Add doc build snapshot nightly

EVerest · Sep 13, 2024 · 6c0d89e · 6c0d89e
1 parent ed2304a
commit 6c0d89e
Show file tree

Hide file tree

Showing 8 changed files with 94 additions and 74 deletions.
diff --git a/docs/latest/_sources/hardware/pionix_belay_box.rst.txt b/docs/latest/_sources/hardware/pionix_belay_box.rst.txt
@@ -166,27 +166,37 @@ Yocto-based image including EVerest in form of BaseCamp.
 
 Now to the steps to flash the board:
 
-(1) Download the latest stable image and the matching .bmap file:
-  (a) https://pionix-update.de/belaybox-basecamp-demo/stable/belaybox-image-raspberrypi4-20240912100805.rootfs.wic.bz2
-  (b) https://pionix-update.de/belaybox-basecamp-demo/stable/belaybox-image-raspberrypi4-20240912100805.rootfs.wic.bmap
+**STEP 1: Downloading**
 
-(2) Power up the BelayBox or - if the Yak is used alone - apply 12 V to the
-"12 IN" pins.
+Download the latest stable image and the matching .bmap file:
+
+* https://pionix-update.de/belaybox-basecamp-demo/stable/belaybox-image-raspberrypi4-20240912100805.rootfs.wic.bz2
+* https://pionix-update.de/belaybox-basecamp-demo/stable/belaybox-image-raspberrypi4-20240912100805.rootfs.wic.bmap
+
+**STEP 2: Powering up**
+
+Power up the BelayBox or - if the Yak is used alone - apply 12 V to
+the "12 IN" pins.
 
 The red power LED on the Yak should light up constantly now.
 
-(3) Connect the Yak board via Micro-USB to the host system.
+**STEP 3: Connect Yak to host system**
 
-(4) Enable the CM4 storage mode so that the eMMC becomes available to the host
-system:
+Connect the Yak board via Micro-USB to the host system.
 
-.. code-block:: bash
+**STEP 4: Enabling CM4 storage mode**
+
+Enable the CM4 storage mode so that the eMMC becomes available to
+the host system:
 
+.. code-block:: bash
   sudo rpiboot
 
 The green LED on the Yak board should light up constantly now.
 
-(5) To find the eMMC device, do:
+**STEP 5: Finding the eMMC device**
+
+To find the eMMC device, do:
 
 .. code-block:: bash
 
@@ -200,7 +210,9 @@ where X can be any letter.
   Make sure to select the correct device as data loss can occure if the wrong
   device is selected!
 
-(6) Make sure the .wic.bz2 file and the .bmap file are in the same directory
+**STEP 6: Flash the eMMC**
+
+Make sure the .wic.bz2 file and the .bmap file are in the same directory
 and flash the eMMC. In the command below, replace <image file>.bz2 with your
 downloaded image file and replace "X" according to your eMMC device.
 
@@ -215,7 +227,9 @@ After roughly nine minutes the flashing should have finished.
   activates the external antenna support. Running a flashed Yak without the
   WiFi antenna mounted can result in damage of the WiFi chip.
 
-(7) Disconnect the eMMC device, power off and unplug the "boot" jumper from the
+**STEP 7: Finishing**
+
+Disconnect the eMMC device, power off and unplug the "boot" jumper from the
 Yak board.
 
