Aircoookie · blazoncek · Dec 18, 2023 · Jun 13, 2023 · Jun 14, 2023 · Jun 14, 2023
diff --git a/CHANGELOG.md b/CHANGELOG.md
@@ -1,5 +1,15 @@
 ## WLED changelog
 
+#### Build 2311160
+-   Version bump: 0.14.1-b1
+-   Bugfixes (#3526, #3502, #3496, #3484, #3487, #3445, #3466, #3296, #3382, #3312)
+-   New feature: Sort presets by ID
+-   New usermod: LDR sensor (#3490 by @JeffWDH)
+-   Effect: Twinklefox & Tinklecat metadata fix
+-   Effect: separate #HH and #MM for Scrolling Text (#3480)
+-   SSDR usermod enhancements (#3368)
+-   PWM fan usermod enhancements (#3414)
+
 #### Build 2310010, build 2310130
 -   Release of WLED version 0.14.0 "Hoshi"
 -   Bugfixes for #3400, #3403, #3405
@@ -422,7 +432,7 @@
 
 -   Added application level pong websockets reply (#2139)
 -   Use AsyncTCP 1.0.3 as it mitigates the flickering issue from 0.13.0-b2
--   Fixed transition manually updated in preset overriden by field value
+-   Fixed transition manually updated in preset overridden by field value
 
 #### Build 2108050
 
@@ -951,7 +961,7 @@
 
 #### Build 2011040
 
--   Inversed Rain direction (fixes #1147)
+-   Inverted Rain direction (fixes #1147)
 
 #### Build 2011010
 
@@ -1162,7 +1172,7 @@
 
 -   Added module info page to web UI
 -   Added realtime override functionality to web UI
--   Added individial segment power and brightness to web UI
+-   Added individual segment power and brightness to web UI
 -   Added feature to one-click select single segment only by tapping segment name
 -   Removed palette jumping to default if color is changed
 

diff --git a/package-lock.json b/package-lock.json
diff --git a/package.json b/package.json
@@ -1,6 +1,6 @@
 {
   "name": "wled",
-  "version": "0.14.0",
+  "version": "0.14.1-b1",
   "description": "Tools for WLED project",
   "main": "tools/cdata.js",
   "directories": {

diff --git a/platformio.ini b/platformio.ini
@@ -217,7 +217,7 @@ build_flags =
   ; restrict to minimal mime-types
   -DMIMETYPE_MINIMAL
   ; other special-purpose framework flags (see https://docs.platformio.org/en/latest/platforms/espressif8266.html)
-  ; -D PIO_FRAMEWORK_ARDUINO_MMU_CACHE16_IRAM48 ;; in case of linker errors like "section `.text1' will not fit in region `iram1_0_seg'"
+  -D PIO_FRAMEWORK_ARDUINO_MMU_CACHE16_IRAM48 ;; in case of linker errors like "section `.text1' will not fit in region `iram1_0_seg'"
   ; -D PIO_FRAMEWORK_ARDUINO_MMU_CACHE16_IRAM48_SECHEAP_SHARED ;; (experimental) adds some extra heap, but may cause slowdown
 
 lib_deps =
@@ -654,7 +654,7 @@ build_flags = ${common.build_flags_esp32}
   -D RLYPIN=19
   -D BTNPIN=17
   -D IRPIN=18
-  -D UWLED_USE_MY_CONFIG
+  -U WLED_USE_MY_CONFIG
   -D USERMOD_DALLASTEMPERATURE
   -D USERMOD_FOUR_LINE_DISPLAY
   -D TEMPERATURE_PIN=23

diff --git a/readme.md b/readme.md
@@ -26,7 +26,7 @@ A fast and feature-rich implementation of an ESP8266/ESP32 webserver to control
 - Up to 250 user presets to save and load colors/effects easily, supports cycling through them.  
 - Presets can be used to automatically execute API calls  
 - Nightlight function (gradually dims down)  
-- Full OTA software updatability (HTTP + ArduinoOTA), password protectable  
+- Full OTA software updateability (HTTP + ArduinoOTA), password protectable  
 - Configurable analog clock (Cronixie, 7-segment and EleksTube IPS clock support via usermods) 
 - Configurable Auto Brightness limit for safe operation  
 - Filesystem-based config for easier backup of presets and settings  

diff --git a/usermods/Animated_Staircase/Animated_Staircase.h b/usermods/Animated_Staircase/Animated_Staircase.h
@@ -133,7 +133,7 @@ class Animated_Staircase : public Usermod {
     *            received within this time, an object is detected
     *            and the function will return true.
     *
-    * The speed of sound is 343 meters per second at 20 degress Celcius.
+    * The speed of sound is 343 meters per second at 20 degrees Celsius.
     * Since the sound has to travel back and forth, the detection
     * distance for the sensor in cm is (0.0343 * maxTimeUs) / 2.
     *
@@ -259,7 +259,7 @@ class Animated_Staircase : public Usermod {
       }
     }
 
