kafl-agent: Fix fuzzing dump of __user pointers #2
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
KASAN threw an error on accessing user pointers when fuzzing. This patch now distinguishes between kernel pointers and user pointers to avoid false positive KASAN triggers.
|
-3 is old/outdated version, fixed in -4 |
Wenzel
pushed a commit
that referenced
this pull request
Jan 17, 2023
Prior to commit 4149be7, sys_flock() would allocate the file_lock struct it was going to use to pass parameters, call ->flock() and then call locks_free_lock() to get rid of it - which had the side effect of calling locks_release_private() and thus ->fl_release_private(). With commit 4149be7, however, this is no longer the case: the struct is now allocated on the stack, and locks_free_lock() is no longer called - and thus any remaining private data doesn't get cleaned up either. This causes afs flock to cause oops. Kasan catches this as a UAF by the list_del_init() in afs_fl_release_private() for the file_lock record produced by afs_fl_copy_lock() as the original record didn't get delisted. It can be reproduced using the generic/504 xfstest. Fix this by reinstating the locks_release_private() call in sys_flock(). I'm not sure if this would affect any other filesystems. If not, then the release could be done in afs_flock() instead. Changes ======= ver #2) - Don't need to call ->fl_release_private() after calling the security hook, only after calling ->flock(). Fixes: 4149be7 ("fs/lock: Don't allocate file_lock in flock_make_lock().") cc: Chuck Lever <chuck.lever@oracle.com> cc: Jeff Layton <jlayton@kernel.org> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/166075758809.3532462.13307935588777587536.stgit@warthog.procyon.org.uk/ # v1 Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org>
Wenzel
pushed a commit
that referenced
this pull request
Jan 17, 2023
The lag_lock is taken from both process and softirq contexts which results lockdep warning[0] about potential deadlock. However, just disabling softirqs by using *_bh spinlock API is not enough since it will cause warning in some contexts where the lock is obtained with hard irqs disabled. To fix the issue save current irq state, disable them before obtaining the lock an re-enable irqs from saved state after releasing it. [0]: [Sun Aug 7 13:12:29 2022] ================================ [Sun Aug 7 13:12:29 2022] WARNING: inconsistent lock state [Sun Aug 7 13:12:29 2022] 5.19.0_for_upstream_debug_2022_08_04_16_06 #1 Not tainted [Sun Aug 7 13:12:29 2022] -------------------------------- [Sun Aug 7 13:12:29 2022] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [Sun Aug 7 13:12:29 2022] swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [Sun Aug 7 13:12:29 2022] ffffffffa06dc0d8 (lag_lock){+.?.}-{2:2}, at: mlx5_lag_is_shared_fdb+0x1f/0x120 [mlx5_core] [Sun Aug 7 13:12:29 2022] {SOFTIRQ-ON-W} state was registered at: [Sun Aug 7 13:12:29 2022] lock_acquire+0x1c1/0x550 [Sun Aug 7 13:12:29 2022] _raw_spin_lock+0x2c/0x40 [Sun Aug 7 13:12:29 2022] mlx5_lag_add_netdev+0x13b/0x480 [mlx5_core] [Sun Aug 7 13:12:29 2022] mlx5e_nic_enable+0x114/0x470 [mlx5_core] [Sun Aug 7 13:12:29 2022] mlx5e_attach_netdev+0x30e/0x6a0 [mlx5_core] [Sun Aug 7 13:12:29 2022] mlx5e_resume+0x105/0x160 [mlx5_core] [Sun Aug 7 13:12:29 2022] mlx5e_probe+0xac3/0x14f0 [mlx5_core] [Sun Aug 7 13:12:29 2022] auxiliary_bus_probe+0x9d/0xe0 [Sun Aug 7 13:12:29 2022] really_probe+0x1e0/0xaa0 [Sun Aug 7 13:12:29 2022] __driver_probe_device+0x219/0x480 [Sun Aug 7 13:12:29 2022] driver_probe_device+0x49/0x130 [Sun Aug 7 13:12:29 2022] __driver_attach+0x1e4/0x4d0 [Sun Aug 7 13:12:29 2022] bus_for_each_dev+0x11e/0x1a0 [Sun Aug 7 13:12:29 2022] bus_add_driver+0x3f4/0x5a0 [Sun Aug 7 13:12:29 2022] driver_register+0x20f/0x390 [Sun Aug 7 13:12:29 2022] __auxiliary_driver_register+0x14e/0x260 [Sun Aug 7 13:12:29 2022] mlx5e_init+0x38/0x90 [mlx5_core] [Sun Aug 7 13:12:29 2022] vhost_iotlb_itree_augment_rotate+0xcb/0x180 [vhost_iotlb] [Sun Aug 7 13:12:29 2022] do_one_initcall+0xc4/0x400 [Sun Aug 7 13:12:29 2022] do_init_module+0x18a/0x620 [Sun Aug 7 13:12:29 2022] load_module+0x563a/0x7040 [Sun Aug 7 13:12:29 2022] __do_sys_finit_module+0x122/0x1d0 [Sun Aug 7 13:12:29 2022] do_syscall_64+0x3d/0x90 [Sun Aug 7 13:12:29 2022] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [Sun Aug 7 13:12:29 2022] irq event stamp: 3596508 [Sun Aug 7 13:12:29 2022] hardirqs last enabled at (3596508): [<ffffffff813687c2>] __local_bh_enable_ip+0xa2/0x100 [Sun Aug 7 13:12:29 2022] hardirqs last disabled at (3596507): [<ffffffff813687da>] __local_bh_enable_ip+0xba/0x100 [Sun Aug 7 13:12:29 2022] softirqs last enabled at (3596488): [<ffffffff81368a2a>] irq_exit_rcu+0x11a/0x170 [Sun Aug 7 13:12:29 2022] softirqs last disabled at (3596495): [<ffffffff81368a2a>] irq_exit_rcu+0x11a/0x170 [Sun Aug 7 13:12:29 2022] other info that might help us debug this: [Sun Aug 7 13:12:29 2022] Possible unsafe locking scenario: [Sun Aug 7 13:12:29 2022] CPU0 [Sun Aug 7 13:12:29 2022] ---- [Sun Aug 7 13:12:29 2022] lock(lag_lock); [Sun Aug 7 13:12:29 2022] <Interrupt> [Sun Aug 7 13:12:29 2022] lock(lag_lock); [Sun Aug 7 13:12:29 2022] *** DEADLOCK *** [Sun Aug 7 13:12:29 2022] 4 locks held by swapper/0/0: [Sun Aug 7 13:12:29 2022] #0: ffffffff84643260 (rcu_read_lock){....}-{1:2}, at: mlx5e_napi_poll+0x43/0x20a0 [mlx5_core] [Sun Aug 7 13:12:29 2022] #1: ffffffff84643260 (rcu_read_lock){....}-{1:2}, at: netif_receive_skb_list_internal+0x2d7/0xd60 [Sun Aug 7 13:12:29 2022] #2: ffff888144a18b58 (&br->hash_lock){+.