Denali - Release 1.1

Changes from Release 1.02 - Mechanical:

• add edwardyeeks and papejelly x carriage/toohead to the machine
• add official sherpa mini support

Changes from Release 1.02 - Electrical/Software:

• add mounting brackets for the Bigtreetech expander board (for 3 additional drivers)
• update configs for rotation distance

Notes:

• This will be the last release until the redoubt gantry is merged into this design

Denali - Release 1.02

Project Denali is a CoreXY, Moving Bed, Medium Size, Direct Drive, FDM Printer

The main goal was to reduce complexity, while providing a fast reliable and ultimately simpler printer.

Our discord server can be found here: https://discord.gg/MzTR3zE

BOM/Sourcing Guide for a 250x250x200 Build can be found here: https://docs.google.com/spreadsheets/d/1O3eyVuQ6M4F03MJSDs4Z71_XyNjXL5HFTZr1jsaAtRc/edit?usp=sharing
Frame Calculator: https://docs.google.com/spreadsheets/d/17bdA1itJfFXpg5xXoUhM7PC9FFtjTBpXj1FjgBG_8xA/edit?usp=sharing

This printer features the following:

• Fully Enclosed Design
• Supported Build Volumes of ~200x200x200 to ~350x350x300
• Single Direct Drive Fed Extruder (V6/Volcano and Mosquito Hotends Supported)
• CoreXY Belt Path
• Moving Bed with Tri-Stepper Leveling and Squaring
• MGN9H Rail/Carriage Combo on all Axis
• Dual Rail X Axis for Increased Stability
• 0.9 Deg XY Steppers, 1.8 Deg Z and E Steppers
• 6mm Belts on XY, 1204 Ballscrews on Z
• Minimal Printed Parts
• Designed to be Printed with ABS
• 32 bit controller standard, Dual Bigtree Tech SKRs + TMC2209 Drivers or Single FYSETC S6 + TMC2209 Drivers
• 24V Power Standard
• AC Mains Bed with Thermal Cutoff Fusing
• Powered by Klipper: https://github.com/KevinOConnor/klipper/