Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Minimum angle of "Controller roll limit" is high #13164

Closed
moreba1 opened this issue Oct 11, 2019 · 4 comments
Closed

Minimum angle of "Controller roll limit" is high #13164

moreba1 opened this issue Oct 11, 2019 · 4 comments

Comments

@moreba1
Copy link
Contributor

moreba1 commented Oct 11, 2019

Hi

I will set FW_R_LIM to 25 degree but i not allowed to set it under 35 degree in qgc. also some gliders must not bank more than 30 degree . please change the FW_R_LIM min .

@sfuhrer
Copy link
Contributor

sfuhrer commented Oct 11, 2019

30° is an extremely low (max!) bank angle. I don't know of any system that should not be allowed to bank so little.
If you want to have your flight with less tight turns than you should adapt turning radius and/or your route planning, and not this parameter.

Btw, you can still set any parameter in QGC to a value outside of the "normal" range, by clicking "enforce safe" or something similar in the advanced menu.

@moreba1
Copy link
Contributor Author

moreba1 commented Oct 11, 2019

@moreba1
Copy link
Contributor Author

moreba1 commented Oct 11, 2019

Btw, you can still set any parameter in QGC to a value outside of the "normal" range, by clicking "enforce safe" or something similar in the advanced menu.

i can not force save this parameter

@sfuhrer
Copy link
Contributor

sfuhrer commented Oct 11, 2019

Btw, you can still set any parameter in QGC to a value outside of the "normal" range, by clicking "enforce safe" or something similar in the advanced menu.

i can not force save this parameter

I quickly checked, works for me.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

2 participants