mqtt-sn-check.yml

name: MQTT-SN Build Test

on:
  push:
    branches: [ 'master', 'main', 'release/**' ]
  pull_request:
    branches: [ '*' ]

jobs:
  build:

    runs-on: ubuntu-latest
    timeout-minutes: 5

    steps:
    - name: Install dependencies
      run: |
        # Don't prompt for anything
        export DEBIAN_FRONTEND=noninteractive
        sudo apt-get update
        # Install mosquitto
        sudo apt-get install -y mosquitto bubblewrap

    - name: Setup mosquitto broker
      run: |
        # Disable default broker daemon
        sudo service mosquitto stop
        sleep 1
        mosquitto -v &> ~/broker.log &
        sleep 1

    - uses: actions/checkout@master
      with:
        repository: eclipse/paho.mqtt-sn.embedded-c
        path: gateway
    - name: Build gateway
      working-directory: ./gateway/MQTTSNGateway
      run: ./build.sh udp -DDEBUG -DDEBUG_NW
    - name: Write config to change broker
      working-directory: ./gateway/MQTTSNGateway/bin
      run: |
        printf "GatewayID=1\nGatewayName=PahoGateway-01\nMaxNumberOfClients=30\nKeepAlive=60\nBrokerName=localhost\nBrokerPortNo=1883\nAggregatingGateway=NO\nQoS-1=NO\nForwarder=NO\nPredefinedTopic=NO\nClientAuthentication=NO\nGatewayPortNo=10000\nMulticastPortNo=1883\nMulticastIP=225.1.1.1\nMulticastTTL=1\n" > gateway.conf
    - name: Display gateway config
      working-directory: ./gateway/MQTTSNGateway/bin
      run: more gateway.conf
    - name: Run gateway
      working-directory: ./gateway/MQTTSNGateway/bin
      run: sudo ./MQTT-SNGateway &> ~/gateway.log &
           sleep 1

    # This is some debug info useful if something goes wrong
    - name: Show network status
      run: |
        sudo ifconfig
        sudo route
        sudo netstat -tulpan

    - uses: actions/checkout@master
      with:
        repository: wolfssl/wolfssl
        path: wolfssl
    - name: wolfssl autogen
      working-directory: ./wolfssl
      run: ./autogen.sh
    - name: wolfssl configure
      working-directory: ./wolfssl
      run: ./configure --enable-enckeys
    - name: wolfssl make
      working-directory: ./wolfssl
      run: make
    - name: wolfssl make install
      working-directory: ./wolfssl
      run: sudo make install

    - uses: actions/checkout@master
    - name: wolfmqtt autogen
      run: ./autogen.sh

    - name: wolfmqtt configure with SN Enabled
      run: |
        export WOLFMQTT_NO_EXTERNAL_BROKER_TESTS=1
        ./configure --enable-sn
    - name: wolfmqtt make
      run: make

    - name: test SN Client
      run: ./examples/sn-client/sn-client -T

    # Cleanup
    - name: Stop gateway
      if: failure() || cancelled()
      run: |
        sudo kill -2 $(pgrep -f "MQTT-SNGateway")
        sleep 3
        sudo kill -2 $(pgrep -f "mosquitto")
        sleep 1

    # capture logs on failure
    - name: Show logs on failure
      if: failure() || cancelled()
      run: |
        sudo cat ~/gateway.log
        sudo cat ~/broker.log