 Allow board & probe dummy thermistors (#24165)

commit 425684e2ffecf85dccab1eb4242772bc97992eb8
Author: grauerfuchs <42082416+grauerfuchs@users.noreply.github.com>
Date:   Fri May 13 20:08:50 2022 -0400

    🐛 Fix Mightyboard LED pin, fan override (#24168)

commit 63aecad7eef034d8cb2b3e81f8a22db8a148b90b
Author: Roxy-3D <Roxy-3D@users.noreply.github.com>
Date:   Fri May 13 17:29:50 2022 -0500

    🔨 BTT Octopus ST-Link programming/debugging

commit dcd769b4a18bd40f9664262d081d553994d8eb78
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Wed May 4 15:14:31 2022 -0500

    🎨 Nextion cleanup

commit f9b7f00d1e1c1004e0c2a9c35e23c1c67dc47172
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Wed May 4 19:10:14 2022 -0500

    🚚 Move speed_lookuptable.h

commit a6ff63d5060c0ef68c2ae9f6ccf3bcada2ec6b6e
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date:   Thu May 12 22:41:38 2022 -0700

    🎨 Clean up warnings / extra check (#24163)

commit 7d37ae2b2b1ea6613dbc8be0ec5fa30dbd6a87de
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Fri May 13 16:07:27 2022 +1200

    🔧 AVR/DUE Serial Port pin conflict checks (#24148)

    Co-authored-by: Scott Lahteine <github@thinkyhead.com>

commit a7d40ec654a3eca783a19e93e7bb6f394f2e6d29
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Thu May 12 20:09:25 2022 -0500

    ✨ Add BOARD_CREALITY_V24S1_301F4

    Co-Authored-By: Miguel Risco-Castillo <mriscoc@users.noreply.github.com>

commit 7ed339cfa0a2d8298e0293cf465daaf4ac74c0f9
Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com>
Date:   Thu May 12 06:38:05 2022 -0400

    ✨ Creality CR-10 SmartPro (#24151)

    Co-authored-by: Scott Lahteine <github@thinkyhead.com>

commit cb4ad020af2f56dc060ecafdfd58b0639a8f0199
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Thu May 12 20:13:59 2022 -0500

    🧑‍💻 Misc. LCD cleanup

commit 0805f9bf3f631d914bb6ff4817d65a9ab237fe6c
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Thu May 12 20:23:32 2022 -0500

    🩹 Fix ProUI leveling start message

commit d235bc9e1c5eeb210275a4abcf89a757d0259cc0
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Apr 3 16:14:02 2022 -0500

    🧑‍💻 General and Axis-based bitfield flags (#23989)

commit d5f472a6cf4456bf715ee3b3a85132f3fbe7e15f
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Thu May 12 00:07:22 2022 -0500

    🔨 Fix g++ locator for CI

commit d67fa98cf601a8ef2642641a8aefbcdab1d5bcc2
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Thu May 12 04:16:31 2022 -0500

    🩹 Fix accel dividend

commit d3fe0caa7f83b8e971e8503b5344e20811d6c812
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Mon May 9 18:50:14 2022 -0500

    🧑‍💻 Clarify acceleration factor

commit bd09f8acff3c40fe9294cfc6b6a9220ec5b766fc
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Mon May 9 17:35:32 2022 -0500

    📌 Define RAMPS_SMART EXP headers, AZSMZ_12864

    See #23501

commit a9aca5f5e8c5c1ce40e09ce5cf80a875ec009aa0
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Mon May 9 16:47:04 2022 -0500

    ✏️ Fix spurious UTF

commit 13d1eb7241b8621267520e57811f8069b2e466e9
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat May 7 23:51:38 2022 -0500

    🔨 OpenOCD Debug for VSCode

commit 238ab1dd061145a525edd27bb8203ae216380894
Author: Mike La Spina <mike.laspina@shaw.ca>
Date:   Mon May 9 17:18:47 2022 -0500

    🩹 Fix Fan Tail Speed Init (#24076)

    Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

commit a7e4061d1221531340e9f82bc6f1560e5d6feab8
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date:   Sat May 7 19:58:57 2022 -0700

    🔧 Fix Neo RGB sanity check (#24146)

commit 31c87adba80d50a90ae3c85b08cd01c5545c78b4
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Sun May 8 14:57:13 2022 +1200

    📌 Use ESP3DLib master branch (#24140)

commit 727e7e7fd71fb0404e0f5bf7f36dc10419d155c4
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Sun May 8 14:56:09 2022 +1200

    ✏️Fix Markforged endstops/G38 (#24141)

commit 975b90c0b7e6b836f67f3603c80f818dc095ffa5
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sat Apr 23 06:18:56 2022 -0500

    🎨 Tweak NEOPIXEL_LED format (#24110)

commit 8f0180802ad327a0be47be9405a9a2764b5937db
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Thu May 5 11:47:08 2022 -0500

    🔧 Move LASER_COOLANT_FLOW_METER to LASER_FEATURE

commit aa4c9917552df8a383816a0af516b86e1237ff48
Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com>
Date:   Fri Apr 1 04:22:26 2022 +0200

    📝 Obsolete freeze comment (#23964)

    Followup to #23944

commit 9ab1a57d729cfa207adfe3ee6d24d40de3bb159c
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sat Apr 23 05:00:46 2022 -0500

    ♻️ Consolidate DGUSScreenHandler class (#24067)

commit 044bf8ab7ef7045583c9da175b8ebddd2b750f84
Author: Robby Candra <robbycandra.mail@gmail.com>
Date:   Sun Apr 10 07:44:31 2022 +0700

    ⚰️ Clean up dead option (#24006)

commit 4bdec5e99330a35387c09adc27be94c5082b4405
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Fri Apr 22 01:12:43 2022 -0500

    🚸 More ExtUI events for ABL / UBL

commit 7444933d5d4fc93c6278e091be5af7e4f61b1d9c
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Apr 21 02:26:17 2022 -0500

    🩹 Fix ESP32 servos, SD_IGNORE_AT_STARTUP

    Fixes #24007
    Followup to aaf5bf02

commit f35404f853ba185814bd17a4742ef34688ceba98
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Apr 17 21:18:39 2022 -0500

    🧑‍💻 Handle PLR in manage_media

commit 7fa2dceddafcfeea4b2599fa2b9fe3542abd4c1f
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date:   Tue Apr 19 17:16:26 2022 -0700

    🐛 Fix ProUI / JyersUI leveling preheat (#24060, #24064)

    Co-Authored-By: Scott Lahteine <thinkyhead@users.noreply.github.com>

commit 4c84769a814ab6534a1edebc66529b568c9d6d7e
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Apr 10 06:31:39 2022 -0500

    🩹 Fix ADVANCED_PAUSE_RESUME_PRIME check

    Fixes #23824

commit 8fb3074901f83034cc240834a2fc75aad0ed43ad
Author: Robby Candra <robbycandra.mail@gmail.com>
Date:   Fri Apr 15 11:21:12 2022 +0700

    🩹 Fix DEBUG_CARDREADER (#24023)

commit 230db90b70f1cafdea6fe3a8c28499e92004be53
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Fri Apr 22 23:02:47 2022 +1200

    🩹 Fix DGUS_PREHEAT_UI enable with DGUS_LCD_CLASSIC (#24066)

commit 28d2bc353ebbddc0ce0b96a634108392eb1089b4
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sat Jan 1 16:48:24 2022 -0600

    🎨 Use LEDColor default C-CTOR

commit 7b5e2cd78619ba4334c0fe94b3f8293ed8d6e1ee
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Wed Apr 20 00:52:05 2022 -0500

    🐛  Update M913, M914 report

    Followup to #11248, #11249, #23400

commit 4b456078ddc1099c081e1e7149aba612c8f41008
Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com>
Date:   Mon Apr 11 02:23:53 2022 +0200

    🌐 Update Italian language (#24019)

commit 8d3c84a6d969bf9fa576a17b0054d5b98324622d
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date:   Sat Apr 9 17:21:42 2022 -0700

    ✏️ Fix FYSETC Mini Panel neopixel type (#24011, #24111)

commit cbc6f23a8af0c864e3607dc24764582149c0d1f3
Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com>
Date:   Mon Apr 4 01:49:51 2022 +0200

    🔧 Sanity-check SWITCHING_TOOLHEAD_X_POS (#23985)

commit bed8abe5b6df751d7dafc6f0f8d8dff7338625ce
Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com>
Date:   Sun Apr 3 01:27:05 2022 +0200

    🐛 Fix PID edit menu for Bed, Chamber (#23987)

commit 74565890f335f26fa7012d0164eb2964c0f2918d
Author: tombrazier <68918209+tombrazier@users.noreply.github.com>
Date:   Fri Apr 1 03:13:16 2022 +0100

