Skip to content

SKUF Network Boot System allows you to boot diskless Arch Linux using SAMBA (no PXE required)

Notifications You must be signed in to change notification settings

BiteDasher/skuf

Folders and files

NameName
Last commit message
Last commit date

Latest commit

ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 

Repository files navigation

skuf

SKUF - Suckless Kexec Using Fileshare

Ever wanted to be able to boot Linux1 over the network using an Ethernet cable but without setting up a PXE? Now you only need a SMB server that can be installed anywhere!

SKUF Network Boot System allows you to boot the Arch Linux2 operating system on a computer connected to network via Ethernet using USB flash drive (150MB minimum) and a SMB file share.

Caution

The only supported distribution is Arch Linuxโ„ข. Other shitty systems like Debian, Ubuntu, Manjaro, Fedora, openSUSE, etc. are NOT supported and NEVER WILL BE.

Requirements

Two computers in the same network:

Server:

  • Running SMB file server
  • Your user on the SMB server has a password. Users without password or anonymous access are not supported

Client:

  • Connected to network via Ethernet cable. Wireless is not supported.
  • A temporary USB stick/CD/DVD with the skuflinux image (you can also use Ventoy)
  • Brain not poisoned with beer so you have enough brain cells to read this manual

Caution

Prebuilt binaries and ISO images will NEVER be available due to possible security risks. Read the build instructions carefully.

Scheme of work

Note

The example illustrates how the server and client work together.
Server โ€” a computer with the SMB server running.
Client โ€” a computer that will boot the system from the server over the network using a cable

You have a USB flash drive/CD/DVD with an ISO image of skuflinux on it. You have two PCs in your room/college/office. First one is the one you will be sitting at. The other one is running SMB server with a directory that you have write access to. That directory contains filesystem image with the Arch Linux distribution and the skuf package installed on it.

Step 1: Loading kernel and initramfs from SMB server

After booting from USB drive with skuflinux you will be prompted to enter SMB server address and port, user credentials and path to filesystem image (you can unplug your USB flash drive at this point). Now SKUF script will do the following:

  • Obtain an IP address using dhcpcd
  • Mount the SMB directory (read-only)
  • Mount the image volume with Arch Linux (read-only)
  • Generate an encrypted string with your answers to the questions asked earlier
  • Load kernel and initramfs from a previously mounted Arch Linux image into RAM
  • Unmount SMB and image volume with Arch Linux
  • Execute kexec

Step 2: Re-mounting SMB and running system

Now when the kernel and initramfs of your Arch Linux were loaded from SMB server, SKUF mounts system image again:

  • The newly booted system obtaining IP address again
  • The previously encrypted string contained your answers to the questions. It was passed to the kernel command line (/proc/cmdline) in encrypted form, and will now be decrypted, so you don't have to write it all over again.
  • Mounting the SMB directory again (read/write)
  • Mounting the image with Arch Linux again (read/write)
  • Once everything mounted, SKUF executes switch_root and system is booted. Congratulations!

Building

See also: Arch Wiki article

Caution

The only supported distribution is Arch Linuxโ„ข. Other shitty systems like Debian, Ubuntu, Manjaro, Fedora, openSUSE, etc. are NOT supported and NEVER WILL BE.

To build SKUF on a non-Arch-based system, run Arch Linux, for example, in a docker container:

docker run -it archlinux

Required packages

  • arch-install-scripts
  • archiso
  • base
  • base-devel
  • binutils
  • clang or gcc
  • musl
  • linux-api-headers
  • kernel-headers-musl
  • patch (optional, for build_rootfs_tar.sh, if patches present)

Build instructions

Clone this repository using git:

git clone https://github.com/BiteDasher/skuf
cd skuf
./switch-tag latest

Tune encryption obfuscation and encryption password (see Customization instructions):

vim tune.password
vim tune.crypt

Setup defaults for ISO (optional):

vim defaults

Install required packages:

./install_deps.sh

Run configuraion sripts:

./tune_crypt.sh
./tune_password.sh
./setup_defaults.sh

Build SKUF:

./build_rootfs_tar.sh
./build_package.sh
./setup_repo.sh
./build_iso.sh
./create_image.sh SIZE_IN_GIGABYTES additional_packages
# For sparse file, use ./create_image.sh -s

Note

Basic installation of Arch Linux without GUI or any additional software takes about 1 GB.

