✨ TFT_COLOR_UI async DMA SPI (#24980)

Marlin/Configuration.h

@@ -3132,6 +3132,10 @@
 //#define TFT_COLOR_UI
 //#define TFT_LVGL_UI
 
+#if ENABLED(TFT_COLOR_UI)
+  //#define TFT_SHARED_SPI   // SPI is shared between TFT display and other devices. Disable async data transfer
+#endif
+
 #if ENABLED(TFT_LVGL_UI)
   //#define MKS_WIFI_MODULE  // MKS WiFi module
 #endif

Marlin/src/HAL/LPC1768/HAL_SPI.cpp

@@ -318,8 +318,16 @@ void SPIClass::dmaSend(void *buf, uint16_t length, bool minc) {
   // Enable DMA
   GPDMA_ChannelCmd(0, ENABLE);
 
+  /*
+   * Observed behaviour on normal data transfer completion (SKR 1.3 board / LPC1768 MCU)
+   *   GPDMA_STAT_INTTC flag is SET
+   *   GPDMA_STAT_INTERR flag is NOT SET
+   *   GPDMA_STAT_RAWINTTC flag is NOT SET
+   *   GPDMA_STAT_RAWINTERR flag is SET
+   */
+
   // Wait for data transfer
-  while (!GPDMA_IntGetStatus(GPDMA_STAT_RAWINTTC, 0) && !GPDMA_IntGetStatus(GPDMA_STAT_RAWINTERR, 0)) { }
+  while (!GPDMA_IntGetStatus(GPDMA_STAT_INTTC, 0) && !GPDMA_IntGetStatus(GPDMA_STAT_INTERR, 0)) {}
 
   // Clear err and int
   GPDMA_ClearIntPending (GPDMA_STATCLR_INTTC, 0);
@@ -333,6 +341,43 @@ void SPIClass::dmaSend(void *buf, uint16_t length, bool minc) {
   SSP_DMACmd(_currentSetting->spi_d, SSP_DMA_TX, DISABLE);
 }
 
+void SPIClass::dmaSendAsync(void *buf, uint16_t length, bool minc) {
+  //TODO: LPC dma can only write 0xFFF bytes at once.
+  GPDMA_Channel_CFG_Type GPDMACfg;
+
+  /* Configure GPDMA channel 0 -------------------------------------------------------------*/
+  /* DMA Channel 0 */
+  GPDMACfg.ChannelNum = 0;
+  // Source memory
+  GPDMACfg.SrcMemAddr = (uint32_t)buf;
+  // Destination memory - Not used
+  GPDMACfg.DstMemAddr = 0;
+  // Transfer size
+  GPDMACfg.TransferSize = length;
+  // Transfer width
+  GPDMACfg.TransferWidth = (_currentSetting->dataSize == DATA_SIZE_16BIT) ? GPDMA_WIDTH_HALFWORD : GPDMA_WIDTH_BYTE;
+  // Transfer type
+  GPDMACfg.TransferType = GPDMA_TRANSFERTYPE_M2P;
+  // Source connection - unused
+  GPDMACfg.SrcConn = 0;
+  // Destination connection
+  GPDMACfg.DstConn = (_currentSetting->spi_d == LPC_SSP0) ? GPDMA_CONN_SSP0_Tx : GPDMA_CONN_SSP1_Tx;
+
+  GPDMACfg.DMALLI = 0;
+
+  // Enable dma on SPI
+  SSP_DMACmd(_currentSetting->spi_d, SSP_DMA_TX, ENABLE);
+
+  // Only increase memory if minc is true
+  GPDMACfg.MemoryIncrease = (minc ? GPDMA_DMACCxControl_SI : 0);
+
+  // Setup channel with given parameter
+  GPDMA_Setup(&GPDMACfg);
+
+  // Enable DMA
+  GPDMA_ChannelCmd(0, ENABLE);
+}
+
 uint16_t SPIClass::read() {
   return SSP_ReceiveData(_currentSetting->spi_d);
 }

Marlin/src/HAL/LPC1768/include/SPI.h

@@ -155,6 +155,7 @@ class SPIClass {
   void read(uint8_t *buf, uint32_t len);
 
   void dmaSend(void *buf, uint16_t length, bool minc);
+  void dmaSendAsync(void *buf, uint16_t length, bool minc);
 
   /**
    * @brief Sets the number of the SPI peripheral to be used by

Marlin/src/HAL/LPC1768/tft/tft_spi.cpp

@@ -26,7 +26,7 @@
 
 #include "tft_spi.h"
 