-.}-{2:2}, at: br_fdb_update+0x301/0x570 [Sun Aug 7 13:12:29 2022] #3: ffffffff84643260 (rcu_read_lock){....}-{1:2}, at: atomic_notifier_call_chain+0x5/0x1d0 [Sun Aug 7 13:12:29 2022] stack backtrace: [Sun Aug 7 13:12:29 2022] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0_for_upstream_debug_2022_08_04_16_06 #1 [Sun Aug 7 13:12:29 2022] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [Sun Aug 7 13:12:29 2022] Call Trace: [Sun Aug 7 13:12:29 2022] <IRQ> [Sun Aug 7 13:12:29 2022] dump_stack_lvl+0x57/0x7d [Sun Aug 7 13:12:29 2022] mark_lock.part.0.cold+0x5f/0x92 [Sun Aug 7 13:12:29 2022] ? lock_chain_count+0x20/0x20 [Sun Aug 7 13:12:29 2022] ? unwind_next_frame+0x1c4/0x1b50 [Sun Aug 7 13:12:29 2022] ? secondary_startup_64_no_verify+0xcd/0xdb [Sun Aug 7 13:12:29 2022] ? mlx5e_napi_poll+0x4e9/0x20a0 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? mlx5e_napi_poll+0x4e9/0x20a0 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? stack_access_ok+0x1d0/0x1d0 [Sun Aug 7 13:12:29 2022] ? start_kernel+0x3a7/0x3c5 [Sun Aug 7 13:12:29 2022] __lock_acquire+0x1260/0x6720 [Sun Aug 7 13:12:29 2022] ? lock_chain_count+0x20/0x20 [Sun Aug 7 13:12:29 2022] ? lock_chain_count+0x20/0x20 [Sun Aug 7 13:12:29 2022] ? register_lock_class+0x1880/0x1880 [Sun Aug 7 13:12:29 2022] ? mark_lock.part.0+0xed/0x3060 [Sun Aug 7 13:12:29 2022] ? stack_trace_save+0x91/0xc0 [Sun Aug 7 13:12:29 2022] lock_acquire+0x1c1/0x550 [Sun Aug 7 13:12:29 2022] ? mlx5_lag_is_shared_fdb+0x1f/0x120 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? lockdep_hardirqs_on_prepare+0x400/0x400 [Sun Aug 7 13:12:29 2022] ? __lock_acquire+0xd6f/0x6720 [Sun Aug 7 13:12:29 2022] _raw_spin_lock+0x2c/0x40 [Sun Aug 7 13:12:29 2022] ? mlx5_lag_is_shared_fdb+0x1f/0x120 [mlx5_core] [Sun Aug 7 13:12:29 2022] mlx5_lag_is_shared_fdb+0x1f/0x120 [mlx5_core] [Sun Aug 7 13:12:29 2022] mlx5_esw_bridge_rep_vport_num_vhca_id_get+0x1a0/0x600 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? mlx5_esw_bridge_update_work+0x90/0x90 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? lock_acquire+0x1c1/0x550 [Sun Aug 7 13:12:29 2022] mlx5_esw_bridge_switchdev_event+0x185/0x8f0 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? mlx5_esw_bridge_port_obj_attr_set+0x3e0/0x3e0 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? check_chain_key+0x24a/0x580 [Sun Aug 7 13:12:29 2022] atomic_notifier_call_chain+0xd7/0x1d0 [Sun Aug 7 13:12:29 2022] br_switchdev_fdb_notify+0xea/0x100 [Sun Aug 7 13:12:29 2022] ? br_switchdev_set_port_flag+0x310/0x310 [Sun Aug 7 13:12:29 2022] fdb_notify+0x11b/0x150 [Sun Aug 7 13:12:29 2022] br_fdb_update+0x34c/0x570 [Sun Aug 7 13:12:29 2022] ? lock_chain_count+0x20/0x20 [Sun Aug 7 13:12:29 2022] ? br_fdb_add_local+0x50/0x50 [Sun Aug 7 13:12:29 2022] ? br_allowed_ingress+0x5f/0x1070 [Sun Aug 7 13:12:29 2022] ? check_chain_key+0x24a/0x580 [Sun Aug 7 13:12:29 2022] br_handle_frame_finish+0x786/0x18e0 [Sun Aug 7 13:12:29 2022] ? check_chain_key+0x24a/0x580 [Sun Aug 7 13:12:29 2022] ? br_handle_local_finish+0x20/0x20 [Sun Aug 7 13:12:29 2022] ? __lock_acquire+0xd6f/0x6720 [Sun Aug 7 13:12:29 2022] ? sctp_inet_bind_verify+0x4d/0x190 [Sun Aug 7 13:12:29 2022] ? xlog_unpack_data+0x2e0/0x310 [Sun Aug 7 13:12:29 2022] ? br_handle_local_finish+0x20/0x20 [Sun Aug 7 13:12:29 2022] br_nf_hook_thresh+0x227/0x380 [br_netfilter] [Sun Aug 7 13:12:29 2022] ? setup_pre_routing+0x460/0x460 [br_netfilter] [Sun Aug 7 13:12:29 2022] ? br_handle_local_finish+0x20/0x20 [Sun Aug 7 13:12:29 2022] ? br_nf_pre_routing_ipv6+0x48b/0x69c [br_netfilter] [Sun Aug 7 13:12:29 2022] br_nf_pre_routing_finish_ipv6+0x5c2/0xbf0 [br_netfilter] [Sun Aug 7 13:12:29 2022] ? br_handle_local_finish+0x20/0x20 [Sun Aug 7 13:12:29 2022] br_nf_pre_routing_ipv6+0x4c6/0x69c [br_netfilter] [Sun Aug 7 13:12:29 2022] ? br_validate_ipv6+0x9e0/0x9e0 [br_netfilter] [Sun Aug 7 13:12:29 2022] ? br_nf_forward_arp+0xb70/0xb70 [br_netfilter] [Sun Aug 7 13:12:29 2022] ? br_nf_pre_routing+0xacf/0x1160 [br_netfilter] [Sun Aug 7 13:12:29 2022] br_handle_frame+0x8a9/0x1270 [Sun Aug 7 13:12:29 2022] ? br_handle_frame_finish+0x18e0/0x18e0 [Sun Aug 7 13:12:29 2022] ? register_lock_class+0x1880/0x1880 [Sun Aug 7 13:12:29 2022] ? br_handle_local_finish+0x20/0x20 [Sun Aug 7 13:12:29 2022] ? bond_handle_frame+0xf9/0xac0 [bonding] [Sun Aug 7 13:12:29 2022] ? br_handle_frame_finish+0x18e0/0x18e0 [Sun Aug 7 13:12:29 2022] __netif_receive_skb_core+0x7c0/0x2c70 [Sun Aug 7 13:12:29 2022] ? check_chain_key+0x24a/0x580 [Sun Aug 7 13:12:29 2022] ? generic_xdp_tx+0x5b0/0x5b0 [Sun Aug 7 13:12:29 2022] ? __lock_acquire+0xd6f/0x6720 [Sun Aug 7 13:12:29 2022] ? register_lock_class+0x1880/0x1880 [Sun Aug 7 13:12:29 2022] ? check_chain_key+0x24a/0x580 [Sun Aug 7 13:12:29 2022] __netif_receive_skb_list_core+0x2d7/0x8a0 [Sun Aug 7 13:12:29 2022] ? lock_acquire+0x1c1/0x550 [Sun Aug 7 13:12:29 2022] ? process_backlog+0x960/0x960 [Sun Aug 7 13:12:29 2022] ? lockdep_hardirqs_on_prepare+0x129/0x400 [Sun Aug 7 13:12:29 2022] ? kvm_clock_get_cycles+0x14/0x20 [Sun Aug 7 13:12:29 2022] netif_receive_skb_list_internal+0x5f4/0xd60 [Sun Aug 7 13:12:29 2022] ? do_xdp_generic+0x150/0x150 [Sun Aug 7 13:12:29 2022] ? mlx5e_poll_rx_cq+0xf6b/0x2960 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? mlx5e_poll_ico_cq+0x3d/0x1590 [mlx5_core] [Sun Aug 7 13:12:29 2022] napi_complete_done+0x188/0x710 [Sun Aug 7 13:12:29 2022] mlx5e_napi_poll+0x4e9/0x20a0 