-    // send sesnor values to JSON API
+    // send sensor values to JSON API
     void writeSensorsToJson(JsonObject& staircase) {
       staircase[F("top-sensor")]    = topSensorRead;
       staircase[F("bottom-sensor")] = bottomSensorRead;
@@ -297,8 +297,8 @@ class Animated_Staircase : public Usermod {
         offIndex = maxSegmentId = strip.getLastActiveSegmentId() + 1;
 
         // shorten the strip transition time to be equal or shorter than segment delay
-        transitionDelayTemp = transitionDelay = segment_delay_ms;
-        strip.setTransition(segment_delay_ms/100);
+        transitionDelay = segment_delay_ms;
+        strip.setTransition(segment_delay_ms);
         strip.trigger();
       } else {
         if (togglePower && !on && offMode) toggleOnOff(); // toggle power on if off
@@ -309,7 +309,7 @@ class Animated_Staircase : public Usermod {
           seg.setOption(SEG_OPTION_ON, true);
         }
         strip.trigger();  // force strip update
-        stateChanged = true;  // inform external dvices/UI of change
+        stateChanged = true;  // inform external devices/UI of change
         colorUpdated(CALL_MODE_DIRECT_CHANGE);
         DEBUG_PRINTLN(F("Animated Staircase disabled."));
       }
@@ -492,7 +492,7 @@ class Animated_Staircase : public Usermod {
       bottomEchoPin         = top[FPSTR(_bottomEcho_pin)] | bottomEchoPin;
 
       topMaxDist    = top[FPSTR(_topEchoCm)] | topMaxDist;
-      topMaxDist    = min(150,max(30,(int)topMaxDist));     // max distnace ~1.5m (a lag of 9ms may be expected)
+      topMaxDist    = min(150,max(30,(int)topMaxDist));     // max distance ~1.5m (a lag of 9ms may be expected)
       bottomMaxDist = top[FPSTR(_bottomEchoCm)] | bottomMaxDist;
       bottomMaxDist = min(150,max(30,(int)bottomMaxDist));  // max distance ~1.5m (a lag of 9ms may be expected)
 

diff --git a/usermods/Animated_Staircase/README.md b/usermods/Animated_Staircase/README.md
@@ -38,7 +38,7 @@ Maximum distance for ultrasonic sensor can be configured as the time needed for
 You _may_ need to use 10k pull-down resistors on the selected PIR pins, depending on the sensor.
 
 ## WLED configuration
-1. In the WLED UI, confgure a segment for each step. The lowest step of the stairs is the 
+1. In the WLED UI, configure a segment for each step. The lowest step of the stairs is the 
    lowest segment id. 
 2. Save your segments into a preset. 
 3. Ideally, add the preset in the config > LED setup menu to the "apply 
@@ -91,7 +91,7 @@ To enable the usermod again, use `"enabled":true`.
 Alternatively you can use _Usermod_ Settings page where you can change other parameters as well.
 
 ### Changing animation parameters and detection range of the ultrasonic HC-SR04 sensor
-Using _Usermod_ Settings page you can define different usermod parameters, includng sensor pins, delay between segment activation etc.
+Using _Usermod_ Settings page you can define different usermod parameters, including sensor pins, delay between segment activation etc.
 
 When an ultrasonic sensor is enabled you can enter maximum detection distance in centimeters separately for top and bottom sensors.
 

diff --git a/usermods/BH1750_v2/readme.md b/usermods/BH1750_v2/readme.md
@@ -9,7 +9,7 @@ The luminance is displayed in both the Info section of the web UI, as well as pu
   - This must be added under `lib_deps` in your `platformio.ini` (or `platformio_override.ini`).
 - Data is published over MQTT - make sure you've enabled the MQTT sync interface.
 
-## Compiliation
+## Compilation
 
 To enable, compile with `USERMOD_BH1750` defined  (e.g. in `platformio_override.ini`)
 ```ini

diff --git a/usermods/BH1750_v2/usermod_bh1750.h b/usermods/BH1750_v2/usermod_bh1750.h
@@ -25,7 +25,7 @@
 #define USERMOD_BH1750_FIRST_MEASUREMENT_AT 10000
 #endif
 
-// only report if differance grater than offset value
+// only report if difference grater than offset value
 #ifndef USERMOD_BH1750_OFFSET_VALUE
 #define USERMOD_BH1750_OFFSET_VALUE 1
 #endif

diff --git a/usermods/BME280_v2/usermod_bme280.h b/usermods/BME280_v2/usermod_bme280.h
@@ -31,7 +31,7 @@ class UsermodBME280 : public Usermod
 
   // set the default pins based on the architecture, these get overridden by Usermod menu settings
   #ifdef ESP8266
-    //uint8_t RST_PIN = 16; // Uncoment for Heltec WiFi-Kit-8
+    //uint8_t RST_PIN = 16; // Un-comment for Heltec WiFi-Kit-8
   #endif
   bool initDone = false;
 
@@ -78,7 +78,7 @@ class UsermodBME280 : public Usermod
   static const char _name[];
   static const char _enabled[];
 
-  // Read the BME280/BMP280 Sensor (which one runs depends on whether Celsius or Farenheit being set in Usermod Menu)
+  // Read the BME280/BMP280 Sensor (which one runs depends on whether Celsius or Fahrenheit being set in Usermod Menu)
   void UpdateBME280Data(int SensorType)
   {
     float _temperature, _humidity, _pressure;

diff --git a/usermods/Battery/readme.md b/usermods/Battery/readme.md
@@ -19,7 +19,7 @@ If you have an ESP32 board, connect the positive side of the battery to ADC1 (GP
 - 💯 Displays current battery voltage 
 - 🚥 Displays battery level
 - 🚫 Auto-off with configurable Threshold
-- 🚨 Low power indicator with many configuration posibilities
+- 🚨 Low power indicator with many configuration possibilities
 
 ## 🎈 Installation
 
@@ -41,7 +41,7 @@ define `USERMOD_BATTERY` in `wled00/my_config.h`
 | `USERMOD_BATTERY_MEASUREMENT_INTERVAL`          | ms          | battery check interval. defaults to 30 seconds                                        |
 | `USERMOD_BATTERY_MIN_VOLTAGE`                   | v           | minimum battery voltage. default is 2.6 (18650 battery standard)                      |
 | `USERMOD_BATTERY_MAX_VOLTAGE`                   | v           | maximum battery voltage. default is 4.2 (18650 battery standard)                      |
-| `USERMOD_BATTERY_TOTAL_CAPACITY`                | mAh         | the capacity of all cells in parralel sumed up                                        |
+| `USERMOD_BATTERY_TOTAL_CAPACITY`                | mAh         | the capacity of all cells in parallel summed up                                       |
 | `USERMOD_BATTERY_CALIBRATION`                   |             | offset / calibration number, fine tune the measured voltage by the microcontroller    |
 | Auto-Off                                        | ---         | ---                                                                                   |
 | `USERMOD_BATTERY_AUTO_OFF_ENABLED`              | true/false  | enables auto-off                                                                      |

diff --git a/usermods/DHT/usermod_dht.h b/usermods/DHT/usermod_dht.h
@@ -49,7 +49,7 @@
 #endif
 
 // how many seconds after boot to take first measurement, 90 seconds
-// 90 gives enough time to OTA update firmware if this crashses
+// 90 gives enough time to OTA update firmware if this crashes
 #ifndef USERMOD_DHT_FIRST_MEASUREMENT_AT
 #define USERMOD_DHT_FIRST_MEASUREMENT_AT 90000
 #endif

diff --git a/usermods/EXAMPLE_v2/usermod_v2_example.h b/usermods/EXAMPLE_v2/usermod_v2_example.h
@@ -46,7 +46,7 @@ class MyExampleUsermod : public Usermod {
     static const char _enabled[];
 
 
-    // any private methods should go here (non-inline methosd should be defined out of class)
+    // any private methods should go here (non-inline method should be defined out of class)
     void publishMqtt(const char* state, bool retain = false); // example for publishing MQTT message
 
 

