DatavenueLiveObjects · tomekmalek · Nov 30, 2022 · Nov 16, 2022
diff --git a/README.md b/README.md
@@ -201,15 +201,15 @@ void loop()
 
 ## Toubleshooting ##
 ### My payload is truncated on Live Objects ###
-This can happen with large payload, because of the fixed-size JSON storage allocated for processing your payload (512 bytes by default). You can allocate more room by modifying the value in the **'LiveObjects.h'** file at line 8:
+This can happen with large payload, because of the fixed-size JSON storage allocated for processing your payload (1024 bytes by default). You can allocate more room by modifying the value in the **'LiveObjectsBase.h'** file at line 13 e.g.:
 ```c++
-#define PAYLOAD_DATA_SIZE 1024
+#define PAYLOAD_DATA_SIZE 2048
 ```
 
 ### My parameters are not registered on Live Objects ###
-Same reason as above, it can happen if you have a large number of parameters. You need to allocate more room by modifying the value in the **'LiveObjects.h'** file at line 7:
+Same reason as above, it can happen if you have a large number of parameters. You need to allocate more room by modifying the value in the **'LiveObjectsBase.h'** file at line 13 e.g.:
 ```c++
-#define PAYLOAD_DATA_SIZE 1024
+#define PAYLOAD_DATA_SIZE 2048
 ```
 ### One of my command is not working ###
 If you have many arguments in your command, first check that you get all the arguments when entering the function:
@@ -222,7 +222,8 @@ void blinkLED(const String arguments, String &response) {
   ...
 }
 ```
-If your arguments are incomplete, try allocating more room for JSON storage by modifying the value in the **'LiveObjects.h'** file at line 7:
+If your arguments are incomplete, try allocating more room for JSON storage by modifying the value in the **'LiveObjectsBase.h'** file at line 13 e.g.:
 ```c++
-#define PAYLOAD_DATA_SIZE 1024
+#define PAYLOAD_DATA_SIZE 2048
 ```
+
diff --git a/examples/7_distance_and_light_sensor/README.md b/examples/7_distance_and_light_sensor/README.md
@@ -32,7 +32,13 @@ If you want to limit amount of data which are being sent from board to Live Obje
 To achieve this goal, you need to create **private binary decoder** in Live Objects portal. Use: *Data -> Decoders -> +Add*. You an enter data as below and click **Save**.
 
 ![binary_decoder](img/binary_decoder.png)
-
+|Field                     |Value                                                      |
+|--------------------------|-----------------------------------------------------------|
+|Name                      |VL6180Xbin                                                 |
+|Model                     |VL6180Xbin100                                              |
+|Type                      |Parameterized (Binary)                                     |
+|Binary payload description|ubyte distance; float amblight;                            |
+|Template                  |{\\"distance\\":{{distance}}, "amblight\\":{{amblight}}\\"}|
 <br>
 
 ### MQTT interface modification
@@ -48,10 +54,13 @@ Then click **Identity** and next click icon in red circle. After that in field *
 ![mod_interface](img/mod_interface_1.png)
 
 ## Running
-First of all, be sure that you installed the required libraries and generated an API key mentioned in the main **README.md** file, then:
-1. Open *7_distance_and_light_sensor.ino* sketch using Arduino IDE,
-2. Replace ```const char SECRET_LIVEOBJECTS_API_KEY[]="...";``` in *arduino_secrets.h* with API key you generated,
-3. Define necessary credentials for your board in *arduino_secrets.h*:
+To use a software you need to:
+1. Log in to [Live Objects](https://liveobjects.orange-business.com) or request a [trial account](https://liveobjects.orange-business.com/#/request_account) (up to 10 devices for 1 year) if you don't have one,
+2. Create an [API key](https://liveobjects.orange-business.com/#/administration/apikeys) for your device. Give it a name, select the *Device access* role and validate. Copy the key,
+3. Clone or download the directory from Github,
+4. Open *7_distance_and_light_sensor.ino* sketch using Arduino IDE,
+5. Replace ```const char SECRET_LIVEOBJECTS_API_KEY[]="...";``` in *[arduino_secrets.h](arduino_secrets.h)* with API key you generated,
+6. Define necessary credentials for your board in *arduino_secrets.h*:
 - for WiFi boards: 
     - ```extern const String SECRET_SSID = "...;```
     - ```extern const String SECRET_WIFI_PASS = "...";```
@@ -60,9 +69,9 @@ First of all, be sure that you installed the required libraries and generated an
     - ```extern const String SECRET_APN = "";``` (if needed),
     - ```extern const String SECRET_APN_USER = "...";``` (if needed),
     - ```extern const String SECRET_APN_PASS = "...";```   (if needed),
-4. In ```lo.setSecurity()``` select security mode using ```TLS``` or ```NONE``` according to board abilities shown in **Compatibility** point in main **README.md**,
-5. Upload *7_distance_and_light_sensor.ino* sketch to your board.
-6. In your terminal window you should see similiar output:
+7. In ```lo.setSecurity()``` select security mode using ```TLS``` or ```NONE``` according to board abilities shown in **Compatibility** point in main **README.md**,
+8. Upload *7_distance_and_light_sensor.ino* sketch to your board.
+9. In your terminal window you should see similiar output:
 
 ```
 15:31:22.732 -> 
@@ -117,23 +126,35 @@ If you want to limit amount of data which are being sent from board to Live Obje
 To achieve this goal, you need to create **private sms decoder** in Live Objects portal. Use: *Data -> Decoders -> +Add*. You an enter data as below and click **Save**.
 
 ![sms_decoder](img/sms_decoder.png)
-
+|Field              |Value                                                      |
+|-------------------|-----------------------------------------------------------|
+|Name               |VL6180Xsms                                                |
+|Model              |VL6180Xs                                              |
+|Type               |Parameterized (CSV)                                     |
+|Columns description|[{"name": "distance","jsonType": "NUMERIC"},{"name": "amblight","jsonType": "NUMERIC"}]|
+|Parser options     |{"columnSeparator": ";","quoteChar": "\"","useEscapeChar": false,"escapeChar": "\\","skipWhiteSpace": false,"lineFeedSeparator": "\n"}|
+|Template           |{distance:{{distance}}, amblight:{{amblight}}}|
+<br>
 ### SMS interface modification
 
 You need to modify SMS interface for you device in similar way as for MQTT device selecting **VL6180Xsms** decoder.
 
 ## Running
-First of all, be sure that you installed the required libraries and generated an API key mentioned in the main **README.md** file, then:
-1. Open *7_distance_and_light_sensor.ino* sketch using Arduino IDE,
-2. Replace ```const char SECRET_LIVEOBJECTS_API_KEY[]="...";``` in *arduino_secrets.h* with API key you generated,
-3. Specify the number of sever (gate) in *arduino_secrets.h*:
-    - ```extern const String SECRET_SERVER_MSISDN = "...";```,
-4. In ```lo.setSecurity()``` select security mode ```NONE```
-5. Upload *7_distance_and_light_sensor.ino* sketch to your board.
-6. In your terminal window you should see similiar output:
+To use a software you need to:
+1. Log in to [Live Objects](https://liveobjects.orange-business.com) or request a [trial account](https://liveobjects.orange-business.com/#/request_account) (up to 10 devices for 1 year) if you don't have one,
+2. Create an [API key](https://liveobjects.orange-business.com/#/administration/apikeys) for your device. Give it a name, select the *Device access* role and validate. Copy the key,
+3. Clone or download the directory from Github,
+4. Open *7_distance_and_light_sensor.ino* sketch using Arduino IDE,
+5. Replace ```const char SECRET_LIVEOBJECTS_API_KEY[]="...";``` in *[arduino_secrets.h](arduino_secrets.h)* with API key you generated,
+6. Specify the number of sever (gate):
+    - ```extern const String SECRET_SERVER_MSISDN = "...";``` - the same number needs to be used in interface of sms device. **Every Orange operator has its individual number.**
+    ![sms_int](img/sms_int2.png)
+7. In ```lo.setSecurity()``` select security mode ```NONE```
+8. Upload *7_distance_and_light_sensor.ino* sketch to your board.
+9. In your terminal window you should see similiar output:
 
 ```
-3:00:46.470 -> VL6180X  sensor
+13:00:46.470 -> VL6180X  sensor
 13:00:46.470 -> Model ID = 180
 13:00:46.470 -> Model Rev = 13
 13:00:46.470 -> Module Rev = 12
@@ -155,4 +176,6 @@ First of all, be sure that you installed the required libraries and generated an
 
 ## Verify
 
-You can verify if device is online and data are delivered in the same way as it is described for MQTT device.
+You can verify if device is online and data are delivered in the same way as it is described for MQTT device. You need to take into account that SMS devices are always **Online**.
+
+![sms_dev](img/sms_dev.png)
diff --git a/examples/7_distance_and_light_sensor/img/binary_decoder.png b/examples/7_distance_and_light_sensor/img/binary_decoder.png
diff --git a/examples/7_distance_and_light_sensor/img/sms_decoder.png b/examples/7_distance_and_light_sensor/img/sms_decoder.png
diff --git a/examples/7_distance_and_light_sensor/img/sms_dev.png b/examples/7_distance_and_light_sensor/img/sms_dev.png
diff --git a/examples/7_distance_and_light_sensor/img/sms_int2.png b/examples/7_distance_and_light_sensor/img/sms_int2.png