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? __queue_work+0x53c/0xeb0 [Sun Aug 7 13:12:29 2022] __napi_poll+0x9f/0x540 [Sun Aug 7 13:12:29 2022] net_rx_action+0x420/0xb70 [Sun Aug 7 13:12:29 2022] ? napi_threaded_poll+0x470/0x470 [Sun Aug 7 13:12:29 2022] ? __common_interrupt+0x79/0x1a0 [Sun Aug 7 13:12:29 2022] __do_softirq+0x271/0x92c [Sun Aug 7 13:12:29 2022] irq_exit_rcu+0x11a/0x170 [Sun Aug 7 13:12:29 2022] common_interrupt+0x7d/0xa0 [Sun Aug 7 13:12:29 2022] </IRQ> [Sun Aug 7 13:12:29 2022] <TASK> [Sun Aug 7 13:12:29 2022] asm_common_interrupt+0x22/0x40 [Sun Aug 7 13:12:29 2022] RIP: 0010:default_idle+0x42/0x60 [Sun Aug 7 13:12:29 2022] Code: c1 83 e0 07 48 c1 e9 03 83 c0 03 0f b6 14 11 38 d0 7c 04 84 d2 75 14 8b 05 6b f1 22 02 85 c0 7e 07 0f 00 2d 80 3b 4a 00 fb f4 <c3> 48 c7 c7 e0 07 7e 85 e8 21 bd 40 fe eb de 66 66 2e 0f 1f 84 00 [Sun Aug 7 13:12:29 2022] RSP: 0018:ffffffff84407e18 EFLAGS: 00000242 [Sun Aug 7 13:12:29 2022] RAX: 0000000000000001 RBX: ffffffff84ec4a68 RCX: 1ffffffff0afc0fc [Sun Aug 7 13:12:29 2022] RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffffffff835b1fac [Sun Aug 7 13:12:29 2022] RBP: 0000000000000000 R08: 0000000000000001 R09: ffff8884d2c44ac3 [Sun Aug 7 13:12:29 2022] R10: ffffed109a588958 R11: 00000000ffffffff R12: 0000000000000000 [Sun Aug 7 13:12:29 2022] R13: ffffffff84efac20 R14: 0000000000000000 R15: dffffc0000000000 [Sun Aug 7 13:12:29 2022] ? default_idle_call+0xcc/0x460 [Sun Aug 7 13:12:29 2022] default_idle_call+0xec/0x460 [Sun Aug 7 13:12:29 2022] do_idle+0x394/0x450 [Sun Aug 7 13:12:29 2022] ? arch_cpu_idle_exit+0x40/0x40 [Sun Aug 7 13:12:29 2022] cpu_startup_entry+0x19/0x20 [Sun Aug 7 13:12:29 2022] rest_init+0x156/0x250 [Sun Aug 7 13:12:29 2022] arch_call_rest_init+0xf/0x15 [Sun Aug 7 13:12:29 2022] start_kernel+0x3a7/0x3c5 [Sun Aug 7 13:12:29 2022] secondary_startup_64_no_verify+0xcd/0xdb [Sun Aug 7 13:12:29 2022] </TASK> Fixes: ff9b752 ("net/mlx5: Bridge, support LAG") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Wenzel
pushed a commit
that referenced
this pull request
Jan 17, 2023
Add a lock_class_key per mlx5 device to avoid a false positive "possible circular locking dependency" warning by lockdep, on flows which lock more than one mlx5 device, such as adding SF. kernel log: ====================================================== WARNING: possible circular locking dependency detected 5.19.0-rc8+ #2 Not tainted ------------------------------------------------------ kworker/u20:0/8 is trying to acquire lock: ffff88812dfe0d98 (&dev->intf_state_mutex){+.+.}-{3:3}, at: mlx5_init_one+0x2e/0x490 [mlx5_core] but task is already holding lock: ffff888101aa7898 (&(¬ifier->n_head)->rwsem){++++}-{3:3}, at: blocking_notifier_call_chain+0x5a/0x130 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&(¬ifier->n_head)->rwsem){++++}-{3:3}: down_write+0x90/0x150 blocking_notifier_chain_register+0x53/0xa0 mlx5_sf_table_init+0x369/0x4a0 [mlx5_core] mlx5_init_one+0x261/0x490 [mlx5_core] probe_one+0x430/0x680 [mlx5_core] local_pci_probe+0xd6/0x170 work_for_cpu_fn+0x4e/0xa0 process_one_work+0x7c2/0x1340 worker_thread+0x6f6/0xec0 kthread+0x28f/0x330 ret_from_fork+0x1f/0x30 -> #0 (&dev->intf_state_mutex){+.+.}-{3:3}: __lock_acquire+0x2fc7/0x6720 lock_acquire+0x1c1/0x550 __mutex_lock+0x12c/0x14b0 mlx5_init_one+0x2e/0x490 [mlx5_core] mlx5_sf_dev_probe+0x29c/0x370 [mlx5_core] auxiliary_bus_probe+0x9d/0xe0 really_probe+0x1e0/0xaa0 __driver_probe_device+0x219/0x480 driver_probe_device+0x49/0x130 __device_attach_driver+0x1b8/0x280 bus_for_each_drv+0x123/0x1a0 __device_attach+0x1a3/0x460 bus_probe_device+0x1a2/0x260 device_add+0x9b1/0x1b40 __auxiliary_device_add+0x88/0xc0 mlx5_sf_dev_state_change_handler+0x67e/0x9d0 [mlx5_core] blocking_notifier_call_chain+0xd5/0x130 mlx5_vhca_state_work_handler+0x2b0/0x3f0 [mlx5_core] process_one_work+0x7c2/0x1340 worker_thread+0x59d/0xec0 kthread+0x28f/0x330 ret_from_fork+0x1f/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&(¬ifier->n_head)->rwsem); lock(&dev->intf_state_mutex); lock(&(¬ifier->n_head)->rwsem); lock(&dev->intf_state_mutex); *** DEADLOCK *** 4 locks held by kworker/u20:0/8: #0: ffff888150612938 ((wq_completion)mlx5_events){+.+.}-{0:0}, at: process_one_work+0x6e2/0x1340 #1: ffff888100cafdb8 ((work_completion)(&work->work)#3){+.+.}-{0:0}, at: process_one_work+0x70f/0x1340 #2: ffff888101aa7898 (&(¬ifier->n_head)->rwsem){++++}-{3:3}, at: blocking_notifier_call_chain+0x5a/0x130 #3: ffff88813682d0e8 (&dev->mutex){....}-{3:3}, at:__device_attach+0x76/0x460 stack backtrace: CPU: 6 PID: 8 Comm: kworker/u20:0 Not tainted 5.19.0-rc8+ Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_events mlx5_vhca_state_work_handler [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x57/0x7d check_noncircular+0x278/0x300 ? print_circular_bug+0x460/0x460 ? lock_chain_count+0x20/0x20 ? register_lock_class+0x1880/0x1880 __lock_acquire+0x2fc7/0x6720 ? register_lock_class+0x1880/0x1880 ? register_lock_class+0x1880/0x1880 lock_acquire+0x1c1/0x550 ? mlx5_init_one+0x2e/0x490 [mlx5_core] ? lockdep_hardirqs_on_prepare+0x400/0x400 __mutex_lock+0x12c/0x14b0 ? mlx5_init_one+0x2e/0x490 [mlx5_core] ? mlx5_init_one+0x2e/0x490 [mlx5_core] ? _raw_read_unlock+0x1f/0x30 ? mutex_lock_io_nested+0x1320/0x1320 ? __ioremap_caller.constprop.0+0x306/0x490 ? mlx5_sf_dev_probe+0x269/0x370 [mlx5_core] ? iounmap+0x160/0x160 mlx5_init_one+0x2e/0x490 [mlx5_core] mlx5_sf_dev_probe+0x29c/0x370 [mlx5_core] ? mlx5_sf_dev_remove+0x130/0x130 [mlx5_core] auxiliary_bus_probe+0x9d/0xe0 