Understanding self.control_* usage

[marcelrv]

Hi,
I've created support for the Seplos v3 BMS. https://github.com/marcelrv/dbus-serialbattery/tree/seplosv3

What I not yet quite understand what is the proper usage / updating of the self.control_* fields:

    # self.control_voltage: float = None
    # self.control_discharge_current: int = None
    # self.control_charge_current: int = None
    # self.control_allow_charge: bool = None
    # self.control_allow_discharge: bool = None

I have populated the voltage & currents with the same data I see in the can-bus (build-in by victron) implementation (in the picture)
self.control_voltage = spa[0x65] / 100
self.control_charge_current = spa[0x66]
self.control_discharge_current = spa[0x67]

But what do do with the self.control_allow_charge & self.control_allow_discharge.
I do have the status of the charge & discharge fets of the BMS. Would this be what I use to put in the allow charge & discharge?

[mr-manuel]

You don't need to populate these values. Check the battery_template.py to see which values are needed.

The values you mentioned are calculated by the driver itself.