99-sp-ftdi-d2xx.rules

#
# This file is part of SerialPundit.
# 
# Copyright (C) 2014-2016, Rishi Gupta. All rights reserved.
#
# The SerialPundit is DUAL LICENSED. It is made available under the terms of the GNU Affero 
# General Public License (AGPL) v3.0 for non-commercial use and under the terms of a commercial 
# license for commercial use of this software. 
#
# The SerialPundit is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; 
# without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
#################################################################################################

# This is a udev rule file for all devices from FTDI with VID 0x0403 (not specific to any
# FTDI product (USB PID)). Place this file in /etc/udev/rules.d/ for Ubuntu Linux distro.

# These rules will grant read and write access to all users, include non-privileged users, for all 
# USB devices that have a matching Vendor ID according to the rules below. If required, more 
# restrictions on access to these devices can be achieved. Please learn more about writing udev 
# rules for putting more restrctions. It is possible to set up a group or user owner for accessing 
# a specific device.

# This file can be renamed as per the requirement. After putting it in /etc/udev/rules.d/ directory 
# udev need not be restarted. Just un-lug or plug the device in USB port again. Also vendor ID and 
# Product ID may be case sensitive. Please use dmesg to check device information when device is 
# plugged in system. System supplied default rules are generally placed in /lib/udev/rules.d and gets
# overridden by rules placed in /etc/udev/rules.d directory.

# We can also add user to dialout group if it is not member of dialout group.
# $groups YOURUSERNAME
# $sudo gpasswd --add YOURUSERNAME dialout
# Logout then login and then insert the USB-UART device.

# It may be required to reload udev rules if the udev rule file is added in running system.
# $ sudo udevadm control --reload-rules
# $ sudo udevadm trigger --attr-match=subsystem=tty

ACTION=="remove", GOTO="ftdi_usb_uart_end"
SUBSYSTEM!="tty", GOTO="ftdi_usb_uart_end"

SUBSYSTEM=="tty", ATTRS{idVendor}=="0403", MODE="0666"

# If we want to load these rules for a specific USB product with product ID, here is how to do it.
# FT232BM/L/Q, FT245BM/L/Q, FT232RL/Q, FT245RL/Q, VNC1L with VDPS Firmware.
# SUBSYSTEM=="tty", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", MODE="0666"

# FT232H
# SUBSYSTEM=="tty", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6014", MODE="0666"

# FT232B (EESK can change PID from 6001 to 6004)
# SUBSYSTEM=="tty", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", MODE="0666"
# SUBSYSTEM=="tty", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6004", MODE="0666"

# FT230X
# SUBSYSTEM=="tty", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6015", MODE="0666"

# FT2232C/D/L, FT2232HL/Q
# SUBSYSTEM=="tty", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6010", MODE="0666"

# FT4222H
# SUBSYSTEM=="tty", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="601C", MODE="0666"

# FT4232HL/Q
# SUBSYSTEM=="tty", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6011", MODE="0666"

LABEL="ftdi_usb_uart_end"