-SPIClass TFT_SPI::SPIx(1);
+SPIClass TFT_SPI::SPIx(TFT_SPI_DEVICE);
 
 void TFT_SPI::Init() {
   #if PIN_EXISTS(TFT_RESET)
@@ -38,40 +38,10 @@ void TFT_SPI::Init() {
     OUT_WRITE(TFT_BACKLIGHT_PIN, HIGH);
   #endif
 
-  SET_OUTPUT(TFT_DC_PIN);
-  SET_OUTPUT(TFT_CS_PIN);
-  WRITE(TFT_DC_PIN, HIGH);
-  WRITE(TFT_CS_PIN, HIGH);
-
-  /**
-   * STM32F1 APB2 = 72MHz, APB1 = 36MHz, max SPI speed of this MCU if 18Mhz
-   * STM32F1 has 3 SPI ports, SPI1 in APB2, SPI2/SPI3 in APB1
-   * so the minimum prescale of SPI1 is DIV4, SPI2/SPI3 is DIV2
-   */
-  #if 0
-    #if SPI_DEVICE == 1
-     #define SPI_CLOCK_MAX SPI_CLOCK_DIV4
-    #else
-     #define SPI_CLOCK_MAX SPI_CLOCK_DIV2
-    #endif
-    uint8_t  clock;
-    uint8_t spiRate = SPI_FULL_SPEED;
-    switch (spiRate) {
-     case SPI_FULL_SPEED:    clock = SPI_CLOCK_MAX ;  break;
-     case SPI_HALF_SPEED:    clock = SPI_CLOCK_DIV4 ; break;
-     case SPI_QUARTER_SPEED: clock = SPI_CLOCK_DIV8 ; break;
-     case SPI_EIGHTH_SPEED:  clock = SPI_CLOCK_DIV16; break;
-     case SPI_SPEED_5:       clock = SPI_CLOCK_DIV32; break;
-     case SPI_SPEED_6:       clock = SPI_CLOCK_DIV64; break;
-     default:                clock = SPI_CLOCK_DIV2;  // Default from the SPI library
-    }
-  #endif
+  OUT_WRITE(TFT_DC_PIN, HIGH);
+  OUT_WRITE(TFT_CS_PIN, HIGH);
 
-  #if TFT_MISO_PIN == BOARD_SPI1_MISO_PIN
-    SPIx.setModule(1);
-  #elif TFT_MISO_PIN == BOARD_SPI2_MISO_PIN
-    SPIx.setModule(2);
-  #endif
+  SPIx.setModule(TFT_SPI_DEVICE);
   SPIx.setClock(SPI_CLOCK_MAX_TFT);
   SPIx.setBitOrder(MSBFIRST);
   SPIx.setDataMode(SPI_MODE0);
@@ -114,17 +84,62 @@ uint32_t TFT_SPI::ReadID(uint16_t Reg) {
   return data >> 7;
 }
 
-bool TFT_SPI::isBusy() { return false; }
+bool TFT_SPI::isBusy() {
+  #define __IS_DMA_CONFIGURED(__HANDLE__)   ((__HANDLE__)->DMACCSrcAddr != 0)
+
+  // DMA Channel 0 is hardcoded in dmaSendAsync() and dmaSend()
+  if (!__IS_DMA_CONFIGURED(LPC_GPDMACH0)) return false;
+
+  if (GPDMA_IntGetStatus(GPDMA_STAT_INTERR, 0)) {
+    // You should not be here - DMA transfer error flag is set
+    // Abort DMA transfer and release SPI
+  }
+  else {
+    // Check if DMA transfer completed flag is set
+    if (!GPDMA_IntGetStatus(GPDMA_STAT_INTTC, 0)) return true;
+    // Check if SPI TX butter is empty and SPI is idle
+    if ((SSP_GetStatus(LPC_SSPx, SSP_STAT_TXFIFO_EMPTY) == RESET) || (SSP_GetStatus(LPC_SSPx, SSP_STAT_BUSY) == SET)) return true;
+  }
+
+  Abort();
+  return false;
+}
+
+void TFT_SPI::Abort() {
+  // DMA Channel 0 is hardcoded in dmaSendAsync() and dmaSend()
+
+  // Disable DMA
+  GPDMA_ChannelCmd(0, DISABLE);
+
+  // Clear ERR and TC
+  GPDMA_ClearIntPending(GPDMA_STATCLR_INTTC, 0);
+  GPDMA_ClearIntPending(GPDMA_STATCLR_INTERR, 0);
+
+  // Disable DMA on SPI
+  SSP_DMACmd(LPC_SSPx, SSP_DMA_TX, DISABLE);
+
+  // Deconfigure DMA Channel 0
+  LPC_GPDMACH0->DMACCControl  = 0U;
+  LPC_GPDMACH0->DMACCConfig   = 0U;
+  LPC_GPDMACH0->DMACCSrcAddr  = 0U;
+  LPC_GPDMACH0->DMACCDestAddr = 0U;
 