really_probe+0x1e0/0xaa0 __driver_probe_device+0x219/0x480 ? auxiliary_match_id+0xe9/0x140 driver_probe_device+0x49/0x130 __device_attach_driver+0x1b8/0x280 ? driver_allows_async_probing+0x140/0x140 bus_for_each_drv+0x123/0x1a0 ? bus_for_each_dev+0x1a0/0x1a0 ? lockdep_hardirqs_on_prepare+0x286/0x400 ? trace_hardirqs_on+0x2d/0x100 __device_attach+0x1a3/0x460 ? device_driver_attach+0x1e0/0x1e0 ? kobject_uevent_env+0x22d/0xf10 bus_probe_device+0x1a2/0x260 device_add+0x9b1/0x1b40 ? dev_set_name+0xab/0xe0 ? __fw_devlink_link_to_suppliers+0x260/0x260 ? memset+0x20/0x40 ? lockdep_init_map_type+0x21a/0x7d0 __auxiliary_device_add+0x88/0xc0 ? auxiliary_device_init+0x86/0xa0 mlx5_sf_dev_state_change_handler+0x67e/0x9d0 [mlx5_core] blocking_notifier_call_chain+0xd5/0x130 mlx5_vhca_state_work_handler+0x2b0/0x3f0 [mlx5_core] ? mlx5_vhca_event_arm+0x100/0x100 [mlx5_core] ? lock_downgrade+0x6e0/0x6e0 ? lockdep_hardirqs_on_prepare+0x286/0x400 process_one_work+0x7c2/0x1340 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? pwq_dec_nr_in_flight+0x230/0x230 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x59d/0xec0 ? process_one_work+0x1340/0x1340 kthread+0x28f/0x330 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Fixes: 6a32732 ("net/mlx5: SF, Port function state change support") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Wenzel
pushed a commit
that referenced
this pull request
Jan 17, 2023
To clear the flow table on flow table free, the following sequence normally happens in order: 1) gc_step work is stopped to disable any further stats/del requests. 2) All flow table entries are set to teardown state. 3) Run gc_step which will queue HW del work for each flow table entry. 4) Waiting for the above del work to finish (flush). 5) Run gc_step again, deleting all entries from the flow table. 6) Flow table is freed. But if a flow table entry already has pending HW stats or HW add work step 3 will not queue HW del work (it will be skipped), step 4 will wait for the pending add/stats to finish, and step 5 will queue HW del work which might execute after freeing of the flow table. To fix the above, this patch flushes the pending work, then it sets the teardown flag to all flows in the flowtable and it forces a garbage collector run to queue work to remove the flows from hardware, then it flushes this new pending work and (finally) it forces another garbage collector run to remove the entry from the software flowtable. Stack trace: [47773.882335] BUG: KASAN: use-after-free in down_read+0x99/0x460 [47773.883634] Write of size 8 at addr ffff888103b45aa8 by task kworker/u20:6/543704 [47773.885634] CPU: 3 PID: 543704 Comm: kworker/u20:6 Not tainted 5.12.0-rc7+ #2 [47773.886745] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009) [47773.888438] Workqueue: nf_ft_offload_del flow_offload_work_handler [nf_flow_table] [47773.889727] Call Trace: [47773.890214] dump_stack+0xbb/0x107 [47773.890818] print_address_description.constprop.0+0x18/0x140 [47773.892990] kasan_report.cold+0x7c/0xd8 [47773.894459] kasan_check_range+0x145/0x1a0 [47773.895174] down_read+0x99/0x460 [47773.899706] nf_flow_offload_tuple+0x24f/0x3c0 [nf_flow_table] [47773.907137] flow_offload_work_handler+0x72d/0xbe0 [nf_flow_table] [47773.913372] process_one_work+0x8ac/0x14e0 [47773.921325] [47773.921325] Allocated by task 592159: [47773.922031] kasan_save_stack+0x1b/0x40 [47773.922730] __kasan_kmalloc+0x7a/0x90 [47773.923411] tcf_ct_flow_table_get+0x3cb/0x1230 [act_ct] [47773.924363] tcf_ct_init+0x71c/0x1156 [act_ct] [47773.925207] tcf_action_init_1+0x45b/0x700 [47773.925987] tcf_action_init+0x453/0x6b0 [47773.926692] tcf_exts_validate+0x3d0/0x600 [47773.927419] fl_change+0x757/0x4a51 [cls_flower] [47773.928227] tc_new_tfilter+0x89a/0x2070 [47773.936652] [47773.936652] Freed by task 543704: [47773.937303] kasan_save_stack+0x1b/0x40 [47773.938039] kasan_set_track+0x1c/0x30 [47773.938731] kasan_set_free_info+0x20/0x30 [47773.939467] __kasan_slab_free+0xe7/0x120 [47773.940194] slab_free_freelist_hook+0x86/0x190 [47773.941038] kfree+0xce/0x3a0 [47773.941644] tcf_ct_flow_table_cleanup_work Original patch description and stack trace by Paul Blakey. Fixes: c29f74e ("netfilter: nf_flow_table: hardware offload support") Reported-by: Paul Blakey <paulb@nvidia.com> Tested-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Wenzel
pushed a commit
that referenced
this pull request
Jan 17, 2023
Yu Zhao reported a bug after the commit "mm/swap: Add swp_offset_pfn() to fetch PFN from swap entry" added a check in swp_offset_pfn() for swap type [1]: kernel BUG at include/linux/swapops.h:117! CPU: 46 PID: 5245 Comm: EventManager_De Tainted: G S O L 6.0.0-dbg-DEV #2 RIP: 0010:pfn_swap_entry_to_page+0x72/0xf0 Code: c6 48 8b 36 48 83 fe ff 74 53 48 01 d1 48 83 c1 08 48 8b 09 f6 c1 01 75 7b 66 90 48 89 c1 48 8b 09 f6 c1 01 74 74 5d c3 eb 9e <0f> 0b 48 ba ff ff ff ff 03 00 00 00 eb ae a9 ff 0f 00 00 75 13 48 RSP: 0018:ffffa59e73fabb80 EFLAGS: 00010282 RAX: 00000000ffffffe8 RBX: 0c00000000000000 RCX: ffffcd5440000000 RDX: 1ffffffffff7a80a RSI: 0000000000000000 RDI: 0c0000000000042b RBP: ffffa59e73fabb80 R08: ffff9965ca6e8bb8 R09: 0000000000000000 R10: ffffffffa5a2f62d R11: 0000030b372e9fff R12: ffff997b79db5738 R13: 000000000000042b R14: 0c0000000000042b R15: 1ffffffffff7a80a FS: 00007f549d1bb700(0000) GS:ffff99d3cf680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000440d035b3180 CR3: 0000002243176004 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> change_pte_range+0x36e/0x880 change_p4d_range+0x2e8/0x670 change_protection_range+0x14e/0x2c0 mprotect_fixup+0x1ee/0x330 do_mprotect_pkey+0x34c/0x440 __x64_sys_mprotect+0x1d/0x30 It triggers because pfn_swap_entry_to_page() could be called upon e.g. a genuine swap entry. Fix it by only calling it when it's a write migration entry where the page* is used. [1] https://lore.kernel.org/lkml/CAOUHufaVC2Za-p8m0aiHw6YkheDcrO-C3wRGixwDS32VTS+k1w@mail.gmail.com/ Link: https://lkml.kernel.org/r/20220823221138.45602-1-peterx@redhat.com Fixes: 6c28760 ("mm: remember exclusively mapped anonymous pages with PG_anon_exclusive") Signed-off-by: Peter Xu <peterx@redhat.com> Reported-by: Yu Zhao <yuzhao@google.com> Tested-by: Yu Zhao <yuzhao@google.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Wenzel
