[Bug] Not flashing correct revision firmware to FC.

[DroneWuKong]

Describe the bug

When updating the firmware to v1.16.0 Alpha2, after connecting the flight controller and selecting the beta firmware option, everything installs and loads up fine, but when I look at the vehicle summary page it shows that v1.15 had been flashed.

Making a custom build of 1.16.0Alpha2, then flashing that firmware locally was my workaround.

To Reproduce

1. Open QGC
2. Click the Q icon on upper right > Vehicle Setup > Firmware (Step 1 in picture)
3. Connect your flight controller to the computer
4. When the Firmware setup window pops up, click "Advanced settings" checkbox
5. Select "Beat Testing (beta)" from the drop down (Step 2 in picture)
6. Click "Ok"

Expected behavior

When the beta firmware is selected, it updates to that revision of the firmware.

Screenshot / Media

Flight Log

No response

Software Version

ver all
HW arch: PX4_FMU_V6C
HW type: V6C000001
HW version: 0x000
HW revision: 0x001
PX4 git-hash: 8017135
PX4 version: Release 1.15.3 (17761279)
OS: NuttX
OS version: Release 11.0.0 (184549631)
OS git-hash: 5d74bc138955e6f010a38e0f87f34e9a9019aecc
Build datetime: Dec 4 2024 17:15:44
Build uri: localhost
Build variant: default
Toolchain: GNU GCC, 9.3.1 20200408 (release)
PX4GUID: 000600000000363835323133511900320019
MCU: STM32H7[4|5]xxx, rev. V
nsh>

Flight controller

Holybro Pixhawk 6C

Vehicle type

Multicopter

How are the different components wired up (including port information)

Holybro 915 Telemetry via Telem1

BetaFPV SuperD 2.4 via Telem2

Additional context

#24188