Skip to content

Configuration Settings

Tim Eckel edited this page Dec 28, 2018 · 48 revisions

Press the Menu button (Shift on X-Lite, SYS or Horus) to display the configuration options menu:

  • Use the dial or +/- buttons to cycle through the menu or select the desired setting
  • Press Enter/dial to select and deselect a menu option
  • Press Exit or RTN to deselect a menu option or escape the configuration menu

sample

  • Battery View - Total battery voltage / Cell voltage average (default: Total)
  • Battery Alert - All battery alerts on, off or only critical alerts (default: All)
  • Cell Low - Cell voltage for low battery warning (default: 3.5V) [help]
  • Cell Critical - Cell voltage for battery critical warning (default: 3.4V) [help]
  • Fuel Unit - Match to INAV CLI value smartport_fuel_unit (default: Percent) [help]
  • Fuel Low - Fuel percentage for low battery warning (default: 30%) [help]
  • Fuel Critical - Fuel percentage for battery critical warning (default: 20%) [help]
  • Altitude Alert - Turn on or off the altitude alert (default: On)
  • Max Altitude - Altitude warning starts when over this value (default: 400' or 120m)
  • Timer - Show the automatic flight timer, timer1-3 or turn timer off (default: Auto)
  • Tx Voltage - Show transmitter voltage as graph and/or numerical value (default: Both or Graph)
  • Rx Voltage - Turn on or off the receiver voltage in the title (default: On)
  • Variometer - Vertical speed graph, voice notifications or off (default: Off)
  • Vario Steps - If Variometer is set to Voice, select the altitude steps (default: 10' or 10m)
  • Voice Alerts - All voice alerts on, off or only critical alerts (default: All)
  • Feedback - Turn beeper and/or haptic feedback for alerts on or off (default: All)
  • RTH Feedback - Return to home beeper and haptic feedback on or off (default: On)
  • HeadFree Feedback - Head free beeper and haptic feedback on or off (default: On)
  • RSSI Feedback - RSSI beeper and haptic feedback on or off (default: On)
  • AltHold Center FB - Hepatic/audio feedback for Alt Hold center throttle position (default: Off)
  • Speed Sensor - Speed sensor to use, GPS or (if available) Pitot air speed (default: GPS)
  • View Mode - Classic, pilot, or radar view modes (default: Classic)
  • GPS HDOP View - View the GPS accuracy (HDOP) as a Graph or Decimal (default: Graph)
  • GPS Warning - GPS accuracy (HDOP) to trigger warning (default: > 3.5 HDOP [at least 1 bar])
  • GPS Coordinates - GPS coordinates as decimal or degrees/minutes format (default: Decimal)
  • GPS - Not a configuration option, shows the last GPS fix coordinates