 .. image:: img/yak-assembly-9.jpg

diff --git a/docs/latest/appendix/02_snapshot.html b/docs/latest/appendix/02_snapshot.html
@@ -53,7 +53,7 @@ <h3>Navigation</h3>
 <span class="w">  </span><span class="nt">git_tag</span><span class="p">:</span><span class="w"> </span><span class="l l-Scalar l-Scalar-Plain">2024.6.0</span>
 <span class="nt">everest</span><span class="p">:</span>
 <span class="w">  </span><span class="nt">git</span><span class="p">:</span><span class="w"> </span><span class="l l-Scalar l-Scalar-Plain">git@github.com:EVerest/EVerest.git</span>
-<span class="w">  </span><span class="nt">git_rev</span><span class="p">:</span><span class="w"> </span><span class="l l-Scalar l-Scalar-Plain">7481fe82f79eb5d9dc62d279a1ea5fadb37120f7</span>
+<span class="w">  </span><span class="nt">git_rev</span><span class="p">:</span><span class="w"> </span><span class="l l-Scalar l-Scalar-Plain">5bdbca95d32f22b9cb94b1584c25e59268fa32d7</span>
 <span class="w">  </span><span class="nt">git_tag</span><span class="p">:</span><span class="w"> </span><span class="l l-Scalar l-Scalar-Plain">main</span>
 <span class="nt">everest-core</span><span class="p">:</span>
 <span class="w">  </span><span class="nt">git</span><span class="p">:</span><span class="w"> </span><span class="l l-Scalar l-Scalar-Plain">git@github.com:EVerest/everest-core.git</span>
@@ -73,7 +73,7 @@ <h3>Navigation</h3>
 <span class="w">  </span><span class="nt">git_tag</span><span class="p">:</span><span class="w"> </span><span class="l l-Scalar l-Scalar-Plain">v0.3.1</span>
 <span class="nt">everest.github.io</span><span class="p">:</span>
 <span class="w">  </span><span class="nt">git</span><span class="p">:</span><span class="w"> </span><span class="l l-Scalar l-Scalar-Plain">git@github.com:everest/everest.github.io.git</span>
-<span class="w">  </span><span class="nt">git_rev</span><span class="p">:</span><span class="w"> </span><span class="l l-Scalar l-Scalar-Plain">a705378d48f603891bc9b033fd29b6f86fde4cd8</span>
+<span class="w">  </span><span class="nt">git_rev</span><span class="p">:</span><span class="w"> </span><span class="l l-Scalar l-Scalar-Plain">ed2304afcb00a3dae15e1a29def1bec9a5c21744</span>
 <span class="nt">ext-mbedtls</span><span class="p">:</span>
 <span class="w">  </span><span class="nt">cmake_condition</span><span class="p">:</span><span class="w"> </span><span class="l l-Scalar l-Scalar-Plain">EVEREST_DEPENDENCY_ENABLED_MBEDTLS</span>
 <span class="w">  </span><span class="nt">git</span><span class="p">:</span><span class="w"> </span><span class="l l-Scalar l-Scalar-Plain">https://github.com/EVerest/ext-mbedtls.git</span>

diff --git a/docs/latest/hardware/pionix_belay_box.html b/docs/latest/hardware/pionix_belay_box.html
@@ -178,30 +178,24 @@ <h3><span class="section-number">11.2.2. </span>Flashing the Yak Board<a class="
 <a class="reference external" href="https://github.com/PionixPublic/yeti-yak-sdk">Yeti-Yak-SDK repository</a>.</p>
 </div>
 <p>Now to the steps to flash the board:</p>
-<ol class="arabic simple">
-<li><p>Download the latest stable image and the matching .bmap file:</p></li>
-</ol>
-<blockquote>
-<div><ol class="loweralpha simple">
+<p><strong>STEP 1: Downloading</strong></p>
+<p>Download the latest stable image and the matching .bmap file:</p>
+<ul class="simple">
 <li><p><a class="reference external" href="https://pionix-update.de/belaybox-basecamp-demo/stable/belaybox-image-raspberrypi4-20240912100805.rootfs.wic.bz2">https://pionix-update.de/belaybox-basecamp-demo/stable/belaybox-image-raspberrypi4-20240912100805.rootfs.wic.bz2</a></p></li>
 <li><p><a class="reference external" href="https://pionix-update.de/belaybox-basecamp-demo/stable/belaybox-image-raspberrypi4-20240912100805.rootfs.wic.bmap">https://pionix-update.de/belaybox-basecamp-demo/stable/belaybox-image-raspberrypi4-20240912100805.rootfs.wic.bmap</a></p></li>
-</ol>
-</div></blockquote>
-<p>(2) Power up the BelayBox or - if the Yak is used alone - apply 12 V to the
-“12 IN” pins.</p>
+</ul>
+<p><strong>STEP 2: Powering up</strong></p>
+<p>Power up the BelayBox or - if the Yak is used alone - apply 12 V to
+the “12 IN” pins.</p>
 <p>The red power LED on the Yak should light up constantly now.</p>
-<ol class="arabic simple" start="3">
-<li><p>Connect the Yak board via Micro-USB to the host system.</p></li>
-</ol>
-<p>(4) Enable the CM4 storage mode so that the eMMC becomes available to the host
-system:</p>
-<div class="highlight-bash notranslate"><div class="highlight"><pre><span></span>sudo<span class="w"> </span>rpiboot
-</pre></div>
-</div>
+<p><strong>STEP 3: Connect Yak to host system</strong></p>
+<p>Connect the Yak board via Micro-USB to the host system.</p>
+<p><strong>STEP 4: Enabling CM4 storage mode</strong></p>
+<p>Enable the CM4 storage mode so that the eMMC becomes available to
+the host system:</p>
 <p>The green LED on the Yak board should light up constantly now.</p>
-<ol class="arabic simple" start="5">
-<li><p>To find the eMMC device, do:</p></li>
-</ol>
+<p><strong>STEP 5: Finding the eMMC device</strong></p>
+<p>To find the eMMC device, do:</p>
 <div class="highlight-bash notranslate"><div class="highlight"><pre><span></span>lsblk
 </pre></div>
 </div>
@@ -212,7 +206,8 @@ <h3><span class="section-number">11.2.2. </span>Flashing the Yak Board<a class="
 <p>Make sure to select the correct device as data loss can occure if the wrong
 device is selected!</p>
 </div>
-<p>(6) Make sure the .wic.bz2 file and the .bmap file are in the same directory
+<p><strong>STEP 6: Flash the eMMC</strong></p>
+<p>Make sure the .wic.bz2 file and the .bmap file are in the same directory
 and flash the eMMC. In the command below, replace &lt;image file&gt;.bz2 with your
 downloaded image file and replace “X” according to your eMMC device.</p>
 <div class="highlight-bash notranslate"><div class="highlight"><pre><span></span>sudo<span class="w"> </span>bmaptool<span class="w"> </span>copy<span class="w"> </span>&lt;image<span class="w"> </span>file&gt;.bz2<span class="w"> </span>/dev/sdX
@@ -225,7 +220,8 @@ <h3><span class="section-number">11.2.2. </span>Flashing the Yak Board<a class="
 activates the external antenna support. Running a flashed Yak without the
 WiFi antenna mounted can result in damage of the WiFi chip.</p>
 </div>
-<p>(7) Disconnect the eMMC device, power off and unplug the “boot” jumper from the
+<p><strong>STEP 7: Finishing</strong></p>
+<p>Disconnect the eMMC device, power off and unplug the “boot” jumper from the
 Yak board.</p>
 <img alt="../_images/yak-assembly-9.jpg" src="../_images/yak-assembly-9.jpg" />
 <p>With the raspberry CM4, it can be that the overlay filesystem sometimes does