    ♻️ Refactor and fix ABL Bilinear (#23868, #24009, #24107)

commit 4ec9af42b8e24cf6ce9f238c9342bc1c11120429
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Tue Mar 29 03:38:25 2022 -0500

    💥 Rename ExtUI settings methods

commit b0d621d8b96fffda485efa45e61a68126613a766
Author: John Robertson <john@cirtech.co.uk>
Date:   Mon Apr 4 00:47:55 2022 +0100

    🧑‍💻 Define isr_float_t to assert a non-FPU float (#23969)

    Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

commit 995221e68e15693697fc7f10dfc31273ea188157
Author: Stephen Hawes <sphawes@gmail.com>
Date:   Thu May 5 03:37:47 2022 -0400

    ✨ Add M3426 A<addr> parameter (#24130)

    Co-authored-by: Scott Lahteine <github@thinkyhead.com>

commit 54e543872be13439523cecb6b670b7b4bf818164
Author: LPRtypeCN <1297207734@qq.com>
Date:   Sun Apr 10 19:19:12 2022 +0800

    🌐 Update Chinese language (#23865)

commit 7b39604d6f58b46de18a41eb4a7de5058d9c4b35
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Mon Apr 4 11:46:05 2022 +1200

    🌐 Update Russian language (#23978)

commit 01c9c2666123f0959b02b757d2acd6adc18f4284
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date:   Mon Apr 18 03:46:58 2022 -0700

    🧑‍💻 Preheat menu improvements (#24017)

    Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

commit 27b148442826780c8fc4f7ab8c21608de21f0587
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Tue Apr 19 15:03:42 2022 +1200

    🐛 Fix Manual Move cold extrude override (#24045)

    Followup to #19606

    Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

commit 7f1c5ad7aa6dc437d3a76abf8a36cb971e1f424e
Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com>
Date:   Sat Apr 9 20:19:14 2022 -0400

    🩹 Fix and clean up E3V2 draw (#23979, #24013)

commit 4fd7d1b056bfab9f31c272ae6d8f256ed2ed202d
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Thu Apr 21 21:06:22 2022 +1200

    🐛 Fix STM32 Pins Debugging (#22896)

commit 7ffe4de021254d34762d2a7ecd239ded0eca949d
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Apr 10 07:39:50 2022 -0500

    🩹 Use LCD_CONTRAST_INIT in pins files

commit eada17ed69ede29d83f7c3897d64e2872faaae18
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Apr 10 01:49:59 2022 -0500

    🩹 Apply 100% leveling correction below the bed

    See #24002

commit cd5c5ea60eb20d643ab2447bc3550b3eb5874a39
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Apr 10 03:44:45 2022 -0500

    🔨 Fix LPC176x debug build

    See #23635

commit e9ea82e78d0c95ef1cee599093b4c91a6f97d709
Author: stream2me <32234535+stream2me@users.noreply.github.com>
Date:   Sun Apr 10 02:46:29 2022 +0200

    🐛 Prefer os.replace, fix TFT_LVGL_UI build (#24001)

commit 18b17fc97d8474b2fe5c5cd7afcfdce05ba7d5cc
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Sat Apr 23 22:02:13 2022 +1200

    🐛 Fix MKS_MINI_12864 build for ESP32 (#24071)

commit 89d5ed0c9e5570e4a025719a9ad183e505c8ed8a
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Tue Mar 29 04:22:04 2022 -0500

    🎨  Combine common LPC1768 I2C code

commit a56bf9045d3e68101c42ced30884fa34675279c5
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Fri Apr 15 02:05:02 2022 -0500

    🧑‍💻 Simplify BIGTREE_SKR_2_F429 env

commit c23d0351495a7fc1c396d157642db49db2754135
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Apr 10 08:43:11 2022 -0500

    🧑‍💻 Strip #errors in Configurations deployment

commit 7ff4b706947e63d708cef90c936b936305947e58
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Apr 21 07:07:04 2022 -0500

    🚸 Prevent accidental button press

commit 421c38ff2e0de3a8d5cd913232aa3448dbfbc487
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Apr 21 08:57:41 2022 -0500

    🐛  Home Z to Max after Z_SAFE_HOMING

commit ec447dba04409c2b60d61b9bacab54c101bd9f3a
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Apr 21 09:05:12 2022 -0500

    🚸  Home Y before X on belt printers

commit be6535e5f7a39529bd081ed38a1bf76fa645488f
Author: Christian Piper <42127153+CAP1Sup@users.noreply.github.com>
Date:   Thu Apr 21 03:15:07 2022 -0400

    🩹 Fix PRINTCOUNTER with EXTRUDERS 0 (#24063)

    Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

commit 99252cf0cd5a8a01228c715a505cb1eaf6b853e5
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Apr 21 08:58:45 2022 -0500

    🐛  Prevent BABYSTEP freeze

    See #22830, #13300

commit f6f31434b8c0e21f98fef460e0c8492fd4c240d5
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Apr 21 07:16:52 2022 -0500

    🧑‍💻 IS_ULTRA_LCD => HAS_WIRED_LCD

commit 2f3960904e1a7b830c686fa793b122de49f3d674
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Apr 10 03:45:28 2022 -0500

    🎨  Misc. USB flash code cleanup

commit 2dc4c642e78bb4fa99ca41f3ae3c92335248ffd4
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Apr 3 16:50:39 2022 -0500

    🎨  Misc. adjustments, spacing

commit 70ea0e7c3450680e1062088243d2cf139eadc02a
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Mon Apr 18 16:41:16 2022 -0500

    ✏️ Remove extra G29 line

    Followup to 85a62bbf

commit a81fd009f081eca3685e42cffac7f35e75428fea
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Apr 21 07:08:26 2022 -0500

    🎨  misc. cleanup

commit e667d4e6e43b407cedce6bbf543ea1d815e8d520
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Apr 3 16:53:39 2022 -0500

    🌐  Rename "LCD Timeout" string

commit 2d0af75d37c9ea8ab44c889ef4e489b3b533eb30
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Apr 3 18:07:40 2022 -0500

    ✏️ No such pin

commit 5e68a86968d63f97f0febb8378b2a508e909ec90
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Sun Apr 10 12:37:24 2022 +1200

    🔨 Preflight check old abl files (#24010)

commit 8bd1547c3bb16cdce37412624161fab5b9d5ead6
Author: Moritz Wirger <lj.moritorii@web.de>
Date:   Fri Apr 15 04:43:21 2022 +0200

    ✨ enwi ESPNP board support (#24029)

commit a5e083603f1435a4a0e2e9fa7449c9133aa73225
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sat Apr 23 06:11:03 2022 -0500

    📝 Fix 'M150 S' comment

commit c5f7547e8cf0d744fb1392b3651078d3985cecb1
Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com>
Date:   Tue Apr 26 05:03:16 2022 +0200

    🩹 Fix "elapsed" text on DOGLCD (#24087)

commit 5c5b380fda9f541ee182e614966fc39a72ac6a18
Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com>
Date:   Tue Mar 29 05:41:33 2022 -0400

    🐛 Fix MarlinUI on Ender 3 S1 (#23949)

commit bb0e0cf7f35cf3b89aac4f395185d55f3aa62979
Author: aegelsky <alexander.egelsky@gmail.com>
Date:   Fri Apr 1 05:21:10 2022 +0300

    🐛 Fix MKS Gen. L - EEB (#23965)

commit 5ee99dfc49eaa8e81f5beb66eb1c160ac2d217fb
Author: Jon <jon@mscreations.net>
Date:   Thu Mar 31 22:18:32 2022 -0400

    🩹 SKR2 Pins DIAG flag (#23968)

    Followup to #23050

commit a083b1280ec80a525766c0a9487865b76de64c81
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date:   Thu Mar 31 19:16:11 2022 -0700

    📌 SKR Mini V1.1 TMC UART Pins (#23970)

commit b7b5cee88baadfb10822b6bb13b6e7d3b0acaff8
Author: grauerfuchs <42082416+grauerfuchs@users.noreply.github.com>
Date:   Thu Mar 31 22:15:06 2022 -0400

    🐛 Fix MightyBoard Rev. E EX2, extra MOSFETs (#23976)

commit 7456fd68a41b12592f3ac3f47308f7037ca22b86
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date:   Sun Apr 3 14:13:29 2022 -0700

    ✏️ Fix NOZZLE_PARK_Y_ONLY sanity-check (#23990)

commit 20154718b5a41c1522a313ada06ef5c35ce2023d
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Wed May 4 17:03:25 2022 -0500

    🌐 Clean up languages

commit a6794c1862c663b387637597dba5f258a3e0e1e2
Author: Manianac <2092573+manianac@users.noreply.github.com>
Date:   Thu Mar 31 17:23:52 2022 -0700

    🐛 Use ADC_VREF for Filament Width ADC Vref (#23977)

commit bd5c6bf23c1478dcab31cc1c2edcd0fa546eb6ea
Author: John Lagonikas <39417467+zeleps@users.noreply.github.com>
Date:   Tue Mar 29 11:13:45 2022 +0300

