Releases: Infineon/mtb-pdl-cat2
mtb-pdl-cat2 peripheral driver library v2.15.0
See the README.md and the
PDL API reference manual
for a complete description of the Peripheral driver library.
What's included?
New Features
- Support of new MPNs with inductive sensing method only.
Updated personalities
- MSCLP: Added multi-pin support - assign several pins to a single CAPSENSE™ sensor.
Updated drivers
Known Issues
- PDL flash write APIs are not supported when using ARM C6 Compiler in debug mode. Please use ARM C6 Compiler in release mode if flash write is needed.
Defect fixes
See the Changelog section of each driver in PDL API reference for all fixes and updates.
Supported software and tools
This version of PDL was validated for compatibility with the following software and tools:
| Software and tools | Version |
|---|---|
| ModusToolbox™ | 3.4.0 |
| core library | 1.4.2 |
| device-db | 4.21.0 |
| CMSIS-Core(M) | 5.8.0 |
| GCC compiler | 11.3.1 |
| IAR compiler | 9.50.2 |
| Arm® compiler 6 | 6.22.0 |
More information
© 2020-2025, Cypress Semiconductor Corporation (an Infineon company) or an affiliate of Cypress Semiconductor Corporation.
mtb-pdl-cat2 peripheral driver library v2.14.0
See the README.md and the
PDL API reference manual
for a complete description of the Peripheral driver library.
What's included?
New Features
- Added Support for PSOC™ 4 HVMS 64K and PSOC™ 4 HVMS 128K device families.
- Added new drivers for the PSOC™ 4 HVMS devices.
Please refer to the New drivers section below for details. - Updated the SAR driver to incorporate PSOC™ 4 HVMS platform configuration.
- Updated the Flash driver with protection control support and ECC support.
- Updated the WDT driver to incorporate PSOC™ 4 HVMS platform configuration.
- Updated the SysPm driver with BOD and OVD support.
- Updated the SysClk driver to incorporate PSOC™ 4 HVMS platform configuration.
- Updated the SysLib driver with Boot status support.
Updated personalities
- Enabled multiple personalities on PSOC™ 4 HVMS Platform:
Comparator, CTBm, DieTemp, Follower, OpAmp, Programmable Analog, UART, DMAC, eeprom, EXTCLK,
HFCLK, ILO-Intrinsic, ILO, IMO, LFCLK, Power Settings, PUMPCLK, SYSCLK, SysClocks, SYSTICK, WDT. - Added new personalities for PSOC™ 4 HVMS Platform:
HVSS, LIN, SAR, diagmux, CRWDT, HPOSC, Lifetime Counter, PILO.
Updated drivers
New drivers
Known Issues
- PDL flash write APIs are not supported when using ARM C6 Compiler in debug mode. Please use ARM C6 Compiler in release mode if flash write is needed.
Defect fixes
See the Changelog section of each driver in PDL API reference for all fixes and updates.
Supported software and tools
This version of PDL was validated for compatibility with the following software and tools:
| Software and tools | Version |
|---|---|
| ModusToolbox™ | 3.2.0 |
| core library | 1.4.3 |
| device-db | 4.20.0 |
| CMSIS-Core(M) | 5.8.0 |
| GCC compiler | 11.3.1 |
| IAR compiler | 9.30.1 |
| Arm® compiler 6 | 6.16 |
More information
© 2020-2024, Cypress Semiconductor Corporation (an Infineon company) or an affiliate of Cypress Semiconductor Corporation.
mtb-pdl-cat2 peripheral driver library v2.13.0
See the README.md and the
PDL API reference manual
for a complete description of the Peripheral driver library.
What's included?
New Features
Updated the USBPD driver to:
- Provide APIs to enable or disable the SBU ADFT block
- Enable battery charging support on Type-A port for the CYPM1011 device
Updated drivers
Defect fixes
See the Changelog section of each driver in PDL API reference for all fixes and updates.
Supported software and tools
This version of PDL was validated for compatibility with the following software and tools:
| Software and tools | Version |
|---|---|
| ModusToolbox™ | 3.2.0 |
| core library | 1.4.2 |
| device-db | 4.17.0 |
| CMSIS-Core(M) | 5.8.0 |
| GCC compiler | 11.3.1 |
| IAR compiler | 9.30.1 |
| Arm® compiler 6 | 6.16 |
More information
© 2020-2024, Cypress Semiconductor Corporation (an Infineon company) or an affiliate of Cypress Semiconductor Corporation.
mtb-pdl-cat2 peripheral driver library v2.12.0
See the README.md and the
PDL API reference manual
for a complete description of the Peripheral driver library.
What's included?
New Features
- Support for new MPNs devices of the PSoC4-S3 device family.
- Support for new MPNs devices of the CCG7S device family.
Defect fixes
See the Changelog section of each driver in PDL API reference for all fixes and updates.
Supported software and tools
This version of PDL was validated for compatibility with the following software and tools:
| Software and tools | Version |
|---|---|
| ModusToolbox™ | 3.2.0 |
| core library | 1.4.2 |
| device-db | 4.17.0 |
| CMSIS-Core(M) | 5.8.0 |
| GCC compiler | 11.3.1 |
| IAR compiler | 9.30.1 |
| Arm® compiler 6 | 6.16 |
More information
© 2020-2024, Cypress Semiconductor Corporation (an Infineon company) or an affiliate of Cypress Semiconductor Corporation.
mtb-pdl-cat2 peripheral driver library v2.11.0
See the README.md and the
PDL API reference manual
for a complete description of the Peripheral driver library.
What's included?
New Features
- Support for new MPNs devices of the PSoC 4000T device family.
- Removed non-primary SWD pin selection.
Defect fixes
See the Changelog section of each driver in PDL API reference for all fixes and updates.
Supported software and tools
This version of PDL was validated for compatibility with the following software and tools:
| Software and tools | Version |
|---|---|
| ModusToolbox™ | 3.2.0 |
| core library | 1.4.1 |
| device-db | 4.16.0 |
| CMSIS-Core(M) | 5.8.0 |
| GCC compiler | 11.3.1 |
| IAR compiler | 9.30.1 |
| Arm® compiler 6 | 6.16 |
More information
© 2020-2024, Cypress Semiconductor Corporation (an Infineon company) or an affiliate of Cypress Semiconductor Corporation.
mtb-pdl-cat2 peripheral driver library v2.10.0
See the README.md and the PDL API reference manual for a complete description of the Peripheral driver library.
What's included?
New Features
- Updated the USBPD driver to enable support for CCG6xF_CFP family devices.
Updated drivers
Defect fixes
See the Changelog section of each driver in PDL API reference for all fixes and updates.
Supported software and tools
This version of PDL was validated for compatibility with the following software and tools:
| Software and tools | Version |
|---|---|
| ModusToolbox™ | 3.2.0 |
| core library | 1.4.1 |
| device-db | 4.15.0 |
| CMSIS-Core(M) | 5.8.0 |
| GCC compiler | 11.3.1 |
| IAR compiler | 9.30.1 |
| Arm® compiler 6 | 6.16 |
More information
© 2020-2024, Cypress Semiconductor Corporation (an Infineon company) or an affiliate of Cypress Semiconductor Corporation.
mtb-pdl-cat2 peripheral driver library v2.9.0
See the README.md and the PDL API reference manual for a complete description of the Peripheral driver library.
What's included?
Updated drivers
Defect fixes
See the Changelog section of each driver in PDL API reference for all fixes and updates.
Supported software and tools
This version of PDL was validated for compatibility with the following software and tools:
| Software and tools | Version |
|---|---|
| ModusToolbox™ | 3.2.0 |
| core library | 1.4.1 |
| device-db | 4.14.0 |
| CMSIS-Core(M) | 5.8.0 |
| GCC compiler | 11.3.1 |
| IAR compiler | 9.30.1 |
| Arm® compiler 6 | 6.16 |
More information
© 2020-2024, Cypress Semiconductor Corporation (an Infineon company) or an affiliate of Cypress Semiconductor Corporation.
release-v.2.8.0
mtb-pdl-cat2 peripheral driver library v2.8.0
See the README.md and the
PDL API reference manual
for a complete description of the Peripheral driver library.
What's included?
New Features
-
New MPNs of CCG7S Device Family were added.
-
Updated Cryptolite driver to add support for:
- SHA-384 and SHA-512
- RSA signature verification using the provided public key
-
USBPD Driver:
- Corrected REFGEN control settings for PMG1S3
- Updated configuration table space for Dock solutions
- Updates related to HPD handling for PMG1S3
-
SCB Driver:
- I2C: Interrupt logic updated to handle the slave not ready condition
- Provided new function Cy_SCB_I2C_SlaveSendAckNack() that the user application can send ACK/NACK and configure buffer
Updated personalities
- MXEZI2C, MXI2C, MXSPI, MXUART, SPI, UART - Resolved issue with empty scb connections
Updated drivers
Known Issues
When WLC1115-68LQXQ or WLC1150-68LQXQ based project is compiled by IAR compiler the following warning issued: "/builds/repo/bsp_csp/output/libs/COMPONENT_CAT2/mtb-pdl-cat2/drivers/source/cy_usbpd_vbus_ctrl.c",4052: dynamic initialization in unreachable code. This warning do not cause any system malfunction.
Defect fixes
See the Changelog section of each driver in PDL API reference for all fixes and updates.
Supported software and tools
This version of PDL was validated for compatibility with the following software and tools:
| Software and tools | Version |
|---|---|
| ModusToolbox™ | 3.1.0 |
| core library | 1.4.1 |
| device-db | 4.11.0 |
| CMSIS-Core(M) | 5.8.0 |
| GCC compiler | 11.3.1 |
| IAR compiler | 9.30.1 |
| Arm® compiler 6 | 6.16 |
More information
© 2020-2024, Cypress Semiconductor Corporation (an Infineon company) or an affiliate of Cypress Semiconductor Corporation.
release-v.2.7.0
mtb-pdl-cat2 peripheral driver library v2.7.0
See the README.md and the
PDL API reference manual
for a complete description of the Peripheral driver library.
What's included?
New Features
- Support for new MPNs devices of the PSoC 4100S MAX device family.
Updated personalities
- USBPD 1.0 - Pwm Fix Freq Dith parameter for buck-boost controller is set to integer type,
fixed enumeration order of Pwm Dithering Type parameter.
Updated drivers
Known Issues
When WLC1115-68LQXQ or WLC1150-68LQXQ based project is compiled by IAR compiler the following warning issued: "/builds/repo/bsp_csp/output/libs/COMPONENT_CAT2/mtb-pdl-cat2/drivers/source/cy_usbpd_vbus_ctrl.c",4052: dynamic initialization in unreachable code. This warning do not cause any system malfunction.
Defect fixes
See the Changelog section of each driver in PDL API reference for all fixes and updates.
Supported software and tools
This version of PDL was validated for compatibility with the following software and tools:
| Software and tools | Version |
|---|---|
| ModusToolbox™ | 3.1.0 |
| core library | 1.3.1 |
| device-db | 4.6.0 |
| CMSIS-Core(M) | 5.8.0 |
| GCC compiler | 11.3.1 |
| IAR compiler | 9.30.1 |
| Arm® compiler 6 | 6.16 |
More information
© 2020-2023, Cypress Semiconductor Corporation (an Infineon company) or an affiliate of Cypress Semiconductor Corporation.
release-v2.6.0
mtb-pdl-cat2 peripheral driver library v2.6.0
See the README.md and the
PDL API reference manual
for a complete description of the Peripheral driver library.
What's included?
New Features
Support for new devices of the WLC1 device family:
- WLC1515-68LDXS
Updated personalities
- I2C 1.0, MXI2C 1.0 - Added INFO DRC about the possible shift of the actual data rate on the I2C bus.
- CANFD 1.0 - Fixed max limits for Message RAM Address offset value not to exceed existing RAM area.
- USBPD 1.0 - Added Default buck-boost controller output voltage field.
Updated drivers
Known Issues
Defect fixes
See the Changelog section of each driver in PDL API reference for all fixes and updates.
Supported software and tools
This version of PDL was validated for compatibility with the following software and tools:
| Software and tools | Version |
|---|---|
| ModusToolbox™ | 3.1.0 |
| core library | 1.3.1 |
| device-db | 4.6.0 |
| CMSIS-Core(M) | 5.8.0 |
| GCC compiler | 11.3.1 |
| IAR compiler | 9.30.1 |
| Arm® compiler 6 | 6.16 |
More information
© 2020-2023, Cypress Semiconductor Corporation (an Infineon company) or an affiliate of Cypress Semiconductor Corporation.