A wavetable style oscillator - with three seperate oscillators - where you can (and need to) capture your own waves.
Supports polyphony.
To capture a wavetable connect audio to WAVE TOP, MIDDLE and BOTTOM and press CAPTURE. This will record the incoming audio to the respectively the top, middle and bottom positions in the wavetable. Intermediate values are automatically interpolated.
Connect SYNC from your oscillator to sync the recording to one single cycle. If not connected 2048 samples will be recorded.
MIRROR mirrors the recorded wave at the halfway point.
FREQ and FINE determines the coarse and fine tuning of the output. CV for FREQ is 1 volt per octave.
POS determines the vertical position in the wavetable.
These are seperate oscillators using the same wavetable that can be turned on and off individually using ENABLE.
DETUNE offsets the pitch reletive to the main oscillator.
POS offsets the vertical position in the wavetable relative to the main oscillator.
SYNC enables oscillator hard sync agains the chosen oscillator. To hear the effect detune the oscillator.
- You can turn off the scope via the modules context menu (right click) to improve UI performance.
- The wavetable is saved as part of your save file, so you can pass it on to others easily.
