Skip to content

LineageOS/android_system_update_engine

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Chrome OS Update Process

[TOC]

System updates in more modern operating systems like Chrome OS and Android are called A/B updates, over-the-air (OTA) updates, seamless updates, or simply auto updates. In contrast to more primitive system updates (like Windows or macOS) where the system is booted into a special mode to override the system partitions with newer updates and may take several minutes or hours, A/B updates have several advantages including but not limited to:

  • Updates maintain a workable system that remains on the disk during and after an update. Hence, reducing the likelihood of corrupting a device into a non-usable state. And reducing the need for flashing devices manually or at repair and warranty centers, etc.
  • Updates can happen while the system is running (normally with minimum overhead) without interrupting the user. The only downside for users is a required reboot (or, in Chrome OS, a sign out which automatically causes a reboot if an update was performed where the reboot duration is about 10 seconds and is no different than a normal reboot).
  • The user does not need (although they can) to request for an update. The update checks happen periodically in the background.
  • If the update fails to apply, the user is not affected. The user will continue on the old version of the system and the system will attempt to apply the update again at a later time.
  • If the update applies correctly but fails to boot, the system will rollback to the old partition and the user can still use the system as usual.
  • The user does not need to reserve enough space for the update. The system has already reserved enough space in terms of two copies (A and B) of a partition. The system doesn’t even need any cache space on the disk, everything happens seamlessly from network to memory to the inactive partitions.

Life of an A/B Update

In A/B update capable systems, each partition, such as the kernel or root (or other artifacts like DLC), has two copies. We call these two copies active (A) and inactive (B). The system is booted into the active partition (depending on which copy has the higher priority at boot time) and when a new update is available, it is written into the inactive partition. After a successful reboot, the previously inactive partition becomes active and the old active partition becomes inactive.

Generation

But everything starts with generating OTA packages on (Google) servers for each new system image. This is done by calling ota_from_target_files with source and destination builds. This script requires target_file.zip to work, image files are not sufficient.

Distribution/Configuration

Once the OTA packages are generated, they are signed with specific keys and stored in a location known to an update server (GOTA). GOTA will then make this OTA package accessible via a public URL. Optionally, operators an choose to make this OTA update available only to a specific subset of devices.

Installation

When the device's updater client initiates an update (either periodically or user initiated), it first consults different device policies to see if the update check is allowed. For example, device policies can prevent an update check during certain times of a day or they require the update check time to be scattered throughout the day randomly, etc.

Once policies allow for the update check, the updater client sends a request to the update server (all this communication happens over HTTPS) and identifies its parameters like its Application ID, hardware ID, version, board, etc.

Some policities on the server might prevent the device from getting specific OTA updates, these server side policities are often set by operators. For example, the operator might want to deliver a beta version of software to only a subset of devices.

But if the update server decides to serve an update payload, it will respond with all the parameters needed to perform an update like the URLs to download the payloads, the metadata signatures, the payload size and hash, etc. The updater client continues communicating with the update server after different state changes, like reporting that it started to download the payload or it finished the update, or reports that the update failed with specific error codes, etc.

The device will then proceed to actually installing the OTA update. This consists of roughly 3 steps.

Download & Install

Each payload consists of two main sections: metadata and extra data. The metadata is basically a list of operations that should be performed for an update. The extra data contains the data blobs needed by some or all of these operations. The updater client first downloads the metadata and cryptographically verifies it using the provided signatures from the update server’s response. Once the metadata is verified as valid, the rest of the payload can easily be verified cryptographically (mostly through SHA256 hashes).

Next, the updater client marks the inactive partition as unbootable (because it needs to write the new updates into it). At this point the system cannot rollback to the inactive partition anymore.

Then, the updater client performs the operations defined in the metadata (in the order they appear in the metadata) and the rest of the payload is gradually downloaded when these operations require their data. Once an operation is finished its data is discarded. This eliminates the need for caching the entire payload before applying it. During this process the updater client periodically checkpoints the last operation performed so in the event of failure or system shutdown, etc. it can continue from the point it missed without redoing all operations from the beginning.

During the download, the updater client hashes the downloaded bytes and when the download finishes, it checks the payload signature (located at the end of the payload). If the signature cannot be verified, the update is rejected.

Hash Verification & Verity Computation

After the inactive partition is updated, the updater client will compute Forward-Error-Correction(also known as FEC, Verity) code for each partition, and wriee the computed verity data to inactive partitions. In some updates, verity data is included in the extra data, so this step will be skipped.

Then, the entire partition is re-read, hashed and compared to a hash value passed in the metadata to make sure the update was successfully written into the partition. Hash computed in this step includes the verity code written in last step.