-void TFT_SPI::Abort() { DataTransferEnd(); }
+  DataTransferEnd();
+}
 
 void TFT_SPI::Transmit(uint16_t Data) { SPIx.transfer(Data); }
 
-void TFT_SPI::TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count) {
+void TFT_SPI::Transmit(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count) {
   DataTransferBegin(DATASIZE_16BIT);
-  WRITE(TFT_DC_PIN, HIGH);
   SPIx.dmaSend(Data, Count, MemoryIncrease);
-  DataTransferEnd();
+  Abort();
+}
+
+void TFT_SPI::TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count) {
+  DataTransferBegin(DATASIZE_16BIT);
+  SPIx.dmaSendAsync(Data, Count, MemoryIncrease);
+
+  TERN_(TFT_SHARED_SPI, while (isBusy()));
 }
 
 #endif // HAS_SPI_TFT

Marlin/src/HAL/LPC1768/tft/tft_spi.h

@@ -27,24 +27,38 @@
 #include <lpc17xx_ssp.h>
 // #include <lpc17xx_gpdma.h>
 
+#define IS_SPI(N) (BOARD_NR_SPI >= N && (TFT_SCK_PIN == BOARD_SPI##N##_SCK_PIN) && (TFT_MOSI_PIN == BOARD_SPI##N##_MOSI_PIN) && (TFT_MISO_PIN == BOARD_SPI##N##_MISO_PIN))
+#if IS_SPI(1)
+  #define TFT_SPI_DEVICE  1
+  #define LPC_SSPx  LPC_SSP0
+#elif IS_SPI(2)
+  #define TFT_SPI_DEVICE  2
+  #define LPC_SSPx  LPC_SSP1
+#else
+  #error "Invalid TFT SPI configuration."
+#endif
+#undef IS_SPI
+
 #ifndef LCD_READ_ID
   #define LCD_READ_ID  0x04   // Read display identification information (0xD3 on ILI9341)
 #endif
 #ifndef LCD_READ_ID4
   #define LCD_READ_ID4 0xD3   // Read display identification information (0xD3 on ILI9341)
 #endif
 
-#define DATASIZE_8BIT    SSP_DATABIT_8
-#define DATASIZE_16BIT   SSP_DATABIT_16
-#define TFT_IO_DRIVER TFT_SPI
+#define DATASIZE_8BIT     SSP_DATABIT_8
+#define DATASIZE_16BIT    SSP_DATABIT_16
+#define TFT_IO_DRIVER     TFT_SPI
+#define DMA_MAX_SIZE      0xFFF
 
-#define DMA_MINC_ENABLE 1
-#define DMA_MINC_DISABLE 0
+#define DMA_MINC_ENABLE   1
+#define DMA_MINC_DISABLE  0
 
 class TFT_SPI {
 private:
   static uint32_t ReadID(uint16_t Reg);
   static void Transmit(uint16_t Data);
+  static void Transmit(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count);
   static void TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count);
 
 public:
@@ -56,22 +70,20 @@ class TFT_SPI {
   static void Abort();
 
   static void DataTransferBegin(uint16_t DataWidth = DATASIZE_16BIT);
-  static void DataTransferEnd() { OUT_WRITE(TFT_CS_PIN, HIGH); SPIx.end(); };
+  static void DataTransferEnd() { WRITE(TFT_CS_PIN, HIGH); SSP_Cmd(LPC_SSPx, DISABLE); };
   static void DataTransferAbort();
 
   static void WriteData(uint16_t Data) { Transmit(Data); }
-  static void WriteReg(uint16_t Reg) { OUT_WRITE(TFT_A0_PIN, LOW); Transmit(Reg); OUT_WRITE(TFT_A0_PIN, HIGH); }
+  static void WriteReg(uint16_t Reg) { WRITE(TFT_DC_PIN, LOW); Transmit(Reg); WRITE(TFT_DC_PIN, HIGH); }
+
+  static void WriteSequence_DMA(uint16_t *Data, uint16_t Count) { TransmitDMA(DMA_MINC_ENABLE, Data, Count); }
+  static void WriteMultiple_DMA(uint16_t Color, uint16_t Count) { static uint16_t Data; Data = Color; TransmitDMA(DMA_MINC_DISABLE, &Data, Count); }
 
