Skip to content

Commit

Permalink
✨ CHAMBER_FAN_INDEX
Browse files Browse the repository at this point in the history 
MarlinFirmware/Marlin#23262
  • Loading branch information
@thinkyhead
thinkyhead committed Dec 5, 2021
1 parent 0a50548 commit 4130382
Show file tree
Hide file tree
Showing 267 changed files with 534 additions and 267 deletions.
3 changes: 2 additions & 1 deletion config/default/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -186,7 +186,8 @@

//#define CHAMBER_FAN // Enable a fan on the chamber
#if ENABLED(CHAMBER_FAN)
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#if CHAMBER_FAN_MODE == 0
#define CHAMBER_FAN_BASE 255 // Chamber fan PWM (0-255)
#elif CHAMBER_FAN_MODE == 1
Expand Down
3 changes: 2 additions & 1 deletion config/examples/3DFabXYZ/Migbot/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -186,7 +186,8 @@

//#define CHAMBER_FAN // Enable a fan on the chamber
#if ENABLED(CHAMBER_FAN)
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#if CHAMBER_FAN_MODE == 0
#define CHAMBER_FAN_BASE 255 // Chamber fan PWM (0-255)
#elif CHAMBER_FAN_MODE == 1
Expand Down
3 changes: 2 additions & 1 deletion config/examples/ADIMLab/Gantry v1/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -186,7 +186,8 @@

//#define CHAMBER_FAN // Enable a fan on the chamber
#if ENABLED(CHAMBER_FAN)
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#if CHAMBER_FAN_MODE == 0
#define CHAMBER_FAN_BASE 255 // Chamber fan PWM (0-255)
#elif CHAMBER_FAN_MODE == 1
Expand Down
3 changes: 2 additions & 1 deletion config/examples/ADIMLab/Gantry v2/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -186,7 +186,8 @@

//#define CHAMBER_FAN // Enable a fan on the chamber
#if ENABLED(CHAMBER_FAN)
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#if CHAMBER_FAN_MODE == 0
#define CHAMBER_FAN_BASE 255 // Chamber fan PWM (0-255)
#elif CHAMBER_FAN_MODE == 1
Expand Down
3 changes: 2 additions & 1 deletion config/examples/Alfawise/U20-bltouch/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -186,7 +186,8 @@

//#define CHAMBER_FAN // Enable a fan on the chamber
#if ENABLED(CHAMBER_FAN)
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#if CHAMBER_FAN_MODE == 0
#define CHAMBER_FAN_BASE 255 // Chamber fan PWM (0-255)
#elif CHAMBER_FAN_MODE == 1
Expand Down
3 changes: 2 additions & 1 deletion config/examples/Alfawise/U20/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -186,7 +186,8 @@

//#define CHAMBER_FAN // Enable a fan on the chamber
#if ENABLED(CHAMBER_FAN)
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#if CHAMBER_FAN_MODE == 0
#define CHAMBER_FAN_BASE 255 // Chamber fan PWM (0-255)
#elif CHAMBER_FAN_MODE == 1
Expand Down
3 changes: 2 additions & 1 deletion config/examples/AliExpress/UM2pExt/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -186,7 +186,8 @@

//#define CHAMBER_FAN // Enable a fan on the chamber
#if ENABLED(CHAMBER_FAN)
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#if CHAMBER_FAN_MODE == 0
#define CHAMBER_FAN_BASE 255 // Chamber fan PWM (0-255)
#elif CHAMBER_FAN_MODE == 1
Expand Down
3 changes: 2 additions & 1 deletion config/examples/Anet/A2/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -186,7 +186,8 @@

//#define CHAMBER_FAN // Enable a fan on the chamber
#if ENABLED(CHAMBER_FAN)
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#if CHAMBER_FAN_MODE == 0
#define CHAMBER_FAN_BASE 255 // Chamber fan PWM (0-255)
#elif CHAMBER_FAN_MODE == 1
Expand Down
3 changes: 2 additions & 1 deletion config/examples/Anet/A2plus/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -186,7 +186,8 @@

//#define CHAMBER_FAN // Enable a fan on the chamber
#if ENABLED(CHAMBER_FAN)
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#if CHAMBER_FAN_MODE == 0
#define CHAMBER_FAN_BASE 255 // Chamber fan PWM (0-255)
#elif CHAMBER_FAN_MODE == 1
Expand Down
3 changes: 2 additions & 1 deletion config/examples/Anet/A6/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -186,7 +186,8 @@

