Skip to content

Latest commit

 

History

History
115 lines (78 loc) · 9.55 KB

seed_settings.md

File metadata and controls

115 lines (78 loc) · 9.55 KB

Settings for Seeds

The Seed resource offers a few settings that are used to control the behaviour of certain Gardener components. This document provides an overview over the available settings:

Dependency Watchdog

Gardenlet can deploy two instances of the dependency-watchdog into the garden namespace of the seed cluster. One instance only activates the weeder while the second instance only activates the prober.

Weeder

The weeder helps to alleviate the delay where control plane components remain unavailable by finding the respective pods in CrashLoopBackoff status and restarting them once their dependants become ready and available again. For example, if etcd goes down then also kube-apiserver goes down (and into a CrashLoopBackoff state). If etcd comes up again then (without the endpoint controller) it might take some time until kube-apiserver gets restarted as well.

⚠️ .spec.settings.dependencyWatchdog.endpoint.enabled is deprecated and will be removed in a future version of Gardener. Use .spec.settings.dependencyWatchdog.weeder.enabled instead.

It can be enabled/disabled via the .spec.settings.dependencyWatchdog.endpoint.enabled field. It defaults to true.

Prober

The probe controller scales down the kube-controller-manager of shoot clusters in case their respective kube-apiserver is not reachable via its external ingress. This is in order to avoid melt-down situations, since the kube-controller-manager uses in-cluster communication when talking to the kube-apiserver, i.e., it wouldn't be affected if the external access to the kube-apiserver is interrupted for whatever reason. The kubelets on the shoot worker nodes, however, would indeed be affected since they typically run in different networks and use the external ingress when talking to the kube-apiserver. Hence, without scaling down kube-controller-manager, the nodes might be marked as NotReady and eventually replaced (since the kubelets cannot report their status anymore). To prevent such unnecessary turbulences, kube-controller-manager is being scaled down until the external ingress becomes available again. In addition, as a precautionary measure, machine-controller-manager is also scaled down, along with cluster-autoscaler which depends on machine-controller-manager.

⚠️ .spec.settings.dependencyWatchdog.probe.enabled is deprecated and will be removed in a future version of Gardener. Use .spec.settings.dependencyWatchdog.prober.enabled instead.

It can be enabled/disabled via the .spec.settings.dependencyWatchdog.probe.enabled field. It defaults to true.

Reserve Excess Capacity

If the excess capacity reservation is enabled, then the gardenlet will deploy a special Deployment into the garden namespace of the seed cluster. This Deployment's pod template has only one container, the pause container, which simply runs in an infinite loop. The priority of the deployment is very low, so any other pod will preempt these pause pods. This is especially useful if new shoot control planes are created in the seed. In case the seed cluster runs at its capacity, then there is no waiting time required during the scale-up. Instead, the low-priority pause pods will be preempted and allow newly created shoot control plane pods to be scheduled fast. In the meantime, the cluster-autoscaler will trigger the scale-up because the preempted pause pods want to run again. However, this delay doesn't affect the important shoot control plane pods, which will improve the user experience.

Use .spec.settings.excessCapacityReservation.configs to create excess capacity reservation deployments which allow to specify custom values for resources, nodeSelector and tolerations. Each config creates a deployment with a minium number of 2 replicas and a maximum equal to the number of zones configured for this seed.
It defaults to a config reserving 2 CPUs and 6Gi of memory for each pod with no nodeSelector and no tolerations.

Excess capacity reservation is enabled when .spec.settings.excessCapacityReservation.enabled is true or not specified while configs are present. It can be disabled by setting the field to false.

Scheduling

By default, the Gardener Scheduler will consider all seed clusters when a new shoot cluster shall be created. However, administrators/operators might want to exclude some of them from being considered by the scheduler. Therefore, seed clusters can be marked as "invisible". In this case, the scheduler simply ignores them as if they wouldn't exist. Shoots can still use the invisible seed but only by explicitly specifying the name in their .spec.seedName field.

Seed clusters can be marked visible/invisible via the .spec.settings.scheduling.visible field. It defaults to true.

ℹ️ In previous Gardener versions (< 1.5) these settings were controlled via taint keys (seed.gardener.cloud/{disable-capacity-reservation,invisible}). The taint keys are no longer supported and removed in version 1.12. The rationale behind it is the implementation of tolerations similar to Kubernetes tolerations. More information about it can be found in #2193.

Load Balancer Services

Gardener creates certain Kubernetes Service objects of type LoadBalancer in the seed cluster. Most prominently, they are used for exposing the shoot control planes, namely the kube-apiserver of the shoot clusters. In most cases, the cloud-controller-manager (responsible for managing these load balancers on the respective underlying infrastructure) supports certain customization and settings via annotations. This document provides a good overview and many examples.

By setting the .spec.settings.loadBalancerServices.annotations field the Gardener administrator can specify a list of annotations, which will be injected into the Services of type LoadBalancer.

External Traffic Policy

Setting the external traffic policy to Local can be beneficial as it preserves the source IP address of client requests. In addition to that, it removes one hop in the data path and hence reduces request latency. On some cloud infrastructures, it can furthermore be used in conjunction with Service annotations as described above to prevent cross-zonal traffic from the load balancer to the backend pod.

The default external traffic policy is Cluster, meaning that all traffic from the load balancer will be sent to any cluster node, which then itself will redirect the traffic to the actual receiving pod. This approach adds a node to the data path, may cross the zone boundaries twice, and replaces the source IP with one of the cluster nodes.

External Traffic Policy Cluster

Using external traffic policy Local drops the additional node, i.e., only cluster nodes with corresponding backend pods will be in the list of backends of the load balancer. However, this has multiple implications. The health check port in this scenario is exposed by kube-proxy , i.e., if kube-proxy is not working on a node a corresponding pod on the node will not receive traffic from the load balancer as the load balancer will see a failing health check. (This is quite different from ordinary service routing where kube-proxy is only responsible for setup, but does not need to run for its operation.) Furthermore, load balancing may become imbalanced if multiple pods run on the same node because load balancers will split the load equally among the nodes and not among the pods. This is mitigated by corresponding node anti affinities.

External Traffic Policy Local

Operators need to take these implications into account when considering switching external traffic policy to Local.

Zone-Specific Settings

In case a seed cluster is configured to use multiple zones via .spec.provider.zones, it may be necessary to configure the load balancers in individual zones in different way, e.g., by utilizing different annotations. One reason may be to reduce cross-zonal traffic and have zone-specific load balancers in place. Zone-specific load balancers may then be bound to zone-specific subnets or availability zones in the cloud infrastructure.

Besides the load balancer annotations, it is also possible to set the external traffic policy for each zone-specific load balancer individually.

Vertical Pod Autoscaler

Gardener heavily relies on the Kubernetes vertical-pod-autoscaler component. By default, the seed controller deploys the VPA components into the garden namespace of the respective seed clusters. In case you want to manage the VPA deployment on your own or have a custom one, then you might want to disable the automatic deployment of Gardener. Otherwise, you might end up with two VPAs, which will cause erratic behaviour. By setting the .spec.settings.verticalPodAutoscaler.enabled=false, you can disable the automatic deployment.

⚠️ In any case, there must be a VPA available for your seed cluster. Using a seed without VPA is not supported.

Topology-Aware Traffic Routing

Refer to the Topology-Aware Traffic Routing documentation as this document contains the documentation for the topology-aware routing Seed setting.