MINTEMP, Slightly lower temperature before triggering sensor fault. #233
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
In Scotland it gets cold. At startup in Winter, the temps were reading 3-4 degrees, so triggering a sensor missing fault. Until warmed up with a hairdryer ! I'm not sure if zero, or negative value is acceptable so I've changed MINTEMP from 5 to 1. If zero is OK then I'd go for that.
|
maybe you should check for yourself, if a disconnected thermistor still gets detected reliably with this setting. |
|
Once I’ve worked out what I need to do to build the modified firmware, I’ll check.
At 25C the resistance would be 100k
At 0C it would be ~300k
A disconnected thermistor should be >1m which would be lower than –25C
So it depends, if the software handles lower values.
From: fjohannes
Sent: Saturday, March 6, 2021 5:51 PM
To: BCN3D/BCN3DSigma-Firmware
Cc: platenboring ; Author
Subject: Re: [BCN3D/BCN3DSigma-Firmware] MINTEMP, Slightly lower temperature before triggering sensor fault. (#233)
maybe you should check for yourself, if a disconnected thermistor still gets detected reliably with this setting.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub, or unsubscribe.
|
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
In Scotland it gets cold.
At startup in Winter, the temps were reading 3-4 degrees, so triggering a sensor missing fault. Until warmed up with a hairdryer !
I'm not sure if zero, or negative value is acceptable so I've changed MINTEMP from 5 to 1.
If zero is OK then I'd go for that.