Chhogori (K2) - Summit Edition: is a Medium Format, Direct Drive, Fully Enclosed FDM Printer.

Our discord server can be found here: https://discord.gg/MzTR3zE

Stats:

Fully Enclosed Design
2020, 2040, and 2060 Frame Members
Insulated Build Chamber (Not Heated)
Build Volumes of ~250^3 to 500^3 (use of whole plate available) + additional area to purge and wipe
- Z can theoretically be 1m tall, just not fully supported or tested
Direct Drive Extruder (Sherpa Mini or Ascender)
Shortest Belt Paths Possible, 4 Motors, 2 Per X, 2 Per Y Axis
Moving Bed, Fixed Gantry
MGN12C Rails for XYZ Stationary Rails
MGN12C Rails with 1515 Backers for XY Cross (Moving Members)
12mm Belts on XY Motion
1204 Ballscrews with Oldham Joints or 15mm 3HTD Belts with Planetary Gearbox Motors or 60:1 Worm Drive on Z to lift the Bed
Heavy Duty Bearings
NEMA17 Motors XYZ
Minimal Printed Parts (ABS or ASA Required)
Fysetc Spider or S6 Controller + BTT Expander Board with Klipper Required
Mosquito Style Hot End Standard, Dragon Style Hot End Supported
24V Power Standard
Mains Bed

Changes from Release 2 - RC3 - Mechanical:

addition of ascender support
movement of mag+ toolhead to STLs_experimental folder, as it did not meet the launch cutoff period (we still dont have one in hand)
minor printability improvements on some parts