diff --git a/docs/latest/searchindex.js b/docs/latest/searchindex.js
diff --git a/docs/nightly/_sources/hardware/pionix_belay_box.rst.txt b/docs/nightly/_sources/hardware/pionix_belay_box.rst.txt
@@ -166,27 +166,37 @@ Yocto-based image including EVerest in form of BaseCamp.
 
 Now to the steps to flash the board:
 
-(1) Download the latest stable image and the matching .bmap file:
-  (a) https://pionix-update.de/belaybox-basecamp-demo/stable/belaybox-image-raspberrypi4-20240912100805.rootfs.wic.bz2
-  (b) https://pionix-update.de/belaybox-basecamp-demo/stable/belaybox-image-raspberrypi4-20240912100805.rootfs.wic.bmap
+**STEP 1: Downloading**
 
-(2) Power up the BelayBox or - if the Yak is used alone - apply 12 V to the
-"12 IN" pins.
+Download the latest stable image and the matching .bmap file:
+
+* https://pionix-update.de/belaybox-basecamp-demo/stable/belaybox-image-raspberrypi4-20240912100805.rootfs.wic.bz2
+* https://pionix-update.de/belaybox-basecamp-demo/stable/belaybox-image-raspberrypi4-20240912100805.rootfs.wic.bmap
+
+**STEP 2: Powering up**
+
+Power up the BelayBox or - if the Yak is used alone - apply 12 V to
+the "12 IN" pins.
 
 The red power LED on the Yak should light up constantly now.
 
-(3) Connect the Yak board via Micro-USB to the host system.
+**STEP 3: Connect Yak to host system**
 
-(4) Enable the CM4 storage mode so that the eMMC becomes available to the host
-system:
+Connect the Yak board via Micro-USB to the host system.
 
-.. code-block:: bash
+**STEP 4: Enabling CM4 storage mode**
+
+Enable the CM4 storage mode so that the eMMC becomes available to
+the host system:
 
+.. code-block:: bash
   sudo rpiboot
 
 The green LED on the Yak board should light up constantly now.
 
