Skip to content

Latest commit

 

History

History
81 lines (58 loc) · 6.71 KB

NetworkPkgNotes.md

File metadata and controls

81 lines (58 loc) · 6.71 KB

UDK2018 NetworkPkg Notes

  1. New Features and Changes
  2. Package Interface Changes
  3. UEFI/PI Specification Compliance
  4. Known Issues

NEW FEATURES AND CHANGES

  1. Update network stack drivers (DHCP6, DNS, iSCSI, PXE and HTTP Boot) to check the "Network Media State" type of AIP protocol, and wait the NIC to restore the network connection if EFI_NOT_READY is returned.

  2. HTTP Boot Update

    1. Display more HTTP boot error messages which could help user to identify the problem. For example, if an HTTP Redirect response is received, the HTTP 3xx Redirection status code will be displayed, together with the new URI address of the HTTP boot image.
    2. Add EFI_HTTP_BOOT_CALLBACK_PROTOCOL support.
    3. Add DNS device path node to the file path of an HTTP boot option.
    4. The "IPv6 Support from UNDI" type of AIP protocol is checked before start HTTP Boot over IPv6.
    5. Fix a bug in HTTP Boot configuration form that an invalid URI address may corrupt the setup screen.

  3. IP6 Update

    1. Fix a bug that IP6 PXE boot option may disappear if IPv6 policy is changed.
    2. Update Ip6Config.SetData() to clean up certain configuration data.
    3. Fix a bug that Ip6IpSecProcessPacket() is always called to locate IpSec protocol even the IpSec protocol has not been installed.

  4. HTTP Update

    1. Add HTTP PATCH method support.
    2. Fix a bug that duplicate data in message body is returned to caller.

  5. iSCSI Update

    1. Allow "iSCSIISID:#" keyword to be configured with a value of length 6 (only last 3 bytes) or 12 (full ISID) according to the x-UEFI keyword definition in http://uefi.org/confignamespace.
    2. Fix the incorrect maximum length of iSCSI keyword "iSCSIInitiatorIpAddress:#", "iSCSIInitiatorNetmask:#", "iSCSIInitiatorGateway:#" and "iSCSITargetIpAddress:#".
    3. Remove the redundant '/' character in the returned "ISCSIMacAddr" keyword.
    4. Fix a bug that DHCP is started incorrectly if an iSCSI attempt is not associated with the current NIC.
    5. The iSCSI configuration form is updated to display the initiator configuration retrieved from DHCP service.
    6. The "IPv6 Support from UNDI" type of AIP protocol is checked before start iSCSI boot over IPv6.
    7. Fix a bug in iSCSI configuration form that undeleted TargetIp address from previous displayed attempt page will be saved to new created attempt.
    8. Fix an iSCSI connection failure when Target info is first set to retrieve from DHCP then static configured.
    9. Fix an iSCSI connection failure when the target info is retrieved from DHCP and expressed as URI format.

  6. DNS Update

    1. Fix a bug that caller configured RetryCount/RetryInterval is not correct used according to UEFI specification.

  7. DHCP6 Update

    1. Media present status is checked before starting DHCP process.

  8. PXE Update

    1. Fix a bug that incorrect return status code is used if no valid PXE offer received in PXE.Dhcp() interface.
    2. Fix a bug in PXE.SetStationIp() that the StationIp/SubnetMask address should not be modified if the input NewStationIP/NewSubnetMask parameter is NULL.
    3. Add warning debug message if PXE failed to read the system GUID from Smbios.

PACKAGE INTERFACE CHANGES

  1. Remove ping6 and ifconfig6 shell application.
    Edk II has duplicated ping6/ifconfig6 implementation in NetworkPkg and ShellPkg. The usage and parameter format of these 2 versions are exactly the same. These two commands have been added to UEFI Shell specification, so the copy under ShellPkg\Library\UefiShellNetwork2CommandsLib\ will be actively maintained in future, and the NetworkPkg copy is deleted.

UEFI PI SPECIFICATION COMPLIANCE

  1. Add EFI_HTTP_BOOT_CALLBACK_PROTOCOL support as described in section 24.7.6 in UEFI 2.7 A. The HTTP Boot driver has been updated to support the EFI HTTP Boot Callback Protocol. The new protocol will be invoked when the HTTP Boot driver is about to transmit or has received a packet. A default implementation of the new protocol to display the boot file download progress in percentage format will be installed if the platform doesn't provide one.

  2. UEFI 2.7 A adds clarification to EFI_IP6_CONFIG_PROTOCOL.SetData() to clear certain data types with zero value of the DataSize parameter. The IP6 driver is updated to support this feature.

  3. The "IPV6 Support from UNDI" type is checked before starting IPv6 iSCSI/HTTP Boot according to section 11.12.4 "IPV6 Support from UNDI" in UEFI 2.7 A.

KNOWN ISSUES

  1. iSCSI remote OS installation/boot with IPsec enabled. In the current implementation, iSCSI driver is capable to access the storage server in pre-OS environment when IPsec is enabled; while iSCSI remote OS installation/boot cannot work with IPsec since the IPsec required parameters are not conveyed to operating system. One possible way to handover such parameters to the operating system is to use the GUIDed device path.

  2. iSCSI NOP-Out package is not supported. In the current implementation, iSCSI NOP-Out feature is not supported. Upon receipt of a NOP-In with the "Target Transfer Tag" set to a valid value rather than default 0xFFFFFFFF, the connection may break down. User need to close the NOP-In feature in iSCSI target side to avoid the this failure.

  3. iSCSI connection problem when IpSec IKEv2 enabled. Due to the UEFI driver model limitation, the IpSec driver may have not been started when iSCSI driver trying to initialize the connection with iSCSI target. This will make iSCSI connection fail if IpSec IKEv2 is configured to use. User can establish the iSCSI connection first before IpSec enabled to workaround this issue.

  4. Initiate PXE/HTTP Boot over Wi-Fi network immediately after system reset is not supported. The Wi-Fi device requires extra time to connect to AP, which couldn't be finished before the boot options are loaded automatically. User could go to the Boot Manager menu to select and start the PXE/HTTP Boot after Wi-Fi network is connected.

  5. iSCSI connection problem over Wi-Fi network. Due to the UEFI driver model limitation, the Wi-Fi device can't connect to AP when iSCSI driver trying to initialize the connection with iSCSI target. This will make iSCSI connection fail over Wi-Fi network. User can load iSCSI driver from UEFI shell after Wi-Fi network is connected to workaround this issue.