//#define CHAMBER_FAN // Enable a fan on the chamber
#if ENABLED(CHAMBER_FAN)
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#if CHAMBER_FAN_MODE == 0
#define CHAMBER_FAN_BASE 255 // Chamber fan PWM (0-255)
#elif CHAMBER_FAN_MODE == 1
Expand Down
3 changes: 2 additions & 1 deletion config/examples/Anet/A8/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -186,7 +186,8 @@

//#define CHAMBER_FAN // Enable a fan on the chamber
#if ENABLED(CHAMBER_FAN)
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#if CHAMBER_FAN_MODE == 0
#define CHAMBER_FAN_BASE 255 // Chamber fan PWM (0-255)
#elif CHAMBER_FAN_MODE == 1
Expand Down
3 changes: 2 additions & 1 deletion config/examples/Anet/A8plus/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -186,7 +186,8 @@

//#define CHAMBER_FAN // Enable a fan on the chamber
#if ENABLED(CHAMBER_FAN)
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#if CHAMBER_FAN_MODE == 0
#define CHAMBER_FAN_BASE 255 // Chamber fan PWM (0-255)
#elif CHAMBER_FAN_MODE == 1
Expand Down
3 changes: 2 additions & 1 deletion config/examples/Anet/A9/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -186,7 +186,8 @@

//#define CHAMBER_FAN // Enable a fan on the chamber
#if ENABLED(CHAMBER_FAN)
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#if CHAMBER_FAN_MODE == 0
#define CHAMBER_FAN_BASE 255 // Chamber fan PWM (0-255)
#elif CHAMBER_FAN_MODE == 1
Expand Down
3 changes: 2 additions & 1 deletion config/examples/Anet/E10/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -186,7 +186,8 @@

//#define CHAMBER_FAN // Enable a fan on the chamber
#if ENABLED(CHAMBER_FAN)
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#if CHAMBER_FAN_MODE == 0
#define CHAMBER_FAN_BASE 255 // Chamber fan PWM (0-255)
#elif CHAMBER_FAN_MODE == 1
Expand Down
3 changes: 2 additions & 1 deletion config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -186,7 +186,8 @@

//#define CHAMBER_FAN // Enable a fan on the chamber
#if ENABLED(CHAMBER_FAN)
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#if CHAMBER_FAN_MODE == 0
#define CHAMBER_FAN_BASE 255 // Chamber fan PWM (0-255)
#elif CHAMBER_FAN_MODE == 1
Expand Down
3 changes: 2 additions & 1 deletion config/examples/Anet/E16/Stock/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -186,7 +186,8 @@

//#define CHAMBER_FAN // Enable a fan on the chamber
#if ENABLED(CHAMBER_FAN)
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#if CHAMBER_FAN_MODE == 0
#define CHAMBER_FAN_BASE 255 // Chamber fan PWM (0-255)
#elif CHAMBER_FAN_MODE == 1
Expand Down
3 changes: 2 additions & 1 deletion config/examples/Anet/ET4+/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -186,7 +186,8 @@

//#define CHAMBER_FAN // Enable a fan on the chamber
#if ENABLED(CHAMBER_FAN)
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#if CHAMBER_FAN_MODE == 0
#define CHAMBER_FAN_BASE 255 // Chamber fan PWM (0-255)
#elif CHAMBER_FAN_MODE == 1
Expand Down
3 changes: 2 additions & 1 deletion config/examples/Anet/ET4-Pro/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -186,7 +186,8 @@

//#define CHAMBER_FAN // Enable a fan on the chamber
#if ENABLED(CHAMBER_FAN)
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#if CHAMBER_FAN_MODE == 0
#define CHAMBER_FAN_BASE 255 // Chamber fan PWM (0-255)
#elif CHAMBER_FAN_MODE == 1
Expand Down
3 changes: 2 additions & 1 deletion config/examples/Anet/ET4/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -186,7 +186,8 @@

//#define CHAMBER_FAN // Enable a fan on the chamber
#if ENABLED(CHAMBER_FAN)
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#if CHAMBER_FAN_MODE == 0
#define CHAMBER_FAN_BASE 255 // Chamber fan PWM (0-255)
#elif CHAMBER_FAN_MODE == 1
Expand Down
3 changes: 2 additions & 1 deletion config/examples/Anet/ET4X/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -186,7 +186,8 @@