Postintall

In the next step, the Postinstall scripts (if any) is called. From OTA's perspective, these postinstall scripts are just blackboxes. Usually postinstall scripts will optimize existings apps on the phone and run file system garbage collection, so that device can boot fast after OTA. But these are managed by other teams.

Finishing Touches

Then the updater client goes into a state that identifies the update has completed and the user needs to reboot the system. At this point, until the user reboots (or signs out), the updater client will not do any more system updates even if newer updates are available. However, it does continue to perform periodic update checks so we can have statistics on the number of active devices in the field.

After the update proved successful, the inactive partition is marked to have a higher priority (on a boot, a partition with higher priority is booted first). Once the user reboots the system, it will boot into the updated partition and it is marked as active. At this point, after the reboot, the update_verifier program runs, read all dm-verity devices to make sure the partitions aren't corrupted, then mark the update as successful.

A/B updates are considered completed at this point. Virtual A/B updates will have an additional step after this, called "merging". Merging usually takes few minutes, after that Virtual A/B updates are considered complete.

Update Engine Daemon

The update_engine is a single-threaded daemon process that runs all the times. This process is the heart of the auto updates. It runs with lower priorities in the background and is one of the last processes to start after a system boot. Different clients (like GMS Core or other services) can send requests for update checks to the update engine. The details of how requests are passed to the update engine is system dependent, but in Chrome OS it is D-Bus. Look at the D-Bus interface for a list of all available methods. On Android it is binder.

There are many resiliency features embedded in the update engine that makes auto updates robust including but not limited to:

  • If the update engine crashes, it will restart automatically.
  • During an active update it periodically checkpoints the state of the update and if it fails to continue the update or crashes in the middle, it will continue from the last checkpoint.
  • It retries failed network communication.
  • If it fails to apply a delta payload (due to bit changes on the active partition) for a few times, it switches to full payload.

The updater clients writes its active preferences in /data/misc/update_engine/prefs. These preferences help with tracking changes during the lifetime of the updater client and allows properly continuing the update process after failed attempts or crashes.

Interactive vs Non-Interactive vs. Forced Updates

Non-interactive updates are updates that are scheduled periodically by the update engine and happen in the background. Interactive updates, on the other hand, happen when a user specifically requests an update check (e.g. by clicking on “Check For Update” button in Chrome OS’s About page). Depending on the update server's policies, interactive updates have higher priority than non-interactive updates (by carrying marker hints). They may decide to not provide an update if they have busy server load, etc. There are other internal differences between these two types of updates too. For example, interactive updates try to install the update faster.

Forced updates are similar to interactive updates (initiated by some kind of user action), but they can also be configured to act as non-interactive. Since non-interactive updates happen periodically, a forced-non-interactive update causes a non-interactive update at the moment of the request, not at a later time. We can call a forced non-interactive update with:

update_engine_client --interactive=false --check_for_update

Network

The updater client has the capability to download the payloads using Ethernet, WiFi, or Cellular networks depending on which one the device is connected to. Downloading over Cellular networks will prompt permission from the user as it can consume a considerable amount of data.

Logs

In Chrome OS the update_engine logs are located in /var/log/update_engine directory. Whenever update_engine starts, it starts a new log file with the current data-time format in the log file’s name (update_engine.log-DATE-TIME). Many log files can be seen in /var/log/update_engine after a few restarts of the update engine or after the system reboots. The latest active log is symlinked to /var/log/update_engine.log.

In Android the update_engine logs are located in /data/misc/update_engine_log.

Update Payload Generation

The update payload generation is the process of converting a set of partitions/files into a format that is both understandable by the updater client (especially if it's a much older version) and is securely verifiable. This process involves breaking the input partitions into smaller components and compressing them in order to help with network bandwidth when downloading the payloads.

delta_generator is a tool with a wide range of options for generating different types of update payloads. Its code is located in update_engine/payload_generator. This directory contains all the source code related to mechanics of generating an update payload. None of the files in this directory should be included or used in any other library/executable other than the delta_generator which means this directory does not get compiled into the rest of the update engine tools.

However, it is not recommended to use delta_generator directly, as it has way too many flags. Wrappers like ota_from_target_files or OTA Generator should be used.