    ✏️ Fix parking extruder compile (#23961)

    Followup to d3e3e6a491

commit 68ee64283a7aab95c2f70eaf734e24b9d909dfa7
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Tue Mar 29 03:48:37 2022 -0500

    🎨  INI cleanup

commit dd29394bbe17ab6458817cce65b94f106252092f
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat May 7 14:58:39 2022 -0500

    🔨 Improved mfprep script

commit ceb99e89a081d2230479e9bb7b63c23d14bf0b98
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Thu May 5 18:55:43 2022 -0500

    🔨 Prevent build attribute define conflicts

commit 6112277f9b2d24a7c9effeb5966dadef279a261c
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Thu May 5 19:11:59 2022 -0500

    🔨 Use first g++ in path for 'native' targets

commit 81f403025c3ddb479ccf363fb091ac0fcf8e667b
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date:   Thu May 5 00:38:48 2022 -0700

    🐛 Some EEPROM size fixes (#24113)

    Co-authored-by: Scott Lahteine <github@thinkyhead.com>

commit eeda8b451acb2a0ae96656876f6a7682d43aca1d
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Wed May 4 12:47:15 2022 -0500

    📝 Replace KB with K in pins

commit c7e8ba78576af230278a5662103acf421dc59bfd
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date:   Mon May 2 16:29:25 2022 -0700

    📝 Fix extraneous URL args (#24125)

commit 071e5c336a157ca39b75081b8cb4436a72af965e
Author: Ludy <Ludy87@users.noreply.github.com>
Date:   Mon Mar 28 03:20:54 2022 +0200

    🐛 Fix MMU2 buzz (#23950)

    Followup to #23943

commit be08d4c4f01e2c297365664bd3e0f7dc2b051fde
Author: David Forrest <drf@vims.edu>
Date:   Sun Mar 27 21:19:02 2022 -0400

    🔨 Fix Makefile GCC warning (#23957)

commit e99104a0040f58477809c9e2b9506fe2bcd94331
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Sat Mar 26 16:44:22 2022 +1300

    ✨ Configurable FREEZE pin state (#23944, #23948)

    Co-Authored-By: Scott Lahteine <thinkyhead@users.noreply.github.com>

commit edc4089121bcd96645b7be6bbd3dafa88c510ede
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Fri Mar 25 21:16:00 2022 -0500

    🐛 Fix pulldown sanity check

commit 3bce266ef7865a62b5e79c7c5c67a068bb5e4c20
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Sat Mar 26 14:03:43 2022 +1300

    🐛 Fix MMU2 buzz (#23943)

    Followup to 89a9c3a391

commit c89d0114acba957d63e894bc1a479ec10cb18a81
Author: Robby Candra <robbycandra.mail@gmail.com>
Date:   Sat Mar 26 06:34:20 2022 +0700

    ✨ STATUS_MESSAGE_TIMEOUT_SEC (#23135)

    Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

commit 0e693854d0c86fa0998a5d497607d42d6798f6ab
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Fri Mar 25 17:35:00 2022 -0500

    🚸 Clear "heating/cooling" message on temp reached

commit 9324132a401cf0ab3781c9992d607bd4f88ba086
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Fri Mar 25 17:09:55 2022 -0500

    🎨 Format, use status macros

commit 5632ad65f59710ca64e4abca99afa64cb99d559e
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Fri Mar 25 17:09:26 2022 -0500

    🐛 Fix status_printf alert level

commit eccbfbcede60922b95971e90bf3a1d7983a5fe39
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Fri Mar 25 17:04:06 2022 -0500

    🩹 Print English to serial out

commit 5ef4fb378e345e20d1fa3bdbc5312598dc571276
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Mar 24 20:29:50 2022 -0500

    ✏️ Encoder noise followup

    Followup to #23925

commit 21f0945d2cfada672756709bc420feb11768e687
Author: Oleg Belov <obelov@audiology.ru>
Date:   Fri Mar 25 02:12:35 2022 +0300

    📌 Custom cable for Mini 12864 V1 + SKR Mini E3 V3.0 (#23936)

commit b2a318af9a0c8e91b1f66a5576226b50b1b49f1b
Author: Serhiy-K <52166448+Serhiy-K@users.noreply.github.com>
Date:   Fri Mar 25 01:07:58 2022 +0200

    🌐 Update Ukrainian language (#23935)

commit 1c89c0470f2778f8051ff8514831138e64a2d9ed
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Fri Mar 25 12:06:28 2022 +1300

