A breakout board for the HX711 load cell weight measuring amplifier

An open source board for load cell reading and configuration based on the HX711 and ATmega328.

An Arduino library to interface with load cells using the Qwiic interface and the NAU7802.

Raspberry Pi HX711 C++ Library

A PCB to combine four individual strain gauges or load sensors into the standard wheat bridge configuration and 4-color wiring found on load cells.

Implementation of single and multiple HX711 use via RP2040's state machine

A scale API for a Raspberry Pi Pico (RP2040) using the hx711-pico-c library.

Python bindings for Raspberry Pi HX711 C++ Library

CS5530 Weight scale sensor

Design for the science olympiad detector building device (2022-2023 season)

A Raspberry Pi Library to interface Avia Semiconductor HX711 24-Bit Analog-to-Digital Converter (ADC) for Weight Scales

A linux library to interface with load cells using NAU7802.

A library to stabilize load cell readings

HX711 Load cell Raspberry Pi Java class for Pi4j

Breakout board to sample 3-axis load cells with I2C interface

An I2C based interface to load cells and other wheatstone based strain gauges.

MicroPython implementation of HX711 use via RP2040's state machine

Arduino Wemos D1 basic seismometer. Creates SD card file, opens, writes, prints out. Tested with 64GB SD. Takes reading when values above / below set limits. XFW-HX711 Load Cell A2D. RTC DS1307. WeMos Micro SD Shield. IDE Info = WeMos D1R1 (ESP8266 Boards 2.5.2), upload 921600, 80MHz, WeMos D1R1 Boards 2

A load cell measures the weight using strain gauges. The difference between the length of the load cell at one side of the cell will help in determining the weight that is applied to it. This will change the output impedance. The output impedance is integrated into a Wheatstone bridge where the difference of the output impedance determines and c…