pushed a commit
that referenced
this pull request
Jan 17, 2023
Syzkaller reports the following problem:
BUG: sleeping function called from invalid context at kernel/printk/printk.c:2347
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 1105, name: syz-executor423
3 locks held by syz-executor423/1105:
#0: ffff8881468b9098 (&tty->ldisc_sem){++++}-{0:0}, at: tty_ldisc_ref_wait+0x22/0x90 drivers/tty/tty_ldisc.c:266
#1: ffff8881468b9130 (&tty->atomic_write_lock){+.+.}-{3:3}, at: tty_write_lock drivers/tty/tty_io.c:952 [inline]
#1: ffff8881468b9130 (&tty->atomic_write_lock){+.+.}-{3:3}, at: do_tty_write drivers/tty/tty_io.c:975 [inline]
#1: ffff8881468b9130 (&tty->atomic_write_lock){+.+.}-{3:3}, at: file_tty_write.constprop.0+0x2a8/0x8e0 drivers/tty/tty_io.c:1118
#2: ffff88801b06c398 (&gsm->tx_lock){....}-{2:2}, at: gsmld_write+0x5e/0x150 drivers/tty/n_gsm.c:2717
irq event stamp: 3482
hardirqs last enabled at (3481): [<ffffffff81d13343>] __get_reqs_available+0x143/0x2f0 fs/aio.c:946
hardirqs last disabled at (3482): [<ffffffff87d39722>] __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline]
hardirqs last disabled at (3482): [<ffffffff87d39722>] _raw_spin_lock_irqsave+0x52/0x60 kernel/locking/spinlock.c:159
softirqs last enabled at (3408): [<ffffffff87e01002>] asm_call_irq_on_stack+0x12/0x20
softirqs last disabled at (3401): [<ffffffff87e01002>] asm_call_irq_on_stack+0x12/0x20
Preemption disabled at:
[<0000000000000000>] 0x0
CPU: 2 PID: 1105 Comm: syz-executor423 Not tainted 5.10.137-syzkaller #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x107/0x167 lib/dump_stack.c:118
___might_sleep.cold+0x1e8/0x22e kernel/sched/core.c:7304
console_lock+0x19/0x80 kernel/printk/printk.c:2347
do_con_write+0x113/0x1de0 drivers/tty/vt/vt.c:2909
con_write+0x22/0xc0 drivers/tty/vt/vt.c:3296
gsmld_write+0xd0/0x150 drivers/tty/n_gsm.c:2720
do_tty_write drivers/tty/tty_io.c:1028 [inline]
file_tty_write.constprop.0+0x502/0x8e0 drivers/tty/tty_io.c:1118
call_write_iter include/linux/fs.h:1903 [inline]
aio_write+0x355/0x7b0 fs/aio.c:1580
__io_submit_one fs/aio.c:1952 [inline]
io_submit_one+0xf45/0x1a90 fs/aio.c:1999
__do_sys_io_submit fs/aio.c:2058 [inline]
__se_sys_io_submit fs/aio.c:2028 [inline]
__x64_sys_io_submit+0x18c/0x2f0 fs/aio.c:2028
do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x61/0xc6
The problem happens in the following control flow:
gsmld_write(...)
spin_lock_irqsave(&gsm->tx_lock, flags) // taken a spinlock on TX data
con_write(...)
do_con_write(...)
console_lock()
might_sleep() // -> bug
As far as console_lock() might sleep it should not be called with
spinlock held.
The patch replaces tx_lock spinlock with mutex in order to avoid the
problem.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 32dd59f ("tty: n_gsm: fix race condition in gsmld_write()")
Cc: stable <stable@kernel.org>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Link: https://lore.kernel.org/r/20220829131640.69254-3-pchelkin@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wenzel
pushed a commit
that referenced
this pull request
Jan 17, 2023
A recent commit expanding the scope of the udc_lock mutex in the
gadget core managed to cause an obscure and slightly bizarre lockdep
violation. In abbreviated form:
======================================================
WARNING: possible circular locking dependency detected
5.19.0-rc7+ #12510 Not tainted
------------------------------------------------------
udevadm/312 is trying to acquire lock:
ffff80000aae1058 (udc_lock){+.+.}-{3:3}, at: usb_udc_uevent+0x54/0xe0
but task is already holding lock:
ffff000002277548 (kn->active#4){++++}-{0:0}, at: kernfs_seq_start+0x34/0xe0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (kn->active#4){++++}-{0:0}:
lock_acquire+0x68/0x84
__kernfs_remove+0x268/0x380
kernfs_remove_by_name_ns+0x58/0xac
sysfs_remove_file_ns+0x18/0x24
device_del+0x15c/0x440
-> #2 (device_links_lock){+.+.}-{3:3}:
lock_acquire+0x68/0x84
__mutex_lock+0x9c/0x430
mutex_lock_nested+0x38/0x64
device_link_remove+0x3c/0xa0
_regulator_put.part.0+0x168/0x190
regulator_put+0x3c/0x54
devm_regulator_release+0x14/0x20
-> #1 (regulator_list_mutex){+.+.}-{3:3}:
lock_acquire+0x68/0x84
__mutex_lock+0x9c/0x430
mutex_lock_nested+0x38/0x64
regulator_lock_dependent+0x54/0x284
regulator_enable+0x34/0x80
phy_power_on+0x24/0x130
__dwc2_lowlevel_hw_enable+0x100/0x130
dwc2_lowlevel_hw_enable+0x18/0x40
dwc2_hsotg_udc_start+0x6c/0x2f0
gadget_bind_driver+0x124/0x1f4
-> #0 (udc_lock){+.+.}-{3:3}:
__lock_acquire+0x1298/0x20cc
lock_acquire.part.0+0xe0/0x230
lock_acquire+0x68/0x84
__mutex_lock+0x9c/0x430
mutex_lock_nested+0x38/0x64
usb_udc_uevent+0x54/0xe0
Evidently this was caused by the scope of udc_mutex being too large.