    🩹 Wrap endstop_diag.cpp (#23931)

commit 2ee4a667e1999839e61fa4c7d4e31a88d6e301d6
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Wed Jan 12 09:47:22 2022 -0600

    💡 Misc. cleanup, comments

commit f8e177a43efa3e7a173e2799562d354ab95544ab
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Tue Mar 22 20:39:53 2022 -0500

    🧑‍💻 Improve STATUS_BED_X

commit 9ac1c73041cbf4015b48d9d7a70a59e840a1d442
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Tue Mar 22 20:34:00 2022 -0500

    🎨 General cleanup, comments

commit 4a8b99d505584d1fa5eb71d588da1bb60c3a2878
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Tue Mar 22 22:22:08 2022 -0500

    🧑‍💻 EXTRUDER_LOOP macro

commit b094a3fc0d647f7daff7c4d97db32f9d41e4c11d
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Tue Mar 22 20:31:36 2022 -0500

    🎨 Clean up tool change with tool sensor

commit 2d99a608fd993fd5cb75223b72deadfc969a13c1
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Tue Mar 22 20:11:58 2022 -0500

    🔨 Fix 'mftest -s'

commit fba8805c0cd87845c80d9cd7738b94332a35e27b
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Tue Mar 22 20:11:10 2022 -0500

    🩹 Fix ADC math overflow

commit 039a22649f4e0201d7580b63c1a414450353438a
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Tue Mar 22 19:56:07 2022 -0500

    🧑‍💻 PIO --silent in build_example

commit ced0ad8e094baecf6e3ee8eaa36c61baaa5743fc
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Tue Mar 22 19:17:12 2022 -0500

    🎨 Apply _TERN where possible

commit 10a0c9a9b3d4070326954c5c2354cfd8ba490f0c
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Tue Mar 22 19:20:19 2022 -0500

    🔨 Suppress MMU2 resume_position warning

commit abfb0411809568970221281a3614e30970f0dfc1
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Tue Mar 22 19:08:00 2022 -0500

    🧑‍💻 Add neo.set_background_color(rgbw)

commit 72f207f4895d5db34f697cb203876405b98d89c8
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Tue Mar 22 18:53:42 2022 -0500

    🔧 Sanity-checks for PULLDOWN, SINGLENOZZLE

commit 7186037f20a2a2c57624e31c1e99adc37759c5f6
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Tue Mar 22 18:31:54 2022 -0500

    🔧 No Switching Nozzle with MMU2

commit b0a400da72f6752619a82246fac55a07a4e67f3c
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Tue Mar 22 18:14:17 2022 -0500

    🩹 No PE_MAGNET_ON_STATE without PARKING_EXTRUDER

commit cc4c2c2f98a1742d6b462481f74dacf5b5b93961
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Tue Mar 22 18:11:01 2022 -0500

    🔨 Allow I2CPE_ENC_n_INVERT set to false

commit 5dae8a67344cfeda3de6d40fcd14498542004fe9
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Tue Mar 22 15:30:29 2022 -0500

    🚸 Allow one servo with cutter on RAMPS

commit 05dea4e30a1768913ec7d1f38c65b9423200a558
Author: Fredrik Andersson <fredrikandersson@mac.com>
Date:   Mon Mar 21 02:14:45 2022 +0100

    ✨ Encoder button noise filter (#23925)

commit 7e88ee8c5cc87395e73c45bcd743f3ab0302773b
Author: Mark <niujl123@sina.com>
Date:   Fri Mar 18 12:49:47 2022 +0800

    📌 PandaPi V2.9 – Standalone mode (#23908)

commit cc8e485e1c55fb2fcdba7dc8f6b89041ed18e9ce
Author: John Robertson <john@cirtech.co.uk>
Date:   Fri Mar 18 03:21:53 2022 +0000

    ✨ ESP32 - Hardware PWM for fan, cutter, servos (#23802)

commit c7a2ecc31aa4def9e60668f5cfc648d87776be9b
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Fri Mar 18 16:17:41 2022 +1300

    🩹 Fix xatc EEPROM debug (#23911)

commit 260b40d1453a9310581c45d3e1327a3103b36a22
Author: tombrazier <68918209+tombrazier@users.noreply.github.com>
Date:   Fri Mar 18 03:15:26 2022 +0000

    ⚡️ Fix noisy ADC - 16x oversampling with 12-bit ADC (#23867)

commit c87eded8f6183c33bd9b9a74dd577fe6c77c32df
Author: Ludy <Ludy87@users.noreply.github.com>
Date:   Fri Mar 18 02:55:33 2022 +0100

    🩹 Fix redundant var declaration (#23913)

commit 2f2a999368f22f2c6b3105ab481987c2025bc50e
Author: John Robertson <john@cirtech.co.uk>
Date:   Thu Mar 17 19:35:33 2022 +0000

    🐛 MKS TinyBee - 2.5V ADC Vref (#23903)

commit 2558b323e85006c3c9f6a03bcaa82f61c95da0bb
Author: Jelmer van der Stel <steljwagh@users.noreply.github.com>
Date:   Sun Mar 13 23:20:30 2022 +0100

    🩹 Fix DWIN E3V2 display issues by allowing re-init (#23879)

commit 1db685593922214e49496d805dc9ea099e227f50
Author: Mrnt <github@maurent.com>
Date:   Sun Mar 13 15:17:35 2022 -0700

    🧑‍💻 Allow DIGIPOT Rsx / Vrefmax override (#23885)

commit 62f298aca39ff17bc7a51f49b9ff6b5b17a76c30
Author: Julien Staub <atsju2@yahoo.fr>
Date:   Sun Mar 13 23:09:32 2022 +0100

    🩹 Fix ExtUI build with Host Keepalive disabled (#23898)

commit 8d20c5aadfff34a024665ea349c0b66834e4d305
Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com>
Date:   Sun Mar 13 18:00:35 2022 -0400

    📝 Fix X2_MAX_POS comment (#23873)

commit 61b470249c1cfa361f25060940cc8b7f8a8f64e9
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Mar 13 16:59:43 2022 -0500

    📝 Fix DEFAULT_DUAL_X_CARRIAGE_MODE comment

commit 4ffa88f814f3ddcb7273b73c9bb68773bcf1fd51
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Mar 13 16:46:08 2022 -0500

    🚸 Test LIN_ADVANCE in a pins file

commit 8257040fafe758ac1913e9bf633fa0c9930dd9cb
Author: Mathew Winters <mathew@winters.org.nz>
Date:   Sun Mar 13 14:13:41 2022 +1300

    ⚡️ G12 - Only require used axes to be homed (#23422)

    Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

commit 5d9ab7e71eed56f242d4fae32836f305bb1ff680
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date:   Sat Mar 12 16:23:29 2022 -0800

    🔨 Drop extraneous build flag (#23862)

commit 1a76d4d467ebb3d8ed1df39767efa99beb08e854
Author: Nick <nick@n-wells.co.uk>
Date:   Sat Mar 12 23:47:47 2022 +0000

    🐛 Fix Chiron new TFT SD print after reset (#23855)

commit 4028c1cfc7bcaf78e49bb98b527353ec30a970de
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sat Mar 12 17:12:21 2022 -0600

    🩹 Fix FSTR / PSTR usage

commit c49f26a7ae6499f4e19dc1f75bb4438cb0d549cf
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sat Mar 12 16:34:58 2022 -0600

    🧑‍💻  Add standard BUZZ types

commit f82b13359520baf4da4e41aa85ed0fe3f8d31173
Author: Ludy <Ludy87@users.noreply.github.com>
Date:   Sun Mar 13 00:36:23 2022 +0100

    🌐 Fix, add some menu labels (#23895)

commit 2c3f2a14715665d7309e212bfd2a48240118e627
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sat Mar 12 15:59:01 2022 -0600

    🐛 Fix UBL 'G29 Q1' bug

commit 4817efcf81d353032b2873dc958ec63bcb298d19
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sat Mar 12 15:58:28 2022 -0600

    🧑‍💻 Add ExtUI::onLevelingDone, match DWIN to ExtUI

commit 16271377e2a00c2cd416ec21e5a21272e9f805ed
Author: BIGTREETECH <38851044+bigtreetech@users.noreply.github.com>
Date:   Sat Mar 12 08:23:18 2022 +0800

    🧑‍💻 STM32G0Bx : Use PLLQ for USB clock (#23870)

commit 61fb3828688c377178031142ba9cfaa3512cb915
Author: kisslorand <50251547+kisslorand@users.noreply.github.com>
Date:   Sat Mar 12 02:21:08 2022 +0200

    🚸 M401 H - Report BLTouch HS State (#23724)

commit 7dae720de5c4fdea5fab657c09a2c8ba66f5a054
Author: GatCode <gatcode@wdw.one>
Date:   Sat Mar 12 00:56:31 2022 +0100