-  static void WriteSequence(uint16_t *Data, uint16_t Count) { TransmitDMA(DMA_MINC_ENABLE, Data, Count); }
-  // static void WriteMultiple(uint16_t Color, uint16_t Count) { static uint16_t Data; Data = Color; TransmitDMA(DMA_MINC_DISABLE, &Data, Count); }
+  static void WriteSequence(uint16_t *Data, uint16_t Count) { Transmit(DMA_MINC_ENABLE, Data, Count); }
   static void WriteMultiple(uint16_t Color, uint32_t Count) {
-    static uint16_t Data; Data = Color;
-    //LPC dma can only write 0xFFF bytes at once.
-    #define MAX_DMA_SIZE (0xFFF - 1)
     while (Count > 0) {
-      TransmitDMA(DMA_MINC_DISABLE, &Data, Count > MAX_DMA_SIZE ? MAX_DMA_SIZE : Count);
-      Count = Count > MAX_DMA_SIZE ? Count - MAX_DMA_SIZE : 0;
+      Transmit(DMA_MINC_DISABLE, &Color, Count > DMA_MAX_SIZE ? DMA_MAX_SIZE : Count);
+      Count = Count > DMA_MAX_SIZE ? Count - DMA_MAX_SIZE : 0;
     }
-    #undef MAX_DMA_SIZE
   }
 };

Marlin/src/HAL/LPC1768/tft/xpt2046.cpp

@@ -44,9 +44,11 @@ uint16_t delta(uint16_t a, uint16_t b) { return a > b ? a - b : b - a; }
 #endif
 
 void XPT2046::Init() {
-  SET_INPUT(TOUCH_MISO_PIN);
-  SET_OUTPUT(TOUCH_MOSI_PIN);
-  SET_OUTPUT(TOUCH_SCK_PIN);
+  #if DISABLED(TOUCH_BUTTONS_HW_SPI)
+    SET_INPUT(TOUCH_MISO_PIN);
+    SET_OUTPUT(TOUCH_MOSI_PIN);
+    SET_OUTPUT(TOUCH_SCK_PIN);
+  #endif
   OUT_WRITE(TOUCH_CS_PIN, HIGH);
 
   #if PIN_EXISTS(TOUCH_INT)

Marlin/src/HAL/STM32/tft/tft_fsmc.cpp

@@ -148,20 +148,35 @@ uint32_t TFT_FSMC::ReadID(tft_data_t Reg) {
 
 bool TFT_FSMC::isBusy() {
   #ifdef STM32F1xx
-    volatile bool dmaEnabled = (DMAtx.Instance->CCR & DMA_CCR_EN) != RESET;
+    #define __IS_DMA_ENABLED(__HANDLE__)      ((__HANDLE__)->Instance->CCR & DMA_CCR_EN)
+    #define __IS_DMA_CONFIGURED(__HANDLE__)   ((__HANDLE__)->Instance->CPAR != 0)
   #elif defined(STM32F4xx)
-    volatile bool dmaEnabled = DMAtx.Instance->CR & DMA_SxCR_EN;
+    #define __IS_DMA_ENABLED(__HANDLE__)      ((__HANDLE__)->Instance->CR & DMA_SxCR_EN)
+    #define __IS_DMA_CONFIGURED(__HANDLE__)   ((__HANDLE__)->Instance->PAR != 0)
   #endif
-  if (dmaEnabled) {
-    if (__HAL_DMA_GET_FLAG(&DMAtx, __HAL_DMA_GET_TC_FLAG_INDEX(&DMAtx)) != 0 || __HAL_DMA_GET_FLAG(&DMAtx, __HAL_DMA_GET_TE_FLAG_INDEX(&DMAtx)) != 0)
-      Abort();
-  }
-  else
-    Abort();
-  return dmaEnabled;
+
+  if (!__IS_DMA_CONFIGURED(&DMAtx)) return false;
+
+  // Check if DMA transfer error or transfer complete flags are set
+  if ((__HAL_DMA_GET_FLAG(&DMAtx, __HAL_DMA_GET_TE_FLAG_INDEX(&DMAtx)) == 0) && (__HAL_DMA_GET_FLAG(&DMAtx, __HAL_DMA_GET_TC_FLAG_INDEX(&DMAtx)) == 0)) return true;
+
+  __DSB();
+  Abort();
+  return false;
+}
+
+void TFT_FSMC::Abort() {
+  HAL_DMA_Abort(&DMAtx);  // Abort DMA transfer if any
+  HAL_DMA_DeInit(&DMAtx); // Deconfigure DMA
 }
 
