Skip to content
/ RRIFT Public

Code for Reference Region and Input Function Tail method for DCE-MRI (MRM 27913)

License

Notifications You must be signed in to change notification settings

MPUmri/RRIFT

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

10 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Reference region and input function tail (RRIFT) method

Introduction

This repository contains code for the manuscript:

Ahmed, Z., & Levesque, I. R. (2019). Pharmacokinetic modeling of dynamic contrast‐enhanced MRI using a reference region and input function tail. Magnetic Resonance in Medicine

A preprint is available in this gitlab repository.

The manuscript uses the constrained extended reference region model (CERRM) which is implemented in ./mfiles/CERRM.m while the reference region and input function tail (RRIFT) equation is implemented in ./mfiles/RRIFT.m. The linearized extended Tofts model (ETM), which is used for comparison, is in ./mfiles/Tofts_LLSQ.m.

A short example on simulated data is in a00_quickExample.m.

Simulations

The simulation scripts have filenames starting from b00 to b05. Since some of the simulation steps are time consuming (~30 minutes), the resulting .mat files have been uploaded into an OSF repository. If the four .mat files (begining with the filename sim) are downloaded from the OSF repository and placed in the data folder, then all of the even-numbered scripts can be skipped---i.e. you can run b01, b03, and b05 to produce the figures in the manuscript.

Overview of simulation scripts

  • b00_makeSimMap.m makes the 2D virtual phantom which contains 100 parameter combinations. This is used as a starting point for all the simulation.
    • The output file simMap.mat is in the OSF repository and should be placed in the data directory
  • b01_sketchOverview.m will produce Fig. 1 in the manuscript
    • This script also performs a quick comparison with the reference tissue plus vessel (RTPV) technique and displays the results in the console/terminal
  • b02_mainSimAnalysis.m will fit RRIFT and the ETM to the simulated data under a range of noise levels and temporal resolutions
    • The output file simResults.mat is in the OSF repository and should be placed in the data directory
  • b03_mainSimFigures.m will produce Figs. 2 & 3 in the manuscript
  • b04_secondarySimAnalysis.m is similar to b02 except the reference tissue parameters are also allowed to vary. For speed, only a temporal resolution of 15 s and noise of 0.02 mM is used, but this can be changed in the code
    • The output files are: simResultsTRes15-varKtRR.mat and simResultsTRes15-varVeRR.mat. They should be placed in the data directory.
  • b05_secondarySimFigures.m will produce Fig. 4 in the manuscript

In-vivo evaluation

Obtaining the data

The data can be downloaded from the cancer imaging archive under the TCGA-GBM collection, but since only a small subset of collection contains DCE-MRI data, the subset has been uploaded online on the OSF.

The OSF repository can be used in one of two ways:

  1. Download the DICOM data in the TCGA-GBM folder from the OSF repository, and then use the script x01_dicomReader.m to perform the T1 mapping and convert signal to concentration.
  2. Alternatively, the results from the previous step can be downloaded by selecting the TCGA-GBM-MAT folder from the same OSF repository and clicking on the Download as zip button. Unzip the contents of the downloaded .zip into the ./data/TCGA-GBM-Mat folder---make the folder if it doesn't exist.

After either of the above two options, the final directory tree should resemble:

RRIFT/
├── data/
│   ├── Results/
│   ├── TCGA-GBM-Masks/
│   └── TCGA-GBM-Mat/
│       ├── Ct/
│       ├── DCE/
│       ├── hdr/
│       └── T1/
├── mfiles/
:

where the subfolders contain:

  • Ct/ - the concentration-time data
  • DCE/ - the signal-time data (i.e. acquired DCE-MRI data)
  • hdr/ - the DICOM headers for the DCE-MRI data
  • T1/ - the T1 map computed from the variable flip angle data

Overview of in-vivo evaluation code

For convenience, the output of most of the scripts is included within the github repository. This means that the c01 script can be skipped, and all the other scripts should work without any additional steps.

  • c01_preprocessDCE.m grabs the relevant information---e.g. AIF, tumour curves, muscle curve---and saves them as a .mat file for future steps
    • The output is stored in ./data/TCGA-GBM-Results/c01_preprocessed/
  • c02_doRRIFT.m fits RRIFT and the ETM to the in-vivo data and saves the results
    • The output is stored in ./data/TCGA-GBM-Results/c02_postprocessed/
  • c03_showResults makes Figs. 5, 8, S1, & S2 while additional features, such as noise, are reported in the console
  • c04_showResults_SinglePatient was used for Figs. 6 & 7
  • c05_doRRIFT_smallerTails looks at the effect of reducing the tail duration, and produces a figure which was ultimately not included in the manuscript
  • c06_doRRIFT_downsampled downsampled the in-vivo data and fits RRIFT and the ETM
    • The output is stored in ./data/TCGA-GBM-Results/c06_downsampled/
  • c07_showResults_downsampled makes Fig. 10
  • c08_showMaps_downsampled.m makes Fig. 9

About

Code for Reference Region and Input Function Tail method for DCE-MRI (MRM 27913)

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published