Skip to content

LeandroMartinsdS/DiscreteControl.jl

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

34 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

DiscretePIDs

Build Status Coverage

This package implements a discrete-time PID controller on the form $$U(s) = K \left( bR(s) - Y(s) + \dfrac{1}{sT_i} \left( R(s) - Y(s) \right) - \dfrac{sT_d}{1 + s T_d / N}Y(s) \right) + U_\textrm{ff}(s)$$

where

  • $u(t) \leftrightarrow U(s)$ is the control signal
  • $y(t) \leftrightarrow Y(s)$ is the measurement signal
  • $r(t) \leftrightarrow R(s)$ is the reference / set point
  • $u_\textrm{ff}(t) \leftrightarrow U_\textrm{ff}(s)$ is the feed-forward contribution
  • $K$ is the proportional gain
  • $T_i$ is the integral time
  • $T_d$ is the derivative time
  • $N$ is the maximum derivative gain
  • $b \in [0, 1]$ is the proportion of the reference signal that appears in the proportional term.

The controller further has output saturation controlled by umin, umax and integrator anti-windup controlled by the tracking time $T_t$.

Construct a controller using

pid = DiscretePID(; K = 1, Ti = false, Td = false, Tt = (Ti*Td), N = 10, b = 1, umin = -Inf, umax = Inf, Ts, I = 0, D = 0, yold = 0)

and compute a control signal using

u = pid(r, y, uff)

or

u = calculate_control!(pid, r, y, uff)

The parameters $K, T_i, T_d$ may be updated using the functions, set_K!, set_Ti!, set_Td!.

The numeric type used by the controller (the T in DiscretePID{T}) is determined by the types of the parameters. To use a custom number type, e.g., a fixed-point number type, simply pass the parameters as that type, see example below. The controller will automatically convert measurements and references to this type before performing the control calculations.

Example using ControlSystems:

The following example simulates the PID controller using ControlSystems.jl. We will simulate a load disturbance $d(t) = 1$ entering on the process input, while the reference is $r(t) = 0$.

using DiscretePIDs, ControlSystemsBase, Plots
Tf = 15   # Simulation time
K  = 1    # Proportional gain
Ti = 1    # Integral time
Td = 1    # Derivative time
Ts = 0.01 # sample time

P   = c2d(ss(tf(1, [1, 1])), Ts) # Process to be controlled, discretized using zero-order hold
pid = DiscretePID(; K, Ts, Ti, Td)

ctrl = function(x,t)
    y = (P.C*x)[] # measurement
    d = 1         # disturbance
    r = 0         # reference
    u = pid(r, y)
    u + d # Plant input is control signal + disturbance
end

res = lsim(P, ctrl, Tf)

plot(res, plotu=true); ylabel!("u + d", sp=2)

Simulation result

In this case, we simulated a linear plant, in which case we get an exact result using ControlSystems.lsim. Below, we show two methods for simulation of the controller that works also when the plant is nonlinear (but we will still use the linear system here for comparison).

Example using DifferentialEquations:

The following example is identical to the one above, but uses DifferentialEquations.jl to simulate the PID controller. This is useful if you want to simulate the controller in a more complex system, e.g., with a nonlinear plant.

There are several different ways one could go about including a discrete-time controller in a continuous-time simulation, in particular, we must choose a way to store the computed control signal

  1. Use a global variable into which we write the control signal at each discrete time step.
  2. Add an extra state variable to the system, and use this state to store the control signal. This is the approach taken in the example below since it has the added benefit of adding the computed control signal to the solution object.

We will use a DiffEqCallbacks.PeriodicCallback in which we perform the PID-controller update, and store the computed control signal in the extra state variable.

using DiscretePIDs, ControlSystemsBase, OrdinaryDiffEq, DiffEqCallbacks, Plots

Tf = 15   # Simulation time
K  = 1    # Proportional gain
Ti = 1    # Integral time
Td = 1    # Derivative time
Ts = 0.01 # sample time

P = ss(tf(1, [1, 1]))  # Process to be controlled in continuous time
A, B, C, D = ssdata(P) # Extract the system matrices
pid = DiscretePID(; K, Ts, Ti, Td)

function dynamics!(dxu, xu, p, t)
    A, B, C, r, d = p   # We store the reference and disturbance in the parameter object
    x = xu[1:P.nx]      # Extract the state
    u = xu[P.nx+1:end]  # Extract the control signal
    dxu[1:P.nx] .= A*x .+ B*(u .+ d) # Plant input is control signal + disturbance
    dxu[P.nx+1:end] .= 0             # The control signal has no dynamics, it's updated by the callback
end

cb = PeriodicCallback(Ts) do integrator
    p = integrator.p    # Extract the parameter object from the integrator
    (; C, r, d) = p     # Extract the reference and disturbance from the parameter object
    x = integrator.u[1:P.nx] # Extract the state (the integrator uses the variable name `u` to refer to the state, in control theory we typically use the variable name `x`)
    y = (C*x)[]         # Simulated measurement
    u = pid(r, y)       # Compute the control signal
    integrator.u[P.nx+1:end] .= u # Update the control-signal state variable 
end

parameters = (; A, B, C, r=0, d=1) # reference = 0, disturbance = 1
xu0 = zeros(P.nx + P.nu) # Initial state of the system + control signals
prob = ODEProblem(dynamics!, xu0, (0, Tf), parameters, callback=cb) # reference = 0, disturbance = 1
sol = solve(prob, Tsit5(), saveat=Ts)

plot(sol, layout=(2, 1), ylabel=["x" "u"], lab="")

The figure should look more or less identical to the one above, except that we plot the control signal $u$ instead of the combined input $u + d$ like we did above. Due to the fast sample rate $T_s$, the control signal looks continuous, however, increase $T_s$ and you'll notice the zero-order-hold nature of $u$.

Example using SeeToDee:

SeeToDee.jl is a library of fixed time-step integrators that take inputs as function arguments and are useful for manual simulation of control systems. The same example as above is simulated using SeeToDee.Rk4 below. The call to

discrete_dynamics = SeeToDee.Rk4(dynamics, Ts)

converts the continuous-time dynamics function

$$\dot x = f(x, u, p, t)$$

into a discrete-time version

$$x_{t+T_s} = f(x_t, u_t, p, t)$$

that we can use to advance the state of the system forward in time in a loop.

using DiscretePIDs, ControlSystemsBase, SeeToDee, Plots
Tf = 15   # Simulation time
K  = 1    # Proportional gain
Ti = 1    # Integral time
Td = 1    # Derivative time
Ts = 0.01 # sample time
P  = ss(tf(1, [1, 1]))    # Process to be controlled, in continuous time
A,B,C = ssdata(P)         # Extract the system matrices
p = (; A, B, C, r=0, d=1) # reference = 0, disturbance = 1

pid = DiscretePID(; K, Ts, Ti, Td)

ctrl = function(x,p,t)
    y = (p.C*x)[]   # measurement
    pid(r, y)
end

function dynamics(x, u, p, t) # This time we define the dynamics as a function of the state and control signal
    A, B, C, r, d = p   # We store the reference and disturbance in the parameter object
    A*x .+ B*(u .+ d) # Plant input is control signal + disturbance
end
discrete_dynamics = SeeToDee.Rk4(dynamics, Ts) # Create a discrete-time dynamics function

x = zeros(P.nx) # Initial condition
X, U = [], []   # To store the solution 
t = range(0, step=Ts, stop=Tf) # Time vector
for t = t
    u = ctrl(x, p, t)
    push!(U, u) # Save solution for plotting
    push!(X, x)
    x = discrete_dynamics(x, u, p, t) # Advance the state one step
end

Xm = reduce(hcat, X)' # Reduce to from vector of vectors to matrix
Ym = Xm*P.C'          # Compute the output (same as state in this simple case)
Um = reduce(hcat, U)'

plot(t, [Ym Um], layout=(2,1), ylabel = ["y" "u"], legend=false)

Once again, the output looks identical and is omitted here.

Details

  • The derivative term only acts on the (filtered) measurement and not the command signal. It is thus safe to pass step changes in the reference to the controller. The parameter $b$ can further be set to zero to avoid step changes in the control signal in response to step changes in the reference.
  • Bumpless transfer when updating K is realized by updating the state I. See the docs for set_K! for more details.
  • The total control signal $u(t)$ (PID + feed-forward) is limited by the integral anti-windup.
  • The integrator is discretized using a forward difference (no direct term between the input and output through the integral state) while the derivative is discretized using a backward difference.
  • This particular implementation of a discrete-time PID controller is detailed in Ch 8 of "Computer Control: An Overview (IFAC professional brief)", Wittenmark, Åström, Årzén.
  • When used with input arguments of standard types, such as Float64 or Float32, the controller is guaranteed not to allocate any memory or contain any dynamic dispatches. This analysis is carried out in the tests, and is performed using AllocCheck.jl.

Simulation of fixed-point arithmetic

If the controller is ultimately to be implemented on a platform without floating-point hardware, you can simulate how it will behave with fixed-point arithmetics using the FixedPointNumbers package. The following example modifies the first example above and shows how to simulate the controller using 16-bit fixed-point arithmetics with 10 bits for the fractional part:

using FixedPointNumbers
T = Fixed{Int16, 10} # 16-bit fixed-point with 10 bits for the fractional part
pid = DiscretePID(; K = T(K), Ts = T(Ts), Ti = T(Ti), Td = T(Td))
res_fp = lsim(P, ctrl, Tf)
plot([res, res_fp], plotu=true, lab=["Float64" "" string(T) ""]); ylabel!("u + d", sp=2)

Fixed-point simulation result

The fixed-point controller behaves roughly the same in this case, but artifacts are clearly visible. If the number of bits used for the fractional part is decreased, the controller will start to misbehave.

See also

  • TrajectoryLimiters.jl To generate dynamically feasible reference trajectories with bounded velocity and acceleration given an instantaneous reference $r(t)$ which may change abruptly.
  • SymbolicControlSystems.jl For C-code generation of LTI systems.

About

Discrete-time controllers in Julia

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Julia 100.0%