Xiaomi Aqara C1 Pet Feeder (ZNCWWSQ01LM) Various Problems #17148
Labels
problem
Something isn't working
Comments
|
One more from a new device while pairing: |
eikowagenknecht
changed the title
|
Another problem: Firmware version is not shown in UI: State: OTA page: No version shown
Updating works though as far as I can see. |
|
After editing the schedule partially (e.g. minutes field only), the button to save is grayed out:
It only becomes active after changing all 4 fields (day, hour, minute, portions) to something else each and then back again. |
|
Turning the "LED indicator" setting on and off has no effect on the device whatsoever:
|
|
The properties are named in a confusing way. It would be better to name them as ZHA does:
Should be
|
|
Values are not checked at all. Minutes can be set to >=60 or <0
|
|
It is unclear in which time zone the schedule operates. From observation it seems to be my local time zone (CEST), but how will it handle summer / wintertime changes for example? This should be at least documented somewhere. |
|
And another one: If the feeding size is set to 10 then the "last feeding" ist shown as Null:
|
it appears to me it was GMT time (I am GMT+3 currently). Will wait for day to end and verify by checking when "feeder portions per day" does it's reset. |
|
for a reference, this is my setup. Also observed similar "Unhandled attribute" errors upon binding. But it succeeded eventually, after few attempts. Then was able to do OTA fw upgrade. But looks like saved ok and is working now. Zigbee2MQTT version: 1.29.2 |
|
This issue is stale because it has been open 30 days with no activity. Remove stale label or comment or this will be closed in 7 days |
|
Still current |
|
I have the greyed out schedule and LED indicator non functioning issues you have mentioned. Seems prevalent if you view some of the stale/closed non resolved issues in the repo. Hopefully someone with experience can assist. |
|
This issue is stale because it has been open 30 days with no activity. Remove stale label or comment or this will be closed in 7 days |
|
bump |
|
Bought a C1 yesterday. Same error's on my side: 1: Led indicator enable/disable not working |
|
This issue is stale because it has been open 30 days with no activity. Remove stale label or comment or this will be closed in 7 days |
|
Bump |
|
This issue is stale because it has been open 30 days with no activity. Remove stale label or comment or this will be closed in 7 days |
|
bump |
|
I'm seeing unhandled error messages with any change I make to the pet feeder in Z2M. |
|
@Koenkk Can you help us or maybe do you know someone else who can help fix these problems? With every zigbee2mqtt update, I am hoping to see fixes for the C1 pet feeder. If I can help you in any way, please let me know :) |
|
@jeells102 coud you provide the herdsman debug log of the following error? See this on how to enable the herdsman debug logging. Note that this is only logged to STDOUT and not to log files. |
|
@Koenkk Hopefully below provides you with what you need. |
Koenkk
added a commit
to Koenkk/zigbee-herdsman-converters
that referenced
this issue
Jan 19, 2024
|
@jeells102 fixed! Changes will be available in the dev branch in a few hours from now. |
|
@Koenkk That's amazing news! Thanks for working on this. Again, once this is released into production I'll test and let you know. |
|
@Koenkk Thank you for fixing this issue! Will test this when it is in production. |
|
I've just updated to 1.35.2 |
|
@Koenkk I have updated and unfortuntely, my Zigbee network is still crashing with the pet feeders added. |
Koenkk
added a commit
to Koenkk/zigbee-herdsman-converters
that referenced
this issue
Feb 3, 2024
|
@jeells102 found the issue and pushed a fix for it. Changes will be available in the dev branch in a few hours from now. |
|
@Koenkk That was incredibly quick! Thanks so much. Will need to wait till it's out in production but will let you know. Thank you |
|
@Koenkk I've been using the new update and I've not had any issues! Thanks so much for fixing this :) |
|
@Koenkk Thank you so much for making these fixes! There is only 1 thing I noticed: when I set the Led indicator to false it is ON. When I set it to ON it is off 🤣 no big deal. But an easy fix, or am I the only one having this issue. |
Koenkk
added a commit
to Koenkk/zigbee-herdsman-converters
that referenced
this issue
Mar 4, 2024
|
@thbrd fixed! Changes will be available in the dev branch in a few hours from now. |
|
@Koenkk in 1.36.0, when I try to set more the five schedules, starting from the 6th I got this error (both zigbee2mqtt UI and MQTT publish): Publish 'set' 'schedule' to 'Smart Pet Feeder' failed: 'Error: Write 0x54ef44100077fc1a/1 manuSpecificLumi({"65521":{"value":{"type":"Buffer","data":[0,2,3,8,0,8,200,66,55,102,49,54,49,101,48,49,48,48,44,55,102,48,53,49,101,48,49,48,48,44,55,102,48,55,49,101,48,49,48,48,44,55,102,48,98,48,48,48,49,48,48,44,55,102,49,50,49,101,48,49,48,48,44,55,102,48,101,49,101,48,50,48,48,0]},"type":65}}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":4447,"transactionSequenceNumber":null,"writeUndiv":false}) failed (sendZclFrameToEndpointInternal error)' 5 schedules are working well can you help me? |
|
@lorenzomartini1 I don't know how many schedules this device supports. |
|
I don't know how many schedules this device supports but it is at least 6. You can look at this test of the product: https://www.lesnumeriques.com/objet-connecte/aqara-smart-pet-feeder-c1-p71951/test.html . You can see here a test with 6 schedules. |
|
thanks for great work so far. is it possible to change the "Feed" entity from a Dropdown into a Button, cause the problem is, it feeds also when dropdown is change to "nothing". Thats makes no sense.
|
|
Ok, main issue I'm seeing is that it doesn't show any error status at all, so no report if the food is empty. Any way to fix this? I'm happy to take a look but not sure where to start 😄 |
|
The dispenser does not have any sensor signaling that there are no more food in the tank. |
|
Oh right, ok, that's a bit of a pita but explains things! :) |
|
Apart from that it is a very good automatic food dispenser, it never jams and the portions are very consistent (in terms of weight). |
|
Yeh, seems that way so far, had a petkit one that was giving me loads of problems. Nice excuse for me to play around with building an esphome weight sensor 👍 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
What happened?
During interview, errors are shown for unknown attributes and the following is logged:
What did you expect to happen?
No errors in the interview process. If the attributes don't need to be handled, the log level should be lower (=no red dialog popping up). Also "��� = d" reads broken, maybe some charset or value representation went wrong?
How to reproduce it (minimal and precise)
Reset device, then pair it
Zigbee2MQTT version
1.30.2
Adapter firmware version
20221226
Adapter
zStack3x0
Debug log
No response
The text was updated successfully, but these errors were encountered: