Skip to content

HurricaneJames/rex

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

14 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Setting up Rails for React and Jest

React is Awesome! Rails is Awesome! Jest is awesome! Using Jest with React in Rails should be Awesome Cubed... and yet it seems so difficult.

Introduction

Recently, the author was in a position where a legacy project wanted to redesign the front-end while keeping the Rails backend. The project decided to go with a React based redesign phased in, piecemeal, over time. Eventually the old JavaScript would just disappear.

The old JavaScripts had no unit testing, only some integration testing through Cucumber and Selenium. A key requirement of the new front-end was to add unit-testing to the JavaScripts, hopefully getting to a point where the team could practice some TDD (despite DHH's proclamation that TDD is dead).

Other guides provided quite a bit of insight on the direction to take. Oliver Lance's Rails, React, Browserify: Packaging your React components article was especially useful. However, it did not address testing. Integration tests were possible using Oliver's setup, but Jest was unusable.

This article seeks to provide a decent setup for using React in Rails, with all Node packages, Jest test functionality, and react_ujs Rails helpers. We accomplish this using two sweet gems, react-rails and browserify-rails, and a little bit of glue.

All of the code used in this article is available on GitHub.

The General Outline

Basic Rails Setup

We assume a working knowledge of Rails. However, as a simple scaffolding upon which to build, we will be using the following setup.

  1. rails new rex -T

  2. Remove Turbolinks technically optional

  • from the Gemfile

    # Gemfile
    source 'https://rubygems.org'
    
    gem 'rails', '4.1.8'
    gem 'sqlite3'
    
    gem 'sass-rails', '~> 4.0.3'
    gem 'coffee-rails', '~> 4.0.0'
    gem 'uglifier', '>= 1.3.0'
    gem 'therubyracer',  platforms: :ruby
    
    gem 'jquery-rails'
    gem 'jbuilder', '~> 2.0'
    
    gem 'spring',        group: :development
    gem 'thin'
  • from application.js

    // app/assets/javascripts/application.js
    //= require jquery
    //= require jquery_ujs
    //= require_tree .
  1. cd rex; bundle install

  2. rails generate controller pages index --no-helper --no-assets --no-controller-specs --no-view-specs

  3. Update Rails routes root to new pages#index.

    # config/routes.rb
    Rails.application.routes.draw do
      get 'pages/index'
      root to: 'pages#index'
    end

Add in React-Rails

The best part of React-Rails is the React UJS and the view helpers. However, the stable versions of react-rails only contain react.js. Hopefully the react-rails project will correct this shortcoming in the future as react_ujs is the most valuable part of the gem. In the meantime, use the 1.0.0.pre branch directly from GitHub.

  1. Add 'react-rails' to the Gemfile.

    echo "gem 'react-rails', '~> 1.0.0.pre', github: 'reactjs/react-rails'" >> Gemfile

  2. bundle install

  3. Add react-rails to the application config.

    # config/application.rb
    config.react.variant      = :production
    config.react.addons       = true
  4. Setup react-rails for development mode.

    # config/environments/development.rb
    config.react.variant = :development
  5. Add React to application by adding react via two sprocket includes //= require react and //= require react_ujs. This will change in the next section, but only slightly.

  • First, create a new componetns.js file which will include all of our React components.

    // app/assets/javascripts/components.js
    //= require react
    //= require react_ujs
  • Then update application.js by removing the require_tree directive and including the new components.js code.

    // app/assets/javascripts/application.js
    //= require jquery
    //= require jquery_ujs
    //= require components

At this point it is possible to create React components by placing them in the components.js file and calling them with react_component 'ComponentName', {props} in the Rails views. However, there are some limitations. First, it cannot make use of Jest for testing, though Jasmine and full integration tests should work. Second, it is not possible to require() any node packages. For example, many React applications will want to include node packages like the es6-promise or reflux packages.

Browserify-Rails

The general solution for adding CommonJS and require() for React is to use a package like browserify. Fortunately, there's a gem for that: browserify-rails. Installation is fairly straight forward.

  1. Verify that Node is installed.

  2. Add browserify-rails to the gemfile.

    echo "gem 'browserify-rails', '~>0.5'" >> Gemfile

  3. bundle install

  4. Create a package.json file.

    {
      "name": "rex-app",
      "devDependencies": {
        "browserify": "~>6.3",
        "reactify": "^0.17.1"
      },
      "license": "MIT",
      "engines": {
        "node": ">=0.10.0"
      },
    }

    Important! Any package that needs to be require()d should be added to the devDependencies of package.json.

  5. npm install

    • Note: add /node_modules to the .gitignore file if git is being used.
  6. Enable converstion of JSX to JS by adding the following param to config/application.rb

    config.browserify_rails.commandline_options = "--transform reactify --extension=\".jsx\""
  7. Create a components/ directory in app/assets/javascripts/. All React components will go in this directory.

  8. Add components.

    // app/assets/javascripts/components/DemoComponent.jsx
    var DemoComponent = React.createClass({displayName: 'Demo Component',
      render: function() {
        return <div>Demo Component</div>;
      }
    });
    
    // each file will export exactly one component
    module.exports = DemoComponent;
  9. Update components.js to link required modules from the components directory.

    // note that this is a global assignment, it will be discussed further below
    DemoComponent = require('./components/DemoComponent');
  10. Add the demo component into our view.

    <h1>/app/views/pages/index.html.erb</h1>
    <%= react_component 'DemoComponent', {} %>

This setup gives us require(). However, there are some things to note. First, do not require('react') via CommonJS require(). React is being loaded globaly by react-rails via the sprocket //= require react directive. A second inclusion will cause React to throw errors. Second, each and every single component that should be available globally needs to be require()d in components.js. CommonJS does not have an equivalent to the sprocket //= require_tree directive.