The mutex is only meant to protect udc->driver along with a few other
things. As far as I can tell, there's no reason for the mutex to be
held while the gadget core calls a gadget driver's ->bind or ->unbind
routine, or while a UDC is being started or stopped. (This accounts
for link #1 in the chain above, where the mutex is held while the
dwc2_hsotg_udc is started as part of driver probing.)
Gadget drivers' ->disconnect callbacks are problematic. Even though
usb_gadget_disconnect() will now acquire the udc_mutex, there's a
window in usb_gadget_bind_driver() between the times when the mutex is
released and the ->bind callback is invoked. If a disconnect occurred
during that window, we could call the driver's ->disconnect routine
before its ->bind routine. To prevent this from happening, it will be
necessary to prevent a UDC from connecting while it has no gadget
driver. This should be done already but it doesn't seem to be;
currently usb_gadget_connect() has no check for this. Such a check
will have to be added later.
Some degree of mutual exclusion is required in soft_connect_store(),
which can dereference udc->driver at arbitrary times since it is a
sysfs callback. The solution here is to acquire the gadget's device
lock rather than the udc_mutex. Since the driver core guarantees that
the device lock is always held during driver binding and unbinding,
this will make the accesses in soft_connect_store() mutually exclusive
with any changes to udc->driver.
Lastly, it turns out there is one place which should hold the
udc_mutex but currently does not: The function_show() routine needs
protection while it dereferences udc->driver. The missing lock and
unlock calls are added.
Link: https://lore.kernel.org/all/b2ba4245-9917-e399-94c8-03a383e7070e@samsung.com/
Fixes: 2191c00 ("USB: gadget: Fix use-after-free Read in usb_udc_uevent()")
Cc: Felipe Balbi <balbi@kernel.org>
Cc: stable@vger.kernel.org
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YwkfhdxA/I2nOcK7@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wenzel
pushed a commit
that referenced
this pull request
Jan 17, 2023
Because rxrpc pretends to be a tunnel on top of a UDP/UDP6 socket, allowing it to siphon off UDP packets early in the handling of received UDP packets thereby avoiding the packet going through the UDP receive queue, it doesn't get ICMP packets through the UDP ->sk_error_report() callback. In fact, it doesn't appear that there's any usable option for getting hold of ICMP packets. Fix this by adding a new UDP encap hook to distribute error messages for UDP tunnels. If the hook is set, then the tunnel driver will be able to see ICMP packets. The hook provides the offset into the packet of the UDP header of the original packet that caused the notification. An alternative would be to call the ->error_handler() hook - but that requires that the skbuff be cloned (as ip_icmp_error() or ipv6_cmp_error() do, though isn't really necessary or desirable in rxrpc's case is we want to parse them there and then, not queue them). Changes ======= ver #3) - Fixed an uninitialised variable. ver #2) - Fixed some missing CONFIG_AF_RXRPC_IPV6 conditionals. Fixes: 5271953 ("rxrpc: Use the UDP encap_rcv hook") Signed-off-by: David Howells <dhowells@redhat.com>
Wenzel
pushed a commit
that referenced
this pull request
Jan 17, 2023
The driver incorrectly frees client instance and subsequent i40e module removal leads to kernel crash. Reproducer: 1. Do ethtool offline test followed immediately by another one host# ethtool -t eth0 offline; ethtool -t eth0 offline 2. Remove recursively irdma module that also removes i40e module host# modprobe -r irdma Result: [ 8675.035651] i40e 0000:3d:00.0 eno1: offline testing starting [ 8675.193774] i40e 0000:3d:00.0 eno1: testing finished [ 8675.201316] i40e 0000:3d:00.0 eno1: offline testing starting [ 8675.358921] i40e 0000:3d:00.0 eno1: testing finished [ 8675.496921] i40e 0000:3d:00.0: IRDMA hardware initialization FAILED init_state=2 status=-110 [ 8686.188955] i40e 0000:3d:00.1: i40e_ptp_stop: removed PHC on eno2 [ 8686.943890] i40e 0000:3d:00.1: Deleted LAN device PF1 bus=0x3d dev=0x00 func=0x01 [ 8686.952669] i40e 0000:3d:00.0: i40e_ptp_stop: removed PHC on eno1 [ 8687.761787] BUG: kernel NULL pointer dereference, address: 0000000000000030 [ 8687.768755] #PF: supervisor read access in kernel mode [ 8687.773895] #PF: error_code(0x0000) - not-present page [ 8687.779034] PGD 0 P4D 0 [ 8687.781575] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 8687.785935] CPU: 51 PID: 172891 Comm: rmmod Kdump: loaded Tainted: G W I 5.19.0+ #2 [ 8687.794800] Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.0X.02.0001.051420190324 05/14/2019 [ 8687.805222] RIP: 0010:i40e_lan_del_device+0x13/0xb0 [i40e] [ 8687.810719] Code: d4 84 c0 0f 84 b8 25 01 00 e9 9c 25 01 00 41 bc f4 ff ff ff eb 91 90 0f 1f 44 00 00 41 54 55 53 48 8b 87 58 08 00 00 48 89 fb <48> 8b 68 30 48 89 ef e8 21 8a 0f d5 48 89 ef e8 a9 78 0f d5 48 8b [ 8687.829462] RSP: 0018:ffffa604072efce0 EFLAGS: 00010202 [ 8687.834689] RAX: 0000000000000000 RBX: ffff8f43833b2000 RCX: 0000000000000000 [ 8687.841821] RDX: 0000000000000000 RSI: ffff8f4b0545b298 RDI: ffff8f43833b2000 [ 8687.848955] RBP: ffff8f43833b2000 R08: 0000000000000001 R09: 0000000000000000 [ 8687.856086] R10: 0000000000000000 R11: 000ffffffffff000 R12: ffff8f43833b2ef0 [ 8687.863218] R13: ffff8f43833b2ef0 R14: ffff915103966000 R15: ffff8f43833b2008 [ 8687.870342] FS: 00007f79501c3740(0000) GS:ffff8f4adffc0000(0000) knlGS:0000000000000000 [ 8687.878427] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8687.884174] CR2: 0000000000000030 CR3: 000000014276e004 CR4: 00000000007706e0 [ 8687.891306] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8687.898441] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8687.905572] PKRU: 55555554 [ 8687.908286] Call Trace: [ 8687.910737] <TASK> [ 8687.912843] i40e_remove+0x2c0/0x330 [i40e] [ 8687.917040] pci_device_remove+0x33/0xa0 [ 8687.920962] device_release_driver_internal+0x1aa/0x230 [ 8687.926188] driver_detach+0x44/0x90 [ 8687.929770] bus_remove_driver+0x55/0xe0 [ 8687.933693] pci_unregister_driver+0x2a/0xb0 [ 8687.937967] i40e_exit_module+0xc/0xf48 [i40e] Two offline tests cause IRDMA driver failure (ETIMEDOUT) and this failure is indicated back to i40e_client_subtask() that calls i40e_client_del_instance() to free client instance referenced by pf->cinst and sets this pointer to NULL. During the module removal i40e_remove() calls i40e_lan_del_device() that dereferences pf->cinst that is NULL -> crash. Do not remove client instance when client open callbacks fails and just clear __I40E_CLIENT_INSTANCE_OPENED bit. The driver also needs to take care about this situation (when netdev is up and client is NOT opened) in i40e_notify_client_of_netdev_close() and calls client close callback only when __I40E_CLIENT_INSTANCE_OPENED is set. Fixes: 0ef2d5a ("i40e: KISS the client interface") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Helena Anna Dubel <helena.anna.dubel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Wenzel
pushed a commit
that referenced
this pull request
Jan 17, 2023
The SRv6 layer allows defining HMAC data that can later be used to sign IPv6 Segment Routing Headers. This configuration is realised via netlink through four attributes: SEG6_ATTR_HMACKEYID, SEG6_ATTR_SECRET, SEG6_ATTR_SECRETLEN and SEG6_ATTR_ALGID. Because the SECRETLEN attribute is decoupled from the actual length of the SECRET attribute, it is possible to provide invalid combinations (e.g., secret = "", secretlen = 64). This case is not checked in the code and with an appropriately crafted netlink message, an out-of-bounds read of up to 64 bytes (max secret length) can occur past the skb end pointer and into skb_shared_info: Breakpoint 1, seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208 208 memcpy(hinfo->secret, secret, slen); (gdb) bt #0 seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208 #1 0xffffffff81e012e9 in genl_family_rcv_msg_doit (skb=skb@entry=0xffff88800b1f9f00, nlh=nlh@entry=0xffff88800b1b7600, extack=extack@entry=0xffffc90000ba7af0, ops=ops@entry=0xffffc90000ba7a80, hdrlen=4, net=0xffffffff84237580 <init_net>, family=<optimized out>, family=<optimized out>) at net/netlink/genetlink.c:731 #2 0xffffffff81e01435 in genl_family_rcv_msg (extack=0xffffc90000ba7af0, nlh=0xffff88800b1b7600, skb=0xffff88800b1f9f00, family=0xffffffff82fef6c0 <seg6_genl_family>) at net/netlink/genetlink.c:775 #3 genl_rcv_msg (skb=0xffff88800b1f9f00, nlh=0xffff88800b1b7600, extack=0xffffc90000ba7af0) at net/netlink/genetlink.c:792 #4 0xffffffff81dfffc3 in netlink_rcv_skb (skb=skb@entry=0xffff88800b1f9f00, cb=cb@entry=0xffffffff81e01350 <genl_rcv_msg>) at net/netlink/af_netlink.c:2501 #5 0xffffffff81e00919 in genl_rcv (skb=0xffff88800b1f9f00) at net/netlink/genetlink.c:803 #6 0xffffffff81dff6ae in netlink_unicast_kernel (ssk=0xffff888010eec800, skb=0xffff88800b1f9f00, sk=0xffff888004aed000) at net/netlink/af_netlink.c:1319 #7 netlink_unicast (ssk=ssk@entry=0xffff888010eec800, skb=skb@entry=0xffff88800b1f9f00, portid=portid@entry=0, nonblock=<optimized out>) at net/netlink/af_netlink.c:1345 #8 0xffffffff81dff9a4 in netlink_sendmsg (sock=<optimized out>, msg=0xffffc90000ba7e48, len=<optimized out>) at net/netlink/af_netlink.c:1921 ... (gdb) p/x ((struct sk_buff *)0xffff88800b1f9f00)->head + ((struct sk_buff *)0xffff88800b1f9f00)->end $1 = 0xffff88800b1b76c0 (gdb) p/x secret $2 = 0xffff88800b1b76c0 (gdb) p slen $3 = 64 '@' The OOB data can then be read back from userspace by dumping HMAC state. This commit fixes this by ensuring SECRETLEN cannot exceed the actual length of SECRET. Reported-by: Lucas Leong <wmliang.tw@gmail.com> Tested: verified that EINVAL is correctly returned when secretlen > len(secret) Fixes: 4f4853d ("ipv6: sr: implement API to control SR HMAC structure") Signed-off-by: David Lebrun <dlebrun@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Wenzel
pushed a commit
that referenced
this pull request
Jan 17, 2023
In the IDC callback that is accessed when the aux drivers request a reset, the function to unplug the aux devices is called. This function is also called in the ice_prepare_for_reset function. This double call is causing a "scheduling while atomic" BUG. [ 662.676430] ice 0000:4c:00.0 rocep76s0: cqp opcode = 0x1 maj_err_code = 0xffff min_err_code = 0x8003 [ 662.676609] ice 0000:4c:00.0 rocep76s0: [Modify QP Cmd Error][op_code=8] status=-29 waiting=1 completion_err=1 maj=0xffff min=0x8003 [ 662.815006] ice 0000:4c:00.0 rocep76s0: ICE OICR event notification: oicr = 0x10000003 [ 662.815014] ice 0000:4c:00.0 rocep76s0: critical PE Error, GLPE_CRITERR=0x00011424 [ 662.815017] ice 0000:4c:00.0 rocep76s0: Requesting a reset [ 662.815475] BUG: scheduling while atomic: swapper/37/0/0x00010002 [ 662.815475] BUG: scheduling while atomic: swapper/37/0/0x00010002 [ 662.815477] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs rfkill 8021q garp mrp stp llc vfat fat rpcrdma intel_rapl_msr intel_rapl_common sunrpc i10nm_edac rdma_ucm nfit ib_srpt libnvdimm ib_isert iscsi_target_mod x86_pkg_temp_thermal intel_powerclamp coretemp target_core_mod snd_hda_intel ib_iser snd_intel_dspcfg libiscsi snd_intel_sdw_acpi scsi_transport_iscsi kvm_intel iTCO_wdt rdma_cm snd_hda_codec kvm iw_cm ipmi_ssif iTCO_vendor_support snd_hda_core irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hwdep snd_seq snd_seq_device rapl snd_pcm snd_timer isst_if_mbox_pci pcspkr isst_if_mmio irdma intel_uncore idxd acpi_ipmi joydev isst_if_common snd mei_me idxd_bus ipmi_si soundcore i2c_i801 mei ipmi_devintf i2c_smbus i2c_ismt ipmi_msghandler acpi_power_meter acpi_pad rv(OE) ib_uverbs ib_cm ib_core xfs libcrc32c ast i2c_algo_bit drm_vram_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm_ttm_helpe r ttm [ 662.815546] nvme nvme_core ice drm crc32c_intel i40e t10_pi wmi pinctrl_emmitsburg dm_mirror dm_region_hash dm_log dm_mod fuse [ 662.815557] Preemption disabled at: [ 662.815558] [<0000000000000000>] 0x0 [ 662.815563] CPU: 37 PID: 0 Comm: swapper/37 Kdump: loaded Tainted: G S OE 5.17.1 #2 [ 662.815566] Hardware name: Intel Corporation D50DNP/D50DNP, BIOS SE5C6301.86B.6624.D18.2111021741 11/02/2021 [ 662.815568] Call Trace: [ 662.815572] <IRQ> [ 