User manual
This is the entry point of the software. This page appears when you launch AC2RD.
This page appears after the splash screen, the first time you launch AC2RD. It describes the terms of use of the software. You must accept them to access all the features of AC2RD.
This is the main menu of AC2RD. It is divided into two tabs : a Home tab to monitor the software, and a Records tab for accessing phone and voice recordings. In addition, the main menu gives access to a sliding bar (on the left) redirecting to the software settings, the logbook, the about page, or closing the software.
The Home tab allows you to monitor the software (visualization of important information, and access to shortcuts on the main functionalities of the software). It is divided into 3 categories: general state, call recorder, and dictaphone.
The general state returns information about the recorder status, the ongoing action, the storage path, and the available space.
The recorder status is either inactive or in recording mode.
The ongoing action can be an incoming call, an outgoing call, the dictaphone, or nothing.
Storage indicates the storage path of the records.
Available space indicates via a progress bar the available space on the phone memory.
Call recorder allows the call recorder to be activated / deactivated. It also indicates the status of the phone call.
The switch enables / disables the call recorder.
The call status can be free, ringing, or off hook.
Dictaphone is composed of two buttons: one to start a voice recording, the other to stop the current voice recording.
Starts a new voice recording (if no recording is in progress).
Stops the current voice recording (if it exists).
The Records tab provides access to phone and voice records. It is possible to sort these records by type, or by date. A simple click gives you access to a list of possible actions: replay the recording, add a description, lock / save the recording, and delete the recording (if it is not locked). A long click displays detailed information about the selected record.
The replayer is accessible via the Records tab, when a phone or voice records is selected for replay. On this page, it is possible to perform the classic play / pause commands, but also to position the start of the replay where you want via the seekbar. When the replay is launched, an audio spectrum is displayed (if enabled).
The software settings can be accessed via the sliding bar of the main menu. Through this section, you can set your software as you wish.
This option activates the call recording service.
This option activates the call filters.
This option allows recording when the phone shake.
This option defines the call filter
This option defines the source of the audio stream to be recorded.
This option enables volume boost.
This option sets the audio format of records.
This option allows you to configure the display of the audio spectrum during replay.
This option sets the record storage directory.
This option enables the purge of obsolete records.
This option sets the purge frequency of obsolete records.
This option sets the retention time for records.
This option enables logging of internal software events.
This option enables notifications.
This option triggers a sound for each new notification.
This option triggers a vibration for each new notification.
This option enables the LED for each new notification.
This option activates information messages that appear on the screen.
This option enables the splash screen when the software is launched.
This option allows you to define the theme of the software.
This option allows you to define the theme color to be used in the software.
This option is used to define the language to be used in the software.
TODO
TODO