-(5) To find the eMMC device, do:
+**STEP 5: Finding the eMMC device**
+
+To find the eMMC device, do:
 
 .. code-block:: bash
 
@@ -200,7 +210,9 @@ where X can be any letter.
   Make sure to select the correct device as data loss can occure if the wrong
   device is selected!
 
-(6) Make sure the .wic.bz2 file and the .bmap file are in the same directory
+**STEP 6: Flash the eMMC**
+
+Make sure the .wic.bz2 file and the .bmap file are in the same directory
 and flash the eMMC. In the command below, replace <image file>.bz2 with your
 downloaded image file and replace "X" according to your eMMC device.
 
@@ -215,7 +227,9 @@ After roughly nine minutes the flashing should have finished.
   activates the external antenna support. Running a flashed Yak without the
   WiFi antenna mounted can result in damage of the WiFi chip.
 
-(7) Disconnect the eMMC device, power off and unplug the "boot" jumper from the
+**STEP 7: Finishing**
+
+Disconnect the eMMC device, power off and unplug the "boot" jumper from the
 Yak board.
 
 .. image:: img/yak-assembly-9.jpg

diff --git a/docs/nightly/appendix/02_snapshot.html b/docs/nightly/appendix/02_snapshot.html
@@ -53,7 +53,7 @@ <h3>Navigation</h3>
 <span class="w">  </span><span class="nt">git_tag</span><span class="p">:</span><span class="w"> </span><span class="l l-Scalar l-Scalar-Plain">2024.6.0</span>
 <span class="nt">everest</span><span class="p">:</span>
 <span class="w">  </span><span class="nt">git</span><span class="p">:</span><span class="w"> </span><span class="l l-Scalar l-Scalar-Plain">git@github.com:EVerest/EVerest.git</span>
-<span class="w">  </span><span class="nt">git_rev</span><span class="p">:</span><span class="w"> </span><span class="l l-Scalar l-Scalar-Plain">7481fe82f79eb5d9dc62d279a1ea5fadb37120f7</span>
+<span class="w">  </span><span class="nt">git_rev</span><span class="p">:</span><span class="w"> </span><span class="l l-Scalar l-Scalar-Plain">5bdbca95d32f22b9cb94b1584c25e59268fa32d7</span>
 <span class="w">  </span><span class="nt">git_tag</span><span class="p">:</span><span class="w"> </span><span class="l l-Scalar l-Scalar-Plain">main</span>
 <span class="nt">everest-core</span><span class="p">:</span>
 <span class="w">  </span><span class="nt">git</span><span class="p">:</span><span class="w"> </span><span class="l l-Scalar l-Scalar-Plain">git@github.com:EVerest/everest-core.git</span>
@@ -73,7 +73,7 @@ <h3>Navigation</h3>
 <span class="w">  </span><span class="nt">git_tag</span><span class="p">:</span><span class="w"> </span><span class="l l-Scalar l-Scalar-Plain">v0.3.1</span>
 <span class="nt">everest.github.io</span><span class="p">:</span>
 <span class="w">  </span><span class="nt">git</span><span class="p">:</span><span class="w"> </span><span class="l l-Scalar l-Scalar-Plain">git@github.com:everest/everest.github.io.git</span>
-<span class="w">  </span><span class="nt">git_rev</span><span class="p">:</span><span class="w"> </span><span class="l l-Scalar l-Scalar-Plain">a705378d48f603891bc9b033fd29b6f86fde4cd8</span>
+<span class="w">  </span><span class="nt">git_rev</span><span class="p">:</span><span class="w"> </span><span class="l l-Scalar l-Scalar-Plain">ed2304afcb00a3dae15e1a29def1bec9a5c21744</span>
 <span class="nt">ext-mbedtls</span><span class="p">:</span>
 <span class="w">  </span><span class="nt">cmake_condition</span><span class="p">:</span><span class="w"> </span><span class="l l-Scalar l-Scalar-Plain">EVEREST_DEPENDENCY_ENABLED_MBEDTLS</span>
 <span class="w">  </span><span class="nt">git</span><span class="p">:</span><span class="w"> </span><span class="l l-Scalar l-Scalar-Plain">https://github.com/EVerest/ext-mbedtls.git</span>

