removed tmc and added cross section

config/hardware/extruder/orbiter2.0.cfg

@@ -9,6 +9,7 @@ full_steps_per_rotation: 200
 nozzle_diameter: 0.400
 filament_diameter: 1.75
 max_extrude_only_distance: 110
+max_extrude_cross_section: 5
 sensor_type: ATC Semitec 104GT-2
 min_temp: 10
 max_temp: 270
@@ -17,11 +18,5 @@ min_extrude_temp: 172
 pressure_advance: 0.0475
 pressure_advance_smooth_time: 0.040
 
-[tmc2209 extruder]
-interpolate: false
-run_current: 0.45
-sense_resistor: 0.110
-stealthchop_threshold: 0
-
 # We also include the default wiring from here to avoid duplicating
 [include default_wiring.cfg]