Update Payload File Specification

Each update payload file has a specific structure defined in the table below:

Field Size (bytes) Type Description
Magic Number 4 char[4] Magic string "CrAU" identifying this is an update payload.
Major Version 8 uint64 Payload major version number.
Manifest Size 8 uint64 Manifest size in bytes.
Manifest Signature Size 4 uint32 Manifest signature blob size in bytes (only in major version 2).
Manifest Varies DeltaArchiveManifest The list of operations to be performed.
Manifest Signature Varies Signatures The signature of the first five fields. There could be multiple signatures if the key has changed.
Payload Data Varies List of raw or compressed data blobs The list of binary blobs used by operations in the metadata.
Payload Signature Size Varies uint64 The size of the payload signature.
Payload Signature Varies Signatures The signature of the entire payload except the metadata signature. There could be multiple signatures if the key has changed.

Delta vs. Full Update Payloads

There are two types of payload: Full and Delta. A full payload is generated solely from the target image (the image we want to update to) and has all the data necessary to update the inactive partition. Hence, full payloads can be quite large in size. A delta payload, on the other hand, is a differential update generated by comparing the source image (the active partitions) and the target image and producing the diffs between these two images. It is basically a differential update similar to applications like diff or bsdiff. Hence, updating the system using the delta payloads requires the system to read parts of the active partition in order to update the inactive partition (or reconstruct the target partition). The delta payloads are significantly smaller than the full payloads. The structure of the payload is equal for both types.

Payload generation is quite resource intensive and its tools are implemented with high parallelism.

Generating Full Payloads

A full payload is generated by breaking the partition into 2MiB (configurable) chunks and either compressing them using bzip2 or XZ algorithms or keeping it as raw data depending on which produces smaller data. Full payloads are much larger in comparison to delta payloads hence require longer download time if the network bandwidth is limited. On the other hand, full payloads are a bit faster to apply because the system doesn’t need to read data from the source partition.

Generating Delta Payloads

Delta payloads are generated by looking at both the source and target images data on a file and metadata basis (more precisely, the file system level on each appropriate partition). The reason we can generate delta payloads is that Chrome OS partitions are read only. So with high certainty we can assume the active partitions on the client’s device is bit-by-bit equal to the original partitions generated in the image generation/signing phase. The process for generating a delta payload is roughly as follows:

  1. Find all the zero-filled blocks on the target partition and produce ZERO operation for them. ZERO operation basically discards the associated blocks (depending on the implementation).
  2. Find all the blocks that have not changed between the source and target partitions by directly comparing one-to-one source and target blocks and produce SOURCE_COPY operation.
  3. List all the files (and their associated blocks) in the source and target partitions and remove blocks (and files) which we have already generated operations for in the last two steps. Assign the remaining metadata (inodes, etc) of each partition as a file.
  4. If a file is new, generate a REPLACE, REPLACE_XZ, or REPLACE_BZ operation for its data blocks depending on which one generates a smaller data blob.
  5. For each other file, compare the source and target blocks and produce a SOURCE_BSDIFF or PUFFDIFF operation depending on which one generates a smaller data blob. These two operations produce binary diffs between a source and target data blob. (Look at bsdiff and puffin for details of such binary differential programs!)
  6. Sort the operations based on their target partitions’ block offset.
  7. Optionally merge same or similar operations next to each other into larger operations for better efficiency and potentially smaller payloads.

Full payloads can only contain REPLACE, REPLACE_BZ, and REPLACE_XZ operations. Delta payloads can contain any operations.

Major and Minor versions

The major and minor versions specify the update payload file format and the capability of the updater client to accept certain types of update payloads respectively. These numbers are hard coded in the updater client.

Major version is basically the update payload file version specified in the update payload file specification above (second field). Each updater client supports a range of major versions. Currently, there are only two major versions: 1, and 2. And both Chrome OS and Android are on major version 2 (major version 1 is being deprecated). Whenever there are new additions that cannot be fitted in the Manifest protobuf, we need to uprev the major version. Upreving major version should be done with utmost care because older clients do not know how to handle the newer versions. Any major version uprev in Chrome OS should be associated with a GoldenEye stepping stone.

Minor version defines the capability of the updater client to accept certain operations or perform certain actions. Each updater client supports a range of minor versions. For example, the updater client with minor version 4 (or less) does not know how to handle a PUFFDIFF operation. So when generating a delta payload for an image which has an updater client with minor version 4 (or less) we cannot produce PUFFDIFF operation for it. The payload generation process looks at the source image’s minor version to decide the type of operations it supports and only a payload that confirms to those restrictions. Similarly, if there is a bug in a client with a specific minor version, an uprev in the minor version helps with avoiding to generate payloads that cause that bug to manifest. However, upreving minor versions is quite expensive too in terms of maintainability and it can be error prone. So one should practice caution when making such a change.

Minor versions are irrelevant in full payloads. Full payloads should always be able to be applied for very old clients. The reason is that the updater clients may not send their current version, so if we had different types of full payloads, we would not have known which version to serve to the client.