662.815574] dump_stack_lvl+0x33/0x42 [ 662.815581] __schedule_bug.cold.147+0x7d/0x8a [ 662.815588] __schedule+0x798/0x990 [ 662.815595] schedule+0x44/0xc0 [ 662.815597] schedule_preempt_disabled+0x14/0x20 [ 662.815600] __mutex_lock.isra.11+0x46c/0x490 [ 662.815603] ? __ibdev_printk+0x76/0xc0 [ib_core] [ 662.815633] device_del+0x37/0x3d0 [ 662.815639] ice_unplug_aux_dev+0x1a/0x40 [ice] [ 662.815674] ice_schedule_reset+0x3c/0xd0 [ice] [ 662.815693] irdma_iidc_event_handler.cold.7+0xb6/0xd3 [irdma] [ 662.815712] ? bitmap_find_next_zero_area_off+0x45/0xa0 [ 662.815719] ice_send_event_to_aux+0x54/0x70 [ice] [ 662.815741] ice_misc_intr+0x21d/0x2d0 [ice] [ 662.815756] __handle_irq_event_percpu+0x4c/0x180 [ 662.815762] handle_irq_event_percpu+0xf/0x40 [ 662.815764] handle_irq_event+0x34/0x60 [ 662.815766] handle_edge_irq+0x9a/0x1c0 [ 662.815770] __common_interrupt+0x62/0x100 [ 662.815774] common_interrupt+0xb4/0xd0 [ 662.815779] </IRQ> [ 662.815780] <TASK> [ 662.815780] asm_common_interrupt+0x1e/0x40 [ 662.815785] RIP: 0010:cpuidle_enter_state+0xd6/0x380 [ 662.815789] Code: 49 89 c4 0f 1f 44 00 00 31 ff e8 65 d7 95 ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 64 02 00 00 31 ff e8 ae c5 9c ff fb 45 85 f6 <0f> 88 12 01 00 00 49 63 d6 4c 2b 24 24 48 8d 04 52 48 8d 04 82 49 [ 662.815791] RSP: 0018:ff2c2c4f18edbe80 EFLAGS: 00000202 [ 662.815793] RAX: ff280805df140000 RBX: 0000000000000002 RCX: 000000000000001f [ 662.815795] RDX: 0000009a52da2d08 RSI: ffffffff93f8240b RDI: ffffffff93f53ee7 [ 662.815796] RBP: ff5e2bd11ff41928 R08: 0000000000000000 R09: 000000000002f8c0 [ 662.815797] R10: 0000010c3f18e2cf R11: 000000000000000f R12: 0000009a52da2d08 [ 662.815798] R13: ffffffff94ad7e20 R14: 0000000000000002 R15: 0000000000000000 [ 662.815801] cpuidle_enter+0x29/0x40 [ 662.815803] do_idle+0x261/0x2b0 [ 662.815807] cpu_startup_entry+0x19/0x20 [ 662.815809] start_secondary+0x114/0x150 [ 662.815813] secondary_startup_64_no_verify+0xd5/0xdb [ 662.815818] </TASK> [ 662.815846] bad: scheduling from the idle thread! [ 662.815849] CPU: 37 PID: 0 Comm: swapper/37 Kdump: loaded Tainted: G S W OE 5.17.1 #2 [ 662.815852] Hardware name: Intel Corporation D50DNP/D50DNP, BIOS SE5C6301.86B.6624.D18.2111021741 11/02/2021 [ 662.815853] Call Trace: [ 662.815855] <IRQ> [ 662.815856] dump_stack_lvl+0x33/0x42 [ 662.815860] dequeue_task_idle+0x20/0x30 [ 662.815863] __schedule+0x1c3/0x990 [ 662.815868] schedule+0x44/0xc0 [ 662.815871] schedule_preempt_disabled+0x14/0x20 [ 662.815873] __mutex_lock.isra.11+0x3a8/0x490 [ 662.815876] ? __ibdev_printk+0x76/0xc0 [ib_core] [ 662.815904] device_del+0x37/0x3d0 [ 662.815909] ice_unplug_aux_dev+0x1a/0x40 [ice] [ 662.815937] ice_schedule_reset+0x3c/0xd0 [ice] [ 662.815961] irdma_iidc_event_handler.cold.7+0xb6/0xd3 [irdma] [ 662.815979] ? bitmap_find_next_zero_area_off+0x45/0xa0 [ 662.815985] ice_send_event_to_aux+0x54/0x70 [ice] [ 662.816011] ice_misc_intr+0x21d/0x2d0 [ice] [ 662.816033] __handle_irq_event_percpu+0x4c/0x180 [ 662.816037] handle_irq_event_percpu+0xf/0x40 [ 662.816039] handle_irq_event+0x34/0x60 [ 662.816042] handle_edge_irq+0x9a/0x1c0 [ 662.816045] __common_interrupt+0x62/0x100 [ 662.816048] common_interrupt+0xb4/0xd0 [ 662.816052] </IRQ> [ 662.816053] <TASK> [ 662.816054] asm_common_interrupt+0x1e/0x40 [ 662.816057] RIP: 0010:cpuidle_enter_state+0xd6/0x380 [ 662.816060] Code: 49 89 c4 0f 1f 44 00 00 31 ff e8 65 d7 95 ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 64 02 00 00 31 ff e8 ae c5 9c ff fb 45 85 f6 <0f> 88 12 01 00 00 49 63 d6 4c 2b 24 24 48 8d 04 52 48 8d 04 82 49 [ 662.816063] RSP: 0018:ff2c2c4f18edbe80 EFLAGS: 00000202 [ 662.816065] RAX: ff280805df140000 RBX: 0000000000000002 RCX: 000000000000001f [ 662.816067] RDX: 0000009a52da2d08 RSI: ffffffff93f8240b RDI: ffffffff93f53ee7 [ 662.816068] RBP: ff5e2bd11ff41928 R08: 0000000000000000 R09: 000000000002f8c0 [ 662.816070] R10: 0000010c3f18e2cf R11: 000000000000000f R12: 0000009a52da2d08 [ 662.816071] R13: ffffffff94ad7e20 R14: 0000000000000002 R15: 0000000000000000 [ 662.816075] cpuidle_enter+0x29/0x40 [ 662.816077] do_idle+0x261/0x2b0 [ 662.816080] cpu_startup_entry+0x19/0x20 [ 662.816083] start_secondary+0x114/0x150 [ 662.816087] secondary_startup_64_no_verify+0xd5/0xdb [ 662.816091] </TASK> [ 662.816169] bad: scheduling from the idle thread! The correct place to unplug the aux devices for a reset is in the prepare_for_reset function, as this is a common place for all reset flows. It also has built in protection from being called twice in a single reset instance before the aux devices are replugged. Fixes: f9f5301 ("ice: Register auxiliary device to provide RDMA") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Helena Anna Dubel <helena.anna.dubel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Wenzel
pushed a commit
that referenced
this pull request
Jan 17, 2023
…kernel/git/at91/linux into arm/fixes AT91 fixes for 6.0 #2 It contains a fix for LAN966 SoCs that corrects the interrupt number for internal PHYs. * tag 'at91-fixes-6.0-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: lan966x: Fix the interrupt number for internal PHYs Link: https://lore.kernel.org/r/20220915105833.4159850-1-claudiu.beznea@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Wenzel
pushed a commit
that referenced
this pull request
Jan 17, 2023
…itical-section'
Ido Schimmel says:
====================
ipmr: Always call ip{,6}_mr_forward() from RCU read-side critical section
Patch #1 fixes a bug in ipmr code.
Patch #2 adds corresponding test cases.
====================
Link: https://lore.kernel.org/r/20220914075339.4074096-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wenzel
pushed a commit
that referenced
this pull request
Jan 17, 2023
…kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.0, take #2 - Fix kmemleak usage in Protected KVM (again)
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
KASAN threw an error on accessing user pointers when fuzzing. This patch
now distinguishes between kernel pointers and user pointers to avoid
false positive KASAN triggers.
Opened this pull request against 5.15-3 branch, let me know if this should be in the 5.15-4 branch