Simple testing device for Mega Drive/Genesis controllers.
Does not support the extra functionality of a 6-button pad.
| Part | Quantity |
|---|---|
| LED 5mm | 7 |
| Resistor 10K (THT or 0805) | 7 |
| Resistor 270Ω (THT or 0805) | 7 |
| SPDT slide switch | 1 |
| Right angle DE9 (male) | 1 |
| USB Micro port | 1* |
| 2-pin header 2.54mm pitch | 1* |
* For power, either or both may be installed.
- Connect controller to DE9 port
- Apply +5V power though USB port or alternate power header.
- With SELECT switch in left position, LEDs will illuninate for Up, Down, Left, Right, B and C.
- With SELECT switch in right position, LEDs will illuninate for Up, Down, A and Start. (Left and Right will both remain illuminated, this is normal).
Public domain.
You are free to produce PCBs based on this project's designs at your own risk and without limitation, for your own use or for sale and/or repair at a reasonable price. Attribution is appreciated. The authors are not obliged to provide support of any kind.
Under no circumstances will the authors be held responsible or liable in any way for losses, damages or costs resulting from the use of the information and/or resources of this project.
The resources are provided "as-is" without warranty of any kind, either expressed or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.