Skip to content

v1.3 Redesigned (again)
Compare
Choose a tag to compare
@0xjmux 0xjmux released this 05 Feb 22:43
· 11 commits to main since this release
v1.3
3037a5f
This commit was signed with the committer’s verified signature.
0xjmux Jacob
SSH Key Fingerprint: Dn8kgHFtShH5iD85/Oyus/MVZu7nIsCzJD4r2PRCOKQ
Verified
Learn about vigilant mode.
  • Added headers that allow you to easily reverse UART TX-RX in case it was mixed up on the board you're testing. Just cut the solderjumpers on the bottom of the board, add header pins to the top, and the direction is now easily changeable.
  • I hadn't checked that the symbol and footprint orientation for the SOICbite matched on 1.2, and when they arrived it didn't work. Removed the TC2050 UART connector (because who's ever going to use it)
  • Added a SOICbite connector on the side of the board with TX-RX pins connected together, allowing you to test that the adapter & drivers are working correctly via UART loopback.
  • Added notes to the schematic to make pinouts clear for anyone reading it, so the same mistake isn't made again. Pinouts like would be needed on the board the adapter connects to have also been added, to make setup a breeze for anyone using the adapter, or SOICbite in general. All my custom symbols can be found in jmux-kicad-things
Assets 5
Loading