ADS1118.v.bak

module ADS1118
(
	input CLK_50M, 
	input [15:0]ADconfig,
	output SIMO,   //slave input master output （master为FPGA）write config to AD,Din
	output SCLK,   //时钟
	input  SOMI,   //slave output master input  Dout
	output CS, //片选（低电平有效）
	output reg [15:0]ADdata
);
reg [8:0]clkcnt;
reg [5:0]cnt;
reg [15:0]config_reg;
reg [15:0]data_reg;
reg CLK_50k;

always @(posedge CLK_50M ) begin
	clkcnt<=(clkcnt<499)?clkcnt+1:0;
	CLK_50k<=(clkcnt==0)?~CLK_50k:CLK_50k;
end

assign SCLK<=(cnt>1&&cnt<18)?0:CLK_50k;

always@(posedge CLK_50k)
begin
	cnt<=(cnt<57)?cnt+1:0;
	CS<=(cnt<20)?0:1;
end

always @(posedge CLK_50k or negedge rst_n ) begin
	if(!rst_n)begin
		config_reg<=0;
		MOSI<=0;
	end
	else begin
		case (cnt)
			0:begin
				config_reg<=ADconfig;
				MOSI<=1'b0;
			end 
			1:MOSI<=config_reg [15];
			2:MOSI<=config_reg [14];
			3:MOSI<=config_reg [13];
			4:MOSI<=config_reg [12];
			5:MOSI<=config_reg [11];
			6:MOSI<=config_reg [10];
			7:MOSI<=config_reg [9];
			8:MOSI<=config_reg [8];
			9:MOSI<=config_reg [7];
			10:MOSI<=config_reg[6];
			11:MOSI<=config_reg[5];
			12:MOSI<=config_reg[4];
			13:MOSI<=config_reg[3];
			14:MOSI<=config_reg[2];
			15:MOSI<=config_reg[1];
			16:MOSI<=config_reg[0];
			default: MOSI<=1'b0;
		endcase
	end
end

always @(negedge CLK_50k or negedge rst_n ) begin
	if(!rst_n)begin
		data_reg<=0;
	end
	else begin
		case (cnt)
			0:begin
				ADdata<=data_reg;
			end 
			2 :data_reg[15]<=MISO;
			3 :data_reg[14]<=MISO;
			4 :data_reg[13]<=MISO;
			5 :data_reg[12]<=MISO;
			6 :data_reg[11]<=MISO;
			7 :data_reg[10]<=MISO;
			8 :data_reg[9]<=MISO;
			9 :data_reg[8]<=MISO;
			10:data_reg[7]<=MISO;
			11:data_reg[6]<=MISO;
			12:data_reg[5]<=MISO;
			13:data_reg[4]<=MISO;
			14:data_reg[3]<=MISO;
			15:data_reg[2]<=MISO;
			16:data_reg[1]<=MISO;
			17:data_reg[0]<=MISO;
			default:;
		endcase
	end
end

endmodule