diff --git a/docs/nightly/hardware/pionix_belay_box.html b/docs/nightly/hardware/pionix_belay_box.html
@@ -178,30 +178,24 @@ <h3><span class="section-number">11.2.2. </span>Flashing the Yak Board<a class="
 <a class="reference external" href="https://github.com/PionixPublic/yeti-yak-sdk">Yeti-Yak-SDK repository</a>.</p>
 </div>
 <p>Now to the steps to flash the board:</p>
-<ol class="arabic simple">
-<li><p>Download the latest stable image and the matching .bmap file:</p></li>
-</ol>
-<blockquote>
-<div><ol class="loweralpha simple">
+<p><strong>STEP 1: Downloading</strong></p>
+<p>Download the latest stable image and the matching .bmap file:</p>
+<ul class="simple">
 <li><p><a class="reference external" href="https://pionix-update.de/belaybox-basecamp-demo/stable/belaybox-image-raspberrypi4-20240912100805.rootfs.wic.bz2">https://pionix-update.de/belaybox-basecamp-demo/stable/belaybox-image-raspberrypi4-20240912100805.rootfs.wic.bz2</a></p></li>
 <li><p><a class="reference external" href="https://pionix-update.de/belaybox-basecamp-demo/stable/belaybox-image-raspberrypi4-20240912100805.rootfs.wic.bmap">https://pionix-update.de/belaybox-basecamp-demo/stable/belaybox-image-raspberrypi4-20240912100805.rootfs.wic.bmap</a></p></li>
-</ol>
-</div></blockquote>
-<p>(2) Power up the BelayBox or - if the Yak is used alone - apply 12 V to the
-“12 IN” pins.</p>
+</ul>
+<p><strong>STEP 2: Powering up</strong></p>
+<p>Power up the BelayBox or - if the Yak is used alone - apply 12 V to
+the “12 IN” pins.</p>
 <p>The red power LED on the Yak should light up constantly now.</p>
-<ol class="arabic simple" start="3">
-<li><p>Connect the Yak board via Micro-USB to the host system.</p></li>
-</ol>
-<p>(4) Enable the CM4 storage mode so that the eMMC becomes available to the host
-system:</p>
-<div class="highlight-bash notranslate"><div class="highlight"><pre><span></span>sudo<span class="w"> </span>rpiboot
-</pre></div>
-</div>
+<p><strong>STEP 3: Connect Yak to host system</strong></p>
+<p>Connect the Yak board via Micro-USB to the host system.</p>
+<p><strong>STEP 4: Enabling CM4 storage mode</strong></p>
+<p>Enable the CM4 storage mode so that the eMMC becomes available to
+the host system:</p>
 <p>The green LED on the Yak board should light up constantly now.</p>
-<ol class="arabic simple" start="5">
-<li><p>To find the eMMC device, do:</p></li>
-</ol>
+<p><strong>STEP 5: Finding the eMMC device</strong></p>
+<p>To find the eMMC device, do:</p>
 <div class="highlight-bash notranslate"><div class="highlight"><pre><span></span>lsblk
 </pre></div>
 </div>
@@ -212,7 +206,8 @@ <h3><span class="section-number">11.2.2. </span>Flashing the Yak Board<a class="
 <p>Make sure to select the correct device as data loss can occure if the wrong
 device is selected!</p>
 </div>
-<p>(6) Make sure the .wic.bz2 file and the .bmap file are in the same directory
+<p><strong>STEP 6: Flash the eMMC</strong></p>
+<p>Make sure the .wic.bz2 file and the .bmap file are in the same directory
 and flash the eMMC. In the command below, replace &lt;image file&gt;.bz2 with your
 downloaded image file and replace “X” according to your eMMC device.</p>
 <div class="highlight-bash notranslate"><div class="highlight"><pre><span></span>sudo<span class="w"> </span>bmaptool<span class="w"> </span>copy<span class="w"> </span>&lt;image<span class="w"> </span>file&gt;.bz2<span class="w"> </span>/dev/sdX
@@ -225,7 +220,8 @@ <h3><span class="section-number">11.2.2. </span>Flashing the Yak Board<a class="
 activates the external antenna support. Running a flashed Yak without the
 WiFi antenna mounted can result in damage of the WiFi chip.</p>
 </div>
-<p>(7) Disconnect the eMMC device, power off and unplug the “boot” jumper from the
+<p><strong>STEP 7: Finishing</strong></p>
+<p>Disconnect the eMMC device, power off and unplug the “boot” jumper from the
 Yak board.</p>
 <img alt="../_images/yak-assembly-9.jpg" src="../_images/yak-assembly-9.jpg" />
 <p>With the raspberry CM4, it can be that the overlay filesystem sometimes does

diff --git a/docs/nightly/searchindex.js b/docs/nightly/searchindex.js