Done! ๐Ÿ’ช๐ŸŽ‰ Now write skuflinux-smth.iso to your USB drive, put arch.ext4 into your directory on SMB server and try SKUF Network Boot System.

Customisation instructions

Password tuning

String for /proc/cmdline is encrypted using OpenSSL. You need to specify encryption password and number of iterations in the tune.password file in following format:

ITERATIONS_COUNT PASSWORD

Note

For an example, see the tune.passwordX file

Obfuscation tuning

String that is encrypted through OpenSSL is eventually turned into a base64 string. You can obfuscate this string by swapping these symbols. Write pairs of letters or numbers in the following format to the tune.crypt file:

A B
X Y
I O
0 1
4 8

Note

For an example, see the tune.cryptX file

Defaults setup

When you booted up the skuflinux ISO image from your media device, you will be asked questions like: SMB server address, SMB server port, SMB protocol version and so on. Edit the defaults file if you want to preset them manually.

Table of main SKUF variables:

Variable Meaning
SAMBA_USERNAME Username for the SMB server *
SAMBA_PASSWORD User password for the SMB server *
SAMBA_ADDRESS Address of the SMB server where the client directory with the Arch Linux image is located *
SAMBA_PORT SMB server port
SAMBA_VERSION SMB server protocol version
SAMBA_DOMAIN Domain for the SMB server (default domain is WORKGROUP)
VOLUME_PATH Path to the directory on the SMB server where the client Arch Linux image volume and swap file are located(see Tips and Tricks) *
VOLUME_FILENAME Arch Linux image volume name that is located in VOLUME_PATH *
SWAP_FILENAME Swap file name that is located in VOLUME_PATH
SAMBA_EXTRA_MOUNT_OPTS Additional SMB mount options. Applies to both step 1 and step 2 of SKUF boot process
VOLUME_EXTRA_MOUNT_OPTS Additional client Arch Linux image volume mount options. Applies to both step 1 and step 2 of SKUF boot process
CHECK_FS Whether to check the integrity of a file system image with Arch Linux. Accepts Yes or No. Applies only to step 2
EXTRA_KERNEL_OPTS Additional linux kernel options
PATH_TO_NEW_KERNEL Path to the new kernel that will be loaded using kexec. The new kernel must be in the Arch Linux image that is lies on SMB server *
PATH_TO_NEW_INITRAMFS Path to the new initramfs that will be loaded using kexec alongside kernel. The new initramfs must be in the Arch Linux image that is lies on SMB server *

Table of auxiliary SKUF variables:

Variable Meaning
MAX_SMB_RETRY_COUNT Maximum number of attempts to re-enter SMB credentials if the first mount attempt failed. Applies only to step 1
SKIP Automate the startup process. Set to 0 or nothing if you want to achieve the default behavior of having to enter answers to questions using keyboard. Set to 1 if you want the startup to proceed without your participation. Be sure you have set all the mandatory variables! Applies to step 1

Note

"Mandatory" variables are marked with an asterisk at the end.

Note

  • Use ,,, as a separator in extra mount options to specify additional mount options that will be concatenated and applied only to step 2 (i.e. mount options specified only before ,,, will be applied to step 1 and options specified both before and after ,,, will be applied to step 2).
  • Use ,,,| as a separator in extra mount options to specify different mount options for step 1 and step 2 (i.e. everything before ,,,| will be applied only to step 1 and everything after ,,,| will be appled only to step 2).

Presets using bootloader (iMac with wireless keyboard)

If you need to change any presets before booting into SKUF, you can change the bootable kernel parameters through the bootloader. This can be useful when you have, for example, an iMac with a wireless keyboard that only works in EFI applications. The way to change kernel parameters depends on the bootloader:

  • syslinux: hit Tab and start typing
  • grub2: select entry in menu and click e to open editor
  • systemd-boot: click e and start typing

1. Set presets using variables

You can specify presets using one or more kernel variables like this:

skuf.samba_username="Username with spaces"
skuf.SAMBA_PASSWORD='Password \' with \\ character escaping'
skuf.VOLUME_PATH=Path\ with\ spaces\ and\ \"quotes\'
skuf.skip=1

The syntax of the variable is as follows: skuf. + any variable from SKUF variable table in lower or upper case.