    📌 Fix, extend Index Rev03 Mobo (#23851)

    Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

commit c6f4b38877d6ff5973c5273bf28c0fa1b60226a3
Author: Giuseppe499 <giuseppe499@live.it>
Date:   Sat Mar 12 00:12:03 2022 +0100

    🚸 Fix, extend X Axis Twist Compensation (#23745)

    Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

commit eabeac29fd311dc09799ce8a0db742048b07a2a9
Author: Miguel Risco-Castillo <mriscoc@users.noreply.github.com>
Date:   Fri Mar 11 15:06:49 2022 -0500

    🚸 Update Ender3 V2/S1 Pro UI (#23878)

commit b045c91f266d222f5851d76fb9723552c1f00313
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Sat Mar 12 03:51:25 2022 +1300

    fix g29 (#23887)

commit 56955c179d1fb6991f6267a344e712b1caeae154
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Fri Mar 11 02:56:24 2022 -0600

    🐛 Fix UI include

    Followup to ~2

commit 4eb1326355aaa022e1a9d41625851876b20b5aa3
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Fri Mar 11 21:52:35 2022 +1300

    📝 Update laser/spindle docs link (#23886)

commit b669aa49cccf4ceb41b99dfdbb88dac5945bed01
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Mar 10 22:07:47 2022 -0600

    🔧 DWIN_CREALITY_LCD_ENHANCED => DWIN_LCD_PROUI

    Followup to #23624

commit 152ec49b8b43e40a9cceaaa90f3ebf1c194dfe11
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Mar 10 17:35:03 2022 -0600

    🩹 Fix 'hdsl' warning

commit e4ca822dcf62c5a38b30472bd51ab40212ee2eb5
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Mar 10 17:25:09 2022 -0600

    🚸 Improve M422 error messages

commit 0fafcd20cddc0e76003454d7c292430f367f1106
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Fri Mar 4 16:07:38 2022 -0600

    🔧 Mark Thermal Variance Monitor EXPERIMENTAL

commit bd72df3bb6387af9421b1503ab74e29b8a1e705c
Author: Jack Wilsdon <jack.wilsdon@gmail.com>
Date:   Fri Mar 4 21:59:38 2022 +0000

    🐛 Emergency Parser with STM32 Mass Storage (#23827)

commit fd582dc863785b53048834d0c9789f1d264603b2
Author: tombrazier <68918209+tombrazier@users.noreply.github.com>
Date:   Fri Mar 4 21:57:51 2022 +0000

    🩹 Improve and apply XATC reset() (#23840)

commit 2986bc3b768e047fb333d35633900d512dbff439
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Wed Mar 2 17:58:23 2022 -0600

    ⚡️ Use seen_test in `M422`

commit e082a141f63e7af1d301a994c0ee796946bcb3a8
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Wed Mar 2 17:50:55 2022 -0600

    🚸 Use Z_STEPPER_ALIGN_STEPPER_XY to enable

commit 575c3150f96a7d43d93d092c9f0dd7f395ef6a78
Author: tombrazier <68918209+tombrazier@users.noreply.github.com>
Date:   Wed Mar 2 22:13:46 2022 +0000

    🚸 Universal X_AXIS_TWIST_COMPENSATION (#23828)

commit 43d4e306680d0a006f431b4ab29246450c6ee5e2
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Wed Mar 2 16:04:17 2022 -0600

  …

.github/contributing.md

@@ -116,7 +116,7 @@ Unsure where to begin contributing to Marlin? You can start by looking through t
 
 ### Pull Requests
 
-Pull Requests should always be targeted to working branches (e.g., `bugfix-2.0.x` and/or `bugfix-1.1.x`) and never to release branches (e.g., `2.0.x` and/or `1.1.x`). If this is your first Pull Request, please read our [Guide to Pull Requests](https://marlinfw.org/docs/development/getting_started_pull_requests.html) and Github's [Pull Request](https://help.github.com/articles/creating-a-pull-request/) documentation.
+Pull Requests should always be targeted to working branches (e.g., `bugfix-2.1.x` and/or `bugfix-1.1.x`) and never to release branches (e.g., `2.0.x` and/or `1.1.x`). If this is your first Pull Request, please read our [Guide to Pull Requests](https://marlinfw.org/docs/development/getting_started_pull_requests.html) and Github's [Pull Request](https://help.github.com/articles/creating-a-pull-request/) documentation.
 
 * Fill in [the required template](pull_request_template.md).
 * Don't include issue numbers in the PR title.