diff --git a/usermods/Enclosure_with_OLED_temp_ESP07/usermod.cpp b/usermods/Enclosure_with_OLED_temp_ESP07/usermod.cpp
@@ -15,23 +15,23 @@ OneWire oneWire(13);
 DallasTemperature sensor(&oneWire);
 long temptimer = millis();
 long lastMeasure = 0;
-#define Celsius // Show temperature mesaurement in Celcius otherwise is in Fahrenheit 
+#define Celsius // Show temperature measurement in Celsius otherwise is in Fahrenheit 
 
 // If display does not work or looks corrupted check the
 // constructor reference:
 // https://github.com/olikraus/u8g2/wiki/u8x8setupcpp
 // or check the gallery:
 // https://github.com/olikraus/u8g2/wiki/gallery
-// --> First choise of cheap I2C OLED 128X32 0.91"
+// --> First choice of cheap I2C OLED 128X32 0.91"
 U8X8_SSD1306_128X32_UNIVISION_HW_I2C u8x8(U8X8_PIN_NONE, U8X8_PIN_SCL, U8X8_PIN_SDA); // Pins are Reset, SCL, SDA
-// --> Second choise of cheap I2C OLED 128X64 0.96" or 1.3"
+// --> Second choice of cheap I2C OLED 128X64 0.96" or 1.3"
 //U8X8_SSD1306_128X64_NONAME_HW_I2C u8x8(U8X8_PIN_NONE, U8X8_PIN_SCL, U8X8_PIN_SDA); // Pins are Reset, SCL, SDA
 // gets called once at boot. Do all initialization that doesn't depend on
 // network here
 void userSetup() {
   sensor.begin(); //Start Dallas temperature sensor
   u8x8.begin();
-  //u8x8.setFlipMode(1); //Uncoment if using WLED Wemos shield 
+  //u8x8.setFlipMode(1); //Un-comment if using WLED Wemos shield 
   u8x8.setPowerSave(0);
   u8x8.setContrast(10); //Contrast setup will help to preserve OLED lifetime. In case OLED need to be brighter increase number up to 255
   u8x8.setFont(u8x8_font_chroma48medium8_r);
@@ -71,7 +71,7 @@ void userLoop() {
     if (mqtt != nullptr)
     {
       sensor.requestTemperatures();
-//Gets prefered temperature scale based on selection in definitions section
+//Gets preferred temperature scale based on selection in definitions section
       #ifdef Celsius
       float board_temperature = sensor.getTempCByIndex(0);
       #else
@@ -138,11 +138,11 @@ void userLoop() {
   // First row with Wifi name
   u8x8.setCursor(1, 0);
   u8x8.print(knownSsid.substring(0, u8x8.getCols() > 1 ? u8x8.getCols() - 2 : 0));
-  // Print `~` char to indicate that SSID is longer, than owr dicplay
+  // Print `~` char to indicate that SSID is longer than our display
   if (knownSsid.length() > u8x8.getCols())
     u8x8.print("~");
 
-  // Second row with IP or Psssword
+  // Second row with IP or Password
   u8x8.setCursor(1, 1);
   // Print password in AP mode and if led is OFF.
   if (apActive && bri == 0)

diff --git a/usermods/Enclosure_with_OLED_temp_ESP07/usermod_bme280.cpp b/usermods/Enclosure_with_OLED_temp_ESP07/usermod_bme280.cpp
@@ -10,7 +10,7 @@
 
 void UpdateBME280Data();
 
-#define Celsius // Show temperature mesaurement in Celcius otherwise is in Fahrenheit 
+#define Celsius // Show temperature measurement in Celsius otherwise is in Fahrenheit 
 BME280I2C bme;    // Default : forced mode, standby time = 1000 ms
                   // Oversampling = pressure ×1, temperature ×1, humidity ×1, filter off,
 
@@ -20,14 +20,14 @@ uint8_t SDA_PIN = 21;
 #else //ESP8266 boards
 uint8_t SCL_PIN = 5;
 uint8_t SDA_PIN = 4;
-// uint8_t RST_PIN = 16; // Uncoment for Heltec WiFi-Kit-8
+// uint8_t RST_PIN = 16; // Un-comment for Heltec WiFi-Kit-8
 #endif
 
 //The SCL and SDA pins are defined here.
 //ESP8266 Wemos D1 mini board use SCL=5 SDA=4 while ESP32 Wemos32 mini board use SCL=22 SDA=21
 #define U8X8_PIN_SCL SCL_PIN
 #define U8X8_PIN_SDA SDA_PIN
-//#define U8X8_PIN_RESET RST_PIN // Uncoment for Heltec WiFi-Kit-8
+//#define U8X8_PIN_RESET RST_PIN // Un-comment for Heltec WiFi-Kit-8
 
 // If display does not work or looks corrupted check the
 // constructor reference:
@@ -36,9 +36,9 @@ uint8_t SDA_PIN = 4;
 // https://github.com/olikraus/u8g2/wiki/gallery
 // --> First choise of cheap I2C OLED 128X32 0.91"
 U8X8_SSD1306_128X32_UNIVISION_HW_I2C u8x8(U8X8_PIN_NONE, U8X8_PIN_SCL, U8X8_PIN_SDA); // Pins are Reset, SCL, SDA
-// --> Second choise of cheap I2C OLED 128X64 0.96" or 1.3"