 void TFT_FSMC::TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count) {
+  DMAtx.Init.PeriphInc = MemoryIncrease;
+  HAL_DMA_Init(&DMAtx);
+  HAL_DMA_Start(&DMAtx, (uint32_t)Data, (uint32_t)&(LCD->RAM), Count);
+}
+
+void TFT_FSMC::Transmit(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count) {
   DMAtx.Init.PeriphInc = MemoryIncrease;
   HAL_DMA_Init(&DMAtx);
   DataTransferBegin();

Marlin/src/HAL/STM32/tft/tft_fsmc.h

@@ -41,6 +41,7 @@
 #define DATASIZE_8BIT  SPI_DATASIZE_8BIT
 #define DATASIZE_16BIT SPI_DATASIZE_16BIT
 #define TFT_IO_DRIVER  TFT_FSMC
+#define DMA_MAX_SIZE   0xFFFF
 
 #define TFT_DATASIZE TERN(TFT_INTERFACE_FSMC_8BIT, DATASIZE_8BIT, DATASIZE_16BIT)
 typedef TERN(TFT_INTERFACE_FSMC_8BIT, uint8_t, uint16_t) tft_data_t;
@@ -59,27 +60,29 @@ class TFT_FSMC {
 
     static uint32_t ReadID(tft_data_t Reg);
     static void Transmit(tft_data_t Data) { LCD->RAM = Data; __DSB(); }
+    static void Transmit(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count);
     static void TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count);
 
   public:
     static void Init();
     static uint32_t GetID();
     static bool isBusy();
-    static void Abort() { __HAL_DMA_DISABLE(&DMAtx); }
+    static void Abort();
 
     static void DataTransferBegin(uint16_t DataWidth = TFT_DATASIZE) {}
     static void DataTransferEnd() {};
 
     static void WriteData(uint16_t Data) { Transmit(tft_data_t(Data)); }
     static void WriteReg(uint16_t Reg) { LCD->REG = tft_data_t(Reg); __DSB(); }
 
-    static void WriteSequence(uint16_t *Data, uint16_t Count) { TransmitDMA(DMA_PINC_ENABLE, Data, Count); }
-    static void WriteMultiple(uint16_t Color, uint16_t Count) { static uint16_t Data; Data = Color; TransmitDMA(DMA_PINC_DISABLE, &Data, Count); }
+    static void WriteSequence_DMA(uint16_t *Data, uint16_t Count) { TransmitDMA(DMA_PINC_ENABLE, Data, Count); }
+    static void WriteMultiple_DMA(uint16_t Color, uint16_t Count) { static uint16_t Data; Data = Color; TransmitDMA(DMA_PINC_DISABLE, &Data, Count); }
+
+    static void WriteSequence(uint16_t *Data, uint16_t Count) { Transmit(DMA_PINC_ENABLE, Data, Count); }
     static void WriteMultiple(uint16_t Color, uint32_t Count) {
-      static uint16_t Data; Data = Color;
       while (Count > 0) {
-        TransmitDMA(DMA_MINC_DISABLE, &Data, Count > 0xFFFF ? 0xFFFF : Count);
-        Count = Count > 0xFFFF ? Count - 0xFFFF : 0;
+        Transmit(DMA_MINC_DISABLE, &Color, Count > DMA_MAX_SIZE ? DMA_MAX_SIZE : Count);
+        Count = Count > DMA_MAX_SIZE ? Count - DMA_MAX_SIZE : 0;
       }
     }
 };

Marlin/src/HAL/STM32/tft/tft_ltdc.cpp

@@ -356,7 +356,7 @@ void TFT_LTDC::WriteReg(uint16_t Reg) {
   reg = Reg;
 }
 
-void TFT_LTDC::TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count) {
+void TFT_LTDC::Transmit(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count) {
 
   while (x_cur != x_min && Count) {
     Transmit(*Data);