Note

  • To escape " inside "double quotes", use \"
  • To escape ' inside 'single quotes', use \'
  • To escape ", ', (whitespace) in case of missing quotation marks, use \", \', \ respectively
  • In all cases above, to escape \ themselves, use \\

2. Set presets using curly or square brackets at the end of kernel parameters

Important

Variables set via this method will be prioritized over every variable you specified in method โ„–1

Curly brackets allow you to set several variables at once:

{username;password;address;;;;volume\\path;volume \; file;;;;;;/kernel;/initramfs}

The syntax corresponds to the order of the main variables from the SKUF variable table separated from each other by semicolons.

Note

  • To escape ;, use \;
  • To escape \ themselves, use \\

Square brackets allow you to set only username and password at the same time:

[username;password;with;semicolons]

Note

Unlike curly brackets, there's no escaping required.


  • In case you did not specify skuf.skip in the kernel parameters, but used brackets or specified other kernel variables, script will attempt to apply skuf.skip=1, but only if you have set (or have already set) the 7 mandatory variables listed above.

  • Setting skuf.skip=1 will omit all variable checks.

  • The skuf.skip preset in the kernel parameters will have a higher priority than same SKIP preset set in the defaults file.

Updating

To update remote systems, use the update_remote_systems.sh script from this repository. It should work on all linux systems with bash and a couple of basic utilities installed. Short links: spoo.me/updskuf yaso.su/updskuf

skuf_update_demo Demonstration of the script running in tmux mode

Let's assume you have an SMB server mounted in /samba:

/samba
โ”œโ”€โ”€ John Doe
โ”‚   โ””โ”€โ”€ arch.ext4
โ”œโ”€โ”€ Foo Bar
โ”‚   โ””โ”€โ”€ arch.ext4
โ””โ”€โ”€ Lady Muck
    โ””โ”€โ”€ arch.ext4

And so, you need to run the following command to update these 3 systems:

./update_remote_systems.sh /samba/*/arch.ext4

Tip

To update SKUF and the system itself, put the package file somewhere and add -p /path/to/skuf.pkg.tar to script arguments.

Note

To skip a specific system for update, create the /etc/skuf_disable_external_update file on the client system.

Tips and Tricks

  • It is highly recommended to have an individual folder with a volume file in it for each user on the SMB server. With this setup, there will be fewer possible caching issues (e.g. cache=singleclient).

  • You can place a swap file next to the Arch Linux image volume so you can use it on your system. The swap file will be connected over the network as a loop device.

  • You can use Plymouth in step 2. Add splash to EXTRA_KERNEL_OPTS to the defaults file, also don't forget to add HOOKS=(... plymouth ...) to the skuf_src/mkinitcpio.conf and install plymouth package.

  • In step 1, you can write @u@ and @fu@ in the path to the client(your) directory, in the path to the image volume file and in the swap file. If you login as john@corp.domain, @u@ will be john and @fu@ will be john@corp.domain.

  • After building the ISO image and creating a file system image with Arch Linux you can execute sudo ./clean.sh to remove unnedeed files.

  • You can execute custom post-install script/binary inside chroot during image creation via ./create_image.sh. To do this, specify the file location via the POST_INSTALL environment variable.

  • Password for root and test users in arch.ext4 is 0000

  • If you enter something incorrectly while entering SMB address, kernel path, etc. at step 1 and fall into the interactive shell, write reboot -f. No, you cannot restart the script. Train your attention.

  • If the client computer has UEFI, you can install SKUF on a FAT32 EFI partition so you don't have to use a USB flash drive/CD/DVD. To do this, mount skuflinux-smth.iso somewhere (like /mnt), then copy /mnt/skuf/boot/x86_64/{vmlinuz-linux,initramfs-linux.img} to FAT32 EFI partition and execute efibootmgr -c -d /dev/sdX -p Y -u 'initrd=\initramfs-linux.img' -l '\vmlinuz-linux' -L 'SKUF' where /dev/sdX is the target disk and Y is the target FAT32 EFI partition number.

Demonstration

skuf_demo.mp4

Afterword

Huge thanks to the Arch Linux development team for their awesome distribution, archiso and mkinitcpio utilities. They made the creation of this project much easier.

Footnotes

  1. The registered trademark Linuxยฎ is used pursuant to a sublicense from LMI, the exclusive licensee of Linus Torvalds, owner of the mark on a world-wide basis. โ†ฉ

  2. Copyright ยฉ 2002-2024 Judd Vinet, Aaron Griffin and Levente Polyรกk. The Arch Linux name and logo are recognized trademarks. Some rights reserved. โ†ฉ