+// --> Second choice of cheap I2C OLED 128X64 0.96" or 1.3"
 //U8X8_SSD1306_128X64_NONAME_HW_I2C u8x8(U8X8_PIN_NONE, U8X8_PIN_SCL, U8X8_PIN_SDA); // Pins are Reset, SCL, SDA
-// --> Third choise of Heltec WiFi-Kit-8 OLED 128X32 0.91"
+// --> Third choice of Heltec WiFi-Kit-8 OLED 128X32 0.91"
 //U8X8_SSD1306_128X32_UNIVISION_HW_I2C u8x8(U8X8_PIN_RESET, U8X8_PIN_SCL, U8X8_PIN_SDA); // Constructor for Heltec WiFi-Kit-8
 // gets called once at boot. Do all initialization that doesn't depend on network here
 
@@ -181,11 +181,11 @@ void userLoop() {
   // First row with Wifi name
   u8x8.setCursor(1, 0);
   u8x8.print(knownSsid.substring(0, u8x8.getCols() > 1 ? u8x8.getCols() - 2 : 0));
-  // Print `~` char to indicate that SSID is longer, than owr dicplay
+  // Print `~` char to indicate that SSID is longer than our display
   if (knownSsid.length() > u8x8.getCols())
     u8x8.print("~");
 
-  // Second row with IP or Psssword
+  // Second row with IP or Password
   u8x8.setCursor(1, 1);
   // Print password in AP mode and if led is OFF.
   if (apActive && bri == 0)

diff --git a/usermods/Fix_unreachable_netservices_v2/readme.md b/usermods/Fix_unreachable_netservices_v2/readme.md
@@ -2,7 +2,7 @@
 
 **Attention: This usermod compiles only for ESP8266**
 
-This usermod-v2 modification performs a ping request to a local IP address every 60 seconds. This ensures WLED net services remain accessible in some problematic WLAN environments.
+This usermod-v2 modification performs a ping request to a local IP address every 60 seconds. This ensures WLED net services remain accessible in some problematic WiFi environments.
 
 The modification works with static or DHCP IP address configuration.
 
@@ -24,7 +24,7 @@ The usermod supports the following state changes:
 
 | JSON key    | Value range      | Description                     |
 |-------------|------------------|---------------------------------|
-| PingDelayMs | 5000 to 18000000 | Deactivdate/activate the sensor |
+| PingDelayMs | 5000 to 18000000 | Deactivate/activate the sensor  |
 
  Changes also persist after a reboot.
 

diff --git a/usermods/Internal_Temperature_v2/usermod_internal_temperature.h b/usermods/Internal_Temperature_v2/usermod_internal_temperature.h
@@ -15,7 +15,7 @@ class InternalTemperatureUsermod : public Usermod
   static const char _enabled[];
   static const char _loopInterval[];
 
-  // any private methods should go here (non-inline methosd should be defined out of class)
+  // any private methods should go here (non-inline method should be defined out of class)
   void publishMqtt(const char *state, bool retain = false); // example for publishing MQTT message
 
 public:

diff --git a/usermods/LDR_Dusk_Dawn_v2/README.md b/usermods/LDR_Dusk_Dawn_v2/README.md
@@ -0,0 +1,26 @@
+# LDR_Dusk_Dawn_v2
+This usermod will obtain readings from a Light Dependent Resistor (LDR) and will turn on/off specific presets based on those readings. This is useful for exterior lighting situations where you want the lights to only be on when it is dark out.
+
+# Installation
+Add "-D USERMOD_LDR_DUSK_DAWN" to your platformio.ini [common] build_flags and build.
+
+Example:
+```
+[common]
+build_flags =
+  -D USERMOD_LDR_DUSK_DAWN   # Enable LDR Dusk Dawn Usermod
+```
+
+# Usermod Settings
+Setting | Description | Default
+--- | --- | ---
+Enabled | Enable/Disable the LDR functionality. | Disabled
+LDR Pin | The analog capable pin your LDR is connected to. | 34
+Threshold Minutes | The number of minutes of consistent readings above/below the on/off threshold before the LED state will change. | 5
+Threshold | The analog read value threshold from the LDR. Readings lower than this number will count towards changing the LED state to off. You can see the current LDR reading by going into the info section when LDR functionality is enabled. | 1000
+On Preset | The WLED preset to be used for the LED on state. | 1
+Off Preset | The WLED preset to be used for the LED off state. | 2
+
+## Author
+[@jeffwdh](https://github.com/jeffwdh)  
+jeffwdh@tarball.ca