Signed vs Unsigned Payloads

Update payloads can be signed (with private/public key pairs) for use in production or be kept unsigned for use in testing. Tools like delta_generator help with generating metadata and payload hashes or signing the payloads given private keys.

update_payload Scripts

update_payload contains a set of python scripts used mostly to validate payload generation and application. We normally test the update payloads using an actual device (live tests). brillo_update_payload script can be used to generate and test applying of a payload on a host device machine. These tests can be viewed as dynamic tests without the need for an actual device. Other update_payload scripts (like check_update_payload) can be used to statically check that a payload is in the correct state and its application works correctly. These scripts actually apply the payload statically without running the code in payload_consumer.

Postinstall

Postinstall is a process called after the updater client writes the new image artifacts to the inactive partitions. One of postinstall's main responsibilities is to recreate the dm-verity tree hash at the end of the root partition. Among other things, it installs new firmware updates or any board specific processes. Postinstall runs in separate chroot inside the newly installed partition. So it is quite separated from the rest of the active running system. Anything that needs to be done after an update and before the device is rebooted, should be implemented inside the postinstall.

Building Update Engine

You can build update_engine the same as other platform applications:

Setup

Run these commands at top of Android repository before building anything. You only need to do this once per shell.

  • source build/envsetup.sh
  • lunch aosp_cf_x86_64_only_phone-userdebug (Or replace aosp_cf_x86_64_only_phone-userdebug with your own target)

Building

m update_engine update_engine_client delta_generator

Running Unit Tests

Running unit tests similar to other platforms:

  • atest update_engine_unittests You will need a device connected to your laptop and accessible via ADB to do this. Cuttlefish works as well.
  • atest update_engine_host_unittests Run a subset of tests on host, no device required.

Initiating a Configured Update

There are different methods to initiate an update:

  • Click on the “Check For Update” button in setting’s About page. There is no way to configure this way of update check.
  • Use the [scripts/update_device.py] program and pass a path to your OTA zip file.

Note to Developers and Maintainers

When changing the update engine source code be extra careful about these things:

Do NOT Break Backward Compatibility

At each release cycle we should be able to generate full and delta payloads that can correctly be applied to older devices that run older versions of the update engine client. So for example, removing or not passing arguments in the metadata proto file might break older clients. Or passing operations that are not understood in older clients will break them. Whenever changing anything in the payload generation process, ask yourself this question: Would it work on older clients? If not, do I need to control it with minor versions or any other means.

Especially regarding enterprise rollback, a newer updater client should be able to accept an older update payload. Normally this happens using a full payload, but care should be taken in order to not break this compatibility.

Think About The Future

When creating a change in the update engine, think about 5 years from now:

  • How can the change be implemented that five years from now older clients don’t break?
  • How is it going to be maintained five years from now?
  • How can it make it easier for future changes without breaking older clients or incurring heavy maintenance costs?

Prefer Not To Implement Your Feature In The Updater Client

If a feature can be implemented from server side, Do NOT implement it in the client updater. Because the client updater can be fragile at points and small mistakes can have catastrophic consequences. For example, if a bug is introduced in the updater client that causes it to crash right before checking for update and we can't quite catch this bug early in the release process, then the production devices which have already moved to the new buggy system, may no longer receive automatic updates anymore. So, always think if the feature is being implemented can be done form the server side (with potentially minimal changes to the client updater)? Or can the feature be moved to another service with minimal interface to the updater client. Answering these questions will pay off greatly in the future.

Be Respectful Of Other Code Bases

~~The current update engine code base is used in many projects like Android.~~~

The Android and ChromeOS codebase have officially diverged.

We sync the code base among these two projects frequently. Try to not break Android or other systems that share the update engine code. Whenever landing a change, always think about whether Android needs that change:

  • How will it affect Android?
  • Can the change be moved to an interface and stubs implementations be implemented so as not to affect Android?
  • Can Chrome OS or Android specific code be guarded by macros?

As a basic measure, if adding/removing/renaming code, make sure to change both build.gn and Android.bp. Do not bring Chrome OS specific code (for example other libraries that live in system_api or dlcservice) into the common code of update_engine. Try to separate these concerns using best software engineering practices.

Merging from Android (or other code bases)

Chrome OS tracks the Android code as an upstream branch. To merge the Android code to Chrome OS (or vice versa) just do a git merge of that branch into Chrome OS, test it using whatever means and upload a merge commit.

repo start merge-aosp
git merge --no-ff --strategy=recursive -X patience cros/upstream
repo upload --cbr --no-verify .

About

No description, website, or topics provided.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published