//#define CHAMBER_FAN // Enable a fan on the chamber
#if ENABLED(CHAMBER_FAN)
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#if CHAMBER_FAN_MODE == 0
#define CHAMBER_FAN_BASE 255 // Chamber fan PWM (0-255)
#elif CHAMBER_FAN_MODE == 1
Expand Down
3 changes: 2 additions & 1 deletion config/examples/Anet/ET5-Pro/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -186,7 +186,8 @@

//#define CHAMBER_FAN // Enable a fan on the chamber
#if ENABLED(CHAMBER_FAN)
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#if CHAMBER_FAN_MODE == 0
#define CHAMBER_FAN_BASE 255 // Chamber fan PWM (0-255)
#elif CHAMBER_FAN_MODE == 1
Expand Down
3 changes: 2 additions & 1 deletion config/examples/Anet/ET5/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -186,7 +186,8 @@

//#define CHAMBER_FAN // Enable a fan on the chamber
#if ENABLED(CHAMBER_FAN)
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#if CHAMBER_FAN_MODE == 0
#define CHAMBER_FAN_BASE 255 // Chamber fan PWM (0-255)
#elif CHAMBER_FAN_MODE == 1
Expand Down
3 changes: 2 additions & 1 deletion config/examples/Anet/ET5X/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -186,7 +186,8 @@

//#define CHAMBER_FAN // Enable a fan on the chamber
#if ENABLED(CHAMBER_FAN)
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#if CHAMBER_FAN_MODE == 0
#define CHAMBER_FAN_BASE 255 // Chamber fan PWM (0-255)
#elif CHAMBER_FAN_MODE == 1
Expand Down
3 changes: 2 additions & 1 deletion config/examples/AnyCubic/Chiron/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -186,7 +186,8 @@

//#define CHAMBER_FAN // Enable a fan on the chamber
#if ENABLED(CHAMBER_FAN)
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#if CHAMBER_FAN_MODE == 0
#define CHAMBER_FAN_BASE 255 // Chamber fan PWM (0-255)
#elif CHAMBER_FAN_MODE == 1
Expand Down
3 changes: 2 additions & 1 deletion config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -186,7 +186,8 @@

//#define CHAMBER_FAN // Enable a fan on the chamber
#if ENABLED(CHAMBER_FAN)
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#if CHAMBER_FAN_MODE == 0
#define CHAMBER_FAN_BASE 255 // Chamber fan PWM (0-255)
#elif CHAMBER_FAN_MODE == 1
Expand Down
3 changes: 2 additions & 1 deletion config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -186,7 +186,8 @@

//#define CHAMBER_FAN // Enable a fan on the chamber
#if ENABLED(CHAMBER_FAN)
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#if CHAMBER_FAN_MODE == 0
#define CHAMBER_FAN_BASE 255 // Chamber fan PWM (0-255)
#elif CHAMBER_FAN_MODE == 1
Expand Down
3 changes: 2 additions & 1 deletion config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -186,7 +186,8 @@

//#define CHAMBER_FAN // Enable a fan on the chamber
#if ENABLED(CHAMBER_FAN)
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#if CHAMBER_FAN_MODE == 0
#define CHAMBER_FAN_BASE 255 // Chamber fan PWM (0-255)
#elif CHAMBER_FAN_MODE == 1
Expand Down
3 changes: 2 additions & 1 deletion config/examples/AnyCubic/i3 Mega/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -186,7 +186,8 @@

//#define CHAMBER_FAN // Enable a fan on the chamber
#if ENABLED(CHAMBER_FAN)
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#if CHAMBER_FAN_MODE == 0
#define CHAMBER_FAN_BASE 255 // Chamber fan PWM (0-255)
#elif CHAMBER_FAN_MODE == 1
Expand Down
3 changes: 2 additions & 1 deletion config/examples/AnyCubic/i3/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -186,7 +186,8 @@

//#define CHAMBER_FAN // Enable a fan on the chamber
#if ENABLED(CHAMBER_FAN)
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan
#define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
#if CHAMBER_FAN_MODE == 0
#define CHAMBER_FAN_BASE 255 // Chamber fan PWM (0-255)
#elif CHAMBER_FAN_MODE == 1
Expand Down
Loading

0 comments on commit 4130382

Please sign in to comment.