Fixing Browserify/React-Rails

Problem, require('react') is necessary if we want to use Jest. The solution so far provides require() for other libraries, but not require('react'). So, how to get this crucial last requirement. Presently, the only workable solution is to ignore the react.js asset provided by react-rails and use the Node version instead.

  1. Replace //= require react with require('react') in component.js

    // app/assets/javascripts/components.js
    //= require_self
    //= require react_ujs
    
    React = require('react');
    
    // put components here
    DemoComponent = require('./components/DemoComponent');

    //= require_self is called before //= require react_ujs. This allows react.js to be loaded from node modules instead of react-rails.

  2. Update package.json with the following in devDependencies:

    "react": "^0.12.0",
    "react-tools": "^0.12.1"
  3. Run npm install again.

  4. Add var React = require('react'); to your top of each of your components. For example:

    // app/assets/javascripts/components/DemoComponent.jsx
    var React = require('react');
    
    var DemoComponent = React.createClass({displayName: 'Demo Component',
      render: function() {
        return <div>Demo Component</div>;
      }
    });
    
    module.exports = DemoComponent;

Now we can require('react'), export the component via module.exports, and inject components with react_component Rails view helpers.

Jest

We can finally get going with Jest. Jest is based on Jasmine and used by Facebook to test React. It automatically mocks out all modules except those being tested, it can run tests in parallel, and it runs in a fake DOM implementation. Bottom line, Jest is awesome.

However, Jest really wants a CommonJS structure where everything is included via require(). That is why we had to go through all the trouble in the previous sections. Fortunately, now that the hard work is done, making Jest work is relatively easy. It requires updating package.json, creating a new directory, and adding a couple of script files.

  1. Create a directory for the tests in app/assets/javascripts/components/__tests__.

    Note that Rails generally puts tests in a test/ or spec/ directory. However, it is easier to put Jest tests in a __tests__ directory under to the actual components. Otherwise, the test require() statements end up with lots of brittle, ugly ../../../app/assets/javascripts/components/[component]s.

    Placing the tests here has one slight complication though. Sprocket's //= require_tree will include the tests as part of the build. This should not be an issue as the components/ directory should not be part of any //= require_tree directive anyway, as that would also break the CommonJS structure we use.

  2. Create a file app/assets/components/javascripts/__tests__/preprocessor.js to convert any JSX to JS (remember that browserify-rails does this via reactify when running via Rails).

// app/assets/javascripts/components/__tests__/preprocessor.js
var ReactTools = require('react-tools');

module.exports = {
  process: function(src) {
    return ReactTools.transform(src);
  }
};
  1. Add and configure Jest in the package.json
"devDependencies": {
  "jest-cli": "^0.2.0",
},
"scripts": {
  "test": "node ./node_modules/jest-cli/bin/jest.js"
},
"jest": {
  "rootDir": "./app/assets/javascripts/components",
  "scriptPreprocessor": "<rootDir>/__tests__/preprocessor.js",
  "moduleFileExtensions": [ "js", "jsx"],
  "unmockedModulePathPatterns": [
    "react"
  ],
  "testFileExtensions": ["js", "jsx"],
  "testPathIgnorePatterns": [ "preprocessor.js" ]
}
* `rootDir` points to the components directory (Jest will automatically load the __tests__ path by default).
* `scriptPreprocessor` points to our JSX preprocessor script.
* `umockedModulePathPatterns` tells Jest not to mock out React, which we need for our components to work.
* `testPathIgnorePatterns` tells Jest to ignore our JSX preprocessor. Placing `preprocessor.js` in a different directory would eliminate the need for this directive. However, this feels cleaner.
  1. npm install

  2. Create a test for our demo component.

    // app/assets/javascripts/components/__tests__/DemoComponent-test.jsx
    jest.dontMock('../DemoComponent');
    
    describe('DemoComponent', function() {
      it('should tell use it is a demo component', function() {
        var React = require('react/addons');
        var TestUtils = React.addons.TestUtils;
        var DemoComponent = require('../DemoComponent');
        var demoComponent = TestUtils.renderIntoDocument(<DemoComponent/>);
        
        expect(demoComponent.getDOMNode().textContent).toBe('Demo Component');
      });
    });
  3. Run tests with npm test.

Now it is possible to run Jest based tests, require() CommonJS packages, and inject React via Rails views.

Gotchas with jQuery and other Gem-based Assets

The basic Rails application uses the jquery-rails gem. jquery-rails has the same problem with require('jquery') that react-rails has with require('react'). This will be a problem with any application that adds assets via gems and tries to use both //= require and require() for that asset. Fortunately, jQuery is resilient to multiple includes, so the only real concern is bloat.

The maintainers of browserify-rails know about the problem. Hopefully, a solution is found soon. In the mean time, one potential solution is to remove the jquery-rails gem, //= require jquery and //= require jquery_ujs. Another solution, if your project needs these gems, is to add jQuery to application.js the way react.js is added to components.js.

//= require self
//= require jquery_ujs
//= components

$ = jQuery = require('jquery');

Then add jQuery to the devDependencies of package.json.

"devDependencies": {
    "jquery": "^2.1.1"
}

Conclusion

We have setup Rails to work with React, Node packages, and Jest. To use this setup, simply add React components to the app/assets/javascript/components/ directory and put any global components that the react_component view helper might need in app/assets/javascripts/components.js. Tests are simple Jest tests in the app/assets/javascripts/components/__tests/ directory. Rspec/Cucumber integration tests should work as expected too.

Hopefully, this article has been useful to help setup a foundation for using React and Jest in your Rails